4090 ITX Overkill - New Dan C4-SFX

Check prices on Amazon below
Noctua D12L: geni.us/T5L6yUs
NVIDIA RTX 4090: geni.us/xY6oY
AMD Ryzen 7800X3D: geni.us/DfRR7
AMD Ryzen 7950X3D: geni.us/BE58M=
ASUS ROG STRIX X670E-I: geni.us/qaXrU
Arctic P14 PWM: geni.us/5LrX5
Noctua Slim 140mm: geni.us/mg02AG
Dan C4-SFX: www.dan-cases....
Moddiy custom 12VHPWR: www.moddiy.com...
Is this the best new ITX case? I built an absolute monster inside it to find out.
need a new wallpaper? optimum.store/...
Video gear
Camera: geni.us/5YfMuy
Primary Lens: geni.us/pWnoPBr
/ optimum
/ optimumtechyt
/ only_optimum
As an Amazon Associate I earn from qualifying purchases.

[@farr1260]

I am so glad you're back to reviewing ITX cases it feels like its been awhile, love your stuff as always man! can't wait for more ITX stuff

[@MrLincoln87]

don't think there has been many new cases tho right? I think they all went on the back burner the second 3 slot gpu's became the norm

[@farr1260]

@@MrLincoln87 and with 3 slot GPUs manufacturers will adapt, there is loads of underrated microbrands out there and even hidden gems from aliexpress/taobao (Although i doubt Ali will review anymore aliexpress cases cause he said on stream that some of them never arrived.) Head on down to sff network and you can see builds on said less mainstream cases :)

[@maxhayden8634]

I just find ITX builds which turn out fitting so nicely to be so satisfying

[@hookyknife]

Well written and concise review. Thanks for keeping us up to date with the latest ITX releases

[@griefingcloud4391]

You're the best sff building content creator. Always inspired of your video, from content to editing skills.

[@Ka0Zltd]

Would like to check out some more SFX content creators, any recommendations?

[@velzun8075]

​@@Ka0ZltdSFF*

[@loutish315]

​@@Ka0Zltd Relaxing SFF and MXC Build (idk if thats spelled right)

[@jmeffendy]

If you enjoy PC build content, you should check out Mr. Matt Lee's channel.

[@duskparanormal]

@@Ka0Zltd GGF Events has some insanely clean SFF builds you may enjoy. He's the overall GOAT builder IMO and deserves 4x the recognition.

[@danielbrown3449]

7800x3d laughing at the 7950x3d right now

[@Knowledge0649]

Facts

[@ghost15214]

Crying with my 7950x3d😅

[@tadejpeckaj1151]

@@ghost15214 you can give it to me and stop crying 😂

[@parkersnipes6573]

Do you know the monitor he's using by any chance?

[@ahmadaburahma9756]

Yes but the 7959x3d is much much better as an all rounder cpu since the 7800x3d is only good for gaming and not much else

[@stayawayfromthoseoranges]

Hey I gotta say, you got me into this SFF PC biz and so far Im addicted. Swapped my O11 Dynamic for the NR200, super easy to build in. Convinced my friend to go with an all white NR200 build, gonna be mint. Thank you for your help in spreading the SFF knowledge!

[@humzatahir3038]

In the same boat here switched from my O11 mini to the SSUPD meshlicious no regrets at all

[@ChenChennesen]

very jealous when i see my partners nr200p next to my o11 air mini. crazy how much power you can fit in there.

[@BrunoRodrigoPintodaSilva]

Now, go to the next step and try to fit custom loop in your case. Man... it's not an easy task, but it's just damn satisfying. I'm stil trying to finish my Phanteks Shift, but that third radiator is "fighting" back. hahahah. Anyway, it just feels great to work with those SFF cases and the result is just awesome, clean and saves a lot of space.

[@perpetualprocrastinator]

Watching the SFF build process, utilizing every nook and cranny of the ITX case is always something very special but the cherry on top is fitting RTX 4090 inside and it's almost cathartic.

[@AzureNeptune998]

I like building in ITX cases because it's a lot easier to find a place for them in a cramped desk is this is the BEST channel for ITX cases. Thank you for another great vid!

[@bobbymoss6160]

You using the Arctic cooling fan in this case instead of some ridiculously overprice fan makes me so happy.

[@Jalopymedia]

Always the cleanest itx builds. Love it.

[@warmachine5835]

Slim fans on top of an FE card was something I noticed with the 3080FE--the fin arrangement is perfect for catching external airflow, and when I put slims in my Ncase M1 before water cooling the GPU, the difference was night and day on temperature.

[@asimovnicholas471]

the airflow of GPU is totally wrong. Hot air is going down.....

[@warmachine5835]

@@asimovnicholas471 convection doesn't matter when you have mechanical airflow. No amount of convention will overpower your intake/exhaust fans.

[@asimovnicholas471]

@@warmachine5835 Got it，Thanks.

[@ProTroy_]

Been missing your ITX videos, keep them coming!

[@Joeleon2]

I always love these ITX builds. I currently have an ITX build and I'm planning on using one again in my next build, glad to see the cases continuing to improve their design with aspects like the GPU vent.

[@js2529the]

Excellent quality work covering SFF, love the channel! You deserve all the subs

[@mostsaneperson]

can’t wait for the liquid cooled 4090 build! Great content as always!

[@chippunkcsgo1104]

Gimme Gimme Gimme. Im waiting for him to give me the input i need to build it myself :)

[@tongoso]

This is amazing, can't wait to see the comparison with NR200p max and A4!

[@Thunderbolt03]

That's very impressive, I didn't think you would be able to get such temps with that setup, really cool stuff, no pun intended

[@YossiElbaz-t3s]

Your video's help me with my ADHD and from time to time I check if you uploaded something new. This is just perfect every single time. Thank you 🙏

[@PaulHindt]

My last gaming rig was built in the DAN-A4-H20 based on your review. I highly recommend Dan cases now.

[@saydji]

King of ITX !! looks amazing

[@dreal2021]

No one puts out videos that i look forward to more. Another amazing one!

[@DenisJak]

Best KZbinr for competent and critical reviews. For me, same level as MKBHD but for cases, overclocking, gaming and lifestyle hardware. Thank you

[@thecayman8567]

You are going to hit 1M subs very fast! I promise) Love this channel

[@teekanne15]

Really appreciate, what you bring to the PC gaming community. Some people like modern sleek disgn and have outgrown the colorful rgb hotwheels look. It baffles me for years now how peripherals and general hardware isnt made to appeal to adults. Most of us that can afford high end gaming these days are people with jobs and family that don't want an eyseore.

[@nouryy]

That's it. You've convinced me to go itx. Gonna use the same case, cooler and PSU.

[@astrozsfe9672]

finally another maxed out build. the completely water cooled sff is still my fave

[@yourlocalhuman3526]

Bro your videos are unmatched man, I legit have to resist the urge to repost your stuff on my inst story

[@Outland9000]

I dont know why but I really like these dummy beefy ITX builds.

[@Sammysnows]

there is a feeling of satisfaction when you bring an ITX PC to your friend house and then they surprised your tiny PC have 10x the performance than your friend Console or PC

[@Drewstir68]

Babe wake up! New optimum tech video!

[@Ureroll]

Small factor and on air. Can't get any better than that. Sexy build gg

[@FynnR]

Nice review mate! You got me hooked on SFF PCs few month's ago and now I'm building my third setup in tiny cases: Meshlicious, RAW S1, NR200P and special mention A09 HTPC case (3.8L) office pc with Pico PSU and 5600G. I'm glad I own the 3070 FE though, no clearance issues so far!

[@federicoconforto9059]

the counter at the end of noise demostration... perfection.

[@kotztotz3530]

The P14 is an absolute beast for negative pressure use cases.

[@jonnymac86]

Dan knocked it out of the park here. i love inverted cases for itx.

[@eUzzy-]

Best tech KZbinr

[@svn5994]

Far from it. Inaccurate testing results and more worried about input latency than anything else.

[@nkuete]

still using the SF750?!?! that thing is just chugging along. I'm SO happy to see it can run the top tier equipment even 2 years after I bought it

[@HenryMartinez08]

babe wake up new optimum tech video just dropped

[@CookieSmilesYT]

LETS GOOOOOOOOOO

[@hrmanlarn2530]

Thank you for this video. My last ITX build was an thermal disaster.. This build is solid. I´ve copied your setup with the 7800x3d for VR Flightsim gaming. Works great. Looks great. I have one improvement: use the angled cable of Moddiy for the GPU. "ATX 3.0 PCIe 5.0 600W 8 Pin to Angled 12VHPWR"

[@Topper_Harley68]

Was wondering about that, is it angled up or down and what length did you buy?

[@knack6157]

Damn this is so good to watch.

[@modus_ponens]

The case (and review) we have been waiting for!

[@deltax7159]

drooling over this build. I cannot wait to build my first PC at the end of this summer. I will be using this as a reference build. I think starting with a 4090 might be a bit much for me seeing as its my first build, but thinking about a 4070. Will be using it for some gaming but primarily as a data science machine learning rig.

[@RdeanF]

This case is out of stock everywhere 👺

[@Tom-xj5yb]

bought a 4080super this year but still running the £30 atx case i bought off facebook marketplace 7 years ago! this vid got me interested in upgrading/downsizing mobo + case though.

[@Idtelos]

Definitely getting this case.

[@frankiev1785]

My next build right here!! Love this one thank you optimum.

[@JohnK26]

Another nice build, as always 👍🏻

[@nameresu]

Finally, air-cooled sff with no riser, capable of large coolers and smaller, than NR200. Please check fitting different air coolers, especially Thermalright PA120

[@arcsum]

if its taller than 145mm it wont fit SS135 does

[@Hokunin]

DanA4 is just getting bigger and bigger with every model :D

[@Tential1]

Wow.... That set up is exactly what I'd go for. I love noctua air cooling. I'm a fan boy

[@prodigy227]

Best compact setup ever!! Wow 🎉

[@rubenortiz6576]

We need this same build water cooled!! Great stuff!!

[@the_otd_arash2128]

Awesome as always ali great job 👌🏻👌🏻👌🏻

[@zeedamn2804]

I definitely need to see this watercooled

[@xITzLittleDudex]

These look stunning, I hope we will be able to get hold of them in the uk soon!

[@_Gray_Fox]

Great Video @Optimum Tech Wich length did you choose for the "Moddiy custom 12VHPWR"

[@solidoperative]

Love this build

[@BoostedBill96]

I love my Dan A4 H2O but damn this really takes the cake for compatibility

[@kosi2174]

Bruh this build can run better graphics than my eyes lol. Majestic job as always, truly art

[@shervingreen3918]

DAN Case H2O is just the best. 4090, 7800X3d with an aio. Sub 11L. Like it.

[@Wiisporter]

YOOOO HE UPLOADED

[@sebleaf8433]

This is really cool. I think now I know what I'll build for summer.

[@kaptennemo1043]

I love this guy, the pc so compact which is nice 👍

[@rifle]

I'm tempted to build something similar as my next build to upgrade from my current 2080ti system, but with potentially implementing Direct Die cooling, Ali has got me hooked on the SFF builds.

[@constantinosschinas4503]

At last a creator that knows how to setup and a manufacturer that have made it possible. Gpu shroud out and cpu direct intake are the one ways to do the job properly. In AIO the back would be the exhaust and AIO could blow inside.

[@phavixeysayavong2789]

Every pc you build is so damn sensational its insane.

[@Flaminq]

Your curtains match the “Founders Edition” graphics cards airflow vents perfectly

[@sebastianep]

This is my new case! Perhaps it would be interesting to compare D12L vs C14s in this case?

[@brafya]

the absolute godking of pc builds, none other like optimum

[@brokelatino2587]

nice "coming back" timer so I don't blow my ears out

[@fi5ke]

clean af

[@sjmiller609]

Air cooling is glorious and highly practical

[@avmail7097]

Is it just me or is this guy looking more and more buff?

[@vr4racer]

7800x3d Formd T1 looks to be the ultimate setup

[@oscarh.c.5539]

Gorgerous build

[@strider029]

It's not the ITX design that hooked me, it's the design that allows me to put the unit at my left side. So many cases are right handed.

[@buenomini]

Been waitin for this vid since we found out you got one

[@mildros]

This is what ive been looking for

[@TheLordstrider]

this is great, i will get one for next winter to keep my house warm. will save on heating bill in the process.

[@Garrett1974]

That SF750 takes it like a champ doesn't it? wow...

[@zolathirafi3247]

sick beefy build dude! and the PC looks fine

[@jeremyhaw7949]

He's done it again!

[@hman2875]

That case looks so good

[@GATOtyger]

Yes you can fit 4090 in the Ncase M1. Sent from my Ncase M1 4090 FE B650e-I 7900x3d c14S sf750.

[@sushimshah2896]

3:36-🧑🏻‍🍳😗🤌🏻 Felt like drifting through space with those tiny dust particles!

[@bas8732]

Really nice build, it looks amazing as well!

[@alexjakobsen7817]

Nice build. How long is the Moddiy custom 12VHPWR cable you have? is it Cable style. HD Single Sleeved ?

[@NguyenMinhDinh34]

Supper mini pc 😍

[@fattui]

Please go ahead with the nr200 comparison, that would be awesome!

[@Anti3D-0]

That's some spicy SOC voltage you got there

[@adamc6954]

What length moddiy cables would you get for this build? Great content as usual!

[@Shecomesfirst]

+1

[@Fidalgodev]

Can you tell us what length for the GPU cable?

[@fryguylol]

Very nice case, very decent temperatures 🌡

[@cortlan]

I wish I waited for this release! I ended up with an NR200, but this gives me buyers remorse

[@RodimusPrime29]

Lol was just thinking the same thing.

[@miguelcanilla]

Waiting for the benchmark between other ITX cases :)

[@Vykori]

god I love this video

[@hellowill]

Damn thinking an ITX build like this next. I'd mount it under the desk.

[@javiej]

Under the desk? be careful, you may end with 700watt of heat with nowhere to go, or even recirculating into the case...but yeah, it can feel nice during that winter

[@zosterinski]

That noctua would be nicer in black. Anyway, great presentation (as usual)

[@tomb6102]

Great Build! Love it...

[@itsdeonlol]

Cool SFX case!