5 Best Beginner Car Mods | The Build Sheet

[@FitmentIndustries]

What was your first car mod? Drop a comment below! Don’t forget we are doing a giveaway this month with Fortune Auto! DETAILS-> www.fitmentindustries.com/giveaway

[@knndyskful]

Fitment Industries my first mod was a cold air intake and cat back exhaust, CAI didn’t fit right had to get a grinder to get it in there which left a sharp edge which ended up slicing a hole in my pipe, the exhaust worked out great though

[@sloweg3113]

Uhh enkei wheels from you guys and tein coilovers

[@superrad1659]

@Prez Bee gross. LOL

[@superrad1659]

3000w system in my grand marquis, circa 2001 LOL. 1st REAL mods were all at once on my '01 AudiTT- CAI, perf.chip, lowering springs, and recessed grill.

[@KoshalRawa]

I always thought gels was bald 😅

[@bentheodille2938]

While everyone is putting these mods to their cart I'm adding them to my wishlist because I need a car first😂

[@ANFOWolf]

Right there with you 😂

[@theogpython1015]

Same

[@Rafaellasvegas]

I feel your pain brothers

[@JonathanC199]

Ahh same my guy

[@isaacjamieson8452]

fr bro

[@0ninns]

First beginner mods: Coupons Savings Spare vehicle

[@FitmentIndustries]

Ope 😂

[@Alkyne10]

Lol true though.

[@dylanmoore_25]

Cars with low suspension: I'm badass Pot holes: I'ma end this man's career

[@atomic_3is]

I find this hilarious 😂

[@jerrymartin7757]

Michigan: This is it guys!

[@Zoid_Smoked2]

Speed bumps

[@edbanks713]

Speed bumps omg

[@shanet3922]

I have to fix a Upper/Lower Ball Joint, so just decided upgrade plus new stablizers bars, shocks, lowering springs, slotted rotors and pads. Now, I'm going really have to watch pulling in parking lots & fuckin 😒 speed bumps.

[@anthonyfulton3218]

First beginner mods: A spoon engine with a t66 turbo with NOS, a full exhaust and a motec system

[@RatelHBadger]

Only if you are running a Civic

[@Nick-mh5gj]

Ratel.H Badger or 3

[@ChaosDragons211]

overnight from japan

[@sloweg3113]

If only I had 10k for a spoon K20 🙃

[@RatelHBadger]

@@ChaosDragons211 then your car will decimate all?

[@cadebernhardt2516]

Everyone knows the best first car mods are stickers that add 5hp each

[@joserxposer]

Cadeorade 10 fuck you beat me to the joke😂😂

[@FitmentIndustries]

You already know fam!!! I have at least 8 FI stickers on my ride, Who wants the smoke!? 😅😂

[@lelandgaunt9985]

And plastic hood vents/scoops

[@BLZPHR]

Whoa, whoa, whoa, wait. I thought it was 1,000hp a sticker?

[@cadebernhardt2516]

Fitment Industries I need some FI stickers so I can get my Scion TC up to 100hp😂

[@adamgaber4711]

A super underrated mod imo is lights, like different housings or an hid kit can really make the car look cleaner and more proper

[@brianramirez3526]

"Oh cool, another 5 bests video!" "The pacer test is a-" "NO, GET ME OUTTA HERE!"

[@FitmentIndustries]

Noooooo stay and watch! 😂😂😂

[@andresgoestoparis8647]

I didn’t even know Gels had hair 🤔🧐

[@FitmentIndustries]

Suprise! 😂

[@artsohc]

Gels doesn't have hair...Gels has WAVES

[@ghostofthedeep]

I legit didn't think he had hair either

[@guzu334]

I legit thought he's bald lol

[@jddrew9390]

idk about hair but he one sexy man no homo 😳😤

[@L-Noble.YT_Hi.Res-Soundminds]

My ten easier and more economical mods to be rolling deep. 1. Clamp on exhaust tip. 2. Roll down window shade. 3. Air freshner inside the car. 4. Ornament on rear view mirror. 5. Limited edition emblem on exterior. 6.custom valve stem caps. 7. License plate trim. 8. Wash your car. 9. Wax your car. 10. Play the ludracris song "roll out"" on your stereo. R😎LL OUT!! R😎LL OUT!!

[@shxkn]

1. Coilover suspension. Get static, get low, get good looking. 2. Wheels and tires. Get lighter, get stickier, get hella fitment. 3. Brake upgrade. Pads, fluid and lines are pretty easy. 4. Engine management system. Cobb, OFT, ktuner, hondata, HKS, whatever is the go to for your platform, get it. 4b. If opting out of an engine mods, short shifter install. These are simple and very well worth it for daily drivability. 5. Methanol injection. Super easy install, requires a protune, yields ridiculous power gains that typically exceed the capabilities of full bolt ons. Would recommend Flex Fuel but this can get too complex and expensive on low compression port injected platforms to be a beginner mod. But methanol is pretty basic. 5b. If again opting out of engine mods, get a solid quality catback exhaust. Notable investments which shouldn’t be considered mods: tint and ceramic coating. All super easy. Highly recommend choosing the engine management system and meth inject over things like exhausts, or aero nonsense, wings and splitters and headlights or turn lights or tail lights or tacky vortex generators.

[@BovineIntervention]

No one on earth is changing an engine management system before a simple headlight

[@chasejones3456]

Plugs/wires general tune up and charging system first. Then intake/exhaust. After you get it running effectively then you go into wheels, tires and suspension. Also whatever aero you deem necessary for your enjoyment. #BigWangGang

[@lelandgaunt9985]

I can deal with that.

[@The_Waraba]

What do you mean by "Plugs/wires general tune up and charging system first, do you mind giving more details ?

[@pearlio7297]

@@The_Waraba I think he means just maintenance stuff such as the fuel injectors, and hoses, and belts etc. however I’m not positive.

[@eggsoda4992]

Lol!!! Wow i didn’t know you guys would reply!!! I’m a 15 year old that loves cars, I’m saving every penny I get, to (hopefully) get a WRX or a Toyota Supra (even whatever I can get my hands on) in time for when I get my license! I ran into your guys’ channel and I am so blown away and inspired by this beautiful work of art creating something with sheer speed and power from something so essential to daily life. I live in MT (very loose speed limits laws) and I’ve always thought I’ve never really had a passion or hobby but I think I just found it!!! Thank you guys so much and if I ever buy and finish my dream car I’ll see if I can send you guys some pictures and support you guys by getting some wheels, tires, suspension, coil overs, etc. from your site! Thank you Fitment Industries!

[@holsete3683]

first mod? Jack stands

[@rowlandmedia7212]

Putting a cat back exhaust on my first car (2015 civic si) for my first mod was one of the most exciting things for me as a young car lover. The addiction has started haha, R.I.P. college funds😂😂

[@migs6674]

How's the build so far?

[@lanadee4835]

Underrated first mod for any car, old cars especially: HID/LED kit and number plate LEDs. Just make sure, please, that you get the headlights balanced so you aren't blinding everyone

[@meatballman4120]

I think you forgot to mention the fitment industries sticker

[@kwekumensah5642]

Meat ball man

[@kwekumensah5642]

Lol I see u on Donut media vids

[@meatballman4120]

Kweku Mensah 😘😘😘

[@kwekumensah5642]

Im a dude......

[@FitmentIndustries]

🤡😂

[@babyboynene]

Intake , headers , exhaust , coilovers , and rims

[@rxckstxr7550]

Wheels*

[@vizualmrs]

Tires

[@tyranq8609]

rims are rims. tires are tires, wheel is them put together

[@L337KidKuso]

I'm flagging this video for gore. That hat is a part of Gels.

[@MrPepelongstockings]

Tires tire tires! Nothing has had more of an effect on my ride than tires. It's what got me into cars in the first place! Was blown away by the performance difference in a new set of GOOD tires, and just started checking out other components from there. Used to think you had to buy your way in to a nice car, Ferrari or Honda and nothing in between, and it just wasn't feasible for me. Now I appreciate the tuning and aftermarket additions that I used to hate. PSA - fit your daily driver with Michelin Crossclimate 2's - I've converted 8 people to them and they've all been blown away! They handle snow as well as a winter tire, are the worlds best in wet conditions, and don't negatively affect performance or road noise too too bad. Shouldn't be near your performance ride, but should be on every daily driver that experiences all 4 seasons imo.

[@crazyloco8844]

Very Good Gels!!! Those are definitely the simplest mods a person can do to get the ride on point! Unfortunately, when I modify I DON'T do it myself work-wise, but I will pay for it to be done the RIGHT way the 1st time! My exhaust, for example, was done front-to-tails, every seam, welded tight! Same with everything else. I need dat paperwork for a reason!

[@tnbjune5177]

Lol I actually have a autozone spectre Intake on my 98 civic I already had an exhaust but the intake really woke the car up a bit it’s still slow tho but the difference is there

[@jasonstyles2798]

Little Tikes is great for a first car, I had a purple one and it was great

[@kafaya77]

pretty good list. I've done most of this list except for the aero I didn't do much cosmetic stuff on my 370z just keeping her classy but other parts I've done that isn't on this list are front/rear camber arms, front/rear sway bars, motor mounts, transmission mount, a couple other suspension mods, and a Tommy Kaira shift knob lol

[@Wadebrwright]

#1 Plasti Dip #2 More Plasti Dip #3 *P L A S T I D I P*

[@chasejones3456]

They said best not cheapest and non beneficial. If it doesn't change the performance in some way it's not a mod to me. You call stickers on your windows mods to.

[@anthonya6693]

Chase Jones but depending on the sticker you could be adding +5 horsepower

[@pedromontano7690]

#4 taking off the plastic dip

[@Fadz-zg6bt]

@@chasejones3456Nigga you drive a shitty ass truck shutup boy

[@KaitouKaiju]

@@chasejones3456 .2g of weight, adding extra grip

[@loosecannon9301]

Brakes are a good modification period

[@deschlong]

Marc McCumber fr, i need new brakes on my g

[@mrcancan18]

Bought my mustang gt and first modified was corsa extreme axlebacks and bbk Catted xpipe not the loudest but I still like to speak to my neighbors when I start her up 👌🏽

[@deanjones1801]

Once I saw the thumbnail, I instantly followed the notification 👀 - BRZ Owner 😂

[@FitmentIndustries]

LETS GOOOO!!!! Welcome to the fam! 😂🙏🏼

[@LordVhok]

The first mod i did on my current car was update the Audio system. Got a new head unit to make the trips to work and overall road trips a lot nicer. Sad to not see that on the list as it makes daily driving so much better. Looking to get some better speakers next. 2nd was a good set of tires though, man what a difference. Don't really have a high horsepower beast so not really sure what to do after that, as adding an exhaust or intake on a sub 100 HP car just seems.. wasted

[@antoniocepaj7544]

doing regular service, and upgraded brake pads, then whatever you want/have money leftover. I should know.... currently saving for propper paint-job(original color for know), minor body parts upgrade and new expensive(better than I currently have) tires.

[@murkish]

heard that Yama track 💥

[@wonkamywilly2456]

That 8hr splitter install reminds me of yesterday... splitter and grille took me 5hrs...first time taking the bumper/front end off this car...it'll be much easier from now on. Plus I'm disabled so definitely takes me more time.

[@FitmentIndustries]

Woof.. glad you got it on fam, im sure it looks dope! Have you added your car to our gallery?- Edgar www.fitmentindustries.com/add-wheel-offset

[@beefy45]

Spent 4 hrs doing my breaks on my focus all because i couldn’t get the warped lugnuts off!

[@chieppachat9381]

I took the fitness gram pacer test that was lots of fun. Texas still uses it last time I checked

[@sondrelarsson5320]

Fitment industries what do you guys think about the swedish atraktor culture or slammed volvo wagons if you dont know what atraktor is it's a kind of car you can drive when you are 15 in sweden look it up

[@starcraft321able]

i just got a 350z, great timing F.I!

[@krabstickle]

The beat at the start is the one in the song Mumble Rapper vs Lyricist by Vin Jay

[@daffhead4975]

Yes, modifing your suspension makes a big difference. Most of the time it will ruin your traction and comfort in the car. Most of the time it's better to install top strut bars.

[@FitmentIndustries]

Knowledge bomb!!!! 🤯😂

[@VideoTech365]

When are you guys going to be able to ship to Canada

[@FitmentIndustries]

We can ship to Canada now! Shoot us an email sometime and we can help you with this! [e-mail]

[@jjDarell]

I just watched a video on how to make money. Now I know how to waste money on my car the correct way hahaha. Man I love you guys ❤️

[@FitmentIndustries]

Ope sorry about that!!!!

[@LaccerHS]

The best beginner mods: -fix your car (a slipping clutch, old oils, rust, bad engine, trans, brakes etc...) -Quality tires (and lighter wheels) -coilovers -intake and exhaust, lips and side skirts for the ricing on top -go to a driving school and learn how to drive your car properly (don't be the Mustang guy)

[@MartianMoon]

What does a new cold air intake do/accomplish?

[@ZzBlackGoblin420Gaming]

Look i know im alone but im gonna put 305 19 45 on the front and 295 19 45 on rear with air suspension on my honda odyssey after i manual swap it first then build a custom wide body kit. Only im done so far is removed 80% of exhaust just the right amount of sounds who knew a mini van would crackle and pop but my god. Between 2-3k the drone is something else

[@GM-br7qj]

Drill holes? 3M Can't hold the whole world? 3M : HA! hold my beer

[@adrian1k38]

Cars with low suspension: im badass Potholes: your not that guy pal trust me your not that guy

[@asapshakur8441]

Do a nfs rate

[@zuesadam7143]

Finally A video that has given me confidence

[@cd8624]

Decals or small vinyl ie banners or trim

[@michaelroyal8950]

First mods I've bought for my 86, wheels (Artisa ArtFormed Titans) tires, coilovers, Mishimoto Performance CAI (oiled)

[@BovineIntervention]

You lost money on that intake bud

[@yohanlol9]

I have a question tho, me and my dad are trying to find a set of wheels for our dodge charger 2010 can you guys tell me what set of wheels I can get? I would appreciate it alot 🙏🙏

[@juusonevala6153]

Are there suspension for subaru wrx wagons witch perform good in normal roads but you can still have fun on dirt roads whitout scraching your side skirts?

[@harrisonmorin616]

Best first mod is a fluid flush and tune up 😂

[@danield8528]

I have an old Civic and it requires 14 inch wheels. Do you sell the rims and tires as a pair already together, or separately?

[@FitmentIndustries]

Both, If you have questions shoot us an email sometime and we can help answer them for you! [e-mail] 🙌😂

[@danield8528]

@@FitmentIndustries Thank you guys! I've just gotten into modding, and it's been stock since 2005. I only got it two years ago so I wanted to make it look cool since I love old cars still.

[@sorinvladu7021]

I swear I've watched this five times

[@stuartsheppard321]

So I got 2 question one is is loud exhaust awsome on any 2nd gen forester. And 2 where is a good brand to buy an exhaust.

[@KidCigano]

Recently installed ISR coilovers for my 13’ Genesis coupe after owning it for a year now.. absolutely beautiful, so soon enough I’m gonna need a set of wheels.... I wonder where should I buy em 🤔 lol

[@FitmentIndustries]

I THINK I KNOW JUST THE GUYS WHO CAN HELP! 😂

[@alexanderpendleton5856]

I just bought a 2013 genesis four days ago. And tips you want to share to a newbie? Thank you very much

[@Swermie]

That backing beat is from the "i turned a bad copypasta into a rap" meme video LMAOOOOOOOOOOO

[@tashaanlogan6990]

I'M NOT THE ONLY ONE THINKING IT I instinctively started rapping it, it might just be my black side and white side working together

[@ZabuzaMLH]

Thank fuck someone else noticed it haha. I was half singing along to the start until I realized it wasn't playing ahahaa

[@pkking678z]

Someone had to say it

[@martenthijssen8406]

When Gels said exhaust at 1:58 and at the same time the rev that was very fucking cool editing

[@FitmentIndustries]

Our videographers stay killing it

[@iberryblu5626]

Should I get a cold air intake or a short ram intake? I live in Minnesota, all 4 seasons exist and I’m afraid I won’t be able to drive my car in the winter.

[@duncan.w2477]

Hey guys i havr a question. I have a renault twingo from 2011 (i'm proud of it) and i want to lower it down but i live in Belgium with stupid rules. So my question is do you guys sell suspantion for a renault twingo 2011 that is legal in Europe? P.s. love the video keep the good work up

[@troycasares5416]

Was looking to get tires for my 2001 Mitsubishi Eclipse GT any recommendations what brand and style any help would be appreciated

[@heavychevy383]

...barber with 30 years experience here... next time ur in tennessee ill hook u up with a good hair cut bro... enjoy yalls videos man, thanx

[@navenpillay]

IDK why but when he said he saw my NFS underground builds, I couldn't stop laughing

[@mrfredgaming]

I could use some help here with the suspension side. I have a 2019 veloster turbo and before I get wheels and tires I want to get rid of the factory gaps between the fenders and tires a bit. Simple right? Well here is my problem. The apartment complex I live in has a very abrupt and steep slope down to the parking lot and with the stock suspension I am about 1 inch away from scraping. Parking on the street isn't an option due to it being a no parking zone. I don't want to get gorgeous new wheels and tires and still have that factory gap because well that just looks bad. What should I do?

[@kingjok3rz]

Mr Fred bag that bitch slam when you want raise it when you want

[@jimher8810]

Headers/exhaust manifold

[@Paddyrk9]

keep up the good content gentlemen

[@longobardilounge8238]

I juat recently found your channel and I'm digging the vids and information. New sub right here right now after I've watched a few.

[@FitmentIndustries]

🤠

[@MartianMoon]

3:05 Yama - Gemini

[@zupinu2000]

i love you

[@Badmon.Bryann]

FI there’s plenty of vids like this. Do a vid about mods after the basics it’ll definitely be a more entertaining vid

[@MetalPopka]

Wouldn't installing a cold air intake cause the car's check engine light to come on? Because there's a sensor inside of the stock intake that's crucial to the car's eco friendly aspect. If you got that check engine light on, and you get this code scanned, you'll fail the state inspection, depending where you live.

[@ShininStar31]

anyone know the background beat at 5:10? please!

[@reesek.1550]

What are the wheels on the top row second from the left called?

[@FitmentIndustries]

Rohana RFX 13

[@reesek.1550]

Thank

[@timothyrlopez]

Is the background music from Snap pt.2

[@maurice8832]

What are those black rim on top right beside the gold ?

[@FitmentIndustries]

TSW wheels!

[@tastysx5233]

I did, exhaust first, then Coilovers, then wheels, now I’m doing body kit

[@FuraiFuru]

hi fitment industries ill be having a toyota AE101 JDM as my first car as a gift for myself on my 21st birthday, but i cant find proper upgrades for 4AFE engine. though i plan to fabricate and convert it into a RWD a few years in the future thanks!

[@Netfixandbuild]

Need all of the above for the EK build we got going on!!

[@venomvaping3883]

I really want to do coil overs and i searched yoyr site but turna out yall dont have alot coil wise for a early 90s celica. And its a shame cuz the gts are mean

[@FitmentIndustries]

Shoot us an email and we can maybe take a peek around to see if maybe we can find something that fits your Celica! [e-mail] 🙏🏼

[@venomvaping3883]

@@FitmentIndustries thank you for youe help and i semt the email

[@deeman7544]

What's the song playing at 4:50?

[@silenciummortum2193]

Hey guys, I am very new to the mod scene and had a question. I drive a 2013 VW Jetta SE with a 6 speed automatic and a 2.5 5 cyl. I was thinking about a COI and exhaust (not much of a market outside of these two for my car). Would you have any affordable options for adding extra power that would make sense? Any advice would be welcome! Thanks!

[@kxngnestor8764]

I wish this giveaway was still out mane

[@techtronic3633]

Would u guys recommend exhaust or wheels and tires first?

[@jevonbigga6172]

Well my dream car already comes with a BIG WANG! Stock so that's one less mod to worry about.

[@xXBeserker9Xx]

Can anyone please tell me what the wheel to the immediate left of Gels' head is?

[@FitmentIndustries]

I want to say those are RSR wheels!

[@xXBeserker9Xx]

@@FitmentIndustries I checked and they aren't sadly. Do you have any way of checking the manufacturer, if its still on the wall?

[@static_Tricolor_camry]

First car mods Window Tint, second car mod an Exhaust, Third car mod Wheels and Tires, forth car mod Coliovers 5th mod fender Roll and pull 6th car mod a Front lip, side skirts extensions, a Rear lip 7th car mod a cold air intake 8th car mod Header, or Headers, if you have a V6 or V8, 9th car mod decals that make your car look good. Not the stupid ones on eBay. I meant a Windshield banner, Rear window decal, side doors decal, 10th car mod a tune.

[@jacobsaadoun5523]

anyone know where to get an exhaust for lexus "2010 is 250C"? having a ton of trouble finding an exhaust for this model

[@superrad1659]

lots of companies make exhaust for that car, litteraly just google the model +"catback exhaust" lol Borla Magnaflow Greddy Invidia.... or just go to a local muffler shop n have them make something. I get the feeling uve never actually looked, cuz it took me about 30seconds to find one... just saying.

[@Meanmachine.ms3]

Yooo I Have A Question Guys !!! Can Anyone Tell Me How To Get The Stustustustuuuu Noise ? I Saw A Video On KZbin From A "" Subaru Wrx Sti Ra NBR "" With The Purist Sound I Have EVER Heard In My Entire Life ! I Know For Sure It Is Not From The Bov. But There Isn't Any Clear Answer How To Make That Sound Out There. Thanks In Advance ! 👍😀😱 And Thanks To Fitment Industries For The Amazing Videos . ❤

[@zupinu2000]

what song is playing at 3:33 it's so mint!

[@hiramalonso97]

What are some forums for these aftermarket parts?

[@isaiahharris1029]

First thing I did was a tune. Not so much for HP, but cause drive br wire sucks ass. Even with modern V8's. The tuner device double as a way to monitor engine vitals so I dont need to go buy gauges.

[@Blingchachink]

this guy is MUCH more likable than that other dude

[@joshuat2408]

But my vett is on mono leaf springs. So I need lowering bolts.

[@AB-vj8rr]

My first mod was lowering springs. Now I'm not sure if 18" rims I going to buy will fit with a solid tire thickness. Help! Ahahah

[@FitmentIndustries]

Check out our gallery for situations like this! --> www.fitmentindustries.com/wheel-offset-gallery ORRRR shoot the team an email and we can help you with this! [e-mail]

[@yaiidavid]

background music name ? 4:03

[@shayslay3416]

Video starts at 1:58

[@miguelmacias4947]

Thanks daddy😘

[@gypht3608]

I have a 2008 Mitsubishi Lancer GTS sedan. I don’t know shit about cars (probably shows through how I named my car) but I’m really trying to learn. I bought it off of Facebook, but I don’t know what all had been done to it so far. I don’t know what it needs to boost its horsepower (which is all I really care about tbh) but what looks cool? What types of performance things can I buy to boost its power to the maximum? I really want to have a sick ride, but I don’t jack shit about cars and it’s hard for me to learn

[@anthonyramos504]

whats that beat from when he talks about cold air intake

[@nathanmoore9113]

Can someone tell me if I should but their tires? Are they good?

[@austinfabian4519]

Peep that vin jay beat tho👀

[@chrispuente2361]

Theres a song called touchdown palestine for the beat at 4:26