DIY Push Button Start Ignition Switch Wiring (For Beginners)

[@WiringRescue]

Thank You for Watching the Push Button Start Switch Wiring Video! Subscribe To This KZbin Channel: kzbin.info See My Wiring Playlist: ​kzbin.info/aero/PLsF7T1tRFy2hmiiUUfMZNyV-BUA_yrPIh

[@wolfcrossing5992]

I'm not sure who has more energy; Jeremy or the battery that's used to power the circuit? Either way, he does a great job with these videos, while entertaining as he's explaining.

[@WiringRescue]

@@wolfcrossing5992 - lol! Thank you! Just trying to make learning seem fun! Thank you for taking the time to watch!

[@Nadimarco90]

You created a monster I’m rewiringmy whole interior chassis with your videos thankyou so much

[@WiringRescue]

Yes! My master plan is all coming together perfectly! Bwahahaha. (Seriously though - thanks for watching!)

[@mojazz4urazz]

This is the best video I have ever seen. I am an old guy who just hate wiring, but watching this made my whole world better because i still tinker with things. If you're not a school teacher, you should be! Keep up the good work.

[@WiringRescue]

Wow, that means a lot to me, thanks for the kind words! And if you find yourself bored - check out my other wiring videos!

[@jadevanschalkwyk9331]

I’ve always thought that doing automotive wiring was a complete pain especially because I’m still new at it but this is by far the easiest way to learn thanks for the great content

[@WiringRescue]

That’s fantastic! I’m so glad that you found the wiring videos helpful!

[@dr.arindamsarkar5321]

@@WiringRescueur a great teacher

[@PBJAuto]

Hard part is making it all pretty in the car now

[@tedbear8168]

The only thing I struggle with with a lot of these videos is the anti theft systems.. I have my key and my PATS is fine, when I wire an ACC switch to my mustang it turns on all acc emulating the key being switched on, But when I go to crank the theft light just flashes and I have the key with the transponder and the correct ECU. When I used the keyed ignition switch it’ll start right up… when I wire in a rocker panel and switches it just will not WILL NOT work…

[@Rick-Williams59]

I'm old and I've been using this type system for more years than I care to think about, but there's something about watching your videos that just fascinates me, maybe it's like a refresher course or memories of days gone, (I still work and still love automotive wiring). LOL. Keep doing what you do, and I'll keep watching. Thanks

[@WiringRescue]

That’s extremely kind! Thank you for sharing that! I appreciate you taking the time to watch. I’ll keep making them!

[@Yemeneez]

I like the disclaimer. I also know you teach better than any other teacher i have “learned” from. Clear and simple no homework or high tuition fees.

[@WiringRescue]

Heck yes! Thank you! I make these videos in the way that I would like to learn. Glad to hear others like it!!

[@Django_Unsupervised]

This is hands down the most clear and concise video I could find on wiring relays. My KZ1000p breathes new life from this video

[@WiringRescue]

That’s fantastic! I’ve got lots of relay related videos if you find yourself bored today and are desperately wanting more! :D Congrats on getting your KZ working again!

[@dougbasch2040]

I have a 1973 Chevy Nova (race car but street legal) and had a wiring nightmare today, thought I fixed it and went for a joy ride, only to have it stall on the highway 😮 After watching this video, I know how I'm gonna tackle this situation in the morning!! Thank you, very precise and easy to understand with your board presentation, so thank you!!

[@WiringRescue]

I’m glad the video is helping a Nova because I love them and have about a million hours invested into my friend’s 72! Good luck with your repair, and thanks so much for watching!

[@milner1]

Hit like before the video started lol. I love these videos, makes it easy to understand wiring!

[@WiringRescue]

Lol! Thank you! It’s greatly appreciated! If I keep at this, someday the whole world will love 12v wiring!

[@christiansteward695]

Literally jus did this then went to the comments I’ll be damned if it’s the first one

[@WiringRescue]

@@christiansteward695 - thank you! It’s greatly appreciated. I’m so glad to see all of my wiring videos being watched! It’s excellent!

[@rubberduckyTJ]

boosting that algorithm. well done video. good info, easily digested, thank you!

[@WiringRescue]

Hell yeah! 😂 I’ll take any boosting I can get! Thanks for watching!

[@rubberduckyTJ]

@@WiringRescue Do you have an IG?

[@operatorfig]

I cannot tell you how much i appreciate your videos. This helped so much.

[@WiringRescue]

That’s awesome! Thank you so much for watching and sharing that! I really appreciate it!

[@JasperCLoren]

Your videos really help and make a positive difference in my life.

[@WiringRescue]

That is fantastic! Thank you so much for sharing that with me!

[@davea5577]

Love your channel. I did notice when I went to wire a relay bought off amazon the numbers and the colors were not the same. But your explanation of the numbers helped me figure it out!

[@maxbranvall]

Wow this made not only the wiring of this specific circuit, but the basics of electronics super clear. Thanks so much!!

[@WiringRescue]

Glad you enjoyed it! If you have some time - check out my other wiring videos. Here is my personal favorite - kzbin.info/www/bejne/j6ucnKSujNCifqssi=CNrzrjR7BeHUt6Dt

[@cam3002]

Yet another great video full of helpful content. An idea for a future video, build a low fuel light using a NTC Thermister. Those of use running fuel cells still need a low fuel warning light where stock style gas gauges don't work.

[@Mudbaby22]

Subscribed. This channel is going to save me hours of research. You have no idea lol Thank you!

[@WiringRescue]

Thank you! I’m so happy that people enjoy these videos. Thanks for watching and good luck with your project!

[@Clelliiott]

Thank you! Wiring has always been my least favorite part of working on cars. I've traced wiring diagrams and blindly connected things -often with disastrous results. Now I have a pretty good understanding how these circuits work and how to safely put them together. Very well done.

[@WiringRescue]

I’m really glad the videos helped you make sense of the wiring! If you liked this, I have many more wiring videos you may also enjoy! Thanks for watching!

[@jimwelds077]

Keep doing what you’re doing man. Helping me for sure. Thanks 🙏

[@WiringRescue]

Absolutely will do!

[@martinduwors8632]

Hi - just want to send a sincere thanks for this video; it was a huge help in setting up my engine run stand. So, yeah, thanks!

[@WiringRescue]

Heck yeah! I’m glad it helped you out!

[@natasunknow240]

Man u make it seem simple then I get out to the car & I'm completely lost.. I wish I lived in your town I'd have to pay to wire up my car! Lol

[@WiringRescue]

Bring the video with you ! Haha thank you for watching!

[@Fannerkeith]

Please do more such videos, since watching your videos I have learned a lot ❤

[@WiringRescue]

That’s excellent! Thank you so much for watching. More on the way!

[@MPAPILOS]

Το καλύτερο βίντεο που έχω δεί!!!!!!

[@powerwam024]

Dude I don't have to tell you again but your amazing. Your the dad I never had lol

[@WiringRescue]

I’m trying my best out here! Thanks for watching! I really appreciate each view these videos get!

[@troycombs1600]

Best teacher ever

[@WiringRescue]

Thank you! I really appreciate it!

[@ClarksPlace]

Great vid, got this same switch system and couldn't make heads or tails of the instructions! Thank you! Engine Run Stand is gonna get done this weekend!

[@WiringRescue]

I’m excited for you! Good luck with it!

[@ronaldtracy2534]

I love this video I was working on putting this on my go cart. And was going to just leave it push button but I wanted to add a key on and off So nobody could steal the go-kart and now I know how thanks. I also subscribe.

[@johnmckee7937]

I think you do an excellent job of explaining in non-technical manner. Something of lot familiar with wiring can't or won't do. Suggestion for future wiring, keyless?

[@WiringRescue]

Thanks for the kind words! When you say “keyless”, do you mean using a key fob to unlock doors and perform other functions? Or converting a car to no longer use a key?

[@johnmckee7937]

@@WiringRescue key fob wireless.

[@JackMeadows6322]

Your videos are always awesome, keep up the good work!

[@WiringRescue]

Thank you! I appreciate it!

[@TaThach72]

Thank you so much for putting this video together.

[@WiringRescue]

You’re very welcome! I’m glad you found it helpful! Good luck with your project!

[@putraadriansyah8082]

I add a "debugging mode" panel under the hood to bypass and take control of ignition, ecu and starter. Because I work on my car in a tight garage, going back and forth just to start the engine is not efficient for me. So I add a remote panel to turn on my car from the engine bay. I also add a NC switch so when I close the hood my circuit gives control back to key ignition switch

[@probo11]

Your a Genius! Youe videos help me so much, thank you good sir!!

[@rustedhorsepower5132]

I "relay" liked the video, 😂. Relays are a game changer when doing custom wiring AND understanding them makes diagnosing EASY. Great job man!

[@northtech9762]

Great source of information. I have added three 12v lights to the race switches . coil/oil and fuel pump . I added a relay with a fuel pump. For some reason I am getting power to the small 12 lights, When I turn the fuel pump on the light goes out, I know it difficult to recommend a fix, but adding the relay to the switch does it have to be wired differently, thanks for the trips and Trix .

[@WiringRescue]

It sounds to me like you unintentionally wired the fuel pump switch through the bulb circuit of the switch instead of the accessory circuit. If your fuel pump switch has three terminals, two of them probably need to be swapped. If that is not the case, maybe your fuel pump relay (pin 30) is getting power from the same power source as the switches, and essentially sucking that power source dry. Check out my fuel pump wiring video to make sure you wired that relay correctly, straight off the battery. Good luck!

[@northtech9762]

@@WiringRescue thanks . Its now good to go, thanks for the reply . I have learn lots for you channel. cheers .

[@whitebreadddd]

This knowledge is gold, thanks man 🔥

[@patricklandon8399]

Ur videos are BASED. so easy to digest. Tysm

[@LawlessOffroadAdventures]

Your channel is Now my wiring school 😅 I just received two of the same Nilight switches, had some second guessing to what was there, no instructions, just a QR code 😅. I need a map, screen shoots of your videos (thanks, sorry😅). Really help my brain.l, And it's in color 👌 still need to watch 10x though

[@Ventry69234]

Very complete video, awesome!

[@WiringRescue]

Thank you! I'm glad you enjoyed it!

[@Peugeot_20v_GTTI]

So simple and explained very well these videos are helping me wire up my track car great content

[@jamesquinnie7573]

I love these videos!!!! Please keep them coming ❤👍🏻💪👏👌💯

[@WiringRescue]

Absolutely will do! Thanks for watching!

[@davidpeek7741]

Very nicely done 👍✅😊

[@WiringRescue]

Thank you! I’m glad you liked it!

[@monkeyshop7574]

im so glad i found this channel. your videos helped me out soo much 🙏

[@johnnymula2305]

Awesome videos! Your videos has taught me how to confidently wire vehicles from scratch. Plus its helped me in troubleshooting as well. Have you considered showing a video on wiring up a coil, distributor and an MSD system to a carbureted and efi motors? I checked your library and havent seen it if its there. Hopefully its something you may consider. Thanks again!

[@l.r.c7962]

Have you tried wiring it up on a carburetor car

[@Askthequestions]

Thank you that helped me in so many ways. I'm wiring a two thousand five point three engine into a nineteen sixty six chevy c ten

[@t4039ts]

I have the big shut off switch in the back of my race car. I have a painless wiring switchboard with eight switches. Those wires will go to a relay board and from the relay board to all the labeled items where do I go from that point

[@WiringRescue]

Check out this video kzbin.info/www/bejne/j6ucnKSujNCifqssi=4yWx7BPEBpNDUzs9, it may help make sense of the big shut off switch.

[@madmike8406]

Great video, well all of your wiring videos are great. I wish you would do one on using universal wiring harness because that’s what I get questions on. It’s nice to just link your videos.

[@WiringRescue]

I’ll get there eventually! Thanks for watching!

[@MultiExtremex]

Man, you are the best!

[@WiringRescue]

😂 Thanks! Tell all your friends!!

[@macd6351]

Thank you. I want to wire my offroad truck and need wire diagrams to wire push button start and I want to use a fuse buss and relays.

[@nichgraham]

This is amazing thank you for the explanation. So much detail. Thank you it's going to help me wire a push button start for my track bike

[@jimwelds077]

Jeremy. How about this same set up but running fans? I watched your fan video but basically replacing the key switch for this push button style.

[@savage9scorpio]

This video helped me a lot today

[@WiringRescue]

Excellent! I’m happy to hear that. Thank you for watching and good luck with your project!

[@savage9scorpio]

@WiringRescue i appreciate you again. My project is going well. Not sure if I should run my fuel pump off a fuse or relay tho. The fuse has been working is the relay better?

[@SpencersAutoParts]

Quick question, the main wire with the fuse, you placed a 20 amp fuse at the beggining before adding the fuel pump. Once you added the pump you switched it to a 5 amp fuse. Why did you do that? 2nd question, would you have to repeat the relay process like the fuel pump if you add another higher amp item like lets say the window motor? Enjoying the videos and learning a lot, wish I found them earlier. Thank you.

[@oldschool6268]

Dude I have a brother who is super wire tech and installer, he has never explained it this simple. So even though you push the red button to start, you haft turn your ignition key off to kill the motor right ? Thank you so much. much.

[@WiringRescue]

It all sort of depends how you wire the engine, but generally speaking, yes, you would turn off power to the the ignition system some way.

[@h8ag]

Thank you for sharing your knowledge master. 🙏🙏🙏

[@robsonbarbosadeoliveira5167]

Good morning! Congratulations on the video. I live in Brazil, and I liked what you showed in this video. What is the name of that tool you used to start the starter motor? If possible, can you explain its connection to the starter motor? Thank you very much for sharing your video.

[@WiringRescue]

I actually created a video all about starter wiring, which you can watch here kzbin.info/www/bejne/pomTdWWAiLB7nZo

[@jacobchandler7953]

THese are always great videos! thanks for sharing.

[@WiringRescue]

Absolutely! I’m glad that so many people like them!

[@dobbyrepairs]

Awesome video. Everything is explained, really clearly 👍

[@vinataba22]

Hi, thank you for your help. One Question tho: I am trying to install this starting system on my Lawntractor. But I don’t see how I could shut off the engine is there is no ground to the on/off switch. Could I just run the ground from the engine to the switch? Or run a ground from the relay at the starter back to the switch? And I am wondering weather the battery would be charged from the engine? I have to wires coming out of the starter / relay (black and red) these are the only wires that are on the engine. So i guess with these wires I should be able to start, stop and charge? Thank you so much… with you video I see hope that my project could be successful in the end 😅

[@juanchopping1]

excelente video, muchas gracias saludos desde Chile

[@WiringRescue]

Thank you! I appreciate you watching the videos!

[@johannsnorri8781]

So easy to understand!

[@WiringRescue]

Excellent! That was my hope!

[@tloder]

Is it possible to add a light to the fuel pump switch/relay to show that it is on? I have a similar setup on my race car and the switch works to turn on the relay but won't light up the LED. Great simple videos. I will be subscribing.

[@NickAtsidas]

Sir you are the best. Your videos is magnificent...

[@WiringRescue]

Thank you! Be sure to tell your friends ! Lol

[@NickAtsidas]

@@WiringRescue Of course I will do xD

[@WiringRescue]

@@NickAtsidas - Yessssss! Thank you!

[@robpowrie1226]

Love all your wiring videos and they've been very helpful in my Jeep build. I do have one question though... with the push button wired as is in this video, will it also shut the engine off when pressed?

[@WiringRescue]

Nope, this method of wiring the button would only start it up. You’d have to create a separate shut-off switch to turns off your ignition system.

[@robpowrie1226]

@@WiringRescue Thanks for the reply, I see. I saw your alternator battery switch fuse box video as well and may end up going off of that method to shut things off. Thanks again!

[@RYDENROAM72]

Thanks for the great tip. I don’t have a race car/truck but I had to break my ignition switch due to I lost my key. No parts store or dealership has my part. I have an 85 Isuzu pup and looking for a way to redo my whole ignition system. This is a great way thank you. But I noticed that the system your using states for racing only?? But can you use it for just an everyday driving car?? What is the difference if there is any?? Thanks?? Again thank you for this great video, easy instructions and tutorial on how to wire one of these and also the relay.

[@briansanchez1060]

Great video, to the point and informative! Thank you

[@cwc5531]

Great video, very helpful Thanks

[@WiringRescue]

Thank you for watching! I appreciate you taking the time to do so!

[@Marti-dw9xt]

Great,,,, and what do u do with the key barrel wires

[@germanbanuelos4036]

Really good explanation.....

[@WiringRescue]

Thank you! I appreciate that!

[@grannylow7073]

Great video very informative and helpful 👍, I was wondering if you could make a video explaining and showing how to wire an electric Volvo power steering pump. There are some videos out there but I just love and understand how you explain the process. Thank you for sharing your knowledge.

[@mustaphabenbekri]

i love you man Keep up the great work

[@sdsturges2464]

great video explained perfectly

[@Tuner9069]

Wouldn't the fuel pump kick on when you put the key in the "on" position (in a stock vehicle)? If so how do you wire in a relay to the on position switch?

[@WiringRescue]

It depends on the car. Some fuel pumps run for about 3 seconds when the key is turned on and then stop unless the engine starts. Other fuel pumps only turn on when the engine is rotating. So to wires yours, you would need to probably do what the fuel injection system is requiring. That varies depending on the type of vehicle.

[@Cesar-so5no]

Not a beginner but this is definitely a good example

[@WiringRescue]

Thank you! I’m glad to hear that you found it to be a good example!

[@jackboling1675]

Thank you for all the videos

[@WiringRescue]

You are very welcome! I'm glad that people enjoy them!

[@robertdeblasio-qo1yf]

HOW DO i ADD A msd BOX ONTO THIS SYSTEM, WHICH i DOING IN MY RACE CAR WITH NO kEY SWITCH ? GREAT VIDEO BY THE WAY

[@angry_demonn5919]

so theoretically if you wired the ignition to the starter and the push button could you use both to power the starter?

[@projectascet6901]

good question, it should be possible i think but i am no expert

[@intrigue175175]

You should look into reusable zipties. It's actually a thing.

[@WiringRescue]

Thank you, I use them actually. All of the ones in this video are reusable. Thanks for watching!

[@Jeffmackens]

Question: looking at my diagram, the wire going to the starter solenoid, would that be also called “ignition”?

[@nateg2245]

this may be a silly question but I'm newer to vehicle/wiring. Im looking to get a unit with switches like that to keep it neat but want to wire the switches to various light bars/pods, could I just do a separate inline fuse and closed circuit to each switch instead of wiring them all together?

[@TraeVanDerLaan]

Thank you so much helped so muchh ❤

[@WiringRescue]

You’re welcome!

[@hereticxhexen]

is it better to hook a kill switch to the: positive wire for the fuel pump? or SS2 wire for the ignition switch...? which will have less damage &or less error Codes...? on a 2025 hybrid camry

[@justinelliott293]

How much amperage does the switch signal draw? Is it basically insignificant?

[@WiringRescue]

Do you mean the engine start switch? If so, I’m not sure, but it’s probably very small.

[@JavoneeBilbo]

Could you wire it up to be able to keep your accessory switch? Like be able to listen to the radio without the car started or power on

[@MakeAnything-]

Can you do a video on how to wire something so that it only comes on when the engine is running? Not acc or ignition on.

[@markgregory2355]

Hello, does the red active wire connect to OFF side or the ON side of the master switch? Thanks

[@infamousnova]

Great video 👍🏾👏🏾

[@WiringRescue]

Thank you! I’m glad that you enjoyed it!

[@juanmufora]

Those switches are on my bucket list. I'm thinking of using that red switch as a battery power cut switch using a 200A relay (at the '-' terminal) because I rarely drive my truck & want to disconnect the battery easily. My problem is that I don't know how many amps are drawn from that terminal (full load). Have you done this kind of circuit?

[@WiringRescue]

This video has something similar to what you are attempting to accomplish. kzbin.info/www/bejne/j6ucnKSujNCifqssi=xI8FaaUs_WntqYmh As for amperage, you can get relatively cheap amperage measuring gauges that wrap around a wire and measure how much amperage is flowing through the wire. It sounds like it would be a 1 time use for you though which is a bit wasteful. So another option would be to add up the major amperage draws of your engine and make an educated guess. It will take some research online for sure to get a good guess, but you can probably get in the ballpark. Good luck with your project!

[@RandomRichZ]

Off topic, but i need help! Here is what I am trying to accomplish...I have a digital voltage gauge. However it only has a + and a -. I don't want it to be on at all times. Only when I turn the vehicle on. ITs a nice little one. Looks semi "OEM" and has a cool little sequence when it starts up. Now, I have connected it to the vehicle 12V in the dash. But I want it to read directly to the secondary batterey (at the amplifier). My logic says a relay could possibly be the solution but i cant figure out if it is possable and how to do it.

[@WiringRescue]

This is very doable. You will need a 4 pin relay to make it happen. At the relay: - keyed ignition power to pin 86 - ground pin 85 - connect pin 87 to your volt gauge + - connect pin 30 to your secondary battery + (make sure there is a fuse in this wire, as close to your battery as possible. A 2.5 or 5 amp would be more than big enough.) Good luck - sounds like a fun project!

[@RandomRichZ]

@@WiringRescue can a 5 pin relay be used?

[@WiringRescue]

@@RandomRichZ - absolutely! Use a 5 pin, but just ignore pin 87A.

[@RandomRichZ]

@@WiringRescue awesome! thats what i figured i just wanted to be 100% sure! when i do it i will tag you in the video. im doing a video series of the install on my channel.

[@motor_citymuscle288]

I’m doing this right now!!!

[@WiringRescue]

Excellent! Good luck!

[@motor_citymuscle288]

@@WiringRescue it freakin worked!!!!!! With your helpful videos I freakin Rewired my entire 1995 mustang gt convertible in 6 months and everything works. Even better it started up yesterday. I also installed new heads, headers, rockers, push rods, cam and FiTech fuel injection. Thanks for this videos. You are sharing correct and accurate information. In this day and age people aren’t uninformed but rather the issue is misinformed. You are contributing and thank you!

[@WiringRescue]

@@motor_citymuscle288- that’s absolutely awesome! Congratulations on your success! This is a topic not often not taught in ways that are easy to grasp. So I’m just trying to do my part to make the automotive world a better place! 😂 Thanks for watching!

[@nathanthreeleaf4534]

I have this same ignition switch that I'm trying to use on an old 1300 vw engine. I'm completely reworking the previous owner's wiring and they had a wire from the on/off switch to the alternator, is that needed? Also, how would the wire going to the coil fit into this?

[@Chevrolet1994]

Great video! Thanks

[@WiringRescue]

Thanks! I’m glad that you liked it! Thanks for watching!

[@gainsum]

Hey brother ive got one request if I may? Can you do a video on how to wire a hei distributor and guages on this type of push button style?

[@WiringRescue]

I’ll add it to my to-do list!

[@paulwilford5112]

do you need bigger wires going to your item from relay? or same size wire from switch to relay?

[@AshenRJ]

I need to ask before I buy one of this. You stated you needed a relay to power the fuel pump so the whole circuit don't go caput, do you need another relay to power the window motors and other stuffs? Can all of the accessories be in just one toggle switch? I want to keep everything as simple as possible, just one main power switch that turns everything on all at once and a push button for ignition. I don't know absolutely anything about wiring and anything. I don't even know what even a relay is. All I know is that it stops everything from getting fuxked.

[@WiringRescue]

I would highly recommend you check out some of my other wiring videos before you buy anything. Check out my wiring playlist, and probably this video kzbin.info/www/bejne/r2a0ZISFh5mDpK8. You may or may not need a relay depending on what you are powering. A relay allows you to control a LOT of electricity with a small switch. Without them, you burn out the switches and sometime cause fires. I explain all of these things in my other videos. Check them out.

[@AshenRJ]

@@WiringRescue Thank you. The video you suggested had cleared some answers.

[@WiringRescue]

@@AshenRJ - excellent! If you have a few more minutes, this would be the next one I would recommend, to help you understand relays a bit better. kzbin.info/www/bejne/h3TOl3l5gcaSgMk

[@garrykellogg3215]

Hey Jeremy. I am struggling finding a MPH/KPH switch, or a way to convert the RPM switch to work in the MPH/KPH range. What suggestions do you have? The reason that I don't want to use the RPM is because it varies so much, I want a more stable gauge for the switch. ThanX.

[@scottgreen2883]

Great video. I just purchase a completed cobra replica that used a 92 mustang gt donor car and it’s wiring harness and ignition switch. The 92 mustang is notorious for a bad ignition switch. I want to remove the keyed ignition switch and use a new keyed switch (as in your video just using the off and run position) and the push button switch panel that you have in this video. I understand how you’ve wired the setup in the video. My question is using this setup on a car equipped with an ECU that needs to be powered during the start sequence and some components removed (or switched supply voltage) to reduce the current draw during the start sequence. I’ve mapped which items are powered in the current “RUN” position on which are powered during the “START” position. Should I use an additional relay to remove the power from items removed during the start position or just use the signal wire to the start relay on the back of the new push button?

[@raymondharrison1215]

Can you run accessories off the ignition switch you added at the end?

[@spencerburton376]

If im using my cars factory harness, do i need to worry about adding extra relays? Or can i wire the button and switches to the factory circuit that already has the relays to not blow my fuse

[@WiringRescue]

If you are using a factory harness that already has relays and fuses, you should be fine swapping this push button in place of the normal ignition switch. If you are running the toggle switches off of these same wires, it could be a problem because you’ll be stealing electricity from a circuit not meant to have additional components.

[@dinsdalepiranah8759]

Very clear, thank you!

[@projectascet6901]

helo after looking extensiv about such content, i finaly found it very put together in this video. could you eleborate why the master switch needs ground ? is it for the lifght inside the switch and if there were no light inside the switch would it still need a ground conection ?

[@WiringRescue]

It is only used for the light bulb in the switch. If your switch doesn’t have that bulb, or you don’t care about the bulb, skip it! Thanks for watching!

[@projectascet6901]

@@WiringRescue thank you very much, and for the content in general

[@latebloom96]

So I'm wondering I would like to have a push start with no ignition So if everything is wired as it should I'll have the power switch start button and 2 accessories switches Can I leave the accessorie switches on and just turn off the power switch or do the accessories need to be off because the relays are drawing power