3 Ways To Connect Scarlett 2i2 To Subwoofer & Speakers

[@EduanSteenkamp]

Great video thanks. I have been switching between windows sound driver and the Scarlett sound driver just to get my subwoofer to work. Finally it all works via the Scarlett, had it connected the wrong way around since all my labeling is in Chinese...Using the Edifier Studio Monitors MK4 and the Edifier T5 subwoofer. Works great and the sound is pretty good for the price I paid. Great for a budget small room studio. Not bad for bookshelf speakers pretending to be Studio Monitors. They got me convinced.

[@DANOVERBOARDvlogs]

Exactly what I needed for my set up. Well, except, I just need to pick up a sub now.

[@TheLionelBShow]

This video saved my life. Thank you

[@grubbylittlegoblin]

Super informative and clear!!! Love it man.

[@giovanniespinoza1495]

Can you add regular speakers that aren’t powered or studio?

[@DeanClean42069]

Method 4 for the poor: Use your headphone out on your focusrite scarlett to hook up your powered pc speakers and subwoofer (like the 10 watt pc speakers with subwoofers) - it still works, it may not be fancy thousand dollar studio monitors, but you can still make 10 watt pc speakers work for your focusrite scarlett. Everyone is trying to upsell you thousand dollar speaker systems, and yeah, the studio monitors do have really good sound quality, but my little 10 watt Phillips speakers put out pretty good when connected to the headphone out on the focusrite. No noise that I can hear. I don't hear hum. Sounds good enough to record and mix with. I mean if you got a thousand dollars to just toss away on speakers by all means go for it, most of the sound quality comes from the speakers. But if you don't have thousands of dollars to spend on studio monitors, you can make logitech or phillips or sony powered pc speakers work just about as good without breaking the bank. Sometimes you can find good powered pc speakers at the pawn shop for between 25 to 50 bucks. It may not be as full spectrum as studio monitors, as end-user speakers have their own eq curves and studio monitors give you more an idea of what it sounds like from a perspective of unadulterated speakers, but again if you can't afford thousand dollars on speakers you can make pc speakers work and they work pretty well.

[@TheTranspoter3]

Can you please make a video on adding studio monitors with sub woofer. As monitoring levels suitable volume and frequency. It will be helpful

[@amitbidaye7855]

ridiculously helpful and well done video man, thank you

[@bigdaddyreg]

Thanks for the amazing work, your videos makes my adaptation of audio gear for my podcast so easy

[@kettnercreative]

Great to hear!

[@BradRocker]

What brand of Cables are you using on this video ?

[@falcobudo]

but my scarlett 2i2 has only 3.55mm line outputs.... not 6mm. there are no such cables to connect it. how can i connect it to krk rokit 5?

[@JasonFay]

How do you setup a mixer and a Using PA System For Sound ? with Scarlett? Mixer to Scarlett to PA?

[@k8jun1]

Step 3 is the best setup

[@brynkirsch5195]

I love this guys passion for audio equipment!

[@safetyandsecurity5733]

Actually when connect the XLR the White color you don't focus so I can see it I wanna learn that would be nice if I can see it the RCA and XLR cable, but other than that this video awesome, thank you Sir I learn something.❤️❤️

Hi, what if my sub have only input? thank you :)

[@AndresMedinaVanegas]

What if my Subwoofer doesn´t have a Crossover? Does high pass filter or low pass filter work?

[@tarabarker6781]

I only have a limited supply of trs, can I use a single cable from the interface on the left channel to the left channel of the sub, then another single cable from the left output to the studio monitor?

[@Rptvrr]

No way this was a day ago 😂🤦‍♂️ I thought I’d give it another try after work today after having the sub as a book shelf for half a year when I couldn’t figure it out then/ find any decent help! 🙏🙏🙏🙏

[@kettnercreative]

Nice! Good timing!

[@RobJ-Lob]

It was so simple! Ts to rca and voilà! But I didn't expect that until I saw your video. So thank you very much! 🙏

[@shobiwii]

can you do the crossover for the yamaha hs8 pair and hs8s sub ?

[@kettnercreative]

You can. But it has a built in crossover that is optimized for itself.

[@imscottyspeed]

Thank you! I learned a lot from this

[@lancecohen9950]

I have JBL 5in Studio Monitors, and a JBL 10in Sub. I also have the JBL M-Patch 2 Interface, and a Focusrite 6i6. I want to hook them all up, to my desktop. I want to record my bass guitar... Please help

[@wastedWizard509]

great video can i buy those speakers as a set?

[@aslamabraham4555]

Great videos as always. Please post a video connecting the pioneer dm 40's and presonus 8 subwoofer to a pioneer ddj400, using a laptop and focusrite solo. Thanks in advance.

[@aslamabraham4555]

?

[@R.C.Bullar]

Great and informative video!

[@keithcook4537]

can it work eith big speakers 2000 watts?

[@mikewilkins5538]

Thanks for this video!

[@Shnowz]

I have a scarlett 2i4 currently running trs to two monitors. My sub only has a mono rca input so the plan was to run out from the scarletts rca 1 and 2 into the mono input with a cable that has two male on one end and one female on the other. From this description would anybody be able to tell me any glaring flaws in this plan?

[@Klooney9mm]

Similar to what I do with my 2i4 except my Sub has the correct L&R RCA inputs. As long as everything is coming from only 1 & 2 doubled up for the Sub everything wll work well. Side note the 2i4 is the best interface Focusrite ever. Crazy how everything is now so complicated with 3rd and 4th gen Scarlet systems.

[@obiwanshinobi5098]

Do all studio subs have those inputs/outputs anyone?

[@RhafaelAnastacio]

Thanks

[@tir1408]

ty

[@mikegreenebass]

Thanks. Perfect vid

[@kettnercreative]

Glad it helped

[@Monkeyboy_ce]

Thanks pal

[@kettnercreative]

You're welcome.

[@Rptvrr]

Ty so much! 🔥🔥🔥🔥🔥👏

[@kettnercreative]

You’re welcome.

[@TwistOfTransistor]

4:45 Red is Right, Black is Left

[@kettnercreative]

"Do as I say, not as I do". I'm an idiot. I always get stuff backwards when I'm doing it for the camera. But, yes - Red is supposed to be Right.

[@brynkirsch5195]

@@kettnercreative You're not an idiot!

[@brucegavin7614]

Hmm... calling a "plug" a "jack" makes me wonder about his actual knowledge. Your editor should have caught this fauxpas.

[@kettnercreative]

I’d be more than happy to issue a full refund on the video!

[@auzzybear]

@@kettnercreative perfect response🤣

[@flopcorn4124]

😂😂😂😂

[@carpediem4413]

Shooter McGavin with the worthless take … Jack/plug who cares 😂

[@alieninstallation50]

Thanks for the video!