2JZ-GE Dual Cam & Crank trigger kit PnP

[@ssstars2.0]

Been saying this since your videos came out. This man is a pioneer in 2jz world!! What a legend

[@kaizousha5531]

Yeah lol. Since he said he was gonna bolt twin turbos onto a n/a head

[@Memes69270]

The biggest thing about this is removing the need to weld in the sensors, it was the main thing putting me off going NAT on my GE, amazing to have you back and I hope you’re still around by the time I’ve saved up enough money 😂

[@supravworld8777]

Yes and it also eliminates the whole 1.5JZ where people would only use the head to get the Cam sensors.

[@Victor-t1j5s]

I swapped to a ge vvti head to get the cam sensor

[@delocalisedguardian7890]

I am in the research phase of my Na-T build, so I don't know anything but I think I will be saving a lot of headaches by following this guy!

[@buckychips6906]

Any chance that install video is coming out? I'm very close to to starting my build and you've saved me so much money and time!

[@StarCinemaHD]

You seriously have thought of absolutely everything. You're a blessing to the 2jz world and an engineering wizard. PS. Check your website enquiries!

[@supravworld8777]

Thanks man, I have some exciting new stuff coming soon.

[@dexterclemmons2150]

Yes! I recently purchased a 2JZ GE and I’m glad that I came across this video. Now I won’t be welding a sensor

[@JPena-sn6dr]

I recently purchased this kit and it is top notch quality! I also am building a ge as a winter project so i am taking things slow and making sure its done correctly. If i made any changes to this kit it would be to extend the cop wires about an extra 12 inches to the back of the ecu connector. I may have to cut my firewall to make them work or extend the wires 12 inches or so. Thanks for your time and innovation!!

[@supravworld8777]

Hi Joseph, was your chassis a GS300? I am actually making them longer now as I had feedback from GS300 owners. I may put an option on the site for a longer harness for those that have GS300’s or just want a longer harness. The harness is plenty long enough for a Supra, Soarer but some people may have re-positioned the ECU or faced it in a different position. Thanks for the feedback, I appreciate all the information I can get to make a perfect product for everyone.

[@JPena-sn6dr]

@@supravworld8777 yes gs300 is correct

[@JPena-sn6dr]

@@supravworld8777 i would be interested in a longer harness for both cop and cam and crank pinout. the engine is currently out of the car so im not sure if i can adjust the ecu location to make my harness work

[@yasmanygutierrez5607]

Boss I need the link to where I can it this kit

[@SupraCuco]

Clayton is a genius and a pioneer in the NA-T community

[@jackleverett2345]

This is amazing, im going to turbo my 2jzge soarer purely because of your work. Amazing!

[@KariimSjG]

Thank God! Welcome back

[@supravworld8777]

thanks Karim, its been a while.

[@michaelgriffin1601]

This guy is an absolute legend. Can not wait to get these kits

[@marcocoetzee6880]

My gosh. How happy to see you back again. I thought we've lost you .

[@johndepalma3795]

Welcome back! I'm still keeping an eye out for your log manifold!

[@124freakshow]

instead of drilling a hole on the pump, I bought a ge pump from a 97 ge which comes with a crank sensor mount hole already on it for the same price.

[@stephenmoore1541]

This is absolutely great, I'll still probably go with a GTE oil pump just because it's a good idea to run an oil cooler, and that will take a bit of pressure to do so. We might not have oil squirters, but with an oil cooler, you might need that extra pressure.

[@JoshuaSmith-hy8xo]

Trip to Japan booked for Xmas, but as soon as I'm back I'm saving up for this swap, so glad this is available as an option, I'll be doing this. Thanks for all your hard work.

[@JoshuaBrownlaw]

Love how much effort you take to make sure everything is perfect 😍

[@jaywolf9530]

Hi Clayton, awesome to discover your channel. Im definitely a fan of everything you're putting out there. Putting everything into such simple terms for a peanut like myself to understand :)

[@TheSocialPraxis]

Just binged on a few of your videos. I don't have a 2jz ge but I just purchased a jzx100 Chaser that I'm waiting on for delivery. Just wanted to say, great videos! Hope you keep them coming and hope to find a COP setup for my car eventually. Cheers 🍻 mate.

[@JeiceNismo]

Your a life and money saver. 👍 to you for inventing this kit. Will definitely be ordering both kits soon for my USDM 97 SC300. One quick question... can I run the stock GE ecu with this kit? I do have a GTE ecu but was just wondering if we have this option as well. Thanks again for making this possible for the GE community.

[@teamshutdown8612]

Very nice product I just have one question will the trigger kit interfere with the top coolant pipe

[@itsthatpokemon4468]

awesome development, you are a monarch of this community!

[@toys87mkiii]

just ordered the dual trigger, went with vvti oil pump mostly for piece of mind( TRUST oil cooler, na-t eventually, mk3 supra).

[@spike46]

Hey buddy just asking are you using a vvti oil pump on a ge non vvti engine?

[@toys87mkiii]

@@spike46 yes

[@abayomimudada3721]

Man you're tthat guy. Much respect. Great work.

[@904jaymaal]

This is great. Seems like it's only drawback is you no longer can adjust the timing with the dizzy.

[@supravworld8777]

The adjustment on the distributor is NOT good. The trigger system of all modern engines is fixed to the Crankshaft. There should never ever be any adjustment of hardware for the trigger system

[@shawonhusban1809]

Just put in the order from USA plug and play coils harness gte manifold adapter hopefully it works

[@mikehubbered9799]

Congratulations man thanks so much for putting in all the hard work for us !

[@na2jay771]

Great video! when is your Ge-gte intake adapter going to be restocked as i’m eagerly waiting cheers 🙌🏼

[@chrisisf4745]

Finally man been waiting for this for a while 🎉🎉🎉💯🔥

[@matthewchapman7960]

Could I buy this and instal BEFORE getting something like the cx turbo kit? Or should I wait

[@ByCustomC4]

Will you eventually create a full 2jz ge to gte conversion kit on your website as I feel like there are plenty of people who would purchase including me

[@JPena-sn6dr]

In one of your videos you mentioned the usdm harness was too difficult to make work with nat, so you used jdm harness instead. Would you clarify on the difficulty of the usdm harness to help bring some insight to those of us with usdm gs300 wanting to go nat. Thank you!

[@mario2jz]

so youre telling me we can turbo and fully tune our stock unopened motors with your products?

[@chazdunaway8240]

excited for the install video

[@marcohuertas692]

Thanks for the trigger kit! Love it!

[@MidwestMechanic]

Ok I’m a little confused on the website but do you have an option for the GE vvti COP kit yet ? All of them from what I see say non vvti

[@user-zd5tr1cc5b]

As someone still learning, would you expect this to hold up to 700+hp or would there be some drawback to using your system when going high hp?

[@sgtfluffy7466]

Where is the install video of this? You said it was coming out soon, but this video was posted a year ago with no installation video posted yet. Did I miss something?

[@Slickstick69]

Your back 🎉🎉

[@winnyb7345]

The man the myth the legend !!!

[@JPena-sn6dr]

Customers need install support, video please!

[@raphaelmendonca7544]

What if you have the gte oil pump already installed. Do you need to use the sensor that comes in the kit?

[@inhthanhnguyen4311]

In dual cam sensors, which side is for the front sensor and which one is for the rear sensor, thanks

[@craigbusuttil]

Absolute champion !!!!!!

[@brandonshick4484]

Awesome man can’t wait to start my build

[@grimsgrave6327]

Does the crank sensor bracket block the tensioner? And does this work only on gte ecu? Can it work on a stock ecu?

[@MIKEDRIFT]

Good work cuzin !!!!

[@BRED23]

Does this kit work on a 2001 is300 with the 2jz ge vvti? (Twin cam 24 valve vvt-I)

[@brandonallgrim511]

You are a legend

[@juniorkapkeo1375]

Can I order this and essentially use gte cams then? Have a killer deal local to me for some 264 gte cams

[@whatthe363]

This is worth the money. But Im poor. Will it ever be cheaper in the future?

[@Keviv27]

Is there a install video for the kit?

[@slurr4588]

Ur a genius take my money please lol seriousness though this is amazing i know what im getting myself for Christmas

[@kaiyayga.5242]

Truly the goat

[@getthecats]

I think you would sell more of these if you called it a "Distributor Delete Kit". Your only competition is Goleby's and they're $300 more expensive with a worse design

[@trooperz137]

can u have these installed without having a turbo?

[@benjamin-qn7nf]

Dude youre a legend

[@CarlosCastro-mo6xg]

Show us your car bro and then we can trust you

[@robertbrown1933]

Will this set up work on my 2000 gs 300? I'm doing an engine swap with a non vvti and a non turbo 1996 supra. Im looking at maybe using a ge vvti head as well.

[@connorhart770]

Soon...

[@stevenedwards4269]

This isnt on your website is this still available

[@PH74KG]

please tell me i can still run this on a VVTI engine

[@skittlelick3rxx962]

Hey man I need your input on something, I need your help!!

[@spike46]

Will this kit work on a 1jz ge non vvti?

[@TheCasperdeigh]

so what do i do for a 2jzge vvti na ?

[@lfinesseauto_boatdetails890]

I have hks cam gear if it still work with your sensors?

[@alanlopez4611]

Do you have kits for vvti?

[@PHONiX_Au]

Finally!

[@lincolnrichards4318]

Need more videos

[@turbogears900]

What happen to the sc

[@supravworld8777]

Its still going strong, it will be in more videos soon

[@samueltrejo720]

Does this work with vvti and if not how come?

[@FeelingLikeElvis]

I’ve been watching you for a while and really think it’s cool what you are doing for the ge but I wanna see you finish the build and show us your car running I’d love to buy everything on the site right now but i think we need to see from you it actually working on a ge and not just take your word ever since you started making these kits “that are amazing I’m ngl” you really haven’t showed us it running and working on a ge thats what I need to cash out and buy the whole store I trust your word on everything cause you are obviously really knowledgeable on the 2jz but I need proof of it running, working and putting some power down I think that’s all we need is actually footage of the set up and the car working as you say I’m not trying to put you ideas down and say they are false by any means I’m not here to do that or even start a debate I just wanna see these products in action is all I’m say pls if you could do that take my money I’d really want to buy these kits but I’m not fully sold yet

[@JPena-sn6dr]

Im having trouble with this kit, it is not plug and play, we require some support from Clayton!

[@bluelagoontipplerloft6130]

Nice new friend here

[@mrsquirrel8079]

I would like to buy a lot of pieces from you but not everything

[@esnebta]

How can I take an engine video seriously when the dude presenting it is wearing a blouse?!

[@supravworld8777]

Haha, fair call man, But it went perfectly with my pink shorts.

[@MIKEDRIFT]

Hahahahaha 😆

[@randomthing4639]

You should contact drift hq.... N sell this thing usa..

[@efrainheredia13]

how can i use this kit with an aftermarket ecu? do I need the connectors that go to the stock ecu?

[@darrinjames2876]

Will this kit work on a 1jz ge non vvti?