5 Clamp Meters Compared - Kaiweets Clamp meter shoot out

I'll compare 5 Clamp Meters from Kaiweets in this video '5 Clamp Meters Compared - Kaiweets Clamp meter shoot out'. There are both AC Clamp meters and AC/DC Clamp meters. I'll compare the Kaiweets HT200A, HT206B, HT206A, and HT208D.
Kaiweets HT200B clamp meter: amzn.to/3i0n53x
Kaiweets HT206B clamp meter: amzn.to/3xBU3xW
Kaiweets HT206D clamp meter: amzn.to/3edd0iS
Kaiweets HT208D clamp meter: amzn.to/333kaAa
Kaiweets HT208A clamp meter: amzn.to/3h4MRoL
Here are 5 codes that can be used for the first 5 people.
HFV4-85GF56-P6GAAB
HFP9-ZLSPKT-2CEXAP
HFB8-QLTT9Q-4YQZA5
HFPQ-WG4RHP-JLQDAT
HFGS-ETCY93-LKY5AW
these are 50% code of HT208A
The original price was 54.99, now it only costs 27.49.
Start date: 2021-7-6
Expiration Date: 2021-7/31 11.59 PM
This is the link to the Micro-Cap video for the multimeter challenge. Shipping outside of the USA will need to be paid by winner (sorry);) • KissAnalog John Audio ...
Links to Hioki multimeters:
Hioki DT4256 Multimeter: amzn.to/3rKg4Ha
Hioki DT4282 Multimeter: amzn.to/39DVP7T
Links to other related videos:
Hioki DT4256 Multimeter: amzn.to/3rKg4Ha
Hioki DT4282 Multimeter: amzn.to/39DVP7T
Testo 760-2 vs Fluke 117 Multimeter - which is best? • Testo 760-2 vs Fluke 1...
Fluke rant test leads: Fluke Rant - Better Test leads Please • Fluke Rant - Better Te...
Fluke TPAK Hanging meter Kit $42 or $10 • Fluke TPAK Hanging met...
Fluke Rant - are they overpriced? • Fluke Rant - are they ...
You can support this channel with this link to Patreon - I really do appreciate your support? This support helps me purchase the equipment I use for testing a reviews.
Patreon.com/KissAnalog
Or you can support this channel with a one time donation on PayPal at: [e-mail]
Links to meters:
Klein MM700 multimeter: amzn.to/3vm8JR3
Fluke 117 multimeter link: amzn.to/3oS2Dnx
testo 760-2 multimeter link: amzn.to/2JRRS5S
Amprobe AM570 multimeter link: amzn.to/3oQMDlM
HT200B link: amzn.to/2KAne0J
Link to FLIR meters in Amazon:
FLIR DM92 multimeter: amzn.to/2ztKOXI
FLIR DM93 multimeter: amzn.to/3ebyASF
Links to other Meters:
Kaiweets HT200B AC current clamp: amzn.to/33e3czt
Kaiweets HT206D AC/DC current clamp: amzn.to/2HzYLHO
Kaiweets HT118A 6000 count multimeter: amzn.to/3fqfWYR
Amprobe AM570 multimeter link: amzn.to/3eurd8S
Fluke 117 multimeter link: amzn.to/2AhsEbA
Amazon Commercial 90DM030 multimeter: amzn.to/2Jl9yCT
Zotek multimeter: s.click.aliexpress.com/e/_dSJ...
AliExpress Store: bit.ly/3fkMlPb
Amazon Commercial 90DM610 multimeter. amzn.to/37VXe7E
or amzn.to/2Zdo8VU
Popular Links:
Micro-cap Tutorials playlist link: Micro-Cap • Micro-Cap
Boost Converter Introduction • Boost Converter Introd...
Power supply talk: • Power Supply Types and...
Link to Amazon for Boost Converter: amzn.to/32HOEFsY

[@Vodzoo666]

Excellent video. Thank you so much! I was looking for a meter for myself and couldn't decide until I've seen your review. You've covered all the details in this video and in the other one about the HT208D too. All the features were explained and tested and no shortcuts were taken. I decided to buy this HT208D thanks to you.

[@KissAnalog]

Thank you for the great feedback!! I think that is a great meter. Let us know how you like it;)

[@veracity91]

how is it holding up? 😬

[@Nermash]

Thanks Eddie, great video!

[@KissAnalog]

Thank you - I appreciate you!

[@madrussian4252]

really appriciate your work you put into this video

[@KissAnalog]

Thanks so much!!

[@versace885]

HI Eddie, thank you for an awesome comparison video. Nice shirt and supporting your brother-in-law.

[@KissAnalog]

Thank you! I appreciate you!

[@wingerrrrrrrrr]

A significant improvement in the 208 from the 206 is the addition of a range hold feature. That allows min max readings to be made which will just over range on the 206. Also makes for much quicker measurements when doing a repeated series of measurements in the same range. Gets annoying waiting with the auto range lag each time you connect up, when you have no option to select a fixed range. Aside from the display, which is better on the 206 series, and maybe the larger size, the added value from the 208 is definitely worth the extra cost. Better probes, higher speed, range lock etc make it fully capable. On the 208D that I've got, the DCV accuracy was surprisingly on the mark, with a 0.006% error measured through a range from zero to 110V. Only real complaint I could come up with is the min max feature doesn't have a display for the ongoing readings; it can only display the min or the max. If you want to use the mode to continually monitor voltages while just catching any spikes that it comes across, it can't do that. I was surprised they forgot to include that, with every other thing about it so well done. Well, maybe also the display, which is actually a downside compared to the traditional LCD display. The reverse display is pretty hard to read in sunlight without a lot of hand shielding and fussing about getting the right angle on it. If they stuck with the old 206 display type and just ditched the timeout on the backlight, it'd be aces 👍.

[@ausmartin1]

Excellent comparison video, just what I was currently looking for pardon the pun 😉😎

[@KissAnalog]

That's great! Thanks for the feedback!

[@TRONMAGNUM2099]

Well all the promo codes were used up. I do love Kaiweets products. Their products feel well-built. I just moved and have been using my Kaiweets outlet tester to make sure everything is wired in correctly, and it works great.

[@KissAnalog]

Thanks for letting me know. I will check with Kaiweets to see if there was a problem. I’d be surprised if people actually used them that fast. I can’t even get that many responses when I give meters away - let alone when I make it a challenge;) I usually have to wait several weeks to get a few emails asking for the free meter. And I don’t usually get spikes like that at Amazon. This would be a first;) I’ll check and get back, plus I think that they were giving me new codes for cases.

[@noneofabove5586]

Very nice, thank you. I think I will go for the 208D.

[@KissAnalog]

Great - I think that is a good choice. If you go to the Kaiweets store (you can use the link in the video description) there is a 15% discount using the code KA15. I find this works in conjunction with other sales or discounts.

[@alexivanov2891]

Thanks for great review, I've found many answers. 16:08 The cheapest HT200B turned to be fastest and most accurate at low AC currents. It is the only measured exactly 0.266A same as reference multimeter without any delay. Priceless feature for Differential Current Protection unit testing and especially AC-leak identifying and troubleshooting. Next in line is HT206B which adds 6000 counts, MIN button, LoZ, LPF and USELESS temperature measurenent (BTW who ever use it ???)

[@KissAnalog]

Cool, thanks! Use the link for discount: Get 15% off; use KA15 code at Link to Kaiweets store: kaiweets.com?sca_ref=1269738.glN6S8aePH

[@wingerrrrrrrrr]

37:53 are the prices backwards for the 206A and 206D there, or is the 206A something like a collector's item?

[@hullinstruments]

Where did you get the PCB roller and semiconductor sample boards? I have a looked online and I can’t find it.

[@KissAnalog]

Thanks for the question! I was given these by reps who I met with on the job. I've collected a few over the years. I wish I had kept them and collected them:) I'll check with some reps to see how we get them. It would be cool to give them away;)

[@ats89117]

I purchased the HT208A just for the $29.28 delivered price, but since I do a lot of audio work, I'm always interested in a current clamp's frequency range. Most are only for line frequencies. I've purchased some Micsig current clamp units for high frequency work and I'm guessing that the Kaiweets won't go up very far, but for $29.28 it will still come in handy.

[@KissAnalog]

Wow great price! That Micsig is a great higher freq probe. The Kaiweets will be great for line powered projects!

[@bobomomo3764]

It doesn't have DC options right? HT208A On aliexpress the picture says it has both AC and DC, that picture didn't look legit to me

[@leonguyot4991]

I already have one of their Digital Multimeters HT112B, and am so impressed with it, I've just ordered an MT208D

[@KissAnalog]

Thanks Leon for this great feedback! Let us know how you like it:) I think its a nice meter.

[@Onkel.Moetrik]

Hi Eddy Is it possible that you can test the amp function on the 206? In the low DC region. I have the Habotest 206D, and when I use the clamp in DC mode, it is far out! The accuracy is way off. When the load is 1.7 amp the clamp measure about half. This should be a lot better I have another Noname clamp meter, a bigger one, and this one measure all right even in the low region. I suspect that the challenge for these meters are in the low region, DC. I guess they are not really made for this? Onkel Møtrik

[@KissAnalog]

Great question! Many of these are rated to read very high current, so the low range is like 60 Amps. This makes for poor resolution at smaller currents. The question is - how small? There is also a technique to get a better reading. I showed this in an earlier video - but I can't even remember which one it was;) I'll do a video this weekend to show this;)

[@Domnu.]

I oscilated between ht208 and ut207B. I choose uni-t ut207b because it is etl intertek certified. I have LoZ, inrush, min/max, lpf but not temperature. It is cat3 1000v/ cat4 600v, 6000counts. I hope you wil have it for a video.

[@KissAnalog]

Fantastic clamp meters - especially at the price. Did you see this video: kzbin.info/www/bejne/eWrRmmeVl7GjiJo

[@TYGAMatt]

Off topic for a sec. Thinking of pulling the trigger on a Hantek CC-65, but a little worried about the frequency limit. Thoughts? Maybe the CC-650 is a better choice? Budget is not huge. Or any other suggestion?

[@KissAnalog]

Great question! Between the CC-65 and CC-650, I think it is a choice of current ranges and what you need there. I chose the CC-65 thinking that I don't need the higher current and I wanted better low current readings, and I thought 20kHz was not bad for the low cost. Have you watched my vids on the CC-65? What freq range do you want? The Micsig is more expensive but a very nice and wide bandwidth probe. Here's the link the the video: kzbin.info/www/bejne/qHSQhGuNmcuKZsk CC-65 link:amzn.to/3wB5Yuz Micsig CP2100B link: amzn.to/3wDf4qu Micsig CP2100A (lower cost but 800kHz): amzn.to/3euEj8z Let me know if you have any more questions and which you decide on;)

[@TYGAMatt]

@@KissAnalog Hi Eddie. Thanks for the links. Yes I've seen your vid on the CC-65. I'm looking to probe on dc to dc converters as they're fascinating, but the step up I just made (first ever successful boost converter) is running at 100kHz, so maybe too much for accurate readings in the CC-65. I'll have a rethink. Maybe I'll just have to string a yarn to the wife that I needed both in the interests of saving the world from climate change.... Or something like that! ;-)

[@TYGAMatt]

Hantek cc-65 just arrived. Excited to try it out when I get a moment

[@KissAnalog]

LOL I forget if I've used the CC-65 on one of my boost videos... I'll try it on my next buck regulator video;)

[@TYGAMatt]

@@KissAnalog well, just the first preliminary test looks positive. Measuring a 3V DC reference with a 3mA load and it's reading 3mA. Good start I suppose. :-)

[@milwaukee_69]

My eui 579 is a great meter for what it is good for hvacr trade and electric field

[@KissAnalog]

Thanks for the feedback! I have always wanted an UEi meter, and I think I have one still but can't find it right now. Great meters from a family owned business.

[@ats89117]

Thanks. Do you know the frequency response?

[@KissAnalog]

Thank you! Great question, but are you referring to the voltage or current, or are you asking about the low pass filter?

[@khybersafi9137]

In your opinion, would you say the HT208D is the best bang-for-buck clamp meter out there when it comes to price/features or do you prefer something else? Thanks.

[@KissAnalog]

Great question! Thank you! I do think it is hard to beat! I have a few meters that I purchased and will do a shoot-out very soon;)

[@khybersafi9137]

@@KissAnalog Awesome. Correct me if I'm wrong but the HT208D doesn't have micro amps DC correct?

[@wingerrrrrrrrr]

@@khybersafi9137 you're correct 👍

[@kilner79]

wow i notice you reply to all comments or do your best im looking for a clamp meter that will do very low ac dc and also frequancy but it must be able to do teh frequancy with the clamp as i only have acess to what i need to messure with the clamp i cannot get any acess to teh actual componants without detroying the item i need to to do 5khz to 50khz more than the max and less than the minimum is an advantage could you please offer some advice please as im finding it hard to find what i need and some are very exspensive thank you

[@KissAnalog]

Thanks so much! The problem with most current clamp type multimeters is that they are meant for 60/50 Hz power system measurements. You can get a relatively inexpensive current clamp that will work with your multimeter - given it will read the higher frequencies. Here's a video on teh clamp: kzbin.info/www/bejne/jnTFoH2knMiFbLc A relatively low cost but high-end multimeter that can do this would be what I show here: kzbin.info/www/bejne/j3nYqmWGjrOkbJo

[@AzfarHashmi]

Unit 208b or kaiweets 208d?

[@bernielhat9155]

Every video I see in reviews and comparing is they all seen to avoid capacitance testing with the large run start capacitors from or for HVAC SYSTEMS,

[@KissAnalog]

Great point!! I'll have to add that. Thank you!

[@bangharsin8122]

What are the advantages & disadvantages of HABOTEST 208D

[@KissAnalog]

I think you mean the Kaiweets 208D - right? This is a fantastic clamp meter that has both AC and DC current measurements, but it also does inrush current, and has LowZ - as well as a great display. I'll do a shoot out for clamp meters here soon. Here's the link to amazon, but if you go to my description and go to Kaiweets - you can use KA15 for the discount: amzn.to/3P5C2lD

[@hullinstruments]

Quick question… are most of the modern budget multimeters made by the same manufacturer? And then stamped with a different brand names? Because I’v noticed There are many meters, from a wide range of brands… But many of them look identical. Why is that? There are dozens and dozens of models with many different brand names, and many look identical. For example, the Aneng ST209 is identical to…. -mustool X1 - winapex 8202 And others Other brands included including kaiweets, bside, uni-t, habotest, voltcraft, and others. Wondering if anyone can shed light on this topic, and verify if they’re all made by the same manufacturer, with varying levels of quality control?

[@KissAnalog]

This is a great question, and it would be awesome to see some answers to this. I can tell you that it is not just the lower cost units that are rebadged. I have a Tektronix power supply that is made by GWInstek. It goes even further than that as some manufacturers will have their high-end equipment made in the US and their (what should be low cost) lower end units made in China or other countries. Not saying any of this is bad - if the cost savings is passed on to the customers. I do think that Habotest might be the manufacturer of the Kaiweets multimeters. Power supplies are probably made by someone else. I think with Kaiweets, they have a name and sell a lot of equipment, so they have to keep a level of quality to keep the level of expectation for the cost a plus for the consumer - or they will be replaced by another brand. But they seem to be doing a good job.

[@wingerrrrrrrrr]

@@KissAnalog if there's additional screening by Kaiweets with a warranty period, it might be a good consideration for any price difference with Habotest, if they are sold without warranty support.

[@surfreadjumpsleep]

Does anyone know how the fuyi fy219 compares to the kaiweets/habotest wrt inrush current?

[@KissAnalog]

Thanks for the great question! I have this meter in the box so I’ll do a comparison;)

[@surfreadjumpsleep]

@@KissAnalog That would be great. Here in Hungary the Kaiweets is called Habotest & is available from aliexpress. Also available is the Fuyi with a little bit better shipping times promised.

[@KissAnalog]

Thank you for that feedback! Wow! Great to hear from our friends in Hungary!

[@surfreadjumpsleep]

@@KissAnalog Just one friend, but I'll mention it to other geeks I may find. Only problem, I can't speak Hungarian!

[@surfreadjumpsleep]

@@KissAnalog I'd guess it'll do fine for most things. The inrush DC current is what I'm curious about. If it works as well as the 208D then I'd buy it as it's cheaper.

[@Dansk55]

I think I'll go with Uni-T UT210E seems better built quality and costs less now

[@KissAnalog]

Thanks for this idea. It is a great option especially for lower current measurements. Here's a link: amzn.to/3FlxwIU

[@georgedavall9449]

I know I know, late comment here. Kiss Analog is electrifying !!!!!!!!!!!!!!! 🤩 😆👍☺

[@KissAnalog]

Thanks so much! Never too late;)

[@georgedavall9449]

@@KissAnalog You alright, Eddie, ya know! 👍

[@MrRubenrivera9649]

I want model that reads ac/DC amps and inrush current I think it is the 208d

[@KissAnalog]

Yes that is correct;) Let me know how it works for you. I like them very much! I might be giving one away soon. Since you are a sub you will be on top of the list if you are interested?

[@MrRubenrivera9649]

@@KissAnalog yes I am interested just to try it sir and you do great videos of meters

[@KissAnalog]

Thanks so much!

[@ericgee6585]

Please remove the protective film from the displays, it can make a difference.

[@KissAnalog]

Thank you!

[@Kilgorebass7]

Codes used up ☹️

[@KissAnalog]

Thanks for letting me know, I'm checking to see if I can get more...I'll post on this video if I get them;)