2x2 DOOR, WILL IT WORK ? | CHICKEN COOP PART - 8 | Building Our Homestead

[@lavernabouzspain]

Thank you, Joe. I have built the human entry door for the coop and just needed a very simple frame with limited wood. Tight budget. Your video puts me back on track. Thanks again.

[@lynsiobarr5732]

Thanks so much this is exactly what I needed to help me build a door to my chicken coop!! Thanks so much

[@ladyfritz8r]

Thank you. This is EXACTLY what I needed to know to build doors for my run, built from 2x3 and 2x2 for 5 chickens. I built 2.5 of these doors for my coop, tailored to size. The .5 is because I made one of the doors a dutch door so I can open only the top or bottom, depending on whether I want to just reach in for something or open the bottom to allow them into a bigger run area. The chickens LOVVE it, minus the wandering stray neighborhood cat.

[@kyreem909]

For me, the ideas in kzbin.infoUgkxAfqpMLyFn37qcqUl0FAzqkkycQeXqrhP Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.

[@darrendavid]

Am I crazy or did you flip the hinge mount locations from inside the door frame to outside at 9:24 in the video?

[@Saint_John_The_Forerunner]

Quick tip. If you don’t have angle clamps you can use a ratchet strap to tighten the corners together

[@markmooney5662]

I have to build a gate for my chicken run this week....yours is the simplest I've seen and it looks pretty good so I'm going to copy yours . Thank you for sharing and God bless you and yours. Sub'd btw. Gilly wife of Mark in Norfolk UK

[@joemadden]

What tool vest do you have? I like how open it is. Too hot down here to wear a full vest.

[@alexandrelechat2005]

once assembled, can this shed be moved?

[@criaderoelcompa9922]

Nice!!

[@johnwehnes6695]

Do you move buildings in the future?

[@thomswapp]

what is the screw size ?

[@gamiensrule]

Staple gun makes hardware cloth a breeze.

[@Donnybrook10]

Those automated doors kill alot of chickens.

[@michaelpaulmcdaniel8870]

I like your content! BUT at 5:54 -- have you lost your MIND! Your Daughter's face, unprotected and right next to the drive of your tool.. BAD Move DAD!!

[@michaelpaulmcdaniel8870]

12k people miss how you put your Daughter in Danger? Safety FIRST! You are teaching the next generation - if you don't cause her to go blind - then she will repeat your behavior. You should post video where you teach her how to be safe around the tools Sir.