2019 Yamaha Waverunner Fishing Setup Ultimate fishing jet ski!

[@dacattack1036]

This is my goal when I get my jey ski. Can't wait! Sick setup!

[@chrislegend_legendary5812]

Cant beat yamaha, i had my 09 fxho cruiser set up for fishing for 9 years, never missed a beat, a great allround ski , sold now looking at another fxho...

[@GCJetskiFishing]

That is the thing about Yamaha that people will always tell you and the resale prices of these compared to other brands highlights that fact. They are great skis

[@GeraldMuir]

Nice one Coxie ... thanks for the walk around of your Jet Ski set up & looks like you've made a nice job of the custom accessories !!

[@GCJetskiFishing]

Thanks Gerald! yeah I am happy with how everything has turned out :)

[@wandadougherty6667]

Great fishing setup but would you ever consider a set of tubbys? I read that the guys from shoreline have made a new plastic version for this year.

[@GCJetskiFishing]

Thanks for the comment! I have thought about tubbys but I really don't think I need them... sure they have some good points about them like extra stability but they are a large cost, are not quickly removable like a chilli bin is, they stop you from sitting sideways and using the gunnel as a foot rest and generally just block the side of the ski

[@wandadougherty6667]

@@GCJetskiFishing You make some valid points and I definitely see why you don’t use them. However, for me, I like I idea of being about to use the boarding ladder and deck for ingress as climbing over the gunnel can be challenging at times. Of course the cost is the biggest issue and will probably deter me from purchasing them. What about your dual battery setup, do you use a switch with an acr to keep the house battery and starter battery separate or are they just wired together?

[@GCJetskiFishing]

The batteries are wired together in paralell so they are both being used at the same time and both charge at the same time, a switch introduces a point of failure. The key is to just have plenty of battery capacity for what you need and always keep them topped up on a trickle charger

[@LorenP]

Nice! Thanks for sharing. Lots of great ideas. Thumbs up from the U.S.

[@GCJetskiFishing]

Thanks mate, i'm surprised fishing from a ski isn't that big over there!

[@LorenP]

@@GCJetskiFishing In my area by the Great Lakes its not very popular. It seems more popular in the ocean states such as Florida, Texas, California, Oregon.

[@danielvinson8099]

Nice install , I really like that bracket on FX for fish finder. I been looking at 2 models FX Or GP1800R with the installing a Garmin 73sv unit.

[@GCJetskiFishing]

Hey Daniel, If you are going to kit out the ski with accessories then the FX will be a lot easier to do so

[@danielvinson8099]

@@GCJetskiFishing Thank you for your input, I will look closer to fx series for fishing and cruising around.

[@GCJetskiFishing]

@@danielvinson8099 You will not be dissapointed :)

[@SteveMullinsHoustonTXRealtor]

You can keep traditional metal anchors inside the bow hatch without damage. Have been using a 6lb Danforth Anchor for years stored inside an anchor bag with 150-300ft of rope. Nice setup.

[@GCJetskiFishing]

Thanks for watching Steve. Interesting how you haven't had problems with the anchor, do you secure it down while riding? On my old seadoo I smashed the bottom out of my front storage compartment because something heavy was bouncing around in there... learnt my lesson :)

[@SteveMullinsHoustonTXRealtor]

@@GCJetskiFishing Attached a pic on the Yamaha WaveRunner group.

[@GCJetskiFishing]

@@SteveMullinsHoustonTXRealtor thanks mate, good to see youve got things working well for you

[@MattNesbit-d8m]

Where is this Yamaha waverunner group?​@@SteveMullinsHoustonTXRealtor

[@nibalm3]

awesome setup !!!... How did you wire the transducer wire back to to the hull ???

[@GCJetskiFishing]

Thanks mate! the wire runs up the back of the ski then through a hole in the hull, sealed in with a cable cover plate (forget the proper name for these)

[@StArTy22]

Great question. I've just brought a ski but need to do this also any chance you could email me some pics of where you have run the cable up and through the Hull. Also did you screw the transducer to the ride plate? Handle different? Thanks again. Wicked skis aye man 👍🏼👌🏼

[@jarrydsexpeditions7913]

That ski is absolutely beautiful. Love the setup and awsome custom work. Great stuff mate and thanks for the walk-around. Merry Christmas

[@GCJetskiFishing]

Cheers Jarryd thanks for watching and merry xmas to you to!

[@johannesvanhoek9080]

I’m in the process now of setting up my Yamaha FX Ski , I have the rack in the back already and the cooler just need to add a few additions like the dual batteries everything else I already have, probably will set up a series of lights, thank you for the video it gave me some nice ideas about things! PS. Greetings from Florida ! you have a new subscriber 😊

[@blanchardelectrical1245]

Good work mate! glad someone has done video of different brands to mine.....almost makes me want to get a Yamaha ;-)

[@GCJetskiFishing]

Come to the dark side mate!!

[@Jetcast]

BTW GC. Do you need to be extra careful about water depths with the transducer on the ride plate? Or is there a case around it that keeps it fairly well protected? I want to get a solution to losing the bottom when at idle. It is driving me crazy....

[@GCJetskiFishing]

Paul, I have no extra protection around the transducer, care only needs to be taken when beach launching (which 99% of the time I'm not doing) But I am often running the ski up a river where it often gets shallower than 1m of water without any problems yet. As a plus it means my ski never gets beached and the hull stays in top condition so good for resale value too

[@joshbrown3743]

Just wondering why didn't you get the seadoo fish pro instead of the yamaha as the fish pro is made for fishing and has better storage, accessories and deep gunnels?

[@GCJetskiFishing]

It's personal preference really, but I think my jet ski is far superior to the fish pro :)

[@allentanner4062]

Love the jet ski very nice

[@GCJetskiFishing]

Thanks Allen!

[@jeffro7475]

I have the same rack , where did you get the bunges? Thanks for the video I'll use the pool noodles so the cooler sits high enough to open in the rack👍 my back legs are a little too short to get it level on my new ski...

[@GCJetskiFishing]

Thanks mate. My rack has a tie down strap not bungees. I also prefer my cooler to be sitting as low as possible to help with balance and centre of gravity. Thanks

[@kevinle9753]

How are you able to attach the transducer to the bottom skip plate? That looks great compared to the mount I was going to use from Loren that mounts to the right side of the step ladder. Do you have use a transducer cover and use adhesive to attach it to the bottom plate?

[@GCJetskiFishing]

It is bolted through the ride plate so very secure. It does however mean that you cannot beach your ski completely. It gives you very good sounder readings

[@xentrik1]

Didnt you used to have a sea doo? Could you explain why you went with the yamaha instead this time?

[@GCJetskiFishing]

Yes thats correct I did used to have a seadoo. Basically the reason I bought a Seadoo originally was because I couldnt afford a Yamaha at the time

[@phil2537]

Is the FF mount able to be mounted above rod holders? Nice option to troll off both sides and still have FF mounted properly.

[@GCJetskiFishing]

Yes you could mount the fish finder on the middle of the bracket. I troll with my rear seat rod holder kit though

[@grantwaghorn4939]

Been loving your content, just a question from one fabrication brother to another about the mounting of the transducer. How did you mount it? Just screws or screw and glue?

[@GCJetskiFishing]

Hey Grant, I drilled holes through the ride plate, got longer bolts and installed it like that with a bit of sealant too

[@grantwaghorn4939]

@@GCJetskiFishing thanks for the reply mate. 🤙

[@kevinle9753]

Hello mate, love your setup! I have a 2020 FX cruiser svho. I was looking to add gunwale traction mats because I slipped off a couple of times while standing and fishing. What material do you use? I look at Hyrdo Tuff mats but they only have for the old Yamaha waverunners.

[@GCJetskiFishing]

Hey mate, the covering on my gunnels is not very grippy, its just a vinyl sticker for a bit of scratch protection

[@kevinsipes5384]

@@GCJetskiFishing I’m looking for some scratch protection for my ski. Is the vinyl covering on your gunnels something you made?

[@GCJetskiFishing]

@@kevinsipes5384 hey mate, you should be able to get any signwriting type shop to do the same to your ski

[@jeremykuchta754]

Hi, what did you use to glue on the transducer?

[@GCJetskiFishing]

The transducer is bolted through the ride plate

[@jamesstrachan2288]

Hi GC Jetfisher, do u sell ur fish finder bracket and fishing rod attachments to Australian people?

[@GCJetskiFishing]

Hi James, yes I do sell worldwide. Feel free to check out my website www.gcjetskifishing.com

[@chrisr4993]

Great video mate! Where did you fit the transducer cable from the outside to go inside the ski to the battery? Cheers

[@k.tanaka1866]

What did you use to protect the side of the foot wells?

[@GCJetskiFishing]

Hi Ken, it is just a simple vinyl wrap, any sign writing type shop should be able to do this for you

[@Johnmarkoffline]

I have same Ski were did you mount your VFH at trying mount one for myself.

[@GCJetskiFishing]

Hey John, if you get the same VHF as me, the GME black box unit you can mount the unit itself literally anywhere inside the ski and the whole unit is controlled by the hand piece which you mount in the glove box. I mounted my unit behind the fairings on the front, in behind the glove box

[@tcdz01]

What do you keep in your life jacket besides a plb?

[@GCJetskiFishing]

A PLB and also a handheld 5w VHF, that's all I keep on my vest

[@camm4188]

What brand of battery jump starter do you run? Cheers

[@GCJetskiFishing]

Hi Cam, it is a "Powerall" brand. Thanks

[@jordax2028]

did i miss the info on your transducer?

[@GCJetskiFishing]

what would you like to know about it mate?

[@jordax2028]

@@GCJetskiFishing oh im looking at getting a lowrance Hook2 for my 2010 FXHO, and was wondering how u mounted your transducer. on the transom? in the hull? through the hull? cheers

[@GCJetskiFishing]

@@jordax2028 its in the video mate, i mounted it underneath the ride plate but the hook2 has a different transducer to mine

[@jordax2028]

@@GCJetskiFishing shoots i must FF that bit lol

[@GCJetskiFishing]

@@jordax2028 haha gotta pay attention mate!

[@fierceflyer5]

Why did you switch from sea doo to Yamaha? I’ve heard the sea doo is more stable, is that not true?

[@GCJetskiFishing]

I went with the Yamaha because id never tried one but I have many friends who own them and yamaha definately have a good reputation for reliability. As for stability, seadoo might be a little bit more stable because ofvthe longer rear deck but the new yamaha is also very stable and wider, I can fish 2 people and swap places very easily

[@fierceflyer5]

GC Jetski Fishing Thanks for the info appreciate the reply. Can’t wait for a new video

[@jerryjohnson773]

Where can I find that in the USA

[@GCJetskiFishing]

What part exactly are you looking for??

[@Jetcast]

Only 63hrs GC? My 2019 FXHO is about to reach 100 already! :) I really wonder how someone can only use a ski 25 hrs a year which is apparently the ski average around the globe. These are good skis. No ski is absolutely perfect for everyone, but it's pretty close, especially for fishing!

[@GCJetskiFishing]

Haha yeah only 63! the first year I got a ski I did over 100 in 6 months :) I know what you mean about people only using low hours on them... I see so many for sale with less than 20 hours it's crazy! You are right about these being good skis, really happy with mine

[@grimwaldreaper9605]

The only thing missing is a couple of magnetic trays to keep misc. metal gear from going swimming. Grim

[@GCJetskiFishing]

I'm not sure I would see the need for magnetic metal trays... Half the stuff that is metal would be stainless steel being in a salt water environment so wouldn't stick to it anyways. But my tools can't jump out of the chilli bin so I don't need to worry :)

[@brandon7990]

It's a nice setup for sure, but not the ultimate. Seadoo fish pro takes tha spot.

[@GCJetskiFishing]

...how? I dont think you will find anything on the fish pro is better than this?

[@debbieamper6888]

The fish pro is nice but it doesn’t have the reliability of a Yamaha engine. Yamaha engines are among the best for marine water sports. Why do you think Yamaha outboard engines are the number 1 selling outboards around the world? Evinrude and mercury don’t even come close.

[@barrysargent1213]

@@debbieamper6888 Yep, if you can afford one there is no question. Simply the best you can chuck at the water!

[@stevenquigley4208]

All I am considering a stabilizer from a company called Dockitjet out of Brisbane. I am looking at their 'Shorties' Stabilizer. Dockitjet.com Can anybody offer any comments on the Company and Product? Thanks

[@GCJetskiFishing]

Have not heard of them... have only heard of jetski collars

[@stevenquigley4208]

Saw those. Looks like they are made of foam. Concerned they might chip out if a Dock or Mooring is rough Thanks though

[@GCJetskiFishing]

@@stevenquigley4208 yes I think they have gone few a couple slight design changes to combat durability issues

[@cmtetaboaco]

Supercharger in a jetski is the most inefficient thing ever!

[@GCJetskiFishing]

Yes the older ones are really bad on fuel efficiency but I have heard the newer Yamaha's are pretty good as long as you go easy on the throttle!

[@cmtetaboaco]

GC Jetski Fishing I have a FX HO, the top speed is 10mph less than the supercharged, BUT for that the supercharged uses a crazy amount of fuel, and its only possible in flat water, in open sea they all travel the same because you just can’t hit WOT, there is a limit because of the waves, and 180hp is way more than enough!!!!! If you are not a “Jetski drag racer” if there is such a thing, there is NO REASON what so ever to buy a supercharged! My opinion, I have PWCs for 20years or so!

[@GCJetskiFishing]

@@cmtetaboaco You have a similar view to me. The supercharger would be good for racing on a tight circuit where you are always on and off the throttle but for the open ocean like I do I prefer the FX HO

[@jeffro7475]

@@cmtetaboaco in my opinion its like having the option to buy a full auto AR 15 or a semi auto, ill stick with the supercharger for the FUN switch . I can always let off the throttle 😃

[@cmtetaboaco]

Jeffro74 my sea is not flat, there is no way to use WOT on any kind! You will not touch the water for more than a second lol