3 LS engine build traps and pitfalls to avoid at all costs!

If you'd like to support the channel because I've helped you or entertained you, you can do so on www.buymeacoffee.com/ThDrivew...
Or not, either way is cool!
We have a PO Box if you'd like to send something,
The Driveway Engineer,
PO Box 17
Orleans Mi, 48865
LS Swap build tips and tricks on a budget C10

[@geoffgravitt7476]

For us LS beginners who are financially strapped, this is the most informed informational LS Channel around. Learn something new every time. Some day I'll get it done. 👍

[@cedricjones5696]

Stay away from KZbin, its the blind leading the blind

[@TheDrivewayEngineer]

And yet here you are 🤣

[@cedricjones5696]

@@TheDrivewayEngineer It's comedy time for me, I always need a good laugh.

[@RipRider916]

@@TheDrivewayEngineer I have a ls. I want to build it to make reliable. But everyone is telling me to go flat tappet cam. They are the best and the factory uses them because they are the most reliable. And unless I’m running 8000 rpm all the time I don’t need a cam that uses solid roller lifters. And I’d most likely blow my bearings out on my rollers by going to slow. Is he right?

[@carguy3028]

Another thing to keep in mind is you will spend money on things you don’t think of to get the swap to work, little things like bolts even add up, supporting hardware to integrate the engine. If you are cash strapped the best advice would be to get everything complete in one go, then drop in and run stock. A stock 5.3 with dual exhaust will run better than a mild 350. They practically last forever especially in a rarely driven car so you can mod it later if you want. I spent more money because I got a good deal on a 6.0 engine that wasn’t entirely complete, it was complete pan to intake but missing wiring harnesses and a few accessories.

[@randalblack518]

I very much enjoy unfiltered JR rants of this sort....

[@380.motorsports]

To be fair, in every Richard Holdener video I’ve seen he’s very clear with the engine performance graphs that show what RPM range produces the best power for a given combination. If internet idiots don’t pay attention and go buy expensive parts that work best above 5000rpm and all they do is drive around on the street then I have no sympathy for their stupid mistakes. I appreciate you are honest about the headers and buying for looks where many folks would not.

[@stlchucko]

Pretty sure Holdener has videos that have demonstrated that headers make more power.

[@texasstreettunes1310]

@@stlchucko they do, even more with a cam swap honestly there pretty cheap too unless you try to buy them from some fancy name brand that claims they make 2 more hp then there competitors. But my biggest regret was trying to do all motor so much cheaper and better just to go turbo if your lookin for cheap power

[@stlchucko]

@@texasstreettunes1310 I think manifolds vs headers on turbo stuff is a non-issue at reasonable power levels. For that, I see packaging and durability being more important. I noticed that the headers have the biggest effect on rec port LS heads since the exhaust side needs all the help it can get being that they only flow about 2/3 of what the intake ports do. Holdener tested a bunch of truck cams on a 6L with rec heads with manifolds and with headers, and the headers made more power everywhere. I suspect it's why there's "rec port" cams with big exhaust numbers. It helps when using the manifolds, but often don't make much difference with headers since they scavenge so much better.

[@texasstreettunes1310]

@@stlchucko yeah for sure dont use headers with a turbo setup, i used 1 3/4 up and forward headers with a 3inch cross over worst mistake i ended up making a whole new kit with manifolds and 2.25 cross over and the spool time was insane im pretty sure when i did my research even a 2inch cross over is good for 1500hp+.

[@migmadmarine]

i like holdener's stuff. it makes sense. is it all applicable? no

[@corvettefever360]

Both my brother and I have been building high performance engines & doing high end fabrications for over 20 years, & this video is so spot on in so many ways! We say most of this stuff so so so many times too!

[@davebarron5939]

Hey JR. I must agree, I am finally in the middle of my swap. The directions you can go are endless, so I am sticking to the realization that "I" dont know as much as a GM Engineer. Sticking with virtually all OE parts as my 6.0 came. The education I have received over the last few years, from you and others is now paying dividends. Thanks.

[@robsmith3628]

Great point about knowing more then a GM engineer that designed the engine in the first place.

[@rallen7660]

Nice to see that you reinforced the message I've seen other YTubers give: engines are commodity goods. The only reason to tear it down is if it's a high performance/race engine, or it has a lot of sentimental value (i.e. the first car I ever drove, after I restored it with my Dad, or my kids were conceived in that back seat.) When you can pick up a running engine WITH WARRANTY for 2 or 3 thousand dollars, why risk tearing into something that runs and maybe breaking it, and definitely slowing down your project?

[@davebarron5939]

@@rallen7660 Well, I must admit, I am going a little farther with a cam swap, new lifters, chrome-moly push-rods, and trunion kits for the rockers. In addition a full billet roller timing chain.

[@abdatruthteller5895]

Yo JR this is why I say watching your videos because even for the beginning diy engine swap dudes that's interested in LS swaps, you break everything down in the simplest way and just keep it real. Thanks and keep it coming bro!

[@lucass3566]

Great video man. I'm researching ls swaps and you hit the nail on the head in terms of losing sight of what's good enough. It's too easy online to see other people doing the best thing to their car and reaching for 1000hp, when really you would be happy with a stock ls making 300. Thanks for the reality check.

[@TheDrivewayEngineer]

That's all I'm trying to do for folks lol, glad it helped

[@RedEyedPatriot]

The 5.3 4l80e swap on my 82 Gmc I used a 5.3 from a 04 Avalanche and a 4l80e out of an 04 Silverado. All stock everything except for aftermarket harness. Cleaned up the engine and put new head,intake and exhaust manifold gaskets. New oil pump and new exhaust manifold bolts. Had to get another drive shaft cause mine was dented.. I just wanna cruise to shows and do decent burnouts.

[@teamtownridge]

JR, thank you for all the great content! Found you last year when looking for information on doing my swap. You have inspired me to get my hands dirty and go for the junk yard "it ran to the scene of the crash" route instead of just spending money. Keep up the great work!

[@martysheets6882]

Carl JR is a guy that I could easily call my friend, he is honest, and keeps it real.

[@deanm4138]

Another great video with lots of useful information, for someone like me who’s just become interested in Ls swapping my vehicle, thanks again for the “ to the point tips and information “

[@richmondHeights1]

I have learned so much more from The Driveway Engineer, than I could have ever paid for.

[@brianhaw9398]

You have a really bad attitude young man! I love it! Keep it up. If your junk runs,keep it running!

[@rendelltraywick5031]

Extremely bad attitude, but I come from a generation where a foot in your ass made you move

[@danielnowicki917]

Truth!

[@RB26PWR2]

You’re right about Richard Holder he is a great guy and an awesome source of information. I reached out to a lot of people in the LS community, so when I continually go to for information is a guy who won drag week with a Stock bottom end LS.

[@spaghetts]

Last year I helped a friend that had made several bad choices because he wanted a LS swap. What should have been a cheap swap ended up costing almost $5000 from bad decisions. He traded a built 383 with a th400 trans +$1000 for a 200k mile 1998 LS1/4l60e, the LS1 ended up being seized and had to be rebuilt. He hit a point where he was going to give up and sell it all but I stepped in to at least get it running. Another expensive waste of money was the sheet metal intake he had bought, looks cool but does nothing and costs alot.

[@TheDrivewayEngineer]

That sucks, I hate to see that, he's lucky to have you

[@trentdawg2832]

I made the sheet metal intake mistake before researching it when I first got into the LS swap world 6 yrs ago, I still have that intake brand new never been used still sitting in the garage, granted I robbed it for the 92mm throttle body.......

[@sebbonxxsebbon6824]

He could of used a 4L80 and put a turbo on the 383 for less....

[@spaghetts]

@@sebbonxxsebbon6824 exactly! He made alot of bad decisions because he didn't do enough research.

[@mariqueflores3342]

⁠​⁠@@sebbonxxsebbon6824 man seriously, a 383 stroker on a turbo with the 4l80 would be a great street car setup. Should’ve just sold the TH400 and build a turbo kit and the trans to handle his desired power range

[@juliovaldez5468]

You brought in some great arguments. I went down the 8.1L rabbit hole thinking it was going to make me feel warm and fuzzy as a diesel and it just didn't work out. The 8.1L is great at so many things but it's just not a relaxed diesel towing my RV by any means. There simply needs to be more people like you speaking their minds to help balance things out.

[@itsyaboyr.b.5895]

You helped me throughout my swap and finally got to move my project on its own power like a month ago. My engine/transmission came ot off a 2002 Tahoe with 190000 milesand I put it in stock and thats how im keep it besides shorty headers and cold air intake.

[@TheDrivewayEngineer]

That's awesome! Congratulations!

[@justinshields4216]

Everyone wants 800-1k rwhp.. but yea get it going with a hot cam & small bolts ons at 500hp to the flywheel.. enjoy it & get a feel for it. Then in the meanwhile stack your parts for the 2.0 version. Way practical & in the meantime you get to enjoy your hardworking! Very valid points my friend. Great content!

[@toryneald234]

Thats what i like about this channell....no Bs....just strait to the point. Thanks JR.

[@transamfreak78]

I spent $90 on a strap-on torque angle tool for doing Subaru head bolts. Used it twice, now I just use a sharpie and eyeball it. Over 20 done now with no issues, let's go brandon!

[@daequanshambley1621]

You guy's sound dumb asf for that stupid saying. Real conservatives don't say this stupid stupid. Let's grow up and actually get our country back. Enough of this dumb shit.

[@scottprofitt1065]

Love how honest he is

[@drstallings_314]

Amazing information, I’m new to LS world and appreciate all the help.

[@matthewryan7374]

💪💪💪Great vid I'm stepping into my first LS swap and this was what I needed to hear, thanks for the gems

[@robgregorski2182]

Nice vid. I bought a running kinda driving 99 5.3 silverado 1500 4x4 for 600 bucks. Bad trans, no drive or over drive, I drove it on the trailer. Pulled it out the other day putting a gasket kit on it and then it's going into a 79 GMC. What he says is real. It's easy to get lost in buying the "best" parts for your swap. The most I am doing to my 5.3 is new gaskets, no need to open it up any further.

[@rustypotatos]

Bro it’s been a little and I saw this video posted a year ago. Shesh time flies when you are having fun. So much has changed and still so much teaching. Thank you jr

[@chrisdawson9130]

Brutally honest......I love it

[@zachs1985]

No BS, Not convoluted and straight to the point. Got my Sub. Keep it real 🤜🤛

[@TearItUpFixItTV]

All I have to say is, The LS Swap Community NEEDS MORE OF YOU…. Thanks 🙏🏾 buddy 😎

[@mikestuart7123]

So I leaned to stick with the basic engine and get something running for cheap than a huge expensive paper weight. Thank you!

[@jasonbrown4443]

Never understood the disassembled engines that ran!! Imo you have the best no nonsense channel!!

[@nitomeanboyGBODY]

Someone finally said it!!! Thank you. Video and point well made. 👌🏽

[@DVCasey0311]

"the entire military runs on powerpoint" ooooofffffff, this fucking hit hard. I do not wish to remember those days lol

[@Mr1technician]

Lol. You are right about everything. I have guys asking me a lot about helping or doing a swap for them. They usually don't know but want to be a part of the thing that all their buddies are talking about. They don't want understand that they need to come up with a plan with the help of a seasoned swapper and go with it.

[@paulgrumsha8990]

Thanks for every bit of info

[@Foundmylsswap]

Spot on!! Awesome video!! This kind of content is why I subbed originally. We’ll done sir. Lastly. What happens is once they get to a certain point, a fella can’t turn back because he’s too far invested, often just to spare his pride. Ask me how I know 🙄. I’ve learned my lesson. Complete or nothing.

[@GreaseBallGarage]

Use what you have and upgrade later Best advice someone said

[@jims261]

Keeping it real JR keep it coming great video

[@haroldpowell]

Jr u are right about everything u said only reason i got shorty headers for my lq9 was i was tired of stock manifolds leaking i know shortys wont make more power but they look nice and no more leaks so win win i love ur videos cause ur a real person if my motor was messed up ur gonna tell me wrong or just send it just to prove a point to people so my lq4 blew up i got a lq9 someone told me ill gain nothing from putting the lq9 tune in my pcm that used to run my lq4 motor

[@JoseContreras-mv5yz]

🤣i knew this video would sound like this🤣i love it. Basically keep it simple,buy a complete engine,install it,send it.

[@coyotelarry]

Just stumbled across your channel and love your keep it simple stupid commentary. Definitely subscribing and looking forward to new LS videos.

[@justinvanburen8259]

I love your TRUTH!!!! Please keep it up!!

[@martysheets6882]

JR I always appreciate you, and your knowledge I am not made of money, so you have struck a cord with me Brother, I did have to invest in a Holley oil pan to get my 5.3 in my 64 Chevelle, I ran into some clearance issues with tie rods but other than that, it's been a big learning experience. Thanks for all your help. Look forward to the next video.

[@trentdawg2832]

I had to buy that damn $350 holley 302-2 pan too for my nova swap.....that's why the next 2 swaps I did were c10's......no fancy oil pans or low profile intakes.....cheapest vehicles to LS swap if you ask me

[@martysheets6882]

@@trentdawg2832 Trent Buddy I could write a horror script on my swap, now you can buy those ebay 302-2 for under 200.00 same pan without the name, exhaust headers, exhaust manifolds, it's about done Brother but honestly I hope I'm not to sick of it and sell it. I know you know how I feel Brother.

[@trentdawg2832]

@@martysheets6882 I know exactly what you mean....I've owned my nova for 23 years now I'm on my 6th motor, 2nd LS in it , honestly I couldn't even consider selling her, she is kinda like my first born.....I have a badass lifted lmm duramax, 2014 tahoe, cts-v (v-2), a mercedes cls550 , and a '73 c10 short bed fleet side. .......and I would sell any of those nice cars before I sold my beloved nova........trust me , once you get your chevelle dialed in you will love her again and remember why you got her in the first place.....nothing beats that feeling of nostalgia with the practibility and reliability of an LS under the hood, trust me it will be worth it when it's done......I've completed 4 swaps including my nova just cause you cannot beat them......they are fun to drive and people admire them. Like I said though if you find yourself doing it again go with a truck, you can literally have it swapped in one weekend without any special high $$$$$$ parts

[@martysheets6882]

@@trentdawg2832 Thanks for the pep talk Trent, you're a good dude Brother. Take care I'll be looking out for you.

[@trentdawg2832]

@@martysheets6882 white on...I mean RIGHT on!!!

[@GeorgiaHyway]

Great video and quality information. Doing a LS swap into a 2005 Lincoln Navigator. Still on the look out for an affordable 6.0L / 4L80 combo.....Prices have gone stupid crazy! Waiting on the holidays when people will need money and be willing to dump a complete wrecked vehicle for an affordable price.

[@PetesGarageandperformance]

I’m with you on the trunion upgrades. I’ve never seen the stock needle bearings fail. There was a bulletin from GM about it about 20 years ago, but I’ve never personally seen one fail. My swap runs stock rockers and they’re fine. But my cam is only .588 lift.

[@TheDrivewayEngineer]

I see more people screwing up reunion installs by far lol

[@marshall5143]

good honest video mate, thanks

[@austin_94gt18]

I found myself in 3 categories he mentioned in the pitfalls. And I was sure I wasn't doing anything wrong in my approach to this. Glad I learned something. Sad I bought an engine like the one without an intake he displayed. Makes me feel like I bought a hunk of junk now

[@John-ze4qy]

Your honesty,is dead on!!

[@bhwjrproductions]

I got my 5.3 from a wrecked Tahoe z71 in some guys front yard. I pulled the engine, trans, harness, gas pedal, O2 sensors, intake basically every took off to remove the engine I took home all for $1,000. I did the headers and fancy digital gauges but the rest was mostly junkyard parts and stuff I modified to make it fit. It runs great so far. If it breaks I’ll go and get another junkyard engine to replace it. This is my first LS swap and I look forward to doing it again hopefully soon.

[@jonathonhicks2369]

Hey Bruce where are you from

[@ScottsChaos]

Sunday I went and picked up a 1999 firebird with the V6. The engine runs but has a knock. I figured I would just LS swap it. I do not want to go Down a rabbit hole. What I need to know is 1) can I use the transmission that came with the car? 2) do you reuse any of the parts that are on the V6? 3) does the suspension need to be done right away? 4) do I need a new K member? I'm sure there are 100 more questions but those are the most important to me.

[@hydrocarbon8272]

I half-disagree about headers - they do make power, but 5-10hp for that price is absurdly bad $/hp. Same for the TBSS intake, unless you can pull one complete from the boneyard for $30 like I have. The cast OEM headers that fit and truck intake if it fits will let you spend money on things that REALLY make a difference.

[@erikrummel6277]

This cracked me up!!!!! It was like hearing myself rant about people buying dumb stuff they don’t need for a build that never happens and then spend all their time bench racing like they know something 😂😂

[@CountryMileGarage]

New subscriber ... you hit the nail on the head brother. Another big one is I have a good running engine and I need to take the heads off to make sure 🤣🤣🤣 do a compression test and leave it alone lol

[@A21Productions]

#2 was the biggest pitfall I have ever made in my life. That slows the whole process. Thanks for the slap in the face J.R. You told me from the beginning. I didn’t listen because I don’t kno you and money grows on trees😖! But you were definitely right. Yeaa Mane

[@fast.as.xracing8733]

Thanks for the information needed

[@gradygill706]

Thanks for the good information.

[@ajose223w3]

Thanks for this I just started the thought process of swapping one in a old car I have and been going down a rabbit hole on what I should get or should I buy new heads ect. Now I know just buy a complete one and throw it in

[@nsboost]

Swapped a motor in a 07 Silverado for someone. I got the motor out of it in payment. Crank was fucked up. Valves bent. Cam chewed up. Lifters toast Bought a 58x crank for $75… used the rods in the engine. Put summit forged pistons in it. Put a set of milled 862s on it. Custom btr cam. 11/32 push tubes. Btr high rpm springs. Ctsv lifters. Car runs 8.90s in the 1/4 like a bracket car and only have 2k into the engine.

[@kenjohnson765]

Just bought a 2002 Silverado with a LM7 4L60e for $500.00. They towed it to my house said the crank sensor needed replace. So I checked things out Charged the battery and vroom she started right up. Now looking for something to swap it into!

[@nooch8it197]

Spot on, I have a shop with a dyno and deal with this daily.

[@gerald4027]

I made some homemade headers.from the heads are 4 inch and the collector are 10 inch.They will work good at 37,000 rpm.

[@jordanturner9173]

Dang I'm glad I found your channel before I got too deep into my build. I'll go through your videos before I bombard you with dumdass questions, but Im doing a quick, cheapish build to swap into an 04 V6 silverado

[@markinsacramentoshow]

Thank you for your videos

[@jamesrich3739]

Thank you for the great information. Im have a 64 c10 & I want to keep it a manual. I am got at T5 out of a chevy s10. What do you think about that combo? Thanks.

[@TheDrivewayEngineer]

It works fine if it's what you have, I prefer the AR5, but it's a fair bit more money.

[@stivic923]

When I did my build I went to junk yard. I wanted a 6.0. Couldn't find any in my yard. Just 4.8 and 5.3 there. The 4.8 was the easiest pick. So you know what my truck has? A 4.8. Why? Cause that's what got my truck up and running.

[@TheDrivewayEngineer]

And you're out there having fun while the next guys truck is slowly rusting in the backyard because he can't find a 6.0 lol

[@trentdawg2832]

4.8's ripp, and sip gas.....I love my 4.8, it's spanked brand new ford raptors at the pismo dunes.....just walked right past them at 7k rpm......look up cj7 jeep beats raptor racing in sand .....on you tube, there was like 5 of those piece's of shit trying to beat my lil 4.8

[@CountyGarage207]

This is the video everyone should watch before doing an Ls swap. I've gone down the road of spending a lot of money to do one, and learned that I didn't have to.. I could have got away much cheaper, and had just as much fun. I'm about to swap another 3rd gen Nova of mine.. the complete running 5.3 with wiring, pcm, tac module, and pedal I got in trade for a big block bellhousing (roughly $300 because it was a lakewood bellhousing).. I went with ICT billet swap mounts ($40), an Amazon 302-2 oil pan ($200, and came with everything including the dipstick), Ls3 manifolds ($200, most people can get away with the stock truck manifolds).. I'll barely have any money into my swap this time.. and the 300hp the 5.3 puts out is a lot more than the probably 150 the car had originally. I also have about $250 into a clutch, pressure plate, and clutch ball pivot adapter because I'm running a muncie 4 speed.

[@michaelhite1433]

My local u-pull it sells all V8’s for $350. I’m not ready to do the LS swap on my Land Rover, I just did work on it’s 4.6 (Buick 215), but I know I will need to replace the Rover V8. LS’s are way more reliable and cheaper. With that said, I do need to buy a special adapter to mount a GM trans to my Rovers 230 transfer case. I just found a used one for $400 because the dude is doing a diesel swap on an LS swapped Rover. I know all about rabbit holes, my other project is a H6 swapped Subaru. I see so many KZbin channels swapping the intakes on LS’s. I’m just swapping in a complete truck motor, L33 because it’s aluminum block like the Rover V8. Similar weight. Thanks for the information.

[@donfregin8668]

Your the bomb dude love your videos

[@richmondHeights1]

Thank you for the knowledge.

[@zhpike0478]

OMG I LOVE this video!!!

[@thundermountainatv]

the best advice I have heard yet, buy it complete or pass it over

[@rustypotatos]

This video is amazing

[@Shawn_lsx]

Good video I had my project on hold for 2 years obsessing over the perfect motor wanting a lower mileage 6.0/6.2. Big waste of time I just want a fun street car. Found a 5.3 with half the mileage, quarter the price and actually complete! Used the extra money for cam and car intake to fit under hood. I can burn the tires easily and i'm actually enjoying the car now.

[@TheDrivewayEngineer]

That's the spirit!

[@apsonyo2407]

Just stumbled on to this video love it thanx I will be subscribing

[@TheDrivewayEngineer]

Awesome! Thank you!

[@timhorn902]

My brother and I started a budget build 5.3 swap in 03 BMW 325xi for just fun.

[@badgoat6660]

Great video

[@TheDrivewayEngineer]

Glad you enjoyed it

[@taylorsgarage5790]

As soon as you said, “you’ve never had a turbo, b**ch.” I subscribed and hit the bell.

[@johnathonw77]

“You never had anything turbocharged biittch” I’m crying 😅😂🤣. I needed this this morning.

[@rickymartin3678]

New 2 UR group on FB & U say it how it is & It's great !!! Thanks 4 being U

[@civik29]

Informed is the key word here!

[@roadmasterk6019]

Very impressive, this upload...

[@charlessievers4690]

Great information appreciate it

[@jmiller3659]

Wow perfect video Thank you 🙏 much needed advice. I was wondering if I could use your help? 1st time for me building a LS I have one out of a 2003 GMC I’m trying to build for my 1929 Chevy Sedan. I would like to reach high 400 hp. Like you said look all over the web everyone will tell you different. Just wondering if you could point me in the right direction to hit those numbers. Thanks

[@TheDrivewayEngineer]

I have a couple videos that will guide you on basic combinations if you look through the LS Basics playlist

[@dewholdingsllc1050]

Funny. Thanks all good points and good content keep it up.

[@badassbees3680]

Love your honesty!!!

[@TheDrivewayEngineer]

I appreciate that!

[@tomtalamantez8934]

Got a 99 Tahoe, 2door, 2wd. Has the 4l60 in it, however I have heard the newer ones were better. I just want a swap with a “bolt in cam” for some “chop”. Thoughts?

[@TheDrivewayEngineer]

They're not better in any way that matters

[@mindyshadows]

People really need to do the research before buying things is a big one

[@TheDrivewayEngineer]

Watching a guy who went all in on a sheet metal intake and 102mm SBC TB for his stock Suburban that's DBE has been amusing me all week long lol.

[@qunicetoole7497]

I've noticed all your swaps are involving the 6.0 w/ 4 L 80 e trans, okay what about the OBS trucks with the NV 3500 manual transmission. Do you have any info on how to connect the wire harness to thet 5.3 LS.👍✌

[@markc4358]

Hey JR I just graduated college and just bought a Firebird v6 that I plan to swap a 408 stroker into. I’ve been researching (tons KZbin and forums) on engine building and swaps since 2019 so kinda understand what to do but never done it. This is my first engine build do you have any thoughts, comments, or advice on this plan?

[@carguy3028]

I did my swap in 2010 when there was a lot less information but fortunately most of it was good. I had a 383 with heads, a 243 duration cam and rpm air gap manifold that blew up. I replaced it with an lq4 with ls1 hotcam and nothing else done. I did have to rebuild it due to copper showing on the cam bearings but I had built engines before so no big deal. That near stock lq4 was 2/10s faster in the 1/4 than the built 383 that it replaced and it ran better on the street. I watch Richard Holdner too and I reach a different conclusion than a lot of people, I see the gains offered by the best and concluded it typically isn’t worth the money. I also see a lot of tests to get that extra 12hp are done with a fully built engine often a 408 stroker. Unless your engine is built to the max you mostly won’t notice the difference and your engine will likely run worse, the whole package has to work together. The best intake is typically the stock one, headers may be a good idea if the stock manifolds won’t fit, I went with headers because my 383 already had headers and going that rout was easier. Years later I modified the 6.0 and went down the rabbit hole to improve it but I had it running and driving while I collected parts, if plans had changed I would have lost money but still had a running driving 6.0 swap. For most people I think a 5.3 with an Ls6 cam would be spot on.

[@johnrusselsmurf4842]

Hi, Im JR as well! I own a muffler shop. Love the videos! Doing a LS SOON!!!

[@TheDrivewayEngineer]

Small world! It's easier than people think! You'll enjoy it

[@chadstevens8086]

I like your attitude

[@jamesgeorge4874]

Most people don't have the time, patience, or know how to properly assemble an LS. And watching someone who does, makes it look easier than it is.

[@TheDrivewayEngineer]

You know what's easier than properly assembling an LS? Not taking it apart in the first place.

[@jamesgeorge4874]

@@TheDrivewayEngineer I'd rather replace cam and rod bearings in a free LH6, than spend money on an engine I know nothing about, but I fix them everyday for thirty years now, and own all the cover alignment tools, plus it's getting a cam and springs, and gap the rings, so *not* taking it apart isn't really an option.

[@TheDrivewayEngineer]

I put mine together improperly without any alignment tools and do it in my driveway 😂

[@lexthelonewolf1864]

This video is very helpful and the guy is funny str8 Savage!!!😂

[@tturi2]

thank you for this video

[@danoschannel9543]

Gotta say, you have a great channel!! Lots of real world advice. I have an L33 going into an S-10 and need all the knowledge I can get. Anything specific to this engine you can offer? Again, great channel!! Keep up the great work!!!!

[@TheDrivewayEngineer]

The L33, as far as externally, goes in just like any other LS.

[@danielsmith-ze3wy]

👍 thanks for the video

[@flagcityparts]

Jr when you started in on turbos I had a moment of laughing at a neighbor that has squeezed every known hp out of a ls1.. next step is a 2 piece block..

[@markinsacramentoshow]

What do you think about DOD delete on a complete stock Gen 4 LS 5.3 with 243 heads stock trany stock computer

[@TheDrivewayEngineer]

In a swap, I would never, ever use a Gen 4 engine.

[@popo_53]

I actually had a 30k mile 4th gen 6.0 GM crate motor that had a trunion failure on cylinder 1. Still ran fine, lifter was just kicked a little because of missing needles.

[@TallGarage]

buying an incomplete engine is really up there on the dont do list, i feel into that trap but luckily it was so cheap even with the second engine i got i was still only in 200$, still spend more then i should have, but you learn.

[@chesterbunce3395]

More a question then comment. You have a ls vortex with 300,000 plus miles and still runs. You pull it apart and refresh or run it? I am the second owner sense 80,000.

[@TheDrivewayEngineer]

Why? Why? My house is 117 years old... Do I tear it down and rebuild it? Or go inside and take a nap?