In this video, I demonstrate a few cool tips and tricks you can do with your biscuit joiner. Some you may already know, some you won't!
Пікірлер: 221
@zerocool23522 жыл бұрын
This was far more informative then all of the "biscuit joiners bad" videos. Thanks for the tips!!
@henaken08 Жыл бұрын
Very smart tips, you've spared me years of straining 😂😂😂
@Deanferreira23 жыл бұрын
I usually don't comment but wanted to thank you for sharing your ideas. "ATTA BOY!"
@GuysShop3 жыл бұрын
You are so welcome!
@thesjyoungjr3 жыл бұрын
Guy it's been to long since we have seen you. Thank you for showing the tips.
@MrRsg993 жыл бұрын
Thanks for all the great tips! I never think to use my biscuit joiner. Will try to use it more often.
@GuysShop3 жыл бұрын
Glad it was helpful!
@blandry0213 жыл бұрын
Well I did learn something, 5 things about biscuit joiner. And Ive owned one for 30 years. Thanks
@GuysShop3 жыл бұрын
Sweet!
@jamesprocter1023 жыл бұрын
Wonderful tips you have been a blessing to my shop learning
@ryderscustomcreations36653 жыл бұрын
These tips videos you’re doing are awesome. I love build videos, but these teach me so much it’s hard to say what I like more. Thanks Guy
@GuysShop3 жыл бұрын
I wish I had more time to do build videos. Glad you found the info useful!
@stevecollins94503 жыл бұрын
Great tips there, Guy. Thanks.
@MoGhotbi3 жыл бұрын
Great pearls of wisdom. Thank you.
@GuysShop3 жыл бұрын
My pleasure!
@tcbridges2 жыл бұрын
This was a real learning experance thank you. Want more. I saved this ti rewatch it overand over.
@FredMcIntyre3 жыл бұрын
Thanks for the info Guy! 😃👍🏻👊🏻
@frankcornfield59152 жыл бұрын
Fantastic instructional video from a master.
@jccbsl13 жыл бұрын
Excellent video! I've never explored creative uses for my biscuit joiner. It may actually get used more than once a year now!
@GuysShop3 жыл бұрын
Wonderful!
@drochon66723 жыл бұрын
I use my biscuit joiner a lot. Thanks to this video, I’ll be using it more.
@GuysShop3 жыл бұрын
Very Cool!
@betrickey8 ай бұрын
Great video!! I have been using my biscuit jointer for years and i am always looking for new ways to use it.
@BlessedLaymanNC2 жыл бұрын
I love how you made the slot in the board for the shelf. I can't help but think that you could use it to make a spline joint. For a hidden joint, you could stop before you get to the end of the board like the end where you started. For slide on shelf, you could cut a partial inside the cabinet and add the spline. Then, use the shelf you cut in the video to slide over the spline. Depending on the use of the shelf, it may not need to be glued so it can be removable.
@BCFoolin Жыл бұрын
Great information! Thank you!
@Joe_Veno3 жыл бұрын
Good stuff Guy! Enjoyed this. Make more of these tip videos. 😎👍
@ericcommarato77273 жыл бұрын
Glad to see the biscuit jointer back in action. Seems like everyone is tossing them for the Festool Domino.
@GuysShop3 жыл бұрын
They both have their place in my shop
@framing2finish3 жыл бұрын
Great video. Lost track of how many tips I learned.thanks, Subscribed!
@cescone9993 жыл бұрын
I'm a beginner on woodworking and this is a super useful video for my Makita ! Thank you ! Ciao from Italy
@GuysShop3 жыл бұрын
Glad it was helpful!
@kachboubou833 жыл бұрын
Awesome tips. Thanks very much
@g-dadsworkshop85033 жыл бұрын
Love these tips. Very clever. Thanks Guy!
@GuysShop3 жыл бұрын
My pleasure!
@ralphlivingston8943 жыл бұрын
I learned a lot. I especially liked the 180°/90° use on mitered corners. I had not seen that before and it was an eye-opener. Usually, A slot for a spline is cut on the tablesaw using a homemade jig. For me, your technique is much more doable. Thank you so much! (I love learning new stuff)
@GuysShop3 жыл бұрын
Glad you enjoyed it!
@a9ball1 Жыл бұрын
You had a couple in there that I didn't think of. Thanks 👍
@neilf41283 жыл бұрын
Wow! It's been a while since I've visited your channel. But what an impact. Such simple tasks with huge affects. Thank you so much for sharing this.
@GuysShop3 жыл бұрын
Glad it was helpful!
@ReferenceFidelityComponents Жыл бұрын
Great set of tips Guy. Been a speaker maker for years yet never tried these tips as I’ve usually used a router jig and router to form grooved joints fir internal bracing and glued up everything in one go which is tricky. This looks to be a great alternative
@grayharwood Жыл бұрын
You should showcase your work on YT
@wb_finewoodworking3 жыл бұрын
Those are some great ideas. This is a video I’ll need to come back to in the future. Thanks Guy.
@GuysShop3 жыл бұрын
Glad you found it useful!
@MrJohnnyboyrebel3 жыл бұрын
Clever tips! Thanks!
@GuysShop3 жыл бұрын
Glad it was helpful!
@flix4u3 жыл бұрын
GR8 tips thanks
@lanceravenswood8073 жыл бұрын
And now I’ll buy a biscuit joiner, and some cookies, thank you very very much.
@GuysShop3 жыл бұрын
HaHa
@Simplecove3 жыл бұрын
Those are some awesome tips! I've never owned a biscuit joiner before but may need to investigate my options. That zeta sure is a nice one!
@GuysShop3 жыл бұрын
Glad it was helpful! Save up your sheckles!
@s.dawson24902 жыл бұрын
That's a great video. 5 different and useful tips. Thank you
@andrewpinson43603 жыл бұрын
Good to see you back making videos. I might have to dust off my BiscJ and put it to use. It does have a use in the shop.
@GuysShop3 жыл бұрын
Please do!
@essextwo Жыл бұрын
Super helpful. Thank you. 🙏
@HomeImProveMentHow2 жыл бұрын
*Excellent information, Thank you for sharing Your Tricks Of The Trade.* I also enjoyed your Vanner video, and *I Shared a Short Clip to Facebook Facebook.* I look forward to hearing from you by for now Ken
@DreamWorksWoodShop3 жыл бұрын
Hi Guy, Enjoyed the tips with the biscuit joiner. Thanks for sharing! 👍
@GuysShop3 жыл бұрын
Glad you enjoyed it
@stewartmcmanus39913 жыл бұрын
That was great, learned heaps, thanks.
@GuysShop3 жыл бұрын
Glad it was helpful!
@mykolashatkovskyi88172 жыл бұрын
It's frkn magic! Kudos!
@colinmead89962 жыл бұрын
FANTASTIC real practical ADVISE ☝🏻✅💯 Never thought before to do deciders that way & also reinforcing vis fave & edge splines 👌🏻🚧👋🏻THANK YOU MATE
@realworldcarpentryremodeli58683 жыл бұрын
Awesome tips. I will definitely be using them. Thanks!!
@GuysShop3 жыл бұрын
Glad you took something away. Thanks for watching!
@francoisbeaudry4 ай бұрын
So useful! Thank you!
@GuysShop3 ай бұрын
Glad it was helpful!
@mustangeek3 жыл бұрын
I just got my first biscuit joiner a week ago good info to know.
@GuysShop3 жыл бұрын
Glad it was helpful!
@montewoods47663 жыл бұрын
Great tips as always. Thanks
@GuysShop3 жыл бұрын
My pleasure!
@myenjoyablehobbies3 жыл бұрын
That is some really smart thinking. Thanks for the excellent tips on using this tool.
@GuysShop3 жыл бұрын
Glad it was helpful!
@EvanDunville3 жыл бұрын
I certainly learned a few things on this one!
@GuysShop3 жыл бұрын
Thanks for watching!
@markneurohr96633 жыл бұрын
Outstanding!
@GuysShop3 жыл бұрын
Thank you! Cheers!
@shawnjohnson7696 Жыл бұрын
Great Video!
@practicallyIndependent3 жыл бұрын
Wow, that last tip is going to make.my next project so much easier, and more enjoyable. Thank you!
@GuysShop3 жыл бұрын
Glad it was helpful!
@rudychavira5558 Жыл бұрын
Wow I dream of being a good carpenter, ended up painting, that was a great video thanks for info
@scottb.20223 жыл бұрын
Another one is using it to cut the slot for Z clips that are used for holding table tops to the base.
@jaimearango67123 жыл бұрын
Please
@wayneblythe57133 жыл бұрын
Those are brilliant tips and tricks, cheers 👏🏻👍🏻🇬🇧
@GuysShop3 жыл бұрын
Glad you enjoyed it
@judas5873 жыл бұрын
It's been too long since I saw you . What a great surprise to see you
@GuysShop3 жыл бұрын
Thanks for stopping by!
@LostMountainRestoration3 жыл бұрын
Great job. Thank you!
@GuysShop3 жыл бұрын
Thank you too!
@osvaldocristo3 жыл бұрын
Cool - thanks for share!
@GuysShop3 жыл бұрын
Thanks for watching!
@johndee18553 жыл бұрын
Over the years I’ve got caught with pocket holes ... really the keg jig .... but this vid .... really got me.... pulled out the biscuit cutter and it’s back in the truck...
@GuysShop3 жыл бұрын
I love my biscuit joiner!
@ramaroodle3 жыл бұрын
I knew that jointer was good for other stuff, especially the shelf. Thanks!
@GuysShop3 жыл бұрын
You bet!
@TheFalconJetDriver3 жыл бұрын
My only concern is that using the biscuits the biscuit is holding the entire load load, this would be good for light weight item on the shelf.🤣🛫
@warrensmith29023 жыл бұрын
#1 Genius #2 Gonna order some of those K20 biscuits #3 Never thought of that #4 I did not know that #5 I new that one. Great tips.
@GuysShop3 жыл бұрын
Thanks for watching!
@HadalLord3 жыл бұрын
Awsome tips! Your the man!👍
@GuysShop3 жыл бұрын
I appreciate that!
@thisandthat1763 жыл бұрын
I learned something. Thank you!
@GuysShop3 жыл бұрын
Glad it was helpful!
@plumblifeatl64332 жыл бұрын
Great video
@rodpotts26663 жыл бұрын
Great information Guy!
@GuysShop3 жыл бұрын
Thanks for watching!
@cbrSpeedster13 жыл бұрын
Some good tips Guy... especially the shelf trick.. Nice.
@GuysShop3 жыл бұрын
Glad you liked it!
@mmlips3 жыл бұрын
Very cool ideas Guy! Thanks.
@GuysShop3 жыл бұрын
Glad you like them!
@joshuatharpe93973 жыл бұрын
SOOOOOO HELPFUL!
@GuysShop3 жыл бұрын
Glad you liked it!
@40redfox402 жыл бұрын
Excellent
@kristophermarsh94003 жыл бұрын
Well done, good video, good target topic, very educational. Thank you I learned a lot.
@GuysShop3 жыл бұрын
Glad you enjoyed it!
@tonya3683 жыл бұрын
excellent Guy!
@GuysShop3 жыл бұрын
Glad you liked it!
@mfwoodshop3 жыл бұрын
Great tips Guy thanks
@GuysShop3 жыл бұрын
Glad you liked it Mike!
@kevinbradley29413 жыл бұрын
Great video. Thanks.
@GuysShop3 жыл бұрын
You are welcome!
@gerrygolder75373 жыл бұрын
Thank you great tutorial
@GuysShop3 жыл бұрын
Glad it was helpful!
@PPMOCRG3 жыл бұрын
Thanks Guy!
@GuysShop3 жыл бұрын
Welcome!
@ValioMadre73 жыл бұрын
Gracias Guy.
@GuysShop3 жыл бұрын
Thanks for watching!
@jimmyfavereau Жыл бұрын
Thanks Guy :D
@sdcofer523 жыл бұрын
Pretty good demo.
@GuysShop3 жыл бұрын
Glad you liked it!
@IEnjoyCreatingVideos3 жыл бұрын
Great tips Guy! Thanks for always sharing the videos with us!💖👍👌😎JP
@GuysShop3 жыл бұрын
thanks for watching JP
@IEnjoyCreatingVideos3 жыл бұрын
Your very welcome Guy! Have a great week!😎
@michaelsqaureseverything32553 жыл бұрын
Thank you for this post
@GuysShop3 жыл бұрын
You're welcome
@calvinloi84133 жыл бұрын
That’s a cool tip with the slide in shelf. Turning the joiner into a router.
@GuysShop3 жыл бұрын
Glad you liked the tips!
@brianoneill3503 жыл бұрын
Really good thanks
@GuysShop3 жыл бұрын
No problem
@ivanwalker35223 жыл бұрын
Kewl x 5 x infinity. Keep 'er lit Bro!
@GuysShop3 жыл бұрын
Thanks! Will do!
@josephKEOarthurАй бұрын
Nice.. using this as a makeshift router. For the shelving… !
@GuysShopАй бұрын
Great idea!
@tomtimmons22283 жыл бұрын
Brilliant
@GuysShop3 жыл бұрын
Thanks!
@jcsrst3 жыл бұрын
Ok, I'm not going to sell my biscuit joiner. Those were great tips!
@GuysShop3 жыл бұрын
The biscuit joiner can solve a lot of problems. Keep it!!😀👍
@davecurda23503 жыл бұрын
Nice to see a video from you.
@GuysShop3 жыл бұрын
More to come!
@davecurda23503 жыл бұрын
GuysWoodshop happy to hear that as you are a great craftsman and I really enjoy your work.
@skipclark95213 жыл бұрын
Great video. Next one should be on the Zeta P2.
@GuysShop3 жыл бұрын
Great suggestion!
@huejanus55053 жыл бұрын
Very good tips and tricks.
@GuysShop3 жыл бұрын
Many many thanks
@marcosdallasguy13133 жыл бұрын
What a nice pencil. Nicely sharpened.
@GuysShop3 жыл бұрын
Thanks!
@johnnestor73863 жыл бұрын
Thank you
@GuysShop3 жыл бұрын
You're welcome
@Tilburger723 жыл бұрын
Nice. Unfortunately the Zeta P2 is expensive for a hobbyist like me but I see the advantages of a biscuit joiner
@GuysShop3 жыл бұрын
Yeah, the Zeta is not really for the hobbyist, however this video was all about techniques, and can be done by any biscuit joiner
@weekendwarrior95703 жыл бұрын
excellent
@GuysShop3 жыл бұрын
Thanks!
@quovadis51723 жыл бұрын
Hallo Guy. Great to see you posting again. Great tips too. How would you flush trim the raised solid front face to the panel? Currently I am using a palm router with a flush trim bit, but find that I am not really getting the accuracy and tight tolerance I am after?
@GuysShop3 жыл бұрын
I use the small Dewalt router with a3/8" flush trim bit
@BarbaryStudio3 жыл бұрын
Very informative video i will buy this machine
@GuysShop3 жыл бұрын
Good choice
@constantinosschinas45034 ай бұрын
Is there any advantage to the joiners that have the separate 90degree fence? Because the cannot be used flush without removing the fence, which is a great pain. Great video.
@BigmoRivera3 жыл бұрын
Great Job Nicely Done 👍🔨📐
@GuysShop3 жыл бұрын
Thank you! Cheers!
@bunkersaver49803 жыл бұрын
Hello Guy, great work as always. I asked this question on another video, but this technique should work with the domino?
@NomadMakes3 жыл бұрын
Really great video. I don't have a biscuit jointer, but this video made me consider getting one. Thanks.
@NomadMakes3 жыл бұрын
@@SuperBowser87 Well. I was not considering the Lamello. But one of those 25-30 dollar ones... ;-)
@omerkeinan47843 жыл бұрын
As always a great teaching video. Is the first tip applicable for miters that do not add up to 90 degree? Thanks!
@GuysShop3 жыл бұрын
I would think so and it would really be dependent on the angles you are trying to join
@donaldguilbault74333 жыл бұрын
The Lamello fence has a 45 degree notch designed to register off of the outside point and locks in really nicely. Also Lamello makes a clamping biscuit that transverses a miter. (E20-L & E20-H) Colonial Saw is an imported of Lamello has great tutorial videos of all products and biscuit joiners.
@GuysShop3 жыл бұрын
I am very familiar with the notch and also the half biscuits for clamping. I wanted to do tips for every biscuit joiner, not just the Lamello. This is meant for everyone.
@donaldguilbault74333 жыл бұрын
That's kind of what I figured but I didn't know if you were new to the Lamello yourself.
@ginoasci28762 жыл бұрын
you missed one that goes inside the miter. nice biscuit jointer you have there. i’m so tempted to get one, at $1300 is that the Lemello Zeta P2 ?