How to Build Your Car the Right Way | The Build Sheet

Today on The Build Sheet, Gels talks about some tips for building your car the right way. Now, there is no perfect way to build your car, it all depends on you! But here are some helpful tips to hopefully stay on the right track. Do you have any tips for modding your car? Drop them in the comments below!
Be the first to subscribe - Fitment Industries Garage:
bit.ly/2WwOLEC
Subscribe here► bit.ly/2x8fvNX
Browse our wheel selection:
bit.ly/2Imgo9B
We have suspension too:
bit.ly/2ChmsRw
Upload pictures of your car to our gallery:
bit.ly/2obqAZQ
Check out more videos like this!
/ fitmentindustries
#CarBuild #CarMods #CarModifications

[@FitmentIndustries]

What's one mod you shouldn't cheap out on? Comment below! Let's hear it!

[@SupraSav]

Suspension. I never noticed how much effect it has on everything performance. My suspension has been slowly getting worse, especially since I started making more power last year. My car would slowly squat more and more. Didn't think too much of it. After upgrading/replacing springs and struts, I can launch quicker, the car is more stable, the car doesn't shake in an irregular way when I take off from first gear, it even sounds different while running, it shifts smoother under power.. Just shocked at how many things suspension effects.

[@ZBerd_leNZ]

Idk if its really a "mod" but I will say it 2 million times. Tint tint tint tint tint tint. You can never hide a shitty tint job. I put one on my first car, big mistake. Just bite the bullet and get it done right with good quality tint.

[@FitmentIndustries]

Yeah bad tint can be really gross if it isn't done right..

[@joe_dudley]

Steering wheel and the mounts for that if you’re going quick release. We’ve all seen the video of the guy in a crash ripping his wheel off

[@mosmith3026]

Mounting bracket. Y'all need to stop mounting everything under the hood with zip-ties

[@e-bit6151]

Step 1: have enough money.

[@madmaxxxthen30-rwofficialm23]

Start with a 10 thousand dollar budget

[@johnplatt9476]

No such thing

[@Christian---]

Enough is subjective lol

[@R3DDWOLF]

100% agree

[@jflaoeal]

Step 2: Get out of debt

[@Gfin28]

1. Maintenance 2. Performance/Quality of life mods 3. Aesthetics In my opinion

[@lilblingking1491]

Agreed!

[@Jh20-]

110% with this^^^ If it doesn't run what's the point.

[@ruikazane5123]

Building the engine to be more capable than target power. Reliability will increase drastically

[@willarddickson7551]

@@ruikazane5123 Can't stress this enough! No point slapping a turbo or even just sending it to redline, ever, without building the integrity of the engine first. If you want it 400 horsies running, then Id suggest building it for 500. You'll never have a problem, and you can still say honestly that the car can run 500.

[@jamesearlcash7725]

Exactly. Go before show

[@Giordansdetailing]

DO NOT cheap out on lug nuts.. don't ask.. haha..

[@gamingislife3332]

What happen

[@maverickmamangon8557]

I’ve never heard of this but I now won’t, LOL

[@valentino-ss7yd]

You shouldn't cheap out on ANYTHING

[@olsend]

Most under rated comment‼️

[@dmglolmasterplays3353]

@Vasco Dundev jesus took the wheel

[@Genevo9]

Build it to your taste, no wrong way 👍🏽. Do research and build!

[@kc.auto__4267]

Genevo9 there are wrong ways but you know

[@i_am_terom4810]

So if I want to start by burning the car, it's not wrong?

[@mouaxiong8618]

Like what he said earlier. Use your common sense and do what you need not want so there won't be problems. And you've waste all your money on a body kit. Then you got a engine problem. That's when you never get to drive your car because it's broken.

[@isabelhernandez4560]

@@i_am_terom4810 lmaooo burning a car isn’t a part of building g

[@GAMMA_AF]

Yeah, there's still a wrong way though. If you cheap out on parts and put together a low quality build, it's going to look like shit and feel like shit.

[@haikalhamid2324]

1. Do your research 2. Don’t cheap out. Crazy shit need crazy spend 3. Intro is 🔥

[@mustang3.0]

How to build my car the right way. Find cheap wheels on Ebay Put a body kit on it and do not paint it Put a sweet fart can exhaust on it Put some neon lights underneath Find some sweet stick on fake vents and hood scoops at Autozone.

[@mosmith3026]

Congrats you're officially a Mexican now

[@mustang3.0]

@@mosmith3026 SWEET!

[@love-eg8gm]

Wtf mexican ricer yuh

[@pilotoblackbird433]

@@mustang3.0 Mexican gang rise up hope you upgraded ese

[@dunnydtherapper8809]

Listen, it’s ok to have fun with the cheap ricer mods as long as you don’t really think your cool.

[@artsohc]

I'd add: When replacing parts that interact with other parts, replace both of them. Don't replace rotors and keep your old brake pads (and vice versa). Don't replace your springs and maintain your stock struts/shocks (unless they are super sweet mag-ride or something). Don't replace your anti-roll bars and keep your factory bushings. Also, when possible, pair parts from the same manufacturer. You would be surprised how often buying lower control arms from one manufacturer and upper control arms from another along with sway bars from another with chassis braces from another yield a lesser quality experience than buying everything from the same company...even if it means paying a little more $$. Lastly, and in my opinion most importantly...if performance is your final goal, buy the best tires you can. Taking your stock rubbers off and replacing them with Michelin Pilot Super Sports or whatever will likely equate to better acceleration, improved handling, improved braking, & better steering input and response. Also, if you can install a wider tire on your wheels (or can buy wider wheels) go wider. It's all the same benefits, but more of it. Only real downside is an increase to road noise but let's face it, that intake and exhaust you installed will easily drown out the tire noise.

[@johnporter267]

Step 1: get backed into by your neighbor. I got 2k in insurance money for a $100 fender. Bought a whole body kit for my bmw but had to pay a little outta pocket to get it painted. To sum it up I got to mod my car for cheap :)

[@FitmentIndustries]

I mean that's one way to do it 😂

[@x18shadow3]

good good..... NOW DO IT AGAIN

[@WarriorOfEden3033]

Too many discontinued parts for my car to risk it

[@caleb5792]

Is anyone else bothered by the fact that the sign above the door isn't nicely in the middle?

[@flydad9851]

F*** you... not because your right but because now that I read your comment it’s all I see now lol 😆. WHY ISN’T THAT CENTERED!?!

[@raffaelesantoro9754]

Agreed with the first comment 😂 fuck you made me not be able to watch the video without staring at that!

[@FitmentIndustries]

DAMN YOU! 😂 Never even noticed that till now... 😰

[@maharl7897]

Fuckkkkk you, now I'm triggered

[@DareBear-wt4iy]

I fucking hate you for making me realize thay

[@ghostshrimp7847]

1 Coilovers 2 Rims/tires 3 Build Engine 4 Carbon Fiber Hood 5 Turbo This is the list im going for after get my new car(not new but used and new to me)... or might switch 2 with 3 or do 1 3 5 2 4... Idk have a while to think about it :3

[@ZenthisGaming]

Your original list is the best one of those. Or switch 4 and 5 but everything else is perfectly in order. Cheers man, good luck on the build!

[@joe_dudley]

Needed this advice. Just got an e46 and basically nearly did everything you guys said not to, guess I don’t need those MaxSpeeding Coilovers 😅

[@variousengineering1965]

Definitely try to daily the project before changing anything, helps find more of the little issues

[@FlyingSpaceOstrich]

I'm so glad I decided to watch this right now. This has probably saved me a great deal of trouble in the long run. I need to do a lot of maintenance/repairs on my car before I even think about coilovers or wheels, especially since it's about to snow where I live anyway. Thank you guys so much!

[@FitmentIndustries]

Glad we could help!!

[@deadhead_012]

I spent two years with my 04 G35 sedan before even buying an exhaust. Religiously changing oil, fuel treatments, plugs, coil packs, cam sensors, ect...... and within the last 4 months and 5k later wheels, tires, suspension, exhaust, intake. (Intake is purely because the stock airbox is a pain in my ass) and i knew all along what i wanted out of the car. I dont want numbers, i wanted a low and clean VIP style car that i was proud to drive.

[@BodiaGuy]

I'm saving up for suspension, wheels, breaks, and aero kits for my s2k... I'm looking forward to purchasing those items from you guy especially Suspension and Wheels, hope you guy could get me the size I need.

[@FitmentIndustries]

We would love to help you when you are ready! Just email us at [e-mail] and we will get you setup!

[@DeAndreEllison]

lmao "build the car for yourself"..... next episode... we'll be shittin on your ride in "from the gallery"

[@FitmentIndustries]

Oh helllll noooo 😂😂😂

[@ruikazane5123]

Gotcha!

[@khamthegreat1]

The real Alex from Fitment Industries is speaking to my souls right now! First thing I did when I got my 2011 370z was fix it because it was used and I had a lot of minor problems that could have turned into bigger problems down the line. I can’t tell you how much money I spent before I actually bought my first mod. I also spent a lot of time at the dealer because regular shops couldn’t fix these so called minor issues. Then I did wheels tires and suspension 😜

[@shadystuntsofficial]

“Let me tell you how to build your car” typical subie bro 😂😂

[@jaxongerace9664]

Jasper e36 gang

[@therealr0bert]

Network and swap labor! If you don't have a lot of specialized skills and tools but you know people who do don't be afraid to ask (just take the hint if they say no 3 times). I can change brakes but when a friend asked if I would weld something for him while he did my brakes I said sure and he saved $$

[@SilverMoon1134]

Planning has always helped me. Making a list of parts that I wanted and put the estimated prices next to them. Helped me budget properly.

[@RB-sb9nj]

I actually did that stuff with forza :D I found my car by accident. So i decided to complete the rest of the game with it. And now i + - know how i want it to look in real life.

[@Kurtage77]

Always do research first! There is no rush. I’ve rushed into modding my past cars within a few months of owning them and lucked out for the most part. However I do regret jumping the gun when I could have waited and saved for better quality parts.

[@CarsandChris]

I'm both surprised and disappointed that you didn't harp on those fools who buy a wing for their base model Corolla before doing absolutely anything else to the car

[@Vykk_Draygo]

I used Forza to show my fiancée what was in my head. It's actually a pretty awesome tool. Assuming you aren't going for crazy stance, etc.

[@512460]

Yea forza h4 hasn't got me covered lol. No mk5 r32 lol. Not that it really matters as i intend for my exterior and interior to the oem plus (stock height,stock wheel,little oem upgrades to interior like new shifter knob and updated steering wheel. And under the hood will lay a turbo. Making it a r32 T :) going stealth tryna get 320WHP this is my goal

[@larry12345]

cant agree more! car builds are like zen; patience over impulse

[@shaun0162]

This gave me a whole clear picture of what I need. Thank you gels

[@siab1000]

Thank you Joseph and Fitment Industries. Sure, it’s common sense but if it really was, this video would not exist. But thank you for helping me change my perspective :) “Don’t listen to others, just keep building” -LaTommyLa

[@MrTheHillfolk]

I'm buying some of the finish parts,even though I'm only halfway thru my build. I want to see those parts installed is the goal, it keeps you pushing thru the obstacles you encounter during the build.

[@magnusmomrak]

What do u think about the axaim 2002. Rear mounted wing. Wide body jdm style?

[@harta_1509]

Great show ! I have question. I have 2018 G30. I’m planning to buy 20 in front and 21 in back. But what’s the best wide diameter? Thanks

[@deelodorito5716]

Me: *watches this video* Also me: *drives a stock 2001 corolla*

[@MellyP1]

L

[@samuelpurvis8786]

Corolla gang

[@preshandpereira4035]

I drive a 93 bro. No regrets

[@pilotoblackbird433]

Me trying to figure out how to upgrade my 2009 base rav4

[@alfredodominguez2799]

@@samuelpurvis8786 Borolla Gang

[@jessepagenkopf3653]

What’s your guys opinions on winter driving a miata in Alberta

[@CLVS]

lift it and you good

[@FitmentIndustries]

Sheesh if you get as much snow as we do here in Wisconsin I don't know if id advise that! 😅

[@jessepagenkopf3653]

Fitment Industries we get a fair bit but it’s cleaned pretty regularly and the roads aren’t salted

[@429supercj]

I wouldn't but it might be fun

[@krisleblanc8573]

I dunno about where you are, but in Red Deer mid winter, that'd be a pretty hard thing to do

[@Jesusprayerwarriorbw]

Great video sir. Quality is a #1 top shelf always thing to do.

[@Sentient6ix]

My next project is gonna be an 86/BRZ/FRS build. My intentions for the build is very conservative, as I intend to daily the car. So, pretty chill coilover system with barely half an inch drop. 18X8 square setup wheels, keep the OE wheels to slap winters on them (am Canadian). Intake and exhaust swap. Tune. Strut braces front and rear. Master Cylinder brace. That's about it. Much more reasonable than the last project I had, and subsequently abandoned. It was a '97 F350 crew cab long box 4X4 with a 460 that has fueling issues. My plan was to rip out the fuel injection system, and swap in a 4 barrel carb with an inline fuel pump. Yeah, never happened.

[@marsseguin8683]

Intro looking 🔥

[@FitmentIndustries]

Thank you!

[@clutchkickpj693]

*WAIT* so I shouldn't build a rocket bunny gt86 with a chassis mount wing slammed on some ccws? *HOW CAN I MOVE ON WITH MY LIFE* !!

[@mangokraken]

With that build you wont move out the driveway buddy

[@madoka8372]

suspension and brake's first then install a snail boii

[@matthewgiang8400]

Which you can get at FitmentIndustries. Com

[@imflixzy4189]

Appreciate it! Been working hard to get my first car, I'm so excited!

[@azndreamers209]

I got a 2019 honda accord sport 1.5t cvt. What I want to do is lower it 2 inches with coilovers( any recommendations?), prl intake/intercooler, power stop Z23 brake kit, and borla exhaust system, and then tune it with ktuner v2. Thats what I want to do first in that order. Bodykits can come later. It looks nice when its lowered amyways.

[@mattowens3857]

I have three ideas im undecided on right now: 1. 2JZ in a Dodge Challenger 2. Muderdededed AF 1965 Lincoln Continental 3. 350z(ish-370, g35, g37) build. Maybe a v8, maybe not. idk what it'd look like. But they're cheap and I like them

[@AzraelIgnis]

I like a balanced car. I like that combination of handling and power. I've only driven a few 500+ hp cars in my life (not mine) so I do have that experience under my drivers belt now. And if I could afford it I would definitely buy a 911 gt3. Since I can't, I've been looking at getting a BRZ. They are sharp looking, handle well and plenty of mods to install. This leads into the topic at hand. Knowing your build. My focus would be street/track, as much I like the wide body I wouldn't want to cut into my fender just for a look. Though the BRZ lacks usable power in late models, here's to hoping the 2022 BRZ is worth the wait.

[@Imperialsummoner]

That blue S2k looks amazeballs!

[@justanotherbluebelt2691]

Can u plz do a So You Want vid on the INFINITI G37

[@deadmemes9113]

g37/g35 would be cool

[@ruikazane5123]

One rule that I follow always: Function over form!

[@sundae7111]

Arguable

[@ruikazane5123]

@@sundae7111 But don't be a ricer. That's it

[@Dzsevus]

Literally bought a 1999 SAAB 9-3 as a project car and it's been a love-hate trying to get it on the road, and then I see the clip of the one smoking in the video. Needless to say I nearly flipped aha.

[@JonathanJames18]

The 93 is a beautiful daily when you finish the build.

[@leevihaukijarvi267]

Beautiful e30

[@ABAtrading]

So I just purchased a 2019 Acura ILX. I think the car has great potential but only if done right, is there anyone from Fitment Industries that can help me get started? What’s the firssst thing I should do?

[@JohnDoe-us1ek]

Whatever you want to do lol they can’t tell you what your goal or idea for the car is. First things first how about you tint the car lol?

[@ABAtrading]

BilligerentPeanut so I actually did do that lol. Idk why but that doesn’t feel like a mod cause everyone can tint their car not everyone can lower it, have the rims changed etc. I got 30% done all around since my car is gray it looks darker than what it is. I just don’t know what to do next lol suspension?

[@JohnDoe-us1ek]

Allphonetips Yeah I wouldn’t consider that a mod either lol just the first easiest thing you can do to make a noticeable difference. Wish I could tell you I’m not particularly into “modding” my car. Just spent about 3k on my sound system tho 🤣 I found this channel bc I don’t know jack shit about cars and need to learn for my own good and for when I put new rims and tires on and figure what Coilovers or lowering springs to use and all that stuff. Hope you figure your build out!

[@ABAtrading]

BilligerentPeanut yea lol I’m still going around watching all the Fitment videos to figure out my build haha but good luck to you to

[@FitmentIndustries]

Hey there! Shoot us an email at [e-mail] and we can help you find something, Personally I would go suspension then wheels and tires!

[@Mags86_]

The beat in the beginning Fireeee🔥🔥🔥🔥

[@LSxHunter]

I can't believe some of the things I've discovered during maintenance. My biggest rule when buying a car is NEVER to believe the seller on the maintenance schedule. First day in the garage should always be spark plugs, fluid changes, and shake downs.

[@hahnselativ695]

Wonder when r u guys gonna make a video about compact suv’s🤔

[@mirrakmori1828]

If it doesn’t feel right don’t do it. Never rush to failure. Learned the hard way with a drill and some spacers.

[@JesusIsMyKingAndRock]

What’s with the audio gain change? USA limited at the end for the best results and compress it too a bit more! Otherwise a great video! :)

[@HeyBigChriss]

No! I miss the way people used to mod their cars! They used to be unique and interesting. Now, everyone does the SAME thing. The builds are all the same because people are afraid to step out of what’s popular. Even if they don’t like it.

[@AndrewB23]

People aren't afraid to step out of the norm, they just want the same attention the last guy got so they do the same shit

[@Bytrl]

My method has always been the same. Repairs, tint, audio, cat delete, tune, coils, align, wheels/tires, align again and corner balance, lips/diffusers, detail, list, lose 10k, repeat.

[@durantapscott1297]

Hey I'm new to builds I gotta 7th gen Honda Accord I wanna just mod the looks like bumper rims lights and pipes but I don't know what I should go to get it or what to get

[@FitmentIndustries]

Forums will be your best friend! Maybe go on reddit to the subreddit r/Honda and see what other Accord owners are doing!

[@mustakimali2392]

The first 5 thing to do before adding the big stuff (like putting a turbo do this before you do the first mod ) 1. Get a stock car on Google then go on photo shop and edit the parts on to it 2. Choose parts carefully (do not go and buy the first thing you see like a ricer) 3. Check your spending. 4. feal your car with the parts 5. do a list of what you have done

[@mustakimali2392]

Thx for the heart

[@amitnag870]

Question. I have 215/55ZR17 tires on my stock 03 maxima gle. If i buy 25/45ZR17 tires will they work and be fine or a mess? Since im only changing the tire wall by 10. From 55 to 45. Please help.

[@FitmentIndustries]

Shoot us an email at [e-mail] and we can help you!

[@Nothingmob]

will start shipping to canada ?

[@FitmentIndustries]

Shoot us an email at [e-mail] and we will get international shipping quotes for you!

[@colincantskate]

Good advice I'm working on my own car rn

[@ronaldzeits3027]

What videos are yall uploading on the fitment industries garage channel

[@FitmentIndustries]

More informational videos basically!

[@mangokraken]

Just bought a stock as fuck (minus type r jdm front end) Integra and here's my gameplan: Brand name wheels on sticky tires Adjustable suspension Wilwood brakes Red Recaro seats (my teg is red) Done. I dont need to go fast I just like the cornering :) Maybe a jdm type r swap way later down the road. Maybe. Before yall laugh at me and my Honda I also owned a z32, 04 blob eye STI (jackass ran red light and hit me totaling it) and still currently own a 68 vw beetle (restored) and a 66 Mustang (work in progress) Edit: you bet your ass there will be neon underglow.

[@DarkestKnight2424]

Well I crashed my 2011 mustang v6 alot now, and I'm replacing the rear brakes , upgrading the front suspension and then maybe a borla attak exhaust because I want it to be louder ...

[@GM-br7qj]

So I just got a 2016 vw jetta. What do i do first ?

[@FitmentIndustries]

Suspension then some wheels and tires homie! www.fitmentindustries.com/ 🙏🏼

[@GM-br7qj]

@@FitmentIndustries thank you! Also I've watched so many of your guys videos looking at what to do and what to get .

[@GM-br7qj]

@@FitmentIndustries I want to get wheels and tires from you guys but can I also get suspension stuff to get it lowered with you guys too?

[@skymancalla5992]

Quick question..is it a problem if i drive n German car but hav JDM wheels??

[@ricker6187]

Oh the time I’ve spent on forza

[@SMD-si7fm]

The new intro is cool af

[@thatrupride]

I always have a hard time doing stuff to my car I got an invidia mid pipe and some tail lights so far on my is350 but I just the way I was brought up it’s hard for me to spend higher dollars for quality parts and I have so many things planned but it’s just internally hard for me to do it idk maybe I’m just weird

[@St_Duppy]

What rims where those at 7:58 ??

[@FitmentIndustries]

I believe MB Motoring Wheels!

[@ybnalex9628]

Just got a m3 e36 any tips??

[@zenkikijp9667]

YbnAlex me personally (not lotta experience or a expert but🤷🏽‍♂️) 1.decide how you wanna build it (drift,track,street, ect.) then if there is any issues fix them and if it’s a part that might get replaced with your build buy a decent quality performance part instead of a oem one 2. PAINT CORRECTION I can’t tell you how much better a car looks with good maintained paint with no micro scratches ect. 2. After you have it all fixed up and nice paint start deciding the build order, do you want it to look good/have better grip/ acceleration with new wheels and tires first or do you want it to have the power first (Also I highly recommend starting with all safety stuff first!! Your life isn’t worth looking more cool or faster before safety). And from there the world is yours 🤷🏽‍♂️

[@ismaelrodriguez2706]

What’s the name of that wed site where you can customized your car like the m3 ????

[@FitmentIndustries]

That's Forza the video game

[@d.lmedia9875]

Love this vidz! You are my bro gels

[@alexcheetah79]

This video is so underrated.

[@Mitutumuch]

always have to learn your new engine with basic maintenance. also sucks not having my car in forza. I feel the pain.

[@natesmith559]

Dude not a single game I can play has a z31 in it and being able to design your car on a website or game helps so much! I’m to the point I might just try drawing it

[@toycoma98]

I sometimes see cars with new rims, tires, and lug nuts but with those regular rubber long valve stems. Shoulda installed some aftermarket stubby valve stems before the tires were mounted.

[@_rn_3861]

*english auto subtitles* 0:15 - Im jealous woman , fitment industry's real tighter

[@FitmentIndustries]

I dont see that 😓

[@EduardoReyes-up6zo]

I like to watch this video once a week to get myself through it without recklessly spending all my money on my car

[@jaykatana9418]

One thing you missed, Dont rush your build 9 times out of 10 ull stuff something up and its always good to take your time and make sure every detail is perfect or ull be pulling parts, tranys and engines out trying to fix that one thing you rushed to get onto the car but didnt research fully

[@JohnDoe-us1ek]

Did this exactly with my sound system 😂 rushed it for the first time but really just wanted to see how it’d turn out and now I know what to do, not to do, look for etc. sometimes you might have to fuck up so you can learn how to do it the best way next time vs maybe just doing it okay the first time and not messing it up.

[@markc9949]

At this point a non-widebody FRS/BRZ is way more of a neckbreaker to me now. Rocket Bunny is stepped on.

[@jaimem2869]

Can’t wait to start building this 5.0 🤫

[@BrokeBoyAndy]

I see we made it in here 👀🔥

[@whauto9115]

3:57 spitting straight bars

[@FitmentIndustries]

#onthecomeup

[@danyyson]

Kept it real ! 💯💯💯

[@ZenthisGaming]

The first 3 minutes of the video describe my first ever build haha

[@AyyItsJk]

Is there a RIGHT way to build a car? Other than not ricing it, I think any other way works! There is no right/wrong way to build it. Er, maybe other than rice.

[@AJKing8]

Damn, I paused at 7:56 for a good minute

[@FitmentIndustries]

Too Saucy 🔥👀

[@cheddar4203]

For any new builder imma guve you a step by step on what to do. Step 1: buy a cheap starter car like a 350z or a honda but its up to you Step 2: do every maintenance you can think of on the car, will give you way less prombles and gives you your original HP, wear and tear tend to decrease your HP by a lot. Step 3: set a budget, 5k-10k is what you should aim for could include buying the car but the mid tier to higher tier mods tend to be over $800+ but its worth it. Step 4: tune your car or it will explode. Also you HAVE to take it easy so ur new parts get use to the new parts Step 5: after finishing the build HAVE FUN but please focus on track racing instead of the street there's people that would be heart broken if they find out you injured or killed someone, if you dont wanna die think about others other then that HAVE FUN!!!

[@jeeyahnbrah3510]

that intro is hotter than the wildfires here in alberta. hoo lee fowk

[@FitmentIndustries]

Interesting comparison 😂

[@nightreyn3603]

Attention this is a public service announcement SLANTY WHEELS AND A BIG WING IS NOT A BUILD thank you

[@ruikazane5123]

Add in massive fenders

[@raystenzi4031]

Big wang and fender flares are the new tribal tats. They think they are unique and bad-ass, but so many people are doing this it become unoriginal and cheesy.

[@eccomi21]

@@raystenzi4031 i will make my car as mad maxy as road legality allows me to xD

[@JulioGallardo98]

Good ted talk

[@RitztheDJ]

Im liking the new intro

[@jimrossabrena7955]

What is an SRF?

[@madmaxxxthen30-rwofficialm23]

But 2004 Pontiac Grand Am GT ram air 3.4 l V6 is not in any game now what? I keep changing the list cause i do more research on the part and there not good and end up getting other parts from Pontiacs from the 2000s

[@waitheman2078]

Good advice bruv

[@lakessbm]

So you want an mx5 NC?

[@bigbee4774]

1st : Buy 100x 10mm sockets!

[@bangerdanger5245]

I like how he used my car as an example on that app👌🏽

[@Histanical3D]

whats the BMW behind him?

[@FitmentIndustries]

our shop E30

[@thentherewassway2324]

What if you're building a kit car?

[@lukebarnard7684]

I’m building a doo doo Sentra 2.9s cuz I’ll either crash it or blow it (I doubt I’d crash it) but it’s my first build so I just stripped it and making a sleeper. So far so good it didn’t get gapped a Audi 2.5t from 20-100 we were neck and neck so don’t sleep on the Sentras 😂

[@lukebarnard7684]

2.5L my mistake

[@FitmentIndustries]

Its okay we still love you 😁😂

[@lukebarnard7684]

Fitment Industries so I’m gonna spend good money on seats and a wheel and of course and I’ll come to you guys for wheels and suspension, but what’s some brands I should go for/avoid when it comes to performance that won’t break my wallet?