2019 -2021 CHEVY SILVERADO / GMC SIERRA AMP AND SUB INSTALL

2019 -2021 CHEVY SILVERADO / GMC SIERRA AMP AND SUB INSTALL
#SILVERADO #GMCSIERRA #AMPINSTALL
WE INSTALL AN AUDIO DYNAMICS SUB AND AMP INTO THIS 2020 GMC SIERRA DENALI WITH A CUSTOM FIT ENCLOSURE FOR TWO TENS UNDER THE REAT SEAT. HERE IS ALL THE PARTS LISTED BELOW WE USED FOR THIS INSTALL INCLUDING LINE OUTPUT CONVERTER, AMP KIT, SUB ENCLOSURE, AND AUDIO DYNAMICS PRODUCTS PLEASE EMAIL US FOR MORE INFO.
[e-mail]
SNI-35 PAC AUDIO TO PURCHASE ----
amzn.to/2QGshzR
SNI-15
amzn.to/3tCcv7B
SNI-50A
amzn.to/3tF2Flj
WITH REMOTE TURN ON---
amzn.to/3tEpCoG
PAC LP7 WITH REMOTE TURN ON AND BASS KNOB----
amzn.to/3dBhpvQ
KICKER 46----
amzn.to/3dzEsY0
AMP KIT -----
amzn.to/3tV0KZX
amzn.to/32SQu8W
amzn.to/3dUdz10
PORTED ENCLOSURE------
12 INCH ---- amzn.to/3ZprEIY
SUB ENCLOSURE ----
DUAL 12 ----amzn.to/3ZAgQbH
DUAL 10 ----amzn.to/3GKeO0c
DUAL 10------amzn.to/3H7adGP
SUB ENCLOSURE ----
amzn.to/3gFU1iQ
amzn.to/3xtlVVm
amzn.to/3gIvQ3s
KZbin CHANNEL CAPTURING THE AUTOMOTIVE LIFESTYLE IN CUSTOM FABRICATION. THIS CHANNEL IS BUILT AROUND ALL THE SHOPS / AFFILIATES WE COME INTO CONTACT WITH EVERYDAY. WE FEATURE HOW TO'S, BUILDS, TUTORIALS, EVENTS & SHOWS, PRODUCT REVIEWS, AUTOMOTIVE LIFESTYLE, AND EVERYDAY LIFE.
ANY QUESTIONS OR IDEAS SEND US A MESSAGE [e-mail] or
[e-mail]
INSTAGRAM -
- / customfabgarage
- / rdfablife
- / roguedevelopment
- / drivenautosalon
FACEBOOK -
- / customfabgarage
- / octanetvshow
- / dasdrivenautosalon
WEBSITE-
-
- www.drivenautosalon.com
CAR AUDIO
CAR STEREO
CUSTOM INSTALL
FABRICATION AND FAB WORK
REMOTE STARTS AND INSTALL
COMPUSTAR
NUSTART
ARCTIC START
CARBON FIBER
FIBERGLASS
INTERIOR REDESIGN
EXTERIOR REDESIGN
PAINT WORK AND BODYWORK
PAINT CORRECTION
AUDIO AND VIDEO
MOBILE VIDEO
WHEELS AND TIRES
SUSPENSION

[@carloscantu5510]

Thank you so much for that example man.. if anybody is looking to do this! it works I did it myself with one of my friends on a 2020 Denali and it sounds amazing. Thank you sir for sharing this!!!

[@octanetvchannel]

You are welcome!

[@chadderpepper]

Really appreciate this video. My 2020 chevy 2500 HD did not come with a sub so I thought I was out of luck and had to tap doors. Your video saved me.yellow wires in the kick panel on 20chevy too.. triple what a door speaker sub gave me on my amp side

[@aydenhart5256]

THANK YOU!!! We had a JL W7 10” put in our 2020 Silverado. When they hooked it up it sounded terrible it had no power and it had all ranges of audio coming through. (We have a JL 1000watt amp). We looked and they hooked it up through the left rear speaker. We have spent so much time trying to find out why it did not sound good. I saw this video and saw about the yellow wires and looked and even ours has it, we do not have the bose upgrade either. We just hooked it up that way and it sounds amazing. THANK YOU!

[@octanetvchannel]

You are welcome!

[@reyorosco5617]

@@octanetvchannel I am looking to install a Kicker HS8 Hideaway on a 2022 Silverado 2500 non bose, the only connections I am worried about is the speaker wires, where can I tap into the speaker wires in this truck? Or can I wire it like this video, by converting the speaker wires to rca’s and then connecting them to that high to low converter and then to the yellow wires?? Please help

[@octanetvchannel]

@@reyorosco5617 if you look at our recent videos from the past few weeks we just posted up a non Bose Chevy Silverado we did it will walk you through everything

[@stiffdiffify]

Can you please let me know. When i connect the yellow and yellow/black wires do i connect the right&left speaker postive to one then right/left speaker negative? or do i just do one? Thanks for the help

[@colbygivhan182]

I do not see yellow/black wires in that wiring harness.. is there different factory sub speaker wires?

[@limpit8416]

Awesome install. You have a widening diagram for this for running the yellow wires and the high/low rca’s?

[@jasong268]

I just got a 2022 silverado 2500hd, no bose. Do you know if those yellow wires would be in the same location, or same wire color for mine?

[@thecableguy1128]

Thanks for your videos. I used it to install my own amplifier and subs in my 2021 hd. Have you installed any 2022 Yukon’s? I would like to know what wires to use for an amplifier install. Thanks

[@jamesmanuel9938]

Does all installs need a high/low device? I have a 2022 GMS AT4 (refresh). I just took out my old amp and sub from the 2021 Silverado and did not see such a device.

[@thomasdearing7718]

What is the brand of the box. I have 2 fosgate 12 t1 subs I want to install under my seat. I need at least a 6.75 mounting depth and preferably a ported box.

[@RicardoGomez-qg9rn]

I got a question for you which one is the power and which one is the negative and the speaker one

[@santosflores7759]

Did you connect the the positive from left and right speaker and negative left and right together from the inlet add on amplifier adapter?

[@mannie602_is_my_IG]

Im trying to figure this out as I heard the computer shuts down bass notes peaks to protect factory speakers. So with that i hear you get suppressed bass lows

[@TeeCamp10]

I'm coming from a 2019 Ford with the B&O sound system. It was terrible just hooking up a hi to low set-up as it used voltage to regulate the amount of volume the sub had. So when it was low volume it was too much bass, and hi volume it would roll off dramatically to protect itself. Do these Bose systems do the same? I really don't want to have to do the digital to analog conversion just to get a clean signal and have gains set properly

[@octanetvchannel]

It does not you should be fine

[@braco38]

What wires did you connect to the high to low?

[@sirdir5004]

Could my sound system cause intermittent starting I put the remote where she put it and my truck has been doing intermittent starting does anyone know what that fuse goes too that you’re tapping into for the remote

[@jamesmanuel9938]

Has anyone installed on Amp on a 2022 Sierra AT4. The right side fuse box has no extra lugs for remote install. What location or fuse did you have to connect the remote wire? I would guess if no extra fuse blade location available one used a add a fuse link in say an 10 amp fuse location that only turns on while the ignition is on?

[@javier454ss3]

Will the lc2i work ? I have 2021 gmc Denali with bose

[@cotx79]

Looks great! If a Silverado doesn’t have a bose system and a bass like to tap into, would better sound come out if you tap into the front door speakers or the rears? I’ve heard different opinions. I’m going to hook up an LC2i. Any direction and advice would be appreciated! God bless!

[@TexasSean]

If you haven’t done your install yet, instead of tapping your doors, look up LLJ customs they sell a harness that will connect into a lc2i clean install plug and play.

[@TruongNguyen-fc2hw]

@@TexasSean is there a benifit to connect plug and play over tapping into door? Seems like a lot more steps for an amateur like me.

[@TexasSean]

@@TruongNguyen-fc2hw yeah plug and play by llj takes 10 seconds, why take off door panels.

[@SpookyMontero]

Clean hopefully it’s just as easier on my 22

[@philochoa642]

With the amp in that location does it cause any overheating issues? I'll be installing a 1500 mono with 2 american bass 12s. Just wondering about the airflow behind the box.

[@octanetvchannel]

Not with these amps

[@LuisEspinoza.]

Since I have a non Bose system do I just tap one set into the right rear speakers and one set into the left rear ?

[@octanetvchannel]

You only have to tap into one speaker it is a mono signal

[@mattp6754]

Did the yellow braided wires work for the LOC?

[@octanetvchannel]

Yes the exact ones in the video are the ones you will want to use

[@teaswift]

very nice install can you tell me which audio dynamics 10" subwoofers you installed in that QPower QBGMC10 2019 enclosure

[@octanetvchannel]

2000 series

[@diddycb7]

Great video. Do you have the link to the sub box? The links listed in the description show a completely different style of box. Thanks!

[@octanetvchannel]

Most of them I have seen are out of stock. I'll try to see what I can do about finding someone who can either make one or has them available

[@ErikReidt]

My 22 refresh doesn’t have the yellow and black wires. Any idea what color wires I should tap into?

[@ErikReidt]

yes I have Bose with a sub :)

[@kaylanwoytas4744]

There is probley a open data pin somewhere to use for remote wire , so don't have to run off fuse box

[@bknoxx]

clean install.. all finger rings in 2021 is a no no lol

[@jamesbruno6648]

The yellow wires. Witch one is positive and negative? Thxs

[@jamesbruno6648]

Just found out yellow + & yellow /Black - passenger door, drivers door drives door blue + and brown/ blue -, Thxs.

[@ericperry4934]

where did you mont the amp?

[@shakenbake11]

with a set up like this, does the factory sub still play same as the new sub?

[@octanetvchannel]

It can yes

[@brianvernon7277]

Do you have a new link for the enclosure’s? Amazon says those are not available 2020 Silverado with Bose

[@octanetvchannel]

I will check but it seems like everybody's out of stock

[@Railerman21]

Where did you put the ground for the high to low and for the amp?

[@octanetvchannel]

You don't need to ground it

[@sevyn13]

What are the plastic things you used to tap into the yellow high line? Happen to have a link to buy them?

[@octanetvchannel]

3m t taps

[@jonathonnolen4721]

What did you end up doing with the studs ? Cut em off ?

[@octanetvchannel]

We left them in there because it did not affect the Box

[@shannonroyer9895]

What wires from the converter go to the yellow wires. the two positives to one and the two negatives to the other?

[@blakepayne3345]

We’re you ever able to found out the wiring? Cause I have the same question

[@santosflores7759]

I have the same question did you ever figure it out? Need help don't want to connect and have a shortage I found the yellow cables for the sub but my add on amplifier adapter have left and right speaker inlets

[@ericroybal2227]

for Silverados without factory sub, the yellow-black wire is Front Right (-) and the yellow wire is Front Right (+) in this video, It may be a sub wire for a denali that has a factory sub. find the corresponding wires on your LOC. should be labeled on the LOC housing or in the instructions. YE/BK = Right Front Speaker Signal (-) YE = Right Front Speaker Signal (+) BN/BU - Left Front Speaker Signal (-) BN - Left Front Speaker Signal (+) No Ground. Just capped them. this is how I wired my 2021 Trail Boss and it worked nicely.

[@laleydeiguala6367]

And this install you disconnect bluetooth mic because here on houston the make too much problem to install mu amp and subwoofer because seeing maybe little noise maybe yes maybe not please help me

[@octanetvchannel]

No we did not mess with the Bluetooth mic

[@laleydeiguala6367]

@@octanetvchannel tanks isee another video doing the something i ready order the sain rca converter question rockford fosgate rx5001d is good for 2 kicker subwoofer tanks to show to every how to wiring the amp

[@RicardoGomez-qg9rn]

Already find the yellow and with the black stripe but I don't know which one is power and which one the negative thank you

[@octanetvchannel]

Are you trying to connect a line output converter to it?

[@RicardoGomez-qg9rn]

I'm trying to do a high to low

[@ericroybal2227]

for Silverados without factory sub, the yellow-black wire. is Front Right -, the yellow wire is Front Right + It may be a sub wire for a denali that has a factory sub. find the corresponding wires on your LOC. should be labeled on the LOC housing or in the instructions.

[@joseduranjr3152]

You made that work with the factory OEM BOSE sound system?

[@octanetvchannel]

Yes sir

[@ericbernard1594]

The links posted for the sub enclosure aren't for this box. Do you know the brand or where it came from?

[@octanetvchannel]

www.vividracing.com/-p-153730184.html?gclid=CjwKCAjwhYOFBhBkEiwASF3KGa61_j9OH0BI1PVMRVjoSVcFsuQEx8CXGrpDhRV8QDiVcs7MhCjVqhoCO_EQAvD_BwE

[@alonsofisher8910]

dunno if anyone gives a shit but if you're bored like me atm then you can watch all of the latest movies and series on InstaFlixxer. Have been binge watching with my brother for the last days =)

[@alessandrowyatt6271]

@Alonso Fisher yup, I have been watching on InstaFlixxer for months myself =)

[@laleydeiguala6367]

Wat amp and subwoofer you use because someone install my and i don't like the bass

[@octanetvchannel]

Audio Dynamics and let me know if we can help you to get it

[@laleydeiguala6367]

How much watts was the amp tanks

[@blakepayne3345]

Would it be the same for a 2021 GMC Sierra 1500 AT4

[@octanetvchannel]

It should be

[@blakepayne3345]

Also what wires and how did you wire the loc wires to the yellow wires? I don’t need to run the power or ground wires do I?

[@rdavis7878]

Great simple and clean install !! curious is the 21 hd Silverado any different on wiring and locations??

[@octanetvchannel]

I don't believe it is different. It should be the same

[@jonathonnolen4721]

@@octanetvchannel did that box fit ok with the rubber floor mat ? I have the same truck and box. I’m fixing to install it all today.

[@eliaslara3251]

Will this void my extended warranty

[@Bradbssargdons]

How do I know if I need a high to low? Its been 15 yrs since Ive installed a system. I just bought a rockford fosgate powered ported shallow fire sub 300rms. Do i need the high to low adapter? or just a standard amp wiring kit?

[@sevyn13]

A high to low adapter is to get you RCA plugs for your amp. So if your radio doesn’t have RCA plugs on the back you will have to convert a high speaker wire to a low RCA with the converter.

[@Bradbssargdons]

@@sevyn13 Exactly what I did. It was a pain getting to the front right wiring harness but managed. Easy peasy once I tapped into them

[@MarcusJKing]

@@sevyn13what if your sub has an amp built in and has the low pass filter knob? Cuz on my Acadia I tapped into the rear speaker by soldering the RCA in parallel with it. Of course sleeve was - and the inner wire was +. Basically I’m wondering if I still need a high to low (I think it’s also called LOC?) if there a low pass filter already on the amp. Otherwise it seemed like my Acadia setup was doing just fine as long as the low pass filter was set lower. Also the sub+amp combo has low and high inputs…I was using low inputs. But should I have just used high inputs instead?

[@Victor-gome]

No need ANC bypass?

[@octanetvchannel]

We did not

[@DomLikesBass]

can anyone tell me the name of the beat that starts playing at 1:10?

[@willshenderson6200]

Blood by Cushy

[@loudelvis610]

Lol....the generic rhino lined boxes are really nice.....lol yea...

[@DBD801]

I got a question and this isn’t specific to just y’all’s channel, but what’s the point of having a “intro” we know what the video is. It’s in the title. I had to skip 2 min in just to get to the point of the video

[@BiGIVIiKe1]

What are the cut out dimensions in that box? Wasn’t sure on the websites description. I’m guessing it’s 9 1/2”?

[@ryanpuig3299]

Where did you get the box? I need one

[@octanetvchannel]

Right now they're extremely hard to get we did purchase a few of them off of eBay but I think they are out of stock almost everywhere

[@ryanpuig3299]

@@octanetvchannel oh ok. Thank you. Can you show me where you grounded the amp?

[@octanetvchannel]

@@ryanpuig3299 you can ground it underneath one of the seat bolts

[@juliosandoval8244]

Are you guys in indianapolis in

[@octanetvchannel]

Yes we are

[@GCharlesE]

I have a 24 Silverado with Bose. It's TERRIBLE! the 2018 i had previously was a much better system. How can that even be?! I finally broke down and added a shallow 12 under the back seat. Now it's serviceable 😅

[@jamescleveland5301]

Where did you get the box from

[@octanetvchannel]

www.vividracing.com/-p-153730184.html?gclid=CjwKCAjwhYOFBhBkEiwASF3KGa61_j9OH0BI1PVMRVjoSVcFsuQEx8CXGrpDhRV8QDiVcs7MhCjVqhoCO_EQAvD_BwE

[@junioralvarado4029]

Horrible video doesn't explain anything like How is the audio going into the amp and 2nd those 2 yellow wires and the panels is that the power? Or audio input who knows... And where did the audio input come from the back speakers how did you tap into that.... Did you use RC a's from the factory head unit... So much left unexplained..

[@octanetvchannel]

This video shows everything thoroughly especially detailed and step-by-step. If you don't understand the basic fundamentals of how to hook up an amplifier I would suggest taking it to a professional. Thank you for your valuable input

[@Oh_Good_Shot]

Will this work on the 2022 trail boss with boss

[@mycatmycat3786]

How does the box sound. Can I put a type r alpine in the box what brand line out converter is that . Thanks.

[@octanetvchannel]

Sounds awesome!

[@davidmeza4394]

Would it be same color wires for the non-Bose system?

[@octanetvchannel]

No they are different

[@octanetvchannel]

We will be posting up a video this week on that vehicle without bose