408whp d16 civic (d-series budget build) vitara pistons

SpoolTek tuned
D16z6 e85
Dyno session
Vitara
Michiana Racing Channel

[@michianaracingchannel412]

Went to the track Friday night made two full hits, 11.80 at 120 with a 1.72 60’ was best of both passes video will be up this weekend thanks for watching guys stay tuned !

[@michianaracingchannel412]

Announcement everyone our budget d series is in the 10s check out out new post to see the pass !

[@victor6240]

Sick build, hoping to build mine for track this upcoming year.

[@michianaracingchannel412]

Thats awesome we are shooting for a 10 sec pass with this car next season

[@michianaracingchannel412]

New personal best 11.4 off the trailer at Martin speed was only difference we made to car was location from oc Indiana to Martin Michigan lol

[@darbymcbride41]

I plan to use an hx35 also. Great vid. Nice build

[@FatSleepyPanda]

Dang, the only thing budget on that list is the pistons lol

[@michianaracingchannel412]

been running the same set up for 4+ years

[@TheImmuneZ]

@@michianaracingchannel412 same with d16z9

[@michianaracingchannel412]

@@TheImmuneZ that’s awesome z6 Ftw

[@v36vhr]

@@michianaracingchannel412 any issues with the cam? I ordered a bisimoto 2.4 turbo cam. I've heard bad things about it

[@michianaracingchannel412]

@@v36vhr no issues at all 4 years lots of abuse

[@gbGeniuss]

Great build mine 76mm vitara build how many pounds of boost u guy running?

[@michianaracingchannel412]

35psi now I’m the video around 28 psi

[@s550andrew]

Sounds amazing

[@michianaracingchannel412]

Thank you ! We appreciate the love

[@domenicstobie2163]

Is this a dd or track only car? Also I’m thinking of going with the bisi cam but mine is being built for the street and I’ve heard the 2.4 cam is prone to breaking after a few runs what are your thoughts

[@michianaracingchannel412]

Domenic Stobie sorta a DD and track car it’s gets driven ever week but not every day but could very well be a DD but would require more up keep

[@michianaracingchannel412]

Domenic Stobie we’ve been running the cam for 4 years

[@dragracemase]

No way this car has been ran hard for years with lots of street and dyno time

[@markc9986]

Awesome build! How are the injectors holding up ? And also are they high or low impedance? What did you do to have em run good ?

[@michianaracingchannel412]

They are great for power level ! Of the car if we change turbo well add another 450 and go id 2600 max injector but we’re good for now and I believe these don’t require restrictors but we ran them for 4 years so it’s been awhile

[@darbymcbride41]

I have some rc pl4-1200cc honda peak and hold injectors and an aem 10 channel injector driver. I'm really hoping I can use them on hondata.

[@SandGorak]

Wow fahhkin supa. How muk munehh

[@michianaracingchannel412]

Very little

[@colstonmulligan2598]

Hey quick question how did you rig up the rc1200’s I plan on running rc1000’s if the 1200’s are low impedance did you use an injector resistor box or use resistors

[@michianaracingchannel412]

I believe a resistor box

[@cedriccope178]

Sick

[@michianaracingchannel412]

Thank your. Bro !

[@pldjdhdhshzhdhehdhxbdbdbdh9695]

how much did this cost you to get it to this point

[@michianaracingchannel412]

500 into the engine

[@samo6973]

What size pistons ? did you have to notch the block for the eagle rods

[@michianaracingchannel412]

they are stock bore pistons vitara ! 75.5 yes block is notched

[@samo6973]

Michiana Racing Channel so 75mm?,

[@michianaracingchannel412]

Yes, no block guard. Tuned on hondata, by Joshua Lawson owner of SpoolTek in Laporte Indiana

[@samo6973]

Michiana Racing Channel do you have any lag on the hx35?

[@michianaracingchannel412]

Hx 35 has very minimum to little to no lag

[@BIGSMOKE-bl2lq]

Curious do you what duty cycle the injectors are at wide open

[@michianaracingchannel412]

60% we maxed them out at 28psi

[@robertlambert7906]

What fuel pump you use

[@michianaracingchannel412]

Hell cat 550

[@robertlambert7906]

@@michianaracingchannel412 lol I don’t need all that

[@leanranger6749]

What transmission bro?

[@michianaracingchannel412]

Stock d series mfactory dif

[@chavagonzalez2492]

What transmission are you using

[@michianaracingchannel412]

Stock trans

[@farrracing]

Did you lock vtec ?

[@dragracemase]

No bisi 2.4 cam

[@michianaracingchannel412]

No cam is not locked

[@robertbailey6747]

What head gasket you running? And fuel?

[@michianaracingchannel412]

Z6 arp head studs je pro seal

[@michianaracingchannel412]

Pump E85

[@el_coupe_belico702]

D16z6 transmission?

[@michianaracingchannel412]

Yes

[@joseamaya3352]

What’s done to the trans ?

[@michianaracingchannel412]

LSD mfactory gears it’s honestly pretty stock

[@jakeforsyth9183]

What size hotside are you running on the turbo?

[@michianaracingchannel412]

.63

[@michianaracingchannel412]

Hx35

[@jakeforsyth9183]

@@michianaracingchannel412 where did you get the housing from?

[@jakeforsyth9183]

@@michianaracingchannel412 I just got a .70ar but I’m assuming you’re 7.5:1 and I’m running 8.7:1

[@jakeforsyth9183]

@@michianaracingchannel412 also what size oil feed and restrictor are you using?

[@michianaracingchannel412]

11.80 @ 119 trac day video please check it out ! kzbin.info/www/bejne/g5LRinWfltaGibM

[@possibleproblem479]

pffff slow af bro ahaha daddy says honda bad top fuel drag gud. but in all seriousness that things sick.

[@michianaracingchannel412]

Thank you wait tell you sell it come spring 2022 big 🐌

[@joshfackler7802]

What ecu/injectors/clutch?

[@michianaracingchannel412]

Josh Fackler hondata rc1200 but upgrading to 2200 fic and competition clutch stage 4

[@Fackler91]

@@michianaracingchannel412 thank you. What are you revving too?

[@michianaracingchannel412]

Fackler91 8k

[@el_coupe_belico702]

What transmission?

[@Javo24TV]

Stock block ?

[@michianaracingchannel412]

MAD xPxma- stock sleeves rods pistons cams

[@firellio070]

@@michianaracingchannel412 insane