4Runner Power Steering Fluid Exchange Speedy's Garage Restoring a 3rd Gen 4Runner P8

Join the Channel for the full HOW TO content! / @speedysgarage
Clear Vinyl Tubing: amzn.to/3n3GNCl
3/8 Barb: amzn.to/3VkYjyr
Stuff I use:
Fuel Drain Line: amzn.to/3h0u4wX
Fuel Pump Relay Bypass: amzn.to/3Hii7h7
Fuel Hat Lock Ring Tool: amzn.to/3UzGCJD
Thin Profile Wrench Set: amzn.to/3P72ElR
Hose Clamp Pliers: amzn.to/3UgSpwX
Weather Pack Pin Tool Set: amzn.to/3uAnxwm
Torx Bit Set: amzn.to/3zOcG50
Pry Tool Set: amzn.to/3t1KGqH
Inch Pound Torque Wrench: amzn.to/3hgaSeC
3/8 Drive Torque Wrench: amzn.to/3t1CmXQ
Nut Driver Set: amzn.to/3NEE8HQ
Race Ramps: amzn.to/2Sicrdt
Race Ramp Low Profile Extension: amzn.to/2MhlDLa
Tire Rack: amzn.to/38X0foa
Cordless Ratchet: amzn.to/3uxBwkV
Cordless 1/2" Impact: amzn.to/2MlxMyL
Cordless 3/8" Impact: amzn.to/2sPLm6K
Ratchet Set: amzn.to/2QbKsJK
Wrench Set: amzn.to/374jt9R
Impact Socket Set: amzn.to/3o06wYh
Impact Socket Set: amzn.to/3xSpiW5
Lug Nut Set: amzn.to/3o1maCu
The provided links to the items recommended may be associate links. The great news about this is you pay the same price for the items you'd buy anyway, but the channel gets a small commission to help fund it.
Today at Speedy's Garage I'm continuing the Restoring a 3rd Gen 4Runner series with a power steering fluid exchange.
Don't forget to checkout my website
www.speedysgara...
Like us on FaceBook if you do that kinda thing / speedysgarage
Follow on Instagram
/ speedys_garage

[@davestewart9146]

I always put the clamps back in the same position unless the factory put them in a pita position, then I’ll move it lol, great video sir 👍😁

[@kmart6380]

Cleaned my resivor after watching video and Cleaned throttle body at same time. Idle working much better made job easier removing air filter box allows more room removing resivor.

[@randywhitlock5122]

Great video. Thank you. I removed the reservoir on another 4runner I had and it was totally clogged, so I will remove it on my 2001 runner when I flush the system. BTW, is your 4runner turbo-charged? Thought I saw that in your vid.

[@FishingTheAbyss]

I love your videos man. I’ve been wrenching on these old 3rd gen’s for a long time, but occasionally I’ll run into something I haven’t messed with like this job here and your videos never disappoint!

[@joshuabrown1731]

I’m so glad you took the reservoir off and showed the o-ring and how dirty your screen was. I considered a fluid flush because my pump has been whining if I steer too quickly and now I see how a clogged screen could be creating vacuum and causing air to get sucked around the 25 year old o-ring and into my system. I will also take my reservoir off, clean the screen, and change the o-ring when I flush mine. I also appreciate how you stated the amount of fluid it took. Thanks for the great video! It was the most helpful one I found on this topic. And I also put hose clamps back in the same position : )

[@roccocroce]

Great video, beautiful truck. Was there a noticeable difference in steerability?

[@classicrocker81]

Fresh fluids are always nice. I still need to do diffs and Tcase. Everything else on my truck is good. Not looking forward to the dreaded valve cover gaskets on mine lol just like every toyota over 100k.

[@BrentWood696]

Yup, I put them back exactly where they were as well. Nice rig!!! Wanna sell it? 😉

[@mjktrash]

If you ever really need to torque a fastener and can't get an actual tq wrench in a location, but can get a ratchet like you had, you can use a fish scale and some math to get a tq level applied. .02 And yes, I do put spring clips back where they came off using the indentations in the hose. : )

[@monkkeyboy18]

Yup ocd on those constant pressure clamps

[@bouaphanhsouvannarath1815]

What’s side ID clear tube you’re used for drained fluid

[@SpeedysGarage]

3/8 I believe

[@neilh.6024]

Nice work - great tutorial. Where do you find that cool front grill?

[@SpeedysGarage]

I made it.

[@Cmc-365]

So the truck doesn't need to be running?

[@mjktrash]

Watching!