4Runner TPMS Toggle Switch Install (V8 4th Gen) Disable TPMS

Make your TPMS system optional with a simple on/off switch and 2 wires! 4Runners require very little maintenance. Mud tires last well over 50k miles and often the TPMS sensors in the tires go bad multiple times before tires need to be replaced. This is not only costly, but annoying - especially if you run multiple sets of wheels and tires. It can cost over $500 to get your TPMS sensors all replaced just to have the blinking yellow light temporarily go away. Or.... you can install this $2 solution and keep regularly paying attention to your tires, eliminating the annoying blinking light in your face
Quick splice connector: amzn.to/3QFQv7W
DC Rocker switch: amzn.to/3H16R82
Terminal connector: amzn.to/3iErqxQ

[@jzenick]

I get why you might want to have it on a toggle. Air downs or for winter tires with no TPMS are good examples. Thanks for the video!

[@CorpusCrispy]

Was able to rig up this same thing thanks to your video 🍻

[@paranrs]

Is a toggle switch useful? I just bypassed the TPMS circuit without the switch years ago. Now I have one less idiot light.