2020 Mercedes GLC300 maintenance reset

[@CookingandCouponing]

Thank you! I watched so many videos and yours is the only one that worked on my 2021 GLC300. None of the other videos mentioned holding the home button. They all used just the back arrow and ok square.

[@MrJohnDoe09]

@@CookingandCouponing I'm glad it helped you. I know it can be irritating to reset the notification.

[@hasbouk]

It worked! Make sure that when you are on trip, you actually be in the mileage option of the trip.

[@edbaer7309]

Ty. Only video that worked for me (for 2020 GLC 300 4matic). Had to try a few times but it finally worked. Tyvm!!!

[@Ma_Me0784]

Same

[@jestimator]

Doesn't work for me. One click, trip menu, hold backwards and home button, then just goes to trip info after 25 seconds. 0:32 this doesn't allow my video to show you

[@stevengonzales1535]

Amazing Super Easy! Been looking forever for this reset

[@Xander72r]

Thank you, had to watch 5 other videos of people not explaining it the right way had me frustrated for a minute

[@MrJohnDoe09]

You're welcome, I'm glad it helped you.

[@bryanwade9834]

Dude I saw u shaking I was like what... Then when I tried it I did the same thing. Good work on the video. It was extremely helpful.......

[@ddacombe4752]

Thanks, just got a 2021 GLC 300 and my Autel DS808 doesnt recognize the new model so good to know the new combo to access this menu.

[@MrJohnDoe09]

Happy to help.

[@ogz8252]

Can you make a video for air filter replacement? I tried but couldn’t remove airbox cap

[@1gigi]

Worked on mine and it’s not a 4 automatic. Thanks 😊

[@MrJohnDoe09]

@@1gigi you're welcome

[@nicholasriehle6711]

This was so helpful, I watched a million other videos that did not apply to my car lol

[@StartVisit]

most important start with Trip icon and then inside option one (actual trip) should be selected, there are 6 options.

[@MaverickWall238]

THANK YOU SO MUCH

[@H4H_Handyman4Hire]

I replaced my brakes, but the lights for the brakes hasn’t shut off. I can’t turn it off with the e-brake switch. I can drive the car though. Do you know how to remove the light?

[@judinuest9059]

My 2020 GLC300 controls are different. The cruise on/off is to the right of the square pad. Can't get this to work. Any suggestions?

[@MrJohnDoe09]

Try using the method from this video, kzbin.info/www/bejne/iZ67gGCjqZyjbac

[@judinuest9059]

@@MrJohnDoe09 Thanks for the reply, but I don't have a workshop menu/square. However, the 5 second thing combined with a couple of other videos did finally get it reset. Not sure exactly what I did...but it didn't involve standing on 1 leg with my arm over my head and a full moon ;-)

[@MrJohnDoe09]

@@judinuest9059 well that's good I'm glad you were able to get it reset. :-)

[@judinuest9059]

@@MrJohnDoe09 Me, too. Been trying on & off for almost 2 months....

[@MrJohnDoe09]

@@judinuest9059 oh okay I'm sure that was frustrating to see on your dash for that long.

[@furry_disease7008]

You should specify that you need to be holding both buttons when you press the square

[@MrJohnDoe09]

I forgot to mention it in the video, however I did mention that in a comment to prewittj1 over two months ago.

[@nipex69]

THANK YOU

[@RedsGarageOfBlue]

Exactly. Only reason I figured it out is because of this comment.

[@babyboyge]

Thank you and all the comments

[@cliffisaac29]

How do you go to trip there is no scroll button.

[@MrJohnDoe09]

You use the square button I mentioned. It's like using a capacitive button on a phone, you can swipe left, right, up, and down with it.

[@karoollos]

My Mercedes the same but is not working :(

[@muhanadk2910]

How did you go to full service!! You didn’t explain what to push man

[@MrJohnDoe09]

In the video, I said to use the square button and swipe down to get to full service. Then you will press that same square button when you have full service highlighted.

[@LEVUCARCHANNEL]

Cách xoá đèn báo dầu xe glc 300 đời 2020 rất nhanh ,thank you!

[@thachann4884]

Do you push it all together

[@MrJohnDoe09]

You will hold down the back arrow button and the home button down and while holding them down you will press the square button in the middle.

[@timc.437]

It is holding “back” button, the press the touch button(aka the square button)

[@MrJohnDoe09]

Hold the back and home buttons simultaneously then press the square.

[@zaynesworlds]

Thank you worked great

[@wh9771]

How to find oil grade number ? My is 2019 c300~

[@MrJohnDoe09]

It could be in your owner's manual. If it's not, depending on your location if this brand is available, you can use this reference. Mobil 1 ESP 0W-30 and Mobil 1 ESP 5W-30 advanced full synthetic motor oils approved against Mercedes-Benz specs 229.31, 229.51 and 229.52. Mobil 1 FS 0W-40, Mobil 1 FS 5W-40 and Mobil 1 FS 5W-50 advanced full synthetic motor oils approved against Mercedes-Benz specs 229.3 and 229.5.

[@FickeyH]

Well done

[@olumidefire]

THANKS so much 🙏

[@MrJohnDoe09]

You're welcome

[@juang.7255]

You’re the boss!

[@MrJohnDoe09]

Happy to help

[@harveyottotech]

Thanks, good vid.

[@MrJohnDoe09]

You're welcome.

[@texasbornandraised6605]

Thank you very very very much

[@viscom1765]

Is your door opened during this procedure?

[@MrJohnDoe09]

No it's closed. I forgot to say after opening the driver door to make sure the car is completely off, then close the door again.

[@viscom1765]

In my model I have to buy service switch for the pad in order to reset it.

[@viscom1765]

But MB didn’t sell it.Workshop get it from somewhere.

[@prewittj1]

Did you press the square “select” button while still holding down the back and home buttons or had you just released them? Didn’t work on my 2020 GLE.

[@MrJohnDoe09]

I pressed and released the square button while still holding down the back and home buttons. After the menu appeared, I released both buttons which is why the workshop menu appeared, but all you have to do is click on the square button to get to the assyst plus.

[@prewittj1]

MJD09 all that did was prompt me to reset the trip odometer.

[@MrJohnDoe09]

Does your vehicle have the home and back buttons on both sides of the steering wheel?

[@prewittj1]

It does and I am pressing the buttons on the left side.

[@MrJohnDoe09]

Before you pressed any buttons, was the trip menu displayed on the dash?

[@arkan-2832]

Thank you 🙏

[@MrJohnDoe09]

You're welcome

[@nipex69]

Thank you

[@timurkaziyev265]

Thank you!!!

[@af8368]

Great tip, thank you. By any chance, do you know how to reset an adaptive transmission on 2020 GLC300?

[@MrJohnDoe09]

No sorry I don't.

[@michellebouchard4358]

Thank you SO much!

[@thein1997]

Thanks boss

[@StartVisit]

wow why is so much hassle? unbelievable

[@MrJohnDoe09]

It's likely because they want you to only get things taken care at the dealer.

[@StartVisit]

@@MrJohnDoe09 Im voting YES Right to Repair November 7

[@leelaasokan]

@@MrJohnDoe09was gonna say same. If they made it easy, they wouldnt have as many returning customers paying all the inflated fees beyond the car sales.

[@anthonygonzalez2669]

Gracias

[@MrJohnDoe09]

De nada

[@AshleyWallsJolly]

This doesn’t work. Probably user error

[@MrJohnDoe09]

@AshleyWallsJolly If you haven't already, make sure before using this method that the engine is off and open the driver door, then close the door.

[@MrJohnDoe09]

@@AshleyWallsJolly Try making sure the engine is completely off and that the ignition is not in accessory mode. Then open the driver door and close it again, then try this method.

[@marblemaker117]

Nope😢

[@MrJohnDoe09]

Did it not reset for you?

[@footprint_594]

Some GLC300 models work with the instructions in this video kzbin.info/www/bejne/iZ67gGCjqZyjbac .

[@M2100Mars]

Thanks

[@jpkrause]

Thank you!