4630 first fire ends with failure. also we put in the new cab kit! episode 9

[@SluSharkND]

Nice save on that one! Shitty way to learn, but there you go, learnt new stuff. And you shared it with a bunch of keyboard commandos watching. I am impressed, Sir.

[@centerslopefarms3347]

Glad you got that problem figured out, Love the winter projects!

[@jeffwarmka1507]

Yes you have to go through the top of the cad for the blower fan. Is not to bad. Love the videos. Good to see Sophia.

[@haroldfredd6978]

You guys do great work. I wish you were closer. Hopefully one of the new ones is a FORD. Keep up the good work.

[@straightpipeacres6365]

Lookin good guys!! I agree with Amanda, I like that tray

[@clydeschwartz2167]

Excellent video 👍👍👍👍I am sure that the snap is for the newer type transmission shaft. When they get the age they are it's usually more than likely that they get to be a mix of age of parts when stuff fails most people put in what is easy to find from a salvage yard that makes repairs a whole bunch of problems. The blower motor pack comes out of the top put in the upgraded one with 4 wires that uses a single switch not the failure prone tandem switch I have upgraded many 30 series and early 40 series John Deere tractors they use a resistor instead of splitting the power between the 2 blowers like the tandem switch does. I knew you had a problem when the white smoke started coming out of the breather I had that happen many years ago on a 671 Detroit diesel power unit I had to change flywheel for a different hand clutch and I thought I had the right flywheel until I went to start it and it seemed tight when it did start the smoke came rolling out i shut it down and let the bell housing bolts loose and it popped back about a quarter of a inch yet it went together nicely.

[@allanvaneste6039]

You got another 1086. Just couldn't live without one.

[@adam8347]

It would bring back many fond memories if one of your next project tractors is a 4620. The engine sound of a muffled 4620 working is awesome.

[@jrgenthomsen3841]

Thank you for sharing your video’s, and I am glad to see Sophia is doing okay she’s a great little girl, best wishes from Denmark 🇩🇰

[@waynegalvin4639]

I would never have figured that out! Kudos to you guys for figuring it out.

[@robertstratford9598]

Nick people think farmers just grow crops you ware many hats and I am great full for that great videos and I still learn some thing every once in a while love all your different projects wish I could be in there with you getting greasy too forget about the haters and key board warriors great videos thank you for many hours of enjoyment .

[@SouthSaskFarmer1]

Haha thanks buddy

[@charleshart6992]

Glad you sorted that issue - should be great when finished.

[@dlmarquart]

Good thing you caught the problem before you had issues

[@millerurbanhomesteading8632]

awesome builds..... thx for taking the time to explain thrust washer problem.... cool vids coming up....

[@thcenterprisellc112]

Great video ! I’m excited to see the 3 rescue tractors ! Keep up the great work !

[@stevehetrick2676]

Thanks for explaining what you figured the problem was , and the cause of the damage... Sometimes a guy runs across some weird shit ..

[@donmathias1705]

Well boys, you could throw you hands up in frustration but sometimes you just have to sit quietly over a couple of beers and nut out the problems. I know it was disappointing but in truth you should be well pleased you got it figured before you broke another block and filled that sump up with metal. hope you have more luck with your project tractors. Will be a good tractor again for a good number of years. Hats off to you boys.

[@jimbrown5143]

Hope you do that 2-105 White. I think I have permanent hearing loss from the hundreds of hours I spent pulling a 5 bottom Oliver plow as a kid. The turbo on that Perkins was a screamer. Great machine though. Heavy and stout. Good videos guys.

[@adrianmorrissey3248]

She is looking really good ,good job an the cab

[@generobben7290]

Amanda's repair bill is going to be pretty steep! Hope she has the funds.

[@750masseyman]

Thanks for sharing that tid bit of information. That could save a pile of trouble.

[@redbovine]

Seen that on big trucks. A mack uses a throwout bearing with a snap ring. An international uses one without. Same bearing just no snap ring. The people who built it before i looked at it did it wrong and it dang near screwed the crank out the front of the block. The trust bearing were also in the oil pan. Good looking tractor. Need one of those electric fridges in it if they make one that fits.

[@samrugtiv3839]

Well done sod buster some time things happen but it will all be ok we used to say at the dealer that I worked at if the cs don't run out of money we will get it fixed. Sam

[@oldfarmer4700]

Well hell yeah! Can't wait until I get to see the new old stuff. To bad about having this one all back together and finding out there was a problem. Still would have liked seeing one pissed off man cussing a little bit finding out you have to tear it back apart after some fresh paint on her. Lol

[@rickmckay3039]

That is a sweet looking machine it gives me the inspiration to do that to my 4630 which is my pride and joy

[@rickmckay3039]

Ps as a journeymen heavy duty mechanic always check your crank end play after sliding up to a transmission

[@SouthSaskFarmer1]

@@rickmckay3039 I know lol

[@irwinmccook7942]

Every day's a school day!! 4630 is looking good!!

[@heartwoodfarms9982]

Our 4440 has that same tray......handy for sure.

[@markjones3594]

Nick, you’ll need a big shop vacuum when you raise the cab lid, you’ll be able to reclaim enough good Saskatchewan topsoil to cover any barren hill top. Yes you have to take a metal lid off the roof to gain access to the blower motors 👍🏼

[@crazydave4455]

Frustrating as hell, had something similar happen to me last fall, but on a smaller scale. Awesome you figured it out 👍 can’t wait to see what you pull off the fence line, I have the same bad habit of bringing rescues home 😂

[@SKC640]

Man that sucks nothing worst then to find a nothing problem right on stay up but look at it this way stillest you found it now I'm the shop than it out I'm the feild,! Also how is the little one doing? I hope she is doing heal and hope her a fast recovery, there's nothing worse than it to happen to a little kid and I pray she will be able to heal mentally and will still be alright with dogs! For me the hardest part is to get them to be able to be back to normal around them especially since there's so many now days, imo that's the hardest part of the recovery is the mental aspect compared tke the physical side of it.

[@SouthSaskFarmer1]

She's totally fine now haha

[@brucehamilton2441]

Now thats farming one step forward and two steps back

[@rogercarrico4975]

Very fine detective work! Sounds like the input shaft from a earlier model is the culprit!

[@t.c.bowling1934]

Move your mirror to the inside and the orange flat knob is range. round is 1,2,3,4. Looks great! A lot of work!😃

[@GosselinFarmsEdGosselin]

The fun of working on something that someone else messed up on.... Anyone could have done it, even the best mechanic for the job could have missed it.. the only ones who know, are guys like you that just happened to notice 👍 Pretty cool that cab accessories are available for the older ones!!! Sophias eye, looking good!!! Happy kid!!!! New toys 😁👍 Looking forward to seeing what you drag home!

[@Murphyslawfarm]

I reckon Nick needs to put googly eyes on the front of the 4630 👀 😂🤣😂

[@GosselinFarmsEdGosselin]

@@Murphyslawfarm 👍😁🤣😂

[@Murphyslawfarm]

@@GosselinFarmsEdGosselin Googly eyes will ad sex appeal and 10 horse power because John Deere's need all the help they can 😂🤣😂

[@GosselinFarmsEdGosselin]

@@Murphyslawfarm 👍😁🥃🥃🍻

[@shaneholst6940]

Nice to know that for sure! Glad you guys figured that out before I got too expensive again. 🤬 Fan goes in from the top . Sound gard cab's are basically the same

[@jamesbuck3818]

JEEEZ! Sounds like my "85 F350 6.9 IDI / NOW 7.3 IDI.. 😮

[@conradward2945]

storage tray...thrust washer's springs to mind!..or snap ring! crackin job

[@martinbenton742]

Dam the luck! I told Penn it sounded tight and the starter was diving off after a short crank. But, I would have ran it too. Sure looks nice though. Doc

[@jonstevensmaplegrovefarms3754]

ugh that sucks. glad you found it!

[@joesfarmingshenanigans908]

Literally my dream tractor for ever

[@69druth]

Looks good.

[@wymple09]

Every time I see one of these videos I thank my lucky butt for my old AC200. 14 years now with nothing but an alternator.

[@jeremycherny2041]

Glad you gotter figured! Worst is having those problems on customer units🤦‍♂️

[@FaithiinJesus]

Yep I had the same problem with my Mercedes Benz

[@wellgeo03]

I have a good first start video of our 4430 you would get a kick out of. It’s a combine 466 that I converted, but when we started it the rack in the pump was stuck at WFO! Needless to say she took right off!

[@bradbaynham5368]

We're not going anywhere. Troubles everywhere, carry on

[@keltonwright7]

Hopefully you got that 820 you've been looking for.....

[@koryswyo]

Looks good

[@reimerdairy7080]

It was a very exciting video we all learned something

[@dalewalker4008]

I always figured you really had a soft spot for IH 1086's. I know cuss em but you just had to have one again.

[@tiger5551]

*As nick would say: “well piss!”* Oh boy new tractors!

[@johnviney7919]

Glad you have things sorted Nick?!?! Pain in the kiester to take things part several times, but no destruction at least!!!

[@crslyrn]

That's aggravating when the manufacturer does those design changes & don't document it very well. 😠 Glad you guys caught it before the "Cattle Barronness" took to doing the chores with it. Hope that fixed it. 👍🏻👍🏻🍻🍻 Looking forward to seeing what the new toys are you're going to get. 🤔🍻🍻🍻

[@kyleburton4825]

She’s lookin good!

[@jdtractorman7445]

A trick my vocational instructor showed me once was to use a dial torque wrench and spin the crankshaft when installing main or rod caps after torqueing them down. That way you would know if one was too loose or too tight clearance wise. Of course what happened with you guys here was before the fact. It sucks to have to work on something that has been worked on previously by someone else. I used to work in the car business as a tech so trust me I know, LOL.

[@farmark457]

Well at least you will never have that happen again. I’m sure you’ll check everyone you reassemble from now on. Good job

[@randydutka9302]

I remember u having trouble getting tractor back together the last inch would that be the snap ring holding it up

[@Murphyslawfarm]

G'day Nick and family

[@AlbertaRanch]

More 1086's coming!!!! Hurray!!!

[@SouthSaskFarmer1]

Nope lol

[@omegaseamaster1550]

@@SouthSaskFarmer1 Prolly a New Holland ;)

[@SouthSaskFarmer1]

@@omegaseamaster1550 nope lol

[@omegaseamaster1550]

@@SouthSaskFarmer1 I know, just trolling ;) Keep up the Great Work on the channel.

[@dklarsen1705]

Great job figuring out the problem. I’d say someone swapped out the input shaft at some point. I’ve heard of this before.

[@Digginok]

When I worked for a Deere dealership I rebuilt a 2950, started it and smoked the thrust bearing. Turned out I had the clutch plate in backwards, boy I felt like an idiot.

[@jackfrost1460]

Hi Nic 🙋🏻‍♂️ Great video sorry about ur tractor troubles! Glad to c Sophia is doing good ! So did it cost u anything but time to get ur tractor fixed?

[@MarJLat]

thats gonna be one sassy pants jiohnny popper when its all done!

[@williamanderson8441]

Hopefully one is a Case Magnum 7250 👍

[@Paul-vd2sp]

Yes new old tractors - everyone loves them !!! 3 is even better!!!! I.m guessing at the 4020 in the hedge on the farmyard you were making hay on. An Oliver and a Mini Moline???

[@davidwallace388]

Where did you get that work tray from, A and I? Tractor looks very well done, ready to go another 30 years!

[@SouthSaskFarmer1]

Can only get it from deere

[@markissboi3583]

How to fumigate a building 🚜💨💨 no bugs live ere! ( just as you got to the Snapring part ) the Next door starts a loud plainer /sander up

[@SouthSaskFarmer1]

Lol

[@brentanderson8147]

You got that 40 20 that was sitting at that farm where you had the power line fire

[@pistonringfarms8107]

U bought marlins 4520, a 7020 4wd or 7520 4wd and a 875 versatile. Also did you order that cab tray thing from jd or aftermarket? And or you bought the 5020 and 5010 from kijiji.

[@deanlarsen1389]

Blowers have to be taken out from the top of the roof. remove 4 screws under the eve over the front window and the two bolts on top 15/16ths lift from front and use the support bar.

[@mackenziebaker4406]

Jeezus when it rains it poors eh get that dirty Deere running for all of us to enjoy

[@pauls4460]

Ok, I'll be back for the restoration videos, but you gotta tell Magnum to let somebody else talk some times too.

[@nickhill3362]

Great Idea for a storage shelf were did you buy it Nick 👍

[@SouthSaskFarmer1]

John deere

[@rileyensor7938]

I hope it’s a big bud :)

[@waggtech8793]

Well fuck all! Someone pulled the firing pin!

[@Northern_Farmer]

Ah shit.. I know how that feels when your filming and something goes wrong....

[@s60430470]

Nice video! I'm guessing an Allis Chalmers 8030,White 2-150 Field Boss and perhaps a, hmm... 4440 JD...

[@SouthSaskFarmer1]

Uncanny

[@parttimefarmer2537]

I do everything three times so I know the feeling just ask my wife!!!

[@kevinveile6717]

I'm guessing one is that 4020 from the yard you cut for hay.

[@PaulHigginbothamSr]

Tis the Oliver 66 FINALLY

[@PaulHigginbothamSr]

I just hope leaving out that snap ring will go for 30 years

[@piperdoug428]

Welcome to.......EXTREME TRACTOR MAKE-OVER....with your hosts Nick and Antwon.....with guest appearances by Tireman Robb aaaaaaand ....Captain knowledge himself.....IVAN THE "YEAH IV'E DONE THAT" GUY........

[@SouthSaskFarmer1]

Lol

[@Calami7y_72]

The KZbin money must be rolling in if you bought three more tractors lol

[@FUBAR666]

well a learning curve , everydays a school day , knowledge for the future , which i guess you are going to need with the Blue thing ?? ....

[@andrewstich7117]

Very good video thanks for your time and effort to do the video

[@jakeweinand7939]

The blowers are pretty easy from the top side

[@tomcleghorn4005]

He bought an ih just like grampas cause he loves it soooooo much!!

[@ruralprepper860]

I'm fairly new to this channel, but I see a Ford in the near future. 9n.?

[@SouthSaskFarmer1]

Nope lol maybe one day though haha

[@johnhyde111]

Love your videos what brand of cab kit do you use

[@nathanburgess4928]

👍just a little pissed off...insert every name in the book

[@KW-qt6df]

Very nice. It is the little things in life that bite you in the ass

[@rodyoutsey8786]

Could it be a low hour 1086? We all know how much you love them. Lol

[@randyrobinson8751]

Mystery tractors, i like

[@FarmerJo306]

I certainly wouldn't have taken things that well edited or not haha Above all I have no clue how you manage to film all this and then have keyboard warriors give there two bits about every little *ucking thing unreal haha Kudos to you and keep up the good work!!

[@SouthSaskFarmer1]

Haha if they piss me off they get the boot lol

[@FarmerJo306]

The interweb and it's social media allows the experts to spill a little to much stupid for this old boy but getting to document your lifes work would be pretty slick to be able to look back on one day! Thanks for the entertainment and the tid bits of knowledge I catch here n' there is deadly! Here before autosteer, Farmer 306

[@SouthSaskFarmer1]

@@FarmerJo306 haha ye exactly

[@TinManKustoms]

My guess would be you got either Cockshutt, Oliver or Massey and probably found a twin John Deere to the one out in the yard your working on for another guy

[@BooherFarm]

My guess is a 830 diesel 😉

[@doughboy1966]

I bet the audio content would not be correct for KZbin after you found that thrust bearing in the pan. I’d of been livid mad too.

[@SouthSaskFarmer1]

Lol yuuuuup

[@adrianchetwynd1334]

@@SouthSaskFarmer1 This video looks to be 100% CGI to me but what is the motive? I would bet that you have never witnessed such BS weather in real life in Canada: kzbin.info/www/bejne/Y3aVY6KCiqxgas0 MM= 33 = the CGI farmer? You decide... ..

[@adrianchetwynd1334]

@@SouthSaskFarmer1 Record it before its taken down

[@adrianchetwynd1334]

I suspect that Mikes farm is financed by a farm simulator business, and that Mike was chosen as the real life actor. It doesn't snow like that anywhere including in Canada.

[@adrianchetwynd1334]

@@SouthSaskFarmer1 Have you watched Welker Farms latest video? It looked very different to the usual format but why? And why are they selling their grain so soon?

[@kolewiebensohn]

Time to get a 7810 mfwd powershift and you'll be happy lol, you'd be better off with a 83-8400 mfwd with the bigger cab than the 7000 series

[@troyskeese1503]

Great another 1086 !

[@mikenicholson2548]

Nice!!!!!!!!!!!!!!!!!!!!

[@johnhenderson6772]

You gotta paint the roof man come on!🤪