50mph Electric Razor Scooter!! - ARC200 Motordrive Setup

I'll be making a more detailed video on the blue Razor scooter soon!
Razor E300 parts: www.thingiverse.com/thing:459...

[@derjoh1986]

Following the instructions on the video seems overwhelming at first, yet fantastic! Hope to try this soon! Thank you so much for sharing this!

[@onjofilms]

dat steering column at 50mph though

[@danielwgk]

And here i am looking for options for the new power wheels racer build. Looks like this is on my radar.

[@MasterTuttoo]

love it, can u list the parts for the razer scooter and the Cad files. I have one laying around and would love to make it electric

[@johannespre6912]

Great video. It's pretty inspiring ;)

[@TacEsk8]

I will be doing this, hopefully in the couple weeks. Is there any better alternative for the arc? ESC

[@Dohko7777]

They are great, please do the Razor E-XR scooter battery and speed upgrade, I think it has potential, thank you.

[@stevenditzler1346]

Gotta love the pit vipers

[@harrison00xXx]

I had as a was like a kid also a scooter with tires and suspension. As my 1:5 onroad RC car was unreliable(tires impossible to get, broken/leaking diffs, special bearings around the drivetrain got worn out...), except for the 32cc 2 stroke engine with sport exhaust and around 12k rpm max, i also built this on it- but i was already happy with around 2 kw at regular mix, maybe 3 kw and much rpm more with a lean mix and a max speed of around 40 km/h. But you triggered me to watch some auctions on fast E-bikes with damaged/missing batteries, drivetrains or whatever bring me to a cheap motor and ESC, i will upgrade my old scooter, full of spider web since its in any corner since years.

[@agawdsparadise3782]

Did he ever make a more detailed video on the blue razor scooter cause I'm trying to upgrade the teo I've have catching dust for damn near 15 years haha

[@kimlindblom6964]

All in all, what does that blue minimalistic scooter cost to build?

[@Ninjutushi]

300$ esc, around 200$ motor, I guess around 500-600$ for battery (or more, it has bms integrated), throw in at least another 100$ for everything else...

[@harrison00xXx]

first of all, you dont need a 8 kw brushless motor.... i got only a 2,x kw 2 stroke engine on my scooter (DIY, what else) from an older 1:5 RC car with some parts from an older bike, this project cost me close to nothing, since i had all parts except small, very cheap things. without altitude increase, it could go around 40 km/h, with a lean mix close to 50. acceleration was also ok as the engine came closer to resonance with the exhaust As you may know, with a brushless motor, you got all the way more power also with low rpms. 3kw+ should be enough for a scooter, but yeah, i bet 8 kw are funny :) you could even run a scooter nice with a Mamba Monster 550 sized engine (like in E-Maxx brushless, its really a monster, especially for a 1:8 rc monster truck), all you would need is some sort of extra air cooling(for long distance and much torque) and maybe avoid starting from zero (hard work for ESC). Biggest problem at all would be, you cant brake with ESC and get energy back into the batteries with this RC ESCs, breaking means energy will be wasted by ESC (and heat it up). ESCs with retrievel are more expensive i think, but correct made, i think they are also longer lasting (damn i broke 3 ESCs in my first rc bl racing car, since i used aggressive settings for peak performance, later 3S instead of 2S batteries but normal timings, better performance, less stress for ESC) I also though about using this monster RC brushless for it, but i love this car so much, i passed already cars, driving 70 km/h+, on a parallel (car-free!) road with 110-115 km/h, you cant imagine the faces of some drivers/passengers, seeing such a fast (not for road made....) RC car passing them, while nobody know where i am since i use a gopro connected to FPV-transmitter and a screen with internal receiver cheap from china ( i cant afford FPV googles, and i also dont like them at all) Not to mention backflips from standing still or high jumps :)

[@yellowgoose5043]

I'd say about 1k

[@NoahZimmerman]

Can you connect a display/ voltage meter with the arc 200?

[@madyicstik]

what year honda civic did that steering motor came off of?

[@scottegolf2509]

I cant find the arc200 anywhere for sale, will you be bringing it back?

[@j0hncon5tantine]

same here?

[@BobMcCoy]

*Elon Musk has joined the chat*

[@thomascotten212]

lisa

[@supergenius5267]

Thats fast scooter damn😱

[@Roger_Eide]

It would be cool if you made a video about the electric stool:D

[@ianbrown2728]

loling at the style points

[@FrenicX]

I can't find the ARC200 unit for sale anywhere. Has it been discontinued by freefly?

[@TacEsk8]

Same i don't see it

[@madyicstik]

anychance the 3d printed pulley stl files for the blue scooter can be shared?

[@isaaclyonsf1]

Awesome!

[@josephcarreon783]

Where can get the razor back wheels pully? Thanks

[@davidbuljubasic2624]

What I would give to own one or be able to make one just been hard with helping mom recover from injuries and bills 😪 ur awesome love ur videos

[@joshphillips452]

Were have you been dude straight up.

[@michaelmarlatt2961]

I want to do this to my Razor electric dirt bike!

[@HighMileageOffroad]

Will the arc work with a 3000w 72v brushless motor?

[@MrMichaeldwatson]

Still waiting on that build video!

[@themagicphoneboothq4529]

Holy shit with the blue one you have to upgrade the breaks

[@bobbymulwee7641]

Where do we get the parts? Do you guys have a parts list?

[@davieanwilliams9205]

Wish me luck ? I have razor. Want to pt 3000 watt 72 v motor but run the €£*t @ 96v will it blow up or is that number still in same volt range were its safe tell me please thanks

[@jamesfischer9590]

Does anyone know where i can find the 3d print model for the real HTD 5m pulley? Im currently doing this similar setup on my e300 but using a Turnigy burshless motor.

[@NoahZimmerman]

Hey! Did you ever find/make a file for the pulley? I’m doing the same setup right now, but I can seem to get my steel rear pulley to mount on the rear wheel, so it would be great if I could get this file.

[@LChow-xq3xm]

How about listing the websites where you got everything to build the scooter?

[@thirtythreeeyes8624]

Are you familiar with google?

[@NoahZimmerman]

No but seriously. We would like to know what batteries and motors he used in his project.

[@robspear03]

@@thirtythreeeyes8624 Are you familiar with common courtesy? I expect not. Raised in a barn, must be an ass.

[@thirtythreeeyes8624]

@@robspear03 You're the one calling people names. If you want to learn something do some research, if you can't you're gonna have a real hard time assembling any form of electronics and I would question your ability to be dealing with something that can blow up fairly violently. If you need someone to explain every part how they work and how to assemble them maybe this isn't a hobby for you and you should buy premade stuff.

[@TheDirtyfax]

I have the Polaris 707 PaceLite type. I need help. I have your ARC 200 controller. I need to know how I can get it to 50mph. I have two 30ah 60 volt batteries. One in a bag on the rear carry rack and one E-Bike frame battery on the front of the steering tube. I don't know what motor or what sprockets to use or even how to get them. But I am willing to do whatever to make 50mph happen.

[@P8FPV]

Dam n i thought building n setting up a race drone was hard!!

[@MyDadWorksAtMarcs]

are there any for the E200?

[@28th_St_Air]

is that a faux fur honey badger jacket @ 1:07 ?

[@schmudge]

One on each Foot, Do you have Size 16US

[@JoeOvercoat]

Wear gloves boys, right along with that helmet.

[@MsSomeonenew]

For 51mph scooters full protective motorcycle gear should always be present.

[@Taylor-gm8je]

Did he ever make an other video on the razor scooter?

[@osheathedj]

Super cool! Making e-scooters that cost as much as actual motorcycles! Talk about panty droppers! Why didn't I think of that!

[@smp1990]

was an awesome idea till i saw $300 for just the esc lol

[@ksc1406]

These things probably only cost like $500-$1000 to make... That's a pretty cheap motorcycle, just saying.

[@NoName-dn8nv]

where can you buy these. I can only find the mfg's site online but no retailers

[@thefortressishere]

DAN. Can you do a video on the E300 build tutorial please. That's what us guys really would like to see. Also if you can put links to all the parts used then we we purchase from your link. Thanks Dan. I've just spotted you're doing a detailed video on the E300. Brilliant 😁

[@dylanbenker2043]

Can you share the link I can't find it

[@thefortressishere]

@@dylanbenker2043 he hasn't done it yet mate. I just realised at the end of this video he said he'll do a detailed video on the E300. He's just no done it yet. Hopefully soon though.

[@NoahZimmerman]

Earthly Wanderer hopefully soon......

[@sambailey8378]

I guess there never was a separate video about the razor scoote? Please can you publish the CAD files for the Razor belt drive setup!

[@rctestflight]

Its in the description

[@ksc1406]

Does it fly though?

[@BirdRunHD]

lol, brilliant!

[@Nicklytical]

wow I wished I could do this to complicated I would use it for a razor

[@kevin42]

Does an ac induction motor need to be sensored to work with an FOC-ESC?

[@LoopsZ]

No there are sensorless foc controllers

[@kevin42]

@@LoopsZ figured it out eventually.

[@mike_oe]

Nice tutorial, but expensive motor driver. I suspect the VESC does exactly the same thing for 1/3 of the money.

[@MsSomeonenew]

Like most products the good ones cost a good chunk of money, or you can take your chances with cheap ones and hope they actually perform what their rating said and they don't burn out too quickly.

[@harrison00xXx]

between ESCs are big differences I have already seen cheap scooters, with not that bad performance, but a very small ESC and bad cooled. It wont last long. its always a good advice to choose an overpowered ESC, since it will last "forever" if you dont set wrong parameters for timing and so on. But for a scooter you will always prefer smoothness over agressive timings for some rpm or a little bit more torque, so it should never happen that you stress your ESC too much with a scooter, except for long usage and permanent half throttle. brushless ESCs love 2 states: 100% throttle, or 0% to a very little amount of throttle(like 10 or 20%). permanent 50%-80% is the worst thing for it, or at least the most stressful for the ESC itself

[@debianlasmana8794]

Do this for electric longboard

[@frogs84ss]

Need a complete build video on the e300. Links to parts. Awesome!

[@jondanimal]

Frog84ss I’m still waiting for this video they promised!

[@NoahZimmerman]

And it is 2019 and I am still waiting.......

[@jondanimal]

I don’t think they realize how badly we want a quality E300 build lol

[@NoahZimmerman]

jondanimal- but I also don’t want to spend $800+ on a $200 scooter...

[@jondanimal]

Noah Zimmerman I've spent more on dumb things 😂 my E300 is pushing around 1500 watts and goes 30mph but I'd like to get faster.

[@CommoMike]

Here's what I heard.... blah blah science. science, science... FASTER!!! LOL Thanks for making this Daniel!

[@stofffpv3128]

lol

[@ThatsToughTV]

Can I buy one?

[@trxncxt1281]

How much for someone to do this for my scooter

[@irritantno9]

link is broken for the store.

[@T-Sav]

A* video mate,

[@eliassegelstad9859]

Witch motor did he use

[@jackhandy4406]

Lies!!! It's been a year!!! Please make the blue razor scooter vid!!! Plz pls please!!!

[@jonscot8393]

@rctestflight are you going to stand by and let this happen? .... Worlds FASTEST Electric Rollerblades

[@clippedwing-bensmith1614]

*what is regen throttle, it sounds like magic*

[@mike_oe]

Regenerative. Using brake energy for charging the battery.

[@electromechanicalstuff2602]

Must have been quality products since the ESC is no longer available

[@NSAwatchesME]

I'm confused because this is same video on freefly channel

[@dirtyfax]

Hello, I have a Polaris scooter like in your video. So-far I have an ARC200, an Alien 80100 6kw 130kv motor, and a 52 volt 20ah battery pack. I'm wanting to get it to a 45mph....(or better) scooter. I have just started the project. I put a heat sinc with two 2" 12 volt fans to be powered by a 60 to 12 volt converter. Hoping this keeps the controller cool. I may have to move the rear shock mounts back and also the 80mm motor to make room for suspension travel....don't know about that part yet. I'm wondering if you could help me with pulleys and belt sizes to achieve this? I think you guys are the perfect ones to contact for help being that you already specialize in modifying the scooter I have. Can you help me out? I can ship it to you if necessary. Actually I would prefer to do that if you're interested. I can make a road trip to being it to you if you're within a reasonable drive distance.

[@dragonfiber1038]

where did you get the controller, arc200, from?

[@dirtyfax]

I ordered it from the manufacturer

[@Nohoze]

Did you get this running? I have the same scooter, and am pretty sure I fried the hub motor I put on it.

[@TheDirtyfax]

@@Nohoze no I can't get any help from these people.

[@Felisargyle]

Is this your product ?

[@davidwichner2018]

Thats a superscoot ;)

[@ianbrown2728]

Im having a hard time finding that 80mm out runner 8kw motor

[@alexecheverria]

At alienpowersystems they have similar but not the same. Expensive things.

[@AllenIverson4MVP]

Lol imagine driving this on a rocky road

[@GraceTheTDI]

my 2 ATVs go 50 and 55. How tf

[@tonyjansen843]

I’m jealous of this guys voice. I’m 22 and still sound like a “boy”.

[@gymkhanadog]

Geezus that thing (the controller) has to be expensive given that the manufacturer doesn't run a public e-store and doesn't publish the price.

[@o0julek0o]

I love you and your channel, but lemme guess, I can't afford the controller...

[@WereJoebin]

do electric skateboards

[@paramandans]

OH hell no "F" that shit. A solid hard frame with no suspension you can keep it. Get a Zero ten or turbowheel lighting.

[@christophercain7343]

Surprising he can go so fast considering the immense weight of his gargantuan balls

[@Baldys_projects]

😂 fucking great!

[@jackhandy4406]

CLiCK BAiT!! THey DON'T show the Motordrive Setup for the razor!! Which is in the title!!

[@thekaduu]

Have you heard of "operating a vehicle without registration"?

[@Wearyman]

So obviously this makes your scooter REALLY fast. What about range? Being able to go 50mph for all of 100 yards is.. well... Less than useful. Unless you are doing Scooter drag races, of course. I'd like to improve my son's E300 and maybe give it a small speed boost but give it a BIG range boost. Do you have special settings for that, or do you need different kit?

[@Hexalyse]

He said 15miles range, at some point in the video.

[@nocturnaladventureshunting8579]

@Skotthas Dafever razor is its own brand

[@djilly75]

why are the comments disabledin the fpv car chase video? and why and how are you flying with an antenna on your goggles????? weird . and now hes not into fpv anymore????

[@marc_frank]

Regen is rain in german

[@olsonspeed]

Sorry to mention that your scooter is illegal to use on public streets, bike lanes or trails. Assisted bicycles are legal.

[@nocturnaladventureshunting8579]

Buzz killer

[@liambowers666]

Next time you do a piece to mic, please use a pop-filter! Hearing mouth noises is really hard to listen to. Otherwise, really cool to see!

[@ambroseabellair5306]

Why can't we just use the throttle we already have, what possible difference could that make. You know brother, use what you got, increase the out put great, but why buy what you already have.

[@MsSomeonenew]

That would depend on what the existing throttle does, they don't all work the same way.

[@ambroseabellair5306]

I have the razor motor and speed control, but it's on the eco smart scooter.

[@hanoverview]

or i use a VESC - Open Source ESC for 100€ and buy 3 of them for the same price ... ughh

[@ahaveland]

Not everyone has the skills, the time, the knowledge or patience to build a scooter, or any other EV. Also you get a guarantee and someone to call if it goes wrong. This is what you're paying for, so don't knock people trying to bring a service to people and earn a living.

[@hanoverview]

Ughh thats the Apple and DJI mentality and i HATE IT !

[@ahaveland]

I do too, but we're not the only people on the planet. I can build my own too, but not everyone can.

[@tailblade1733]

Can you give a source of the ESC that you are talking about?

[@dauntlessfpv]

Bruh $300

[@dontdomeboo81]

This build are for people who do this as a hobby and have money to 🔥 burn. PeriodT... But it is cool.. Im not worried bout the speed im worried about battery life! Range

[@Buffetology]

This is a $69 dollar VESC that you changed the name as now call an ARC and sell for 300 dollars. You would be more successful if you sold the pulleys and gears rather than stealing open source technology and changing the name

[@tailblade1733]

Can you give a source for the VESC that you are talking about please?

[@TacEsk8]

I need more info

[@eebydeeby69420]

you need to be a little safer, wear some gear

[@MrGiodude17]

Lol sillly hahaaaaaa

[@DizzyDad]

Great topic, but blah blah blah with your delivery tone

[@Fritzenlab_Br]

Your voice in this video was almost an invitation to take a nap. Too soft and slow for a youtube video!.

[@robrichert8830]

.