2021 Tesla Model Y - Secret Tips For A Seamless Install

In this video, I share my techniques I've learned through trial and error when installing paint protection film. I installed STEK Dynoshield PPF on this 2021 Tesla Model Y. I covered the front bumper and on a later date, the four doors.
I share my techniques for installing PPF with no seams on this Tesla Model Y. It's a bit difficult at first but like all things in life, gets easier the more you do it.
Follow me on IG @dagraphics
www.dagraphics.co
Serving Orange County & Inland Empire Areas
Hire me
[e-mail]
Don't forget to subscribe!
Thanks for watching! 😎

[@technologyleadership3132]

Derrick is a real deal. He installed PPF on my Model Y and it looks awesome. If you are in LA/OC area, do check in with him. Highly recommend him.

[@dagraphics4369]

Thank you 🙏

[@kevinche3065]

@@dagraphics4369 how much do you charge for front bumper model y?

[@danielalexandersimo]

Can we get a video on that water deionizer set up. Did it you plumb it in from the outside? What system is that. How often do you replace resin. Looks nice!

[@gettysantos8325]

Great tips bro, I just got certified installing PPF and I still need more practice

[@DavidNovaa]

Bro I remember going to Beaumont Redlands area doing these random installs in people's garages lol

[@jaredkimmons1828]

Great Video! Will you share what brand wax you used? Looked like Adams.

[@chaseD707]

So are you wiping on the wax and leaving it on or wiping it off before you install?

[@BrandonGomez-mi7tj]

Great video! Very informative! How are you a mobile ppf installer?

[@dagraphics4369]

Interesting question, I don’t have a shop and have always done mobile installs. Idk

[@Dc5_henry]

Excellent video! Keep the videos coming! 🔥

[@dagraphics4369]

Thank you

[@stephenmckay7954]

Appreciate the vid!

[@dagraphics4369]

Appreciate the comment!

[@waldo_r3571]

Best process I’ve seen so far! Very detailed and excellent advice. Thank you! One question, how much film would you recommend to wrap the entire car?

[@dagraphics4369]

Thank you! For an entire car I’d recommend a whole roll of 60”. Which is typically 50 feet.

[@genoh8]

Very detailed and helpful video. What kind of clear were you using and what do you recommend for good results, not necessarily top of the line.

[@dagraphics4369]

Thank you! I was using STEK PPF. For good results I recommend a lot of practice and patience.

[@jclark9122]

Great video Derrick! I’m thinking of doing this as a side job. As an installer, is it easier to do bulk installs or precut? I’m guessing precut cost more but takes less time to install. Thanks man.

[@dagraphics4369]

Pre cut kits are usually easier. And yes you’re right on price vs time.

[@slixxster5118]

Have you PPF'd any 4runner? You should do a detailed install on them bumpers. Much harder (IMO) than the tesla. I'm no installer but wanted to see how you'd go about it using bulk to do it. Been searching and I don't think there's any video showing any 4runners bulk wrapping, let along pre cut kits.

[@dagraphics4369]

I did one about a month ago, a bulk install. It’s definitely more intricate. Next time I do one I’ll film it. Thanks for watching!

[@slixxster5118]

@@dagraphics4369 Your contents are great! Keep it up. I know you're in CA.. Do you PPF windshields too?

[@TeslaOG]

I wish you were in NorCal so you could do my Model Y.

[@levibre5795]

How are you so confident that you won't scratch while you cut?

[@cgpd7507]

Quick question, when you are backrolling the PPF on the bumper do have have the liner side out or film side out or does it make a difference?

[@glenb1356]

I see you cut the film, but it is unclear in the video, how far the cut is from the edge (?) I like the fact that you used roll film instead of pre-cut film.

[@Jesse-qt9vl]

What size bulk piece would you measure and cut for a model 3

[@koloasurf2012]

Oh do you do stuff in Orange County? PM me

[@ChineseGuyinthe415]

how much would it typically cost to cover the whole front on PPF and time it would take?

[@cizan316]

What’s the dimensions of the film used here?

[@chrislucket]

What's in the spray bottles?

[@gtimti]

Hi..You don't get dust under the film doing at the customer's garage?

[@dagraphics4369]

Not usually. It happens sometimes but I’m usually able to get it out during the install.

[@patriziotortis7838]

Do you need to cut around sensors or do they still work with film over them?

[@dagraphics4369]

I cut around them. I’ve seen some cars without the cut around though. 🤷🏽‍♂️

[@patriziotortis7838]

@@dagraphics4369 Thanks!!!!

[@dagraphics4369]

Nowadays I don’t cut around the sensors.