48RE VALVE BODY BUILD WITH SHIFT KIT ( same as 46re )

www.coperacing...

[@xjarhead1964]

You may never see this. I grew up in Merrillville. Before I went into the Marine Corps in 1985 you put a shift kit in a friend's car. It was a 1978 Olds Cutlass GMO. We had so much fun in that car. You do great work. He could chirp the tires in every gear. Thank you for doing these videos, brings back a lot of fun memories.

[@UnfinishedProjectDartSport]

🥔

[@N.A.J.]

John, thank you. Just thank you. A large number of professional transmission builders in the industry will be watching this to learn a trick or two from you, the well seasoned valve body builder.

[@coperacingtrans]

Your welcome, thanks for watching

[@N.A.J.]

Will you test this valve body before installing in the customers truck? Or not worth it on such a basic build?

[@coperacingtrans]

@@N.A.J. It's in the truck and down the road. It worked great

[@Chevy-f4l]

​@@coperacingtransI have a 46re that won't shift only has 1 and reverse?? I have did pressure test and they were all in spec governor pressure is on point could you give me some guidance

[@coperacingtrans]

@@Chevy-f4l call the shop after 5

[@bigmurph1447]

I rebuild 47 and 48 in diesels as a hobby side job after work. You just showed me some new things to do to the valvebodies. I started using the new updated transgo pro shift kit little more money but has alot new updates.

[@joshuaducworth210]

@bigmurph1447 how do you like the PRO kits?

[@bigmurph1447]

@@joshuaducworth210 they work good I have used a bunch of them

[@Vip89_B]

On the od valve unit the metal lug that goes over the spring ( covered w/metal pl). Well that spring is the same size as the neighbor valve spring. I got them mixxed up. One is red/ lighter and one is black /thighter. Which one goes where? Also torx bolts what are the torque on them? Thanks a bunch!

[@TheProchargedmopar]

This channel really needs to Blow up. Great Info. Thanks. 👍💪

[@FoxtrotGear]

Do you recommend the Transgo over one of the Sonnax kits? Looking to upgrade mine but not 100% sure what direction to head.

[@79asspin]

Mumbly peg, that always cracked me up. Good show, thanks John. 👍👍👍

[@luismartinsuarez2905]

Awesome video. This mods can be done in a 44re a500 too? Thank you for share your knowledge

[@coperacingtrans]

Yes

[@sciglassblower]

I appreciate your knowledge. I do disagree with the rounding off of the Rooster. I put my TransGo kit in and thought about it. I did not and am glad I did not. My Trans would not hardly come out of Park prior, really worn ball hole. After, my trans comes out of Park so Easy that I would have been sorry if I messed with it. It almost falls out of park lol. No my Bullet was not loose, it fit perfectly in the hole and had no movement but works great.

[@rayowens4355]

I know this is an old video. Still i hope you see this. What is the purpose of the check ball you leave in for four wheel drive and take out for two? 49:17. Thanks in advance.

[@440phoenix]

A true Master at work. Thanks John 👍

[@coperacingtrans]

No prob, thanks for watching

[@hotasphalt7777]

Ahhh.....the Lonely Bull again! Sounds like a great name for a race truck!😄

[@elroyelblander6277]

👍👍thank you for another video Mr Cope👍👊

[@coperacingtrans]

Your very welcome, thank you for watching

[@jimkillen1065]

Thanks for the video and the advice ..I only know what I been told . Harsh shifts can break parts and does little good if you don't have the line pressure to hold the clutch packs . I was told it's better to have firm shift and then enough oil pressure to hold the clutches..

[@moparnut6286]

Great video John love learning from you.

[@coperacingtrans]

Well at least someone is listening to me. Thanks for watching

[@moparnut6286]

@@coperacingtrans lol!

[@FoxtrotGear]

Where do you get the plates and screws from? I can't find them online anywhere.

[@joeschleprock3409]

Great vid. I have a 46re and the trouble code tells me the trans oil pressure is too high.Could an issue with the valve body cause this? thank you

[@coperacingtrans]

Governor sensor & solenoid

[@Scarlet_1971_cuda]

Right here is some much needed information. Thank you!!!

[@Russeljfinch]

Thanks Mr Cope 👌

[@LifeSavingDefense]

What do you think of changing the harness and using the old metal round governor pressure sensor/thermistor/temperature sensor on the newer transmissions? 2003 46re 4x4 offroad Moderately hard use in past but basically just a street truck now. Very nice detailed video and I know if I report a trans or Val body and it has gold plates that it's worth Pulling BTW for those who have never done it if you remove the accumulator before taking the valve body out a screw will hold the plug & large spring in place till your ready to remove it but that little one will fly the wind if you're not ready... 😂 If you're really not ready and doing this under a truck you may lose the springs and plug. Fortunately I didn't

[@terrygrover6440]

Hey John that's a good video thanks for posting

[@coperacingtrans]

Glad you liked it. Thanks for watching

[@ScottKrauss-n8z]

I have never even thought of doing something like this so i googled it like most. I watched the entire video i couldn't stop. He is really good at what he does and explains things so very well. Because it is so second nature for him he multitasks the whole time i love it. In conclusion this is a great video and you could completely use this to do the work. And although i think i could probably pull it off with time and organization but there are some things i just gotta pay a pro to do lol.

[@richurban659]

Wat does it run for a 2002 46re 4x4 dodge ram1500 5.9l Valve body rebuild with ur mods

[@asmiruskovic2489]

I have a problem can you help me please. When I put transmission in reverse engine stop running. Thank you

[@coperacingtrans]

what transmission do you have? Does it have a lock up torque converter

[@asmiruskovic2489]

@@coperacingtrans 48RE

[@asmiruskovic2489]

@@coperacingtrans in drive shift fine but in reverse engine stop running

[@coperacingtrans]

@@asmiruskovic2489 can be a cool flow problem. Take it in for service

[@asmiruskovic2489]

@@coperacingtrans my plan was to be like you one day soI have servised by my self. Everything new but still same problem. what is the cool flow

[@TheViewFromMyOffice]

How do I find information for you to rebuild my valve body?

[@coperacingtrans]

www.CopeRacingTrans.com

[@ggf_juannnn7536]

I left my 3rd gear check ball out and instead of making it a crisper shift I lost 3rd gear:( I also put the dnj component!

[@motovick]

Thank you for your awesome video's John! I have a few questions. When rebuilding this valve body, do you recomend to systematically install a new O.D. solenoid even if the original is still working? If so, which brand do you recomend? The second question is about the calibrated springs that are not being replaced by a shift kit, are they fading over time and if so is there a replacement kit available for them? Finally, in addition to the rooster come detent kit, Transgo offers a couples of other repair kits, including a new O.D. spring. They are not that expensive so I was thinking to order them all, what is your opinion on that? Cheers!

[@JCSDieselPerformance]

No vacuum testing.... 🤨

[@seanbroussard2160]

What do you charge for a 46re full rebuild upgrade to hold around 700 hp

[@samuellopez582]

Nice to know I’ve been wasting money on shift kits all this time! 🤣

[@coperacingtrans]

Shift kits are still the best way to get the parts you need to reprogram the valve body. Thanks for watching