2020 Huffy Cranbrook Motorized Bike - Nashville TN

[@ShaneSharpVlogs]

These motorized bikes are awesome to ride. This was my first build, so it took me about 5-6 hours to actually build this bike. It's still in the break-in period. One more tank full, and I'll be good to go. Thanks for watching guy's!

[@greecherthecreature]

I built precisely the exact same thing, then rode around Nashville, my hometown!

[@keithshergold9257]

Ha ha that was great! I found a "Cranbrook" frame at the dump, and I'm going to make it into a gas bike!

[@shannon6815]

2 yrs later I build the exact build, blue Huffy Cranbrook with same engine type.👍

[@youngfinance6319]

I built one and I got in trouble with the cops. I'm 15 and I live in NYC

[@gregory280]

Did you buy an after market break if so which one mine isnt fitting

[@lilshisco9744]

did you leave the brakes on that came with it ?

[@exitparadise2244]

In TN too … how are the cops in your area? I see you have a 50cc motor… any trouble w needing lights, signals, etc?

[@ShaneSharpVlogs]

No trouble or issues. Just make sure you follow the rules of the road. Have fun and stay safe. Thanks for watching.

[@lulnoahhhh]

How did the sprocket sit comfortably

[@ShaneSharpVlogs]

After the sprocket is installed you will have to tighten the bolts after every two or three rides until it stays tight (rubber compressed). Not as bad as it seems. Thanks for watching!

[@luckyduck3594]

Is it holding up ok with the stock rear hub/bearings? I've heard that its a major weak point on this bike but then again that's coming from 8yr old forums soooo...

[@ShaneSharpVlogs]

So far so good. No issue at all. I did tighten them a week or so ago, but that's no problem. Thanks for watching!

[@greecherthecreature]

MAN THEY ARE GARBAGE! I have an IDENTICAL bike to this man, same frame and motor. And they seem ok, then all of a sudden, the come loose. The wheel gets a whole ass inch of wobble, and i looked at the coaster brake and it got ground to literal powder. If you buy one, get a good wheel!

[@N9197U]

@@greecherthecreature I'll keep this in mind. Thanks for letting me know. I'm building one of these just this week. I'm looking for a wheel that fits same as stock, got any reccomendations?

[@greecherthecreature]

@@N9197U Mag wheels made specifically for motorized bicycles will do, but dont get mag wheels for a regular bicycle and try to bolt the sprocket to the disc hub. It doesn’t work.

[@N9197U]

Hey, I just bought this bike for my first motorized bicycle build! I commute 3 miles roundtrip to class every day, I got the 7G 4 stroke kit. Have you had any issues at all so far with the bicycle itself, or anything I should look out for?

[@ShaneSharpVlogs]

No issues just basic maintenance. Such as clutch adjustment, chain replacement, spark plugs, and tires to name a few. Just check and make sure everything is tight after each ride. Thanks for watching!

[@N9197U]

@@ShaneSharpVlogs thanks! One question- did you use wide pedals? If so, did you need a separate bottom end conversion kit to mount them? I'm not sure if the new pedals in the kit I just ordered will go right on the bike as is. (My kit is a 4 stroke so I will definitely need wide pedals)

[@omazilla5739]

Hey man I want to build the same build with my bike but the coaster brakes are really bad, what type of caliper brakes do you recommend putting on it?

[@waqarjamil6365]

Are those huffy bike durable

[@ShaneSharpVlogs]

As long as you ride them on the road. I don't think it could take much off roading. Thanks for watching!

[@waqarjamil6365]

@@ShaneSharpVlogs thank you for answering my question another one I have is that when I first use my bike I should put lube oil right but should I do it everytime

[@jasonreyna2308]

I have the same bike and motor but am having trouble lining up the chain and sprocket, how do you keep it from rubbing the tire?

[@thakoalaking5022]

Mount the motor as far left as you can 2 strokes and be moved up down to fit 4 strokes just mount the motor as far left as you can

[@jacobsurrett5928]

Holy crap, look at that chain elqck!

[@larryshaver3568]

29mph and still quiet

[@brandonconcep1710]

I have the same exact bike wit the motor but the sprocket nuts snapped sadly💔

[@ShaneSharpVlogs]

I hate to hear that. The sprocket is under a lot of torque. Thanks for watching!

[@peytonismyname9258]

did you fix them?

[@rem700sniperplaystationnet9]

I built a 100cc version. It's nuts

[@sonymicronin]

Top speed?

[@madnessmolina5387]

Top speed

[@sundial6919]

@@madnessmolina5387 my stock firestorm80 69cc w 36t will easily do 35mph and cruises great at 25mph

[@elliotttilton9858]

Please be careful with the brakes. The stock coaster brake is not strong enough to handle the motor and will come loose no matter what. At least thats what happened to my cranny

[@ShaneSharpVlogs]

I agree Elliott. I've already had to replace the coaster brake bolt once. I'll definitely add cantilever brakes or something similar. Thanks for watching!

[@Davtt52]

Can you install disc brakes on that bicycle

[@Marcel123-l8h]

Not on the back wheel because you have 2 sprokets one from your cranks and on the otherside from the engine

[@jacobsurrett5928]

My broken huffy cruiser frame is aluminum.

[@jacobmur0893]

i make motorized bike videos too

[@apache-yaquibrown4060]

Do you think I can make it to Lewisburg on that bike?

[@ShaneSharpVlogs]

Depends on where you live. They'll go a good distance on a full tank. Thanks for watching!