2JZ Chaser is Almost Done!

[@ktllama4858]

Anyone else notice how much better Johan is getting at explaining what's going on?? He also seems much more comfortable in front of the camera - love to see it 👏

[@Lowcoupe]

Johan is the best. I wish he'd have even more camera time expaining stuff.

[@mrtangyfb7960]

love when adam makes johan use the camra like you say he getting better an the man is brain box

[@frazydazy3696]

crazy what professional on screen training can do

[@RONIN1111]

Johan is my favorite.

[@EliteSniperTV]

He's getting so good on camera fast

[@darrellh.9680]

So stoked to see even more of Johann enlightening us with his mechanical genius!!!

[@nomad7991]

Agreed!!!

[@Bally1337]

Agreed , but he needs to start wearing some gloves and long sleeves when welding. Those UV rays are not very healthy for your skin.

[@Jessie-lh4si]

I enjoy watching him work, his welds are insane.

[@maccdaddysi4877]

@@nomad7991 “ no ma’am CD E

[@thesigmaenigma9102]

We need more out-of-context clips like the one of Johan just throwing that steering wheel up and down while looking through the window.

[@ruizgt]

And Collette with her Inspector Gadget jacket.

[@NeedANameWithoutNumbers]

I agree! Weird random shit like that is always funny.

[@callefalk4457]

SePå FAAN!'!!!

[@9168TimGlass]

I just love the quality of the videos in the new shop. The lights are amazing, all the new builds, Johan is so on point & makes everything look so awesome, the sound quality is tops & of course Adams enthusiasm & charisma is addicting and it shows with everyone that works around him. I have been excited for each new video to post, keep it up everyone, I thank you all for your efforts and the enjoyment.

[@notorioussneaky678]

Don’t think I’ve seen a chaser built with this much care before.. they usually don’t get enough TLC

[@Matt_Lanzer_13]

I mean the race cars in Japan get a TON of attention, but that’s a different kind of tlc 😂

[@Matty.Hill_87]

There are some beautiful chasers in the UK and Ireland

[@charlespage5037]

Welcome to the lz builds lmao

[@ollie786]

@@Matt_Lanzer_13 Not really, most racecars over there are hacked together with off the shelf stuff

[@Matt_Lanzer_13]

@@ollie786 uhhhh have you seen half the fd Japan builds? Theyre mental with all the custom work and fancy parts... hardly “hacked together”😂

[@joeyg29jgjg]

I love the difference in ability adam has. Like one minute he's wrenching on an engine looking confident then goes to do "home repairs" and is absolutely lost. Fan fucking tastic lol

[@HanKamiBeats]

I cannot get enough of these videos. I've always wanted to "build" my own car but sadly, my financial status does not support a project car. At least, watching you guys building cars helps a little bit with the frustration of not being able to work on my own one. Love your videos. Keep it up!

[@zenkiethan]

you got it homie, i believe in your dreams 😌

[@HanKamiBeats]

@@zenkiethan ❤

[@Thatvqkid]

NGL the polished intercooler piping and Polished engine cover looks amazing together can't wait to see the car done

[@B_MAN_1345]

The amount of blitz 03’s this man has is just insane

[@aldomartinez2338]

Just like tj hunt😂

[@Dice_weiss]

I’d be totally happy to see more technical videos of Johann’s thought processes on fabrication as he definitely is thorough and understands things need access for maintenance. He would be a solid mentor!

[@Void-gn9zm]

Hey Adam! May I suggest using drywall toggle bolts instead of dry wall anchors. They hold much more weight and are much more secure.

[@G_Ozare]

Johan is to Adam what Josh is to TommyFyea. These dudes are LEGENDS in their own right.

[@bigchungus1141]

I was standing behind Adam at a subway n Fl i don’t think he saw me he ripped a fart thinking no one was behind him. Smelled like greatness.

[@Matty.Hill_87]

I really hope this is true 😂😂

[@JohnDoeC78]

Adams got over 20 cars, you think he'd be catching the sub?

[@Matty.Hill_87]

@@JohnDoeC78 he said "at a subway" so my guess is he was getting a sandwich

[@bigchungus1141]

@@JohnDoeC78 you think there’s actual subways in Florida? Lol

[@PenwithAk]

@@JohnDoeC78 r/woosh

[@darrell680]

Great vlog. Loving the longer format. Johan is awesome. Getting better all the time at speaking in front of the camera. Can’t wait to see the full rebuild of the r32 GTR.

[@Godscountry2732]

Congrats guys on keeping the shop clean, organized, and efficient. Being organized is the key to driving them instead of repairing and or replacing the expensive parts you didn't install properly. Half the DIY builds that aren't finished are because builders are unorganized and have no plan, budget, etc. A good idea for high-performance street and track vehicles is to do what NASA does, after the final assembly or as they call it "Closeout", take a photo of the position of the finished part, assembly, fluid level, etc. I recommend using a paint marker on critical fasteners, oil, fuel, coolant lines, filters, Fill and drain bolts, etc. to verify they were torqued, secured, and filled with fluids.. Tearing up your new Strange engineering 9 inch Ford differential / Gearvender overdrive isn't a good day.

[@solanod12]

Johan is so good at what he does! I would love for him to be my mentor, master, boss! Hahaha

[@mattbrown3400]

NEW TUNER ERIC SEEMS LIKE A PRETTY CHILL DUDE

[@commonsenseisdeadandgone]

The heat sink having peaks and valleys makes it have more surface area than just a straight bar at least 200% I imagine. That is straight genius! Little touches like that are what sets companies apart, You knowing that I give you mad props, stay humble, all of you. LZ stay out the weeds!

[@_carlos3860]

This channel is the best ever since his BMX arc. Adam is the GOAT

[@Babbans]

Johan is the GOAT!! So down to earth guy, seems so genuin and kind! All the love to all of the crew, but Johan and Adam is my rolemodels🙏❤️

[@Sir.VicsMasher]

I dig that [Cast Iron] gray color you had that JZ block painted a year or so ago. It also makes leaks easier to spot which can save an event/ engine.

[@chris_still]

Love watching Johan work. Thing of beauty👌

[@blakerussell4744]

Gotta love have a fooking genius on your team. I’d sell everything I have and move in a minutes notice to be able to work with such a knowledgeable team.

[@joshuagarner6981]

If you have access to the attic above that room go up there and put two 2x6s flat against the sheet rock screwed in from the sides with 3 1/2 inch deck screws then you can run your TV mounting lag bolts right into that wood from below.

[@neotemana]

JOHAN IS A SOLDIER!!!!!... Would be good to see him open up his own JDM workshop one day

[@Jet-d3y]

PRO TIP for Adam LZ home improvements. Put your bit through the center of a paper plate and then drill your hole in the roof. Saves the trouble of holding the box and catches the dust waayyyyy better.

[@dariusboykin750]

Definitely one of my favorite builds can’t wait to see them all lined up ! 🔥

[@tylerakerfeldt7220]

The fins on the inter cooler Johan was taking about, the main benefit of it being like that is to maximize surface area with the added benefit of increasing the total airflow

[@z33Santi]

Loving the Chaser build! Missed the classic White Chaser :)

[@nickpotgieter93]

Johan is a legend! what a great guy to have around

[@Dnboswachter]

If you want good drywall plugs you should get the steel anker ones the have a umbrella that gets opend up when you screw the bolts in to it. They are way more reliable than the normal plugs you used

[@craigblatewicz3186]

Anyone else curious why Adam didn't rotate the mounting plate 45 degrees to redrill the holes so that the pipe was centre?

[@sirmonkey1985]

because that makes too much sense and none of us would of thought of that either, lol.

[@craigblatewicz3186]

@@sirmonkey1985 I literally had to go back to the video to see if he mentioned why he couldn't but I guess it just didn't come to mind 😂

[@Daniel-ww3hl]

I’m checking in after a minute of not watching. Dude I’ve been around since the peppers. 🤟🏻 This is what KZbin is all about. Thank you for this experience. It’s keeping me on Track+.

[@Jon2349]

Can't wait to see the finished build back on the road

[@collindeppe999]

Same me too!

[@dariusboykin750]

Nah fr !

[@Phymatic]

Tuner guy is pretty rad, Hope to see a bit more of his progress with your cars.

[@Brother2Jis_27s4]

That dudes a joke, he has very poor judgment on an extremely important part of tuning. Knock detection is the most important thing to monitor when tuning and he has Mike looking to see if he hopefully notices puffs of smoke or not... Especially on pump gas, loves pump gas nonetheless...

[@erik_cruz]

@@Brother2Jis_27s4 Hi, Brother 2J, I'm "That dude". And you're absolutely right. Knock detection is the most important thing to monitor. I usually tune with a stand alone per cylinder knock detection system. However after years of use, it finally died. I informed Adam about it, but he wished to continue with the tune. Here is a link of how I use that system when I tuned Tavarish's twin turbo Lambo. kzbin.info/www/bejne/bJbRoJymppaIbKc Since I didn't have it in this case, I asked Mike visually check the back of the car. Now you may be wondering why I didn't monitor knock through the ECU. Thats a good question. The Link, just like any other stand alone is a universal ECU, does not have knock control is not active or calibrated right out the box. Nothing is set. No center frequency, no activation thresholds, no gains are set, nothing. Now I know the center knock frequency for an 86mm bore is 6.7 KHz and the second harmonic is 13.4 KHz. But I don't know what harmonic to use without using my stand alone knock detection equipment. I would have to intentionally knock the engine. And for obvious reasons I didn't want to do that. Furthermore, the original knock sensors on Nissans from that era were ignored by the OEM ECUs past 4k rpm because the signal to noise ratio of those old style sensors were that bad. So because the OEM sensor is so bad at it's job and given what I had to work with, I would trust Mike's visual observation over the knock sensors that Nissan them selves ignore past 4k rpm any day. Again, you are right. Knock is the most important thing to monitor when tuning an engine. I was just working with what I had. Thank you for the opportunity to explain in more detail :)

[@Brother2Jis_27s4]

@@erik_cruz I think like most things on KZbin and other social media thevideo didn't give the best context. Realistically the timing numbers weren't shared so I don't know how conservative it was or safe it may have been. I believe, also not knowing the context of what conversation that took place, that I would have postponed the dyno session or any real tuning until a better detection system was in place. But that is also not knowing if you had 32 degrees in it or 3 degrees... I think if you get the opportunity in the future you should get a chance to explain the context of what happened. I do apologize for being harsh, I'm not sure if anyone else realized that what was going on could have been seen as reckless given the context of what was portrayed on video...

[@Kink3t]

Tip on drilling in the roof, use a cutoff of a Coca Cola-bottle or something. Tape it to the drill and viola, catches all the excess material

[@CJ-kz8ho]

Johan in front of the camera is just so genuine and wholesome.

[@ACC_RAGE]

Run from that tuner, watching for knock?????? That’s one way to turn pistons into confetti.

[@brianbailey9080]

Man that HP to TQ ratio on the 32 is some Honda stuff lol

[@rcon777]

Listening to Johann explaining stuff is so relaxing

[@Jordan_Rush]

Adam. I hate wall anchors too. If you want a stronger anchor. Check out zip toggles. A little better than your standard anchor…

[@freddiesellick6909]

To see you get the original gtr and the whole collection would be sick

[@LiLWessie]

fr, eagerly waiting for an r33 lol

[@Matt_Lanzer_13]

@@LiLWessie I mean he had a 33 for a while lol so sorta counts

[@Matty.Hill_87]

All painted the period correct midnight purple for that chassis 👌😂

[@LiLWessie]

@@Matt_Lanzer_13 yeah i was here for it, the giveaway one. I just wanna see him build one for himself

[@Matt_Lanzer_13]

@@Matty.Hill_87 except r32’s never came in oem midnight purple...

[@archa8716]

we need more videos of Johan,he is really good at explaining and teaching

[@sagittariussage43]

Kinda of an unseen and semi unspoken thing about weight reduction, wires are heavy AF. Taking out systems like ABS, cruise control, etc. you can lighten a car by a pound or two up to 10+. Doing a vq swap on my s30, my dad and I took out airbag wiring, cruise control, automatic transmission, and stock speaker wiring. Estimated weight saved is around 11.5lbs

[@wurrskie]

idk if it’s just me but i really miss seeing adam send a car out like the 240 or even the chaser and just getting doors. this stuff is definitely interesting, just liked the drifting simple videos with his friends.

[@Chry_Bmb]

Notifications Gang! Edit: can’t wait for the CT squad to be here again! Been loving the vibe the videos lately. Feels like when I was 15/16 watching you for the first time Adam.

[@jettybooy3594]

Adam I love all the hard work you put into your videos and the way johan explains everything it all just works so well keep up the good work

[@kenkyo9045]

Johan forgetting to struggle lifting that transmission on to the transmission jack hahahaha

[@kellysandford1877]

Grab some snap toggles for any of your drywall anchoring in the future. They are great.

[@05stimmy]

Digging the clean polished bay with the 2j. 🔥

[@Joeboost8805]

Adam wouldn't be able to have ANY OF THIS ,If it wasn't for Joh'an! Dudes a magician!!!

[@AkChronicles.]

Johan literally living my dream 😭 wish I was an amazing mechanic like him

[@mushlove6933]

You are capable. If you truly want something, don't limit yourself. Set no limits and negative self talk and you'll get there with time

[@odd-rob]

Johan needs a raise, he’s killing it!

[@Tate6788]

Adam use toggle bolts or zip toggles Home Depot or Lowe’s or any ace or aubachauns will have em

[@VincentPag]

Little tip: when u drill, use a vacuum and hold it next to the drill to suck away the mess😃

[@ViktorJ0van0vski]

My man living his dreams🤗 so happy for this guy. Inspired me for years and will inspire me for the upcoming years as well. Thanks 💞

[@NeedANameWithoutNumbers]

I don't expect to ever expect to see you on fh5 myself, but I will say tandems on there are quite fun. I am also hoping that your new fd car ends up in that game officially at some point! Also the funny bit where Johan was tossing the steering wheel was hilarious

[@jesthefresh7405]

that valve cover is a piece of art I love it

[@JMeyer8290]

Midwest Mike back at it again with the fire tunes in this video! The Midwest Emo vibes are on point.👌

[@Forest__Spirit]

The white&polished is so good together 😩

[@Team6Loves]

You Have A Compound Without A Bike Park... You have the space to do awesome things, do it!🤙🏼🇺🇸

[@Oki-kq1iq]

Adam for allergies ive read that if you eat local honey it will help you get over those allegies.

[@jayzah]

That custom valve cover is sick!

[@xjchase]

This man really needs a supra and an r33 and he will have every 90s - early 2000s monster 🤘🏼

[@idkmypeeps]

Yohan did a great job explaining stuff this episode

[@cookiescreme2562]

Adam speaking french is absolute 👌 like we say in Quebec bravo mon gars / good job buddy (for at least trying )

[@FullaskillzDrift]

Shoulda used drywall anchors 🤷🏼‍♂️ after blowing out the holes? Hard to tell when not there

[@aaronwest906]

Where would you acquire that blue plastic for the guards? Would be great for my workshop when I'm building cars for people.

[@ModernGameChangers]

Okay I know nothing about tuning software, but I do know about data analysis… so if the scaling changed and the software allows you to export the data to a csv file or xls file then you can just manually alter the data scaling then compare the data.

[@Joe-nc2ox]

Wait that's the tuner guy that tuned Tavarishes Lambo!

[@TheMrEngineering]

Can you imagine a Car build with Josh from Tommys channel and Johan ? 🥶

[@JeepnNick]

Johan is awesome, great builder

[@jasonnesto5140]

Man Johan is a wizard at what he does 👌🏽

[@luismorenoo7]

johans work is so clean

[@mattangrave8478]

Is Johan sciatic nerve pinched like mine? I see him standing with his hand behind his back.... He's either nervous, about to pull out a piece, Ricky Bobby "I don't know what to do with my hands" or got his thumb stuck between 2 vertebrae like I do to stop the pain....

[@Skiridr22]

Those beeds are perfect Johan

[@MasterDzastr]

Should try butterfly drywall anchors for the tv mount they’re much stronger

[@adamrackard6129]

I'm not usually a fan of polished/chrome finishes in the engine bay but for whatever reason it hits DIFFERENT in the chaser. Please please PLEASE leave the raw aluminum alone on this one. It looks sick and I legitimately think that any paint or powder coating would take away from the overall aesthetics of the build.

[@R19Robbin]

Can't wait to hear the stututu on that car 🔥🔥

[@swamp847]

Do you have an english wiring diagram for the chaser ... I am currently finishing off a Build and that would make things so much easier than belling out all the wires i have left in the chassis harness. Nice job and look forward to seeing it complete.

[@S-Kidz]

Those tv mount wheel spacers tho for that proper tv fitment 👌🏼

[@BadFC0386]

That GTR sounds PERFECT

[@gilesbird8543]

Adam you made the holes far to big for the plugs to go in they have to be tight so you have to hammer them in.😉

[@manny7895]

They just keep building “dream builds” ❤️

[@talal1746]

I wish my second turbo manual chaser has an engine with my branding on it

[@ollie5065]

The lzmfg valve cover tho 🔥

[@levelrideconcepts]

Lovin' that JZ build. Great content as always.

[@Kxji]

This guy Johan is so chill.

[@89_boostedsupra]

Beautiful car man. Really enjoyed the video! Thank you for sharing with us!

[@familyoverland2082]

I am sure it's being said but I would get into that crawl space and put 2x4's in between the studs and anchor into wood before you walk into that tv on ground someday. I have used 6 100lb anchors and a 42 lb tv pulled it out of the wall. Just food for thought.

[@YouTokkingToHim]

for pollen get air purifier work like a charm for my pollen problem

[@boomerpaschall]

home improvements a whole nother ball game aye haha, att'a boyz. Keep doing you, it motivates & pushes folks. IMO, be safe, salute

[@greggr._.2109]

It’s a good day when Adam posts

[@zacharyprosper88]

Hell yeah brother and I love Johans Spirit

[@grahamrussell3855]

You have to many cars dude so lucky and had working

[@seanwatern732]

You drilled the holes too big for the dotty plugs you should use some butterfly anchors to mount that into the ceiling it should hold a lot better and they should slip right into the holes you already got there

[@tylersecor4668]

I would love to see more compound update videos. I think they are fun.

[@Skiridr22]

Won’t you loose some HP with the wheels on vs the # frm the hob dino

[@bigmikepimp2003]

Quick question how come no one uses fans and a fan shroud on an intercooler. At least I've never seen that setup

[@fernandolaravlogs7950]

You’re an inspiration and what you do is my dream and one day I plan on doing it but keep growing and having fun, stay safe too have a good one!