2020 Harley Road Glide - Two Brothers Racing 2-1 Shorty Turnout Exhaust Sound Clip & Dyno Numbers

Stock 2020 Road Glide gets the first of a few 2-1 Exhaust systems installed. First one up is the Two Brothers Racing 2-into-1 Shorty Turnout Exhaust in the Stainless finish. We were impressed with the improved hp / tq numbers even with a stock motor. Check out the sound clips and performance improvements.
TBR 2-1 Shorty Turnout Exhaust: www.getlowered...
San Diego Customs Pro Series Perf. Gripper Seat: www.getlowered...
LA Choppers Stainless 1-1/4" Twin Peaks 13" Handlebar: www.getlowered...
Find Us on Social:
Instagram: / get_lowered
Facebook: / getlowered

[@katrostorm3075]

I like the look of the shorty... pretty badass You can never be sure of the sound until you hear it in real life

[@davidmcnamara9453]

Thank you for posting. My 72 yo father just ordered these for his Road Glide. Glad to see he made a wise decision 😎👍

[@davy_deadsbrothers]

Are you talking about the quality of the sound or the pressure in the exhaust? I did not understand well with the translator 😉 thank you

[@josephcarl4167]

What cam are you putting in

[@raulsilva8528]

Do you have larger wheels or lifted suspension in the rear? Love the way the bike sits

[@Getlowered]

Stock wheels but 13" Ohlins HD 772 Shocks

[@ryant3694]

I have a '20 LRS with the tbr turnout. In your opinion is it a good pipe? Not going to mention names but a few well known performance shops and tuners have told me I need to loose it to make good power and torque. Your thoughts on the pipe?

[@Getlowered]

The overall numbers will be decent but it does not have the best looking power curve and suffers a bit down-low.

[@ryant3694]

@@Getlowered what pipe would you recommend? 114 w/ trask intake, se 447 cam, pv tuner. Looking to leave the 447 in for now. Also, I'm in Philly. Could I bring the bike to you for the tune?

[@Getlowered]

@@ryant3694 Have any preference on 2-1-2 or a 2-1? Also, finish (stainless/black/chrome)? We can tune it at our shop in Warminster, PA. We do recommend Power Vision and use that so you're good there.

[@ryant3694]

@@Getlowered no real preference on finish or configuration. Just nothing too long.

[@Getlowered]

@@ryant3694 Best performance I'd look at Horsepower Inc or D&D full length pipes. Jackpot RTX for a more budget friendly. Then Shorty pipes is Jackpot Riot RTX Shorty and then Trask is decent as well. Khrome Werks 2-1-1 for a full system

[@jacoblong4280]

Did you have to use spacers for install? Because my foot boards don’t want to work with this pipe.

[@Getlowered]

I can't remember for sure on the Two Brothers, but most likely yes. Majority of systems require floorboard spacers.

[@SIRDEVILSCAR]

How is it noise-wise on long trips?

[@Getlowered]

It is loud.

[@joshp5795]

Idk about those numbers. Because my 107 with that pipe and the matching air filter made 91hp/118ftlbs

[@Getlowered]

Pretty doubtful for a 107" with only an air cleaner and exhaust, but all Dyno's do read differently. Come on down and we'll put it up on ours and see what it does.

[@joshp5795]

@@Getlowered i did my dyno at @performanceChoppers. He also had to tune it also so that may be part of the reason why its different. But my 2018 road glide 107 is bone stock with just the exhaust/air filter and the tyne they used which was dynojet

[@fathurrazaq637]

What is your handlebar?

[@Getlowered]

LA Choppers Twin Peaks Stainless. Link in description.

[@Sherddtotheend]

Is this bike have a cam?

[@Getlowered]

No, it was just a Stage I in this video.

[@GibbonKelly]

4526 Cassie Parkways