EASY Connect Subwoofer to ANY Speakers (No Sub out)

[@Techscrews]

3.5mm splitter on Aliexpress: - s.click.aliexpress.com/e/_Deq7yCt RCA splitter on Aliexpress: - s.click.aliexpress.com/e/_DeHE17j Aux cable on Aliexpress: - bit.ly/3GqeiWb 3.5mm splitter on Amazon: - US amzn.to/3Q73krJ - UK amzn.to/3Q67Yqc - DE amzn.to/3YY7jLi RCA splitter on Amazon: - US amzn.to/3vpJ7nt - UK amzn.to/3WUyJ32 - DE amzn.to/3VAy3ia Aux cable on Amazon: - US amzn.to/3WrvekF - UK amzn.to/3VA5ocM - DE amzn.to/3Q5gwgE affiliate links

[@abyss8226]

As a complete newbie, I spent almost 7 hours trying to figure it out and you saved me many more hours. Thank you so much!

[@SqueamishPuppet]

If these signals coming out of the splitter are stereo, then you're only getting a L or R signal to the subwoofer. You'll want at least a mono signal to the subwoofer.

[@Techscrews]

it's not that simple, almost all music mixes bass freq works in both channels, also most subwoofers has 2 RCA inputs, that combine left and right channels inside. If you has subwoofer with only one LFE input, that simplest way is just buy or solder stereo to mono splitter :)

[@NordenEngineering]

@@Techscrews Surely if you join a stereo to mono splitter to the RCA imput on a subwoofer it will affect the audio source signal that is going to the hifi amp and make it mono

[@CapnGuitars]

@@NordenEngineering I was thinking the same thing. Surely it would load the input causing whatever channel is being tapped to be reduced in volume. Passive mixing always has losses.

[@ontherecordco]

Hi there, I'm trying to connect a Logitech x230 with a Logitech x540. I have them both running into a 3.5mm splitter into my laptop. It works but when I play them together the bass disappears. If I turn one system up the other loses bass. Do you know what this might be?

[@Techscrews]

Maybe it's a faulty splitter. Check it by connecting headphones to one splitter output.

[@PsychicVibez]

I have Mackie CR4 speakers which consist of one passive speaker and one powered speaker. I want to connect a subwoofer that has 1 line in only(no other in/outs and no power cables). Is there any way to connect it with Mackie?

[@Techscrews]

You need one more time, more carefully watch my video. You don't need to think about your speakers. You need a splitter from your sound source.

[@PsychicVibez]

@@Techscrews Okay.. will try it today. Thanks for helping out :)

[@shammidang5149]

Can we use this type of connection method by taking an optical-toslink out from TV and then using a decent quality external DAC that has RCA/aux out. I have a Dac that has only one RCA out so will it be fine to put an RCA splitter and and take two connections, one directed to an active subwoofer and other directed to the main amplifier.

[@shoerice5083]

My situation is pretty sad. I have a reciever with no pre amp sub connection, and my subwoofer has no wire connection, only a single LFE port... i can technically connect the sub to the line out port with an adpater, but the volume will not be adjustable through the reciever, but only from the main signal source (phone,pc) Is there any way to approach this differently?

[@Techscrews]

Where is problem adjust volume throught main signal source ? What kind of model is receiver?

[@shoerice5083]

@@Techscrews yamaha RS-202 Has no sub out, just an RCA line out probably for recording or something like that Its stupid that they didn't dedicate a sub out

[@user-ox5lk2ze2b]

Sir, I am planning to buy Edifier T5 active subwoofer. It doesn't come with Bluetooth option. Can the subwoofer be connected to a normal Bluetooth soundbar with AUX ? I want to use the subwoofer as a Bluetooth audio system. Your input would be helpful.

[@RaniRani-zt2tr]

Yes it can with an appropriate splitter

[@user-ox5lk2ze2b]

@@RaniRani-zt2tr thank you for the input.

[@RaniRani-zt2tr]

@@user-ox5lk2ze2b no worries

[@BobGerry-s2v]

I have a sumsung subwoofer and I'm trying to find a way to spice it to my sound bar would you have any idear how ?

[@mm-hq4qh]

connect hi fi to pc mobo and woofer to headphones , works :)

[@cvgk]

Can you suggest on the possible options to connect an active Subwoofer (additional) to the existing traditional sony 5.1 Home theater which by default give High level ouput to Passive sub....? What I want to achieve is would like to use Both active and Passive sub from the same High level output signal from rear panel sub connections???

[@Techscrews]

please give models of devices.

[@jackykong4542]

Hi sir, im trying to making sure my thoughts was right from what I learn from your video. So for pc user like me using 3.5mm jack , I will need 2 Aux cable and 1 3.5mm splitter. 1 Aux cable to connect to my speakers and another Aux cable to connect my subs, both of these Aux then are gonna connect to the 3.5mm splitter and this splitter will connect to my pc. Is that the way?

[@Techscrews]

100% right :)

[@jackykong4542]

@@Techscrews Ah, thanks sir! One more question sir, does this setup only work for active subwoofer? Actually im using a multimedia speaker atm, the logitech z333. One of the speaker was broken now, so im actually thinking of getting the swan os-10 and paired with the z333 subwoofer atm. Will that actually work?

[@Techscrews]

Yes, it works. Just disconnect the second Z333 satellite speaker.

[@jackykong4542]

@@Techscrews thank you sir!

[@reubenmashifane258]

Hi I have M-Audio BX4 monitors is it possible to add a subwoofer to them even though they don’t have subwoofer out port ?

[@mr.blacrage2259]

I cant seems to find that splitter you are using please help the 2RCA to Audio Jack please send link

[@unfps3886]

Hello I have a Samsung MX T70 can i Connect with a soundbar Samsung or with the active subeoofer?

[@wyvern132]

Would it be possible to split a speaker wire like this? I have a sub with speaker level inputs. I would like to connect my amp to both my speakers and the sub via speaker wire. However, I am unsure how to do this as I’m unfamiliar with electronics.

[@Techscrews]

But for that sub has rca inputs ?

[@wyvern132]

@@Techscrews the sub does also have line in/out. Looks like RCA (it’s the real speedwoofer 10Smk2)

[@Techscrews]

@@wyvern132 then where is problem connect it like in this video with splitter ?

[@wyvern132]

@@Techscrews My amp does not have an RCA out, only speaker wire out. The amp is where the volume control is. I would like to connect my dac to my sub and then from the sub to the amp, but I do not have a subwoofer out from my dac

[@wyvern132]

Sorry my bad, I didn't think up of connecting two speaker wires to a binding post (1 by banana plug, other by looping the wire by the hole). Realize my mistake

[@SportySport060]

this would work say for a pc 2.1 bass? i got one lying from my creative a320 2.1 multimedia speaker..

[@Techscrews]

Yes, you can connect an additional subwoofer to your Creative A320 system.

[@SportySport060]

@@Techscrews Thanks! how about connecting the A320's subwoofer to a soundbar using this method, is that possible?

[@JumpUpArchive]

Hi Techscrew, I want to connect my Logitech Z333 speakers to my Trust Tytan subwoofer. Is there an adapter or a way to make this happen? I only want to do this because the Tytan's subwoofer is way better than the Z333's. The Z333's speaker wires are red and white, I think that's RCA and the Tytan Subwoofer has black and blue inputs, I don't want to try plugging them in because it might break my speakers.

[@Techscrews]

give me models.

[@JumpUpArchive]

@@Techscrews Trust Tytan 2.1 and Logitech Z333. If you need model number I can try and find that out for you.

[@windowshater-j8b]

I have a question, i want to to buy one of the rca splitters but they're only cables so i have to use wich color (of the rca output) to connect to the subwoofer (with the splitter)? It would be nice to have an answer, thx!

[@Techscrews]

no matter, just one collor mean left channel, second righ channel. what equipment do you want to connect together, models ?

[@windowshater-j8b]

@@Techscrews I tried to connnect as speakers the majority d80s, my laptop as output (aux) and im not sure wich subwoofer i should buy, could you recommend me one for 100$ wich fits into splitters?

[@ilyecstasy]

I have a klipsch r100sw and alesis elevate 5 mk2s would this work for that js wanna make sure before i spend my money

[@Techscrews]

yes, it would work, but i recommend use studio type subwoofer, which has a built-in audio crossover for speaker ouput, that cut off low freq from small speakers and sound resut will be more better and louder.

[@prateekbhardwaj9943]

do i need high to low lever converter(line converter) ? i want to connet 2channel sterio (sony mhc) with no pre out , to acoustimas active sub(with single rca input) dont i need high-low converter?

[@Techscrews]

that sony mhc is single bluetooth speaker?

[@prateekbhardwaj9943]

​@@Techscrews it only have left right rca inputs. its a music system vintage cd audio mini hifi system no Bluetooth. i want to connect my mono rca input bose acoustimas 16 subwoofer so i can enhance bass

[@boydpriyanthamendis681]

understood your valuable info thanks, why does my sony sa w305 having speaker out channels there which never gets sounds if we connect external speakers to it. Is there any thing to do our selves to activate it. Pls reply, thanks

[@Techscrews]

it's high input level. This subwoofer has two inputs, low level rca and high input, when input signal take from power speakers. These not power outputs.

[@boydpriyanthamendis681]

@@Techscrews so what's the use of speaker line out there

[@Techscrews]

@@boydpriyanthamendis681 where ?

[@boydpriyanthamendis681]

@@Techscrews in our sa w305 having speaker in and out prs. So I am asking what is the usage of speaker out there

[@jasonhall2984]

Hi, I have a question. So Can u hook up a samsung ps-wk450 wireless subwoofer only to a Yamaha surround sound reciever?

[@sachinkushwaha9238]

I have a 5.1 home theatre system in which amplifier is inbuilt in the subwoofer i want to make it 5.2 that makes it 5 sorround speakers and 2 subwoofer...i have 1 passive subwoofer of sony ...please guide me to connect it to make a 5.2 sorround sound system.

[@Techscrews]

system model ?

[@bogdaniorga2174]

What is the RCA female to RCA female and 3.5 female splitter that you did not include into the description?

[@Techscrews]

You can use any splitter

[@adctex]

Trying to connect to a Polk DSB2 subwoofer that is entirely wireless to a different brand soundbar. The only cord that is connected to the subwoofer is the power cord... no input or output jacks. My soundbar, ZVox AV155 does have pin plug output jack for it's intended subwoofer. Any ideas on how this could be make to work...??

[@Techscrews]

Take out polk sub amp, buy some custom subwoofer amplifier board and done

[@adctex]

@@Techscrews - I will Google "subwoofer amplifier board" and see what I can find.... thanks for pointing me in a direction that might accomplish this...

[@boydpriyanthamendis681]

Can we use single RCA ( either White or Red cable ) to connect splitter to subwoofer or is it dedicated RCA single line ? When need to fix 2 stereo active speaker bar which having wired connections , what is needed to use for plitter side connector , at the speaker end i suppose need it to be paralled

[@Techscrews]

better for subwoofer use stereo sound, two rca, that give higher input level.

[@ShahriarAlomRasel77]

Hi bro, I hope you are well. Please answer, logitech z906 extra subwoofer connection. Thanks 😊

[@cocobaygyan]

I would like to use my sub woofer from hk Soundsticks. Please advise. Thanks in advance.

[@mantana6774]

New Help, have this klipsch sub 10 subwoofer, Trynna get it to connect to my edifier R1280db. Dont have a receiver just a whole lotta RCA cables, Let me know! Also I’m on a PC

[@Techscrews]

Give me full your system devices models.

[@afaantao4041]

Thank you! You made it very simple.

[@JapraX]

If i use focurite solo which has only 2 output, and that connected with TRS to my monitor speakers L and R.. What do i do to connect my woofer which only has 1 input

[@Techscrews]

these are studio monitors or multimedia/home speakers ?

[@JapraX]

@@Techscrews just for multimedia like listening music, gaming, movie, sometimes recording guitar for fun.. I'm a lil bit confuse which out put should I split.. The L one or R one

[@keijahproductions]

i have a sub with a L and R ONLY (rca) *not plugged in* I have a sound bar thats L and R rca that combines to a 3.5mm jack that is plugged into my pc. How do i connect the sub?

[@nancythompson3282]

Hello techscrew - I have a small bluetooth speaker with 3.5 output. Can I use this as output device for Logitech computer speakers with AC powered subwoofer? I can keep the bluetooth speaker powered up by having charger connected.

[@Techscrews]

@@nancythompson3282 you need try this

[@Yandross]

Excellent video. I'd like to connect the subwoofer of my Logitech Z623 2.1 to the speakers Edifier R1855DB (These have a sub out 3.5 connector). The thing is, the subwoofer only has 2 types of imputs, (1 RCA white and red and one 3.5 green) and doesn't have outputs whatsoever. The subwoofer has a power cord but not a switch on a and off, it is controlled by the right Logitech speaker (through a weird serial-like port). I'd appreciate any guidance you could provide me with.

[@Techscrews]

simply connect logitech green 3.5mm to Edidier 3.5mm sub out, this port give sub freq and logitech works like regular active subs.

[@Yandross]

@@Techscrews thanks a lot mate, most appreciated.

[@chamin8592]

Is it possible to do this with a passive subwoofer?

[@Techscrews]

Yes, but it needs an amplifier, and the other steps are the same.

[@ROCKgivesYouLife2003]

Hi, if i have edifier r2850db can i put subwoofer Alpine Bass Reflex on it? It's auto sub 800w 250wRms

[@Techscrews]

yes, but you need car amplifier, but how to connect car audio in home, check this video: kzbin.info/www/bejne/eqGpimyDrb-thac

[@Mr-visible5]

Hi 👋 my small home amplifier doesnt have sub out rca . It has other rca input and output .and my subwoofer have white rca 'amplifier in' and red rca 'subwoofer out' . How do i connect help me 😢

[@Techscrews]

What kind models?

[@Mr-visible5]

@@Techscrews sansui HT-4000 subwoofer 🙏 help me

[@Mr-visible5]

@@Techscrews I have a new amplifier who doesn't have sub out only

[@gamermonster876]

I’ve been searching for about an hour now my sound bar has a subwoofer output. It’s only one my subwoofer plugs into it and there’s two little wires connected to the one port. I want to find a splitter that makes it two ports but I can still use my subwoofer and get another of the same, and have two subwoofers plugged into the splitter one subwoofer gets one side of the splitter and the other subwoofer gets the other side, but I can’t find anything like that if anybody has any answers for me please tell me😊

[@Techscrews]

@@gamermonster876 what is model for soundbar and where it is connected now ?

[@MohdArhan-zj5se]

I have a sound bar (bluetooth) and a subwoofer (wired). My sound bar has RCA port as input but no output, and my subwoofer has both input and output. Is there any way i can connect both the devices and listen while connected to bluetooth. Please help

[@waheedahamed1562]

I have onkyo powered subwoofer with coaxial input and my tv also have coaxial . How to connect? I directly connected coaxial cable to tv but woofer don't produce base. What to do?

[@Techscrews]

@@waheedahamed1562 subwoofer with coaxial input ? give that subwoofer model.

[@CalKP_Selectah]

Hi, I cannot seem to find the RCA female to RCA female and 3.5 female splitter you included in the video anywhere?

[@Techscrews]

what you want connect, give models and I help you.

[@CalKP_Selectah]

@@Techscrews My current setup is an XDJ RR with RCA outputs to pioneer DM-40. I have just bought a Subwoofer with RCA inputs and I have a RCA to 3.5mm cable

[@bogdaniorga2174]

Did you find it?

[@bayuseptian6264]

how about if active subwoofer connect to PC or laptop without amplifier?

[@Techscrews]

active subwoofer already have inside amplifier :)

[@deepitkujur5486]

How to add sub when i have used optical input from tv

[@Techscrews]

input or output ? FOr output you can use smple converter: Optical to RCA on Aliexpress: - s.click.aliexpress.com/e/_DE9nsP5 Optical to RCA on Amazon: - US amzn.to/3XteTyL - UK amzn.to/3X90Tc5 - DE amzn.to/4e8PIH8

[@user-wv7sq7rz8e]

this worked perfectly but i’m only getting L audio not R. anyway you can help?

[@Techscrews]

what kind on models ?

[@user-wv7sq7rz8e]

@@Techscrews sub is Sony SACS9 and computer speakers are pebble speakers.

[@user-wv7sq7rz8e]

@@Techscrews not the greatest speakers so i might have to upgrade

[@Techscrews]

you need this type splitter, to get in subwoofer stereo audio - s.click.aliexpress.com/e/_DC1Gu0F

[@user-wv7sq7rz8e]

@@Techscrews thank you brother : D

[@VipinPG77]

great that solves the problem such a simple solution Thankuuuu

[@Techscrews]

Happy to help

[@cebuanostud]

Hello I connected(one end) the 3.5mm to my pc and the other end(RCAs) only one to the input of my powered sub. I turned it on and I can only hear the lows. Now my sub has output for speakers using wires. So my question I guess can I just easily connect those speakers to the output of my powered sub and thing will work fine? I'm just asking first cause I still need to get the speaker wires. lol thanks in advance.

[@Techscrews]

allmost all active subs dont have active output for speakers, what kind of models are in your system ?

[@cebuanostud]

old Sony powered sub@@Techscrews

[@tubagzn2]

Hi i need help, ihave edifier s1000w and i plan to buy polk hts 10 subwoofer How i can connect? Iwant to use it with my tv I use optical cable I just connect RCA to RCA from speaker to subwoofer and then also connect it to optical?

[@Techscrews]

there are some problems, because toslink cannot be split like rca and speakers dont have sub out. Simplest way is use tv 3.5mm out and split it to speakers and subwoofer, then set both systems max volume for your taste and then change sound level only with tv remote, that will change sound level simultaneously for both systems.

[@tubagzn2]

@@Techscrews oh okay so i need aux cable and 4 rca right?thx for the tip

[@roadtrip4121]

I love ur commentary:3

[@ragestarter]

do you have a link to the box you connected to your phone?

[@Techscrews]

you can use any 3.5mm splitter: Aliexpress: - s.click.aliexpress.com/e/_Deq7yCt Amazon: - US amzn.to/3VMfKdE - UK amzn.to/3VKV4Tb - DE amzn.to/3VOHGxl

[@saravanansara6163]

Hye 👋 sir. How want to connect passive subwoofer Sony to New amplifier system.

[@Techscrews]

Could you please let me know the exact models of your passive subwoofer and amplifier? This will help me guide you on how to connect them properly.

[@jonrinonos873]

What's the link for audio source?

[@Techscrews]

You can use any sound source.

[@SayaAmirulSyamim]

question , why is there a DX3 ? I'm confused

[@Techscrews]

you can use any sound source :)

[@alex_mtb1409]

If I have a passive subwoofer,does it still work?

[@Techscrews]

Yes, but you need amp for it

[@cleangoblin2021]

Not gonna affect sound quality of the subwoofer? I mean wont high frequency leak out to the subwoofer speaker? I thought subouts are special because it only reads bass and sub bass

[@Techscrews]

it doesn't affect the sound quality, most subwoofers come with an audio crossover where you adjust what frequencies it should play.

[@carloscarvalho1961]

Thank you. You were very helpfull.

[@Techscrews]

Glad it helped!

[@adamcomments9606]

my woofer doesn't have a power cord it's says 70, watts do I just connect it to the soundbar?

[@Techscrews]

Its passive subwoofer, there need amplifier before connect it to sound source.

[@adamcomments9606]

@@Techscrews I Did it it has steel wires on it I connected the wrong one I connected it to port on sound bar now it works

[@AD_Nation]

Is it possible to add subwoofer to Bluetooth speaker with cable??

[@Techscrews]

No.

[@Lelle80]

What song is this?

[@Techscrews]

you mean this song ? kzbin.info/www/bejne/f56QgZ-Gra2Chqc

[@Lelle80]

Yes thanks @@Techscrews

[@original.dwornboy]

Now I know what AUDITING BRITAIN does in his spare time.

[@MrRourk]

I always forget if it is the left or the right you want it hooked to? It is the one side of the symphony that produces all the bass so that is the side you hook to.

[@Techscrews]

therefore use subwoofer with two rca inputs, at this moment i have only this old Pioneer subwoofer.

[@MrRourk]

@@Techscrews as long as it works

[@fuchsinator7054]

I dont know if you still read your comments but, my speakers have a headphone jack and connect to the pc via that. The subwoofer wich is 11 years older has an slot where it says input, where headphone jack is supposed to go into the slot can i just connect my speakers to my subwoofer and then my subwoofer to my pc?

[@Techscrews]

that is input port ? What is system models ?

[@TinkyWinkyUK]

Cool!

[@kjellman96]

Thank you

[@crystalsk2335]

Brother please do something for portable Bluetooth speaker users like us.. they have good sound though but lacks in bass.. please help us and we will be thankful to you 🙏

[@Techscrews]

You can use this methot only, if your bluetooth speaker has 3.5mm aux input.

[@gtcreeper]

Nice bro

[@sulaisha6035]

What if the audio source is Bluetooth.

[@Techscrews]

But bt receiver also is output, how it get soumt to main speakers ?

[@mr.blacrage2259]

Hi please provide diagram

[@Techscrews]

what kind of ?

[@fffffffffax]

uhm. you’d really wannna sum back the L/R signal i think to the sub. you just hooked in iether left or right channel which is quite odd.

[@gamermonster876]

If I’m correct you’re asking why he is connecting one subwoofer to the left and one subwoofer to the right See what I think he’s doing the splitter he plugs the wire that’s meant for the left into the left one and the one that’s meant for right into the right one then he takes the other one and does the same thing with the open port basically what I’m trying to say is he only use one of the female ends on each of the splitter if you don’t understand, I’m sorry but in my mind that makes sense

[@jonathanramsey8582]

Suddenly my subwoofer and left side speaker connecters don't work

[@chokrashetty]

Does the 3.5mm splitter affects the sound quality in both speaker and sub?

[@Techscrews]

Not real

[@zachm3184]

The audio capture is too bad to hear any difference

[@Techscrews]

Your playback device is bad quality.

[@zachm3184]

@@Techscrews no the audio

[@Techscrews]

@@zachm3184 okey, maybe it's sound better, your playback device can't play low freq.

[@zachm3184]

@@Techscrews Yes

[@Kooltan]

Yay now my sub is going to playing frequencies it’s not supposed to

[@Techscrews]

therefore use subwoofer audio crossover

[@x-ani4061]

"hear this" me with no subwoofers so i cant even tell

[@DescartesRenegade]

Bet you cant connect a sub to a set of Active speakers thats running on a digital input (internal DAC) and has no analog output.

[@Techscrews]

True, for bluetooth speakers this method do not work.

[@NoxYotsuki]

deveras interessante!

[@edizaygun9046]

İts ont vork m sutudyo subwofer

[@Techscrews]

Eng please

[@BoRerunn]

Doesn't explain nothing

[@Techscrews]

it looks like you have problems concentrating, try video speed on 0.5

[@omarrojas406]

😂😂😂😂

[@DriftingVoid]

Maybe learn English before commenting

[@mutombosays780]

​@Techscrews how do I connect a car subwoofer into aux? And to give it power.

[@KenIbenduova]

*anything.

[@drvivekmallan]

Very confusing

[@Techscrews]

what exactly is confusing ?

[@drvivekmallan]

​@@Techscrews Figured it out eventually, thanks. I have a sub from my old 2.1 system that has an integrated ampnl built into the subwoofer but it has no crossover control knob. How can I adjust the frequency now? Is there any way to DIY add crossover control knob to the existing SW. TIA

[@Techscrews]

i think, that it has built it audio crossover, for example THX 80Hz has already set in sub.

[@drvivekmallan]

@@Techscrews Ok thanks