35 Inch Tires, No Lift! 2020 Jeep Wrangler JL Sport! Review! How to Buy!

[@mikeconner3748]

For anybody interested I put 285/75/R-17 Nitto Ride Grapplers on a stock 2022 Willys. These have a 34 inch OD, they fit fine, no rubbing anywhere. I did have to raise the spare tire mount to clear the bumper. Used a Quadratec adapter for that. I believe it was about 80 dollars and took an hour to install.

[@lukesworkout2232]

Willys sport or rubicon?

[@fordracerforever]

Many people say you can’t go off-road with 35s and no lift, but haven’t tried it. Unless you already have experience and like wheeling difficult trails this is a great set up if you’re starting off with easy to mild trails.

[@spartanwk2103]

I had a buddy go offroad with 35's and no lift.... lets just say he went ahead and got the lift.

[@fordracerforever]

Platinum Wave Sounds did he have flat fenders??? I rubbed with stock fenders on the street. The flat fenders made the difference. Like I said mild trails. Nothing too flexy but enough to get you hooked and building up your rig as you get into more difficult trails.

[@asperbergers7136]

@@fordracerforever Different fenders will definitely help. However your articulation is not going to be as good say if you just went ahead and threw on a 2.5" lift. You still keep that lower profile and can flex a little more. Just my opinion though from experience.

[@fordracerforever]

@@asperbergers7136 yea that’s true another thing is that I noticed is that the rubi springs give you and additional .5”-1” of clearance. But yes 2.5” is what I would go with

[@brianparkhurst1019]

"It's a great time to buy one with all the incentives and discounts that we have on these." Man, those were good times.

[@eddtv4548]

Nice! What tailgate reinforcement is this

[@shanesr72]

Do you have to change out the rear fender flares as well? I have a 2021 wrangler Willys edition, and i want to put bigger tires without lifting it

[@mikeconner3748]

Mines a 2022 Willys and I'm running 34 inch Nitto Ridge Grapplers, no rubbing. You will have to raise the spare tire mount. I used a Quadratec adapter.

[@danepickens508]

Why is the top off like its beach ready

[@jaic93]

So what other calibrations other than the speedometer ones did you guys do .

[@Bondovi18]

Rubicon fenders are color matching. What is he talking about??

[@antmrod5198]

Could you please give front flares reference or part number? Are they the same as the Rubicons or (even) higher? Thx. 🤙

[@robertwidmer]

Not sure about the front specifically, but I put 82215742AC (includes all 4 fenders) on my 2020 Sport. They are the same as the Rubicon fenders.

[@thatonedude926]

Ebay, all 4 high center fenders 700 all 4

[@jeffdavis5961]

Rub a dub on the trails. Better not disconnect that sway bar.

[@denykay1]

Why do all these, no lift, videos always use a Rubicon? It really is lifted compared to a Sport, Sport S, or Sahara. Not to mention a higher mounted fender. So, the 35s are going to cause problems on the non Rubicons.

[@dirge4november84]

This is a sport NOT a rubicon.

[@LarryRichelli]

So does you service department condone 35" tires on a wrangler sport with the dana 30 front axle? Seems a little too much for the axle.

[@LukaDaudt]

35s are okay for the dana 30. Many people running it since release with no issues. 37s are questionable though.

[@LarryRichelli]

@@LukaDaudt I just had my wrangler regeared to 488 and put 37s on it. It feels like stock again!

[@LukaDaudt]

@@LarryRichelli That's awesome! I currently have 35's but sometimes I long for 37s

[@hellaacapella]

Looks cool but not practical for off-roading especially in the SW United States terrain

[@JohnPaul-jn1fo]

topless and no doors while it’s snowing and cold. why?

[@Kunescountryvideo]

Only in a Jeep ™

[@rickroopedc8424]

What is the name of the spare tire reinforcement

[@asperbergers7136]

The logo on it is Rugged Ridge.. Looks like its the Spartacus Tire Carrier. ruggedridge.com/p/rugged-ridge-spartacus-hd-tire-carrier/rgr-11546-56/

[@ghaithalkiyumi8534]

hello, these fenders from rubicon ? and did fit with no modifications?

[@DCSpyDog124]

Would really like to see a reply from Kunes Country TV on this topic.

[@BlackJeepConvertible]

They’re rubicon fenders

[@abhimankalu9960]

Do you need spacers to fit these 35s?

[@Kunescountryvideo]

No spacers needed

[@SynysterGoose]

This has the Rubicon fender flares on don't forget.

[@BlackJeepConvertible]

It has aftermarket wheels that stick out further so no spacers needed

[@adrianluckhurst4522]

Hi Guys... Great vid and advice. Absolutely love the Black Rhino (Fury) Wheels... I live in the UK and want to get some for my new Wrangler JL Overland. Please can you confirm 1) Wheel size (17") 2) Bolt Pattern (5 x 127 or 5 x 139.70) and 3) Wheel Offset (0 / 12 / or -18 offset) used on this Jeep..? Much appreciated..!!!

[@johnnyf6367]

I’m wondering all that too!

[@bjputnam996]

I’m guessing 0 or 12?

[@b87flst]

What's the name of the Black Rhino wheels?

[@Kunescountryvideo]

They are the Black Rhino FURY. www.blackrhinowheels.com/off-road-wheels-rims-fury.php

[@b87flst]

@@Kunescountryvideo Thank You

[@MrScorpioknows]

what is wheel depth

[@Kunescountryvideo]

www.blackrhinowheels.com/off-road-wheels-rims-fury.php

[@buffhorses3632]

"Low center of gravity package" Translation. We didnt want to spend the money putting a lift on so we'll act like its a feature and try to sell this to first time offroad buyers who are ignorant to suspension travel and clearance.

[@lukesworkout2232]

It's the non build build

[@2asianguys667]

Can the axle be able to handle it???

[@lukesworkout2232]

Define it.