Tap to unmute

3D print bulldozer part 1

  Рет қаралды 8,283

Domingo Martínez

Domingo Martínez

Күн бұрын

Пікірлер: 39
@Evilslayer73
@Evilslayer73 11 ай бұрын
BEAUTIFULL RC bULLDOZER!!
@domingomartinezt
@domingomartinezt 11 ай бұрын
Glad you like it
@_RCPrinter
@_RCPrinter Жыл бұрын
Another masterpiece has been created, first the wheel loader and now the D6 caterpillar! Thank you so much that another dear person enriches the hobby so much. I'm really excited to see which model you'll introduce to us next! Maybe a crawler excavator? Many greetings and all the best! Harold
@domingomartinezt
@domingomartinezt Жыл бұрын
Thanks for your support. I do my best on my designs to have an extra value!!
@TheStaomen
@TheStaomen 5 ай бұрын
nice build!
@domingomartinezt
@domingomartinezt 5 ай бұрын
Thanks!
@gamesgameplay2867
@gamesgameplay2867 3 ай бұрын
I like your battery pack bro❤
@domingomartinezt
@domingomartinezt 3 ай бұрын
Thanks!! They are good and adorable
@cat-cambodia1801
@cat-cambodia1801 Жыл бұрын
Wow ,love rc bulldozer 😍😍😍
@domingomartinezt
@domingomartinezt Жыл бұрын
I love my design, and it is so satisfying to build and drive it 👌
@chriscumming8529
@chriscumming8529 2 ай бұрын
How will itt coast 2 build 1 for me.??..wit out d ripper.??.
@domingomartinezt
@domingomartinezt 2 ай бұрын
It takes time and labor to assembly, it will no be cheap.
@martin661962
@martin661962 Жыл бұрын
15:30 Congratulations. I’m sure you put many hours of work into this design and build. I would love to get into the RC construction hobby, but most of the hydraulic RC vehicles that have the capabilities I would want, are out of my price range ($4 - $8k Australian) . So, the idea of buying a 3D printer and electronics and making my own is very appealing. Some newby questions please: 1. What type of 3D printer do you use? 2. What type would you recommend? 3. Which material do you recommend for printing these vehicles? 4. Are the tracks likely to ‘derail’ in tight turns in soft surfaces? 5. I would like my vehicles to be yellow. Is it better to print in white, then paint? Why don’t you print in yellow? Many thanks, Martin
@martin661962
@martin661962 Жыл бұрын
Ok. Thanks. Perhaps I’ll post the same questions on Facebook.
@domingomartinezt
@domingomartinezt Жыл бұрын
Thanks, yes it takes many hours and research to build something like this, and I appreciate all people that support and buy project. 1.- I use Anycubic Chiron 3d printed I bought it two years ago on sale for $350 dollars, it has a enormous build bed 400mm x 400mm but is it really slow. 2.- I recommend bamboo printer they disrupt the market with their models. 3.- PLA or better PLA+ 4.- Track have never derail or broke on me on this build, even on soft surface like the one on the video I'm really please with the performance. 5.- I printed in white and black since those color are the less spences one in Amazon, and I use primer to give a better finish before painting with acrylic water base paints. Hope I clarified your questions best!!!
@smithbayca1
@smithbayca1 Жыл бұрын
How much does it weigh? What kind of motor does it have? .. what’s the cost?
@domingomartinezt
@domingomartinezt Жыл бұрын
6.5 kg, the motor is in the description: 5840-555 Motor at 80 RPM, approximately $300 in materials plus the cost my project, link bellow in the description.
@cooperthomas1
@cooperthomas1 9 ай бұрын
Is there somewhere where you list the products needed?
@domingomartinezt
@domingomartinezt 9 ай бұрын
It is inside the project also you can have an idea on the videos
@Lolitaa-ecuestree
@Lolitaa-ecuestree 2 ай бұрын
Me aria falta solo el stl delas orugas .como puedo conseguirlo
@domingomartinezt
@domingomartinezt 2 ай бұрын
Hola, el archivo stl esta en el mismo projecto abre el manual en pdf y revisa que letra y numero de la oruga. Luego ve a la carpeta de stl y encontraras la letra y numero the las orugas, es solo una, tinene que duplicarlas en tu inpresora.
@orlandomaia5384
@orlandomaia5384 Жыл бұрын
What sound module did you use?
@domingomartinezt
@domingomartinezt Жыл бұрын
Esp32 sound and light by dyiguy999
@brunomarcos6966
@brunomarcos6966 11 ай бұрын
How do I acquire the machine’s measurements?
@domingomartinezt
@domingomartinezt 11 ай бұрын
In the link to cult3d, there is an image with all measurements
@soyemiolamide4005
@soyemiolamide4005 11 ай бұрын
How much would you charge to 3d print this if I send the stl to you?
@domingomartinezt
@domingomartinezt 11 ай бұрын
Hi, you can write to me on the Facebook group, and we can talk.
@chriswright3463
@chriswright3463 Жыл бұрын
Brilliant build how much for one
@domingomartinezt
@domingomartinezt Жыл бұрын
You have to 3d print the project, plus the materials are around $400
@miniaturasmoura
@miniaturasmoura 11 ай бұрын
Boa noite como faço pra adquirir esse arquivo?
@domingomartinezt
@domingomartinezt 11 ай бұрын
Thr are for sale here cults3d.com/en/3d-model/gadget/radio-control-medium-bulldozer
@AakaarLab
@AakaarLab Жыл бұрын
Awsome
@domingomartinezt
@domingomartinezt Жыл бұрын
Thanks!!!
@vinhtien9129
@vinhtien9129 5 ай бұрын
Cho em xin file miễn phí được không ạ
@domingomartinezt
@domingomartinezt 5 ай бұрын
It took 6 months of my free time and dedication to make this project, I only ask for small return, selling it at a price.
@xiaoguanning
@xiaoguanning 7 ай бұрын
这小东西真可爱
@domingomartinezt
@domingomartinezt 7 ай бұрын
是的!谢谢。
@Lolitaa-ecuestree
@Lolitaa-ecuestree 2 ай бұрын
Hola...
@domingomartinezt
@domingomartinezt 2 ай бұрын
Hola ya respondi tu pregunta en el comentario anterior, que tengas un buen dia.
3D print bulldozer part 2
19:35
Domingo Martínez
Рет қаралды 4,4 М.
3D Printed Tracks - Will they work?
19:19
Burnie222rc Lasse Anhanger
Рет қаралды 6 М.
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
BULLDOZER CAT D11 NEW CONVERSION BRUDER RC
15:21
Juan Urbaneja RC
Рет қаралды 6 М.
3D print bulldozer working on the field
2:08
Domingo Martínez
Рет қаралды 4,3 М.
3D Printed 1/14 Wheel Loader Sweeper CT249
4:42
CT3D-Design
Рет қаралды 1,2 М.
3D Printed RC Crane - DIY
26:18
ProfessorBoots
Рет қаралды 367 М.
I 3D Printed a TURBINE and Produce Electricity With It.
10:38
Let's Print
Рет қаралды 615 М.
Conversion - RC CAT 297D2 Diecast Masters compact track loader.
13:50
Bartste RC Models
Рет қаралды 83 М.
3D print bulldozer part 3
30:16
Domingo Martínez
Рет қаралды 7 М.
Big  1.3m long 3D printed  RC vessel  DFDS  "Ark Germania" 1:150 Scale
9:48
3D Printing Shipyard
Рет қаралды 20 М.
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН