580 Channel Update. Just Mowing The Grass. Kubota LX2610 Tractor. FDR1660. STIHL String Trimmer 4K

Got out to cut the grass before the long weekend. A few channel updates for you and I answer a few subscriber questions while getting 'er done in time for the weekend! Happy Canada Day and Independence Day!
#kubota #tractor #mowinggrass
Check out my Website! www.gpoutdoors.ca
#gpoutdoors
@gpoutdoors
#outdoors_gp
JUFabWorks Discount Code for GP Outdoors Subscribers!
Order online and use Discount Code 'GP5' to receive 5% of any purchase at
www.jufabworks...
LogOX Discount Code for GP Outdoors Subscribers!
Order online and use the Promo Code 'GP10' to receive $10.00 off any purchase over $75.00. Free shipping in the Continental USA!
www.thelogox.com
Big Tool Rack Discount Code for GP Outdoors subscribers!
Order online and use Promo Code 'GP5' and get 5% off any purchase. www.bigtoolrac...
This video is not an instructional video. It is not a sponsored video. It is intended for entertainment purposes only. The creator receives no financial compensation from manufacturers for the production of this video unless otherwise stated.

[@paulfrizzell31]

😊Happy Canada Day😊

[@newhampshire-bob1604]

AS YOU HAVE GOTTEN OLDER, Gord! Say it is not so! I am 65 and still doing heavy work keeping Mother Nature back! Thank goodness I now have a tractor to do the heavy lifting! We built our house to not have any maintenance on the outside! Just power washing. Have to keep in mind the future!

[@GPOutdoors]

LOL! Great to hear Bob! Cheers!

[@skeets6060]

Gettin old is for the birds aint it :) ,,, Happy Dominion Day, stay safe

[@jimp.4531]

have fun with your family

[@georgecarter1725]

Good comments GP, right on in regards to maintenance.

[@PEI_Guy]

I agree with your theory of low maintenance for life in general. Why clutter your life with unnecessary tasks when you could be enjoying that time with enjoyable activities.

[@JBNetBreaker]

Cheers!

[@d.a.ballou9740]

Have a great Canada Day weekend GP! 😁

[@GPOutdoors]

You too DA!

[@donmcconnery5080]

Good advice Gord. Happy belated Canada Day

[@TheHobbyShop1]

Great point. I have too many to maintain currently. Happy Canada day!

[@GPOutdoors]

Happy Canada Day THC!

[@bj.roberts6410]

Hi Gord ... good video I totally agree with you.. if I could get away with all the machines and there maintenance I might get more done. My little place is hilly and flat and bumpy and sandy and swampy with trees. Lol. So I talked to your friends at Farmers Equipment picked up the chipper just about finishing setup. Thanks for the information...good stuff. Happy Dominion Day. Lol. Ok Canada 🇨🇦 day.

[@GPOutdoors]

Good stuff - congrats on the new equipment BJ! Happy Canada Day weekend to you and yours!

[@kevinbrewer2141]

Maintenance in equipment is the main factor in which tools I buy. If I can get away with one engine or motor I will go with that one. The older we get we get a little wiser.

[@ItsaboutMakingnotBuying]

Happy Canadian day GP. Have a fun and safe summer my friend. Later

[@GPOutdoors]

Hey good morning Mech! Happy Independence Day!

[@toddrabideau5576]

Enjoy the weekend with your family Gord!

[@samengler539]

Cheers. Happy Canada day GP

[@GPOutdoors]

You too Sam!

[@TheGardenerNorth]

Great video!

[@jh9855]

Hello GP. Thank you for your video. Less is more is my motto these days. I too would like to reduce equipment. But alas, each on piece of equipment a reason. The JD Z turn is awesome on hills mowing sideways, but it is very hard on the body as a person is mowing. I love the AC Kubota Cab on my tractor and would much rather use that as much as possible. Maintenance on the property is also a consideration. I cannot do as much as I could in my younger days. Have a great weekend.

[@dwayneloftice2326]

Maintenance is a big factor. Good decisions on what you have done. I'm BIG on maintenence procedures and equipment costs. And, another factor is maintaining from the "seat" or on my "feet". Seat time wins every time.

[@mp3625]

Maintenance becoming a thing to look at. But we do like our toys? Lol Happy Canada day Gord

[@GPOutdoors]

LOL! We sure do Dave! Happy Canada Day!

[@philipblass6544]

yep, how many toys can you drive at the same time.

[@RCAFpolarexpress]

Happy Canada Day GP 👍👌🍁 OUSTANDING Life Bio GP and YES Maintenance is THE VITAL FACTOR 👌👍🧐 Cheers 🍻🍻

[@GPOutdoors]

Happy Canada Day Dave!

[@RCAFpolarexpress]

@@GPOutdoors 🍁🍁👍👌✨🚀😇🍻

[@jimmcknight3021]

For our family property here in Western Arkansas, we had the resources to option up our Grand L. My biggest reason was we are getting any younger. Lol I love the convenience of a hydraulic top link, hydraulic ssqa for our OEM third function. Plus we have two other rear remotes for future Attachments. Happy Canada day to you and your family.

[@GPOutdoors]

That's great Jim! I am sure you don't regret the decisions. Have a wonderful Independence Day weekend with your family!

[@MyClutteredGarage]

Hey Gord. Good update. Happy Canada Day, my friend!

[@GPOutdoors]

Thanks Ed! And a Happy Independence Day to you and your family!

[@mitch_smith]

Great idea on recording in 4k. You are future proofing your videos for years, likely another 5 to 10 down the road, for people to be able to watch and it not look like 80's vhs footage to someone in say 2027.

[@GPOutdoors]

LOL! The '80's - now that was a fun time Mitch. Younger, big hair, big hair bands and mulletts.... my kids still make fun of my wedding picture. I kind of looked like Joe Dirt. LOL. But good times for sure - despite the recession. Have a great Independence Day weekend!

[@brucelarcombe3229]

Another excellent video GP, agree maintenance critical, but takes time. I work full time, run my own business, just spent a hour or 2 this morning, Aussie time, servicing, including the Honda ATV I use for work. Have both a B2601, MMM (better half prefers it) does most of the work, including the small paddocks, have 11 acres, and a ride on where the tractor cannot go. Keep up the good work.

[@GPOutdoors]

Thanks Bruce! It certainly does - but got to keep them running. Have a great weekend and all the best mate!

[@TonysCoolTools]

Guy, great points in the video. I agree 100% about the maintenance factor, that eats up a lot of time! Be safe.

[@JelenOutDoors]

Excellent video GP! I only have 1080 to watch videos but I do agree with you that making the 4k videos will benefit the viewers like me when I upgrade my system (need better internet service). I can't believe that you still haven't received your new Stihl 462, and I would also not be to impressed with paying the new rate when you ordered prior to the price increase. In my area there have been plenty of 500I's, 461's, 462's on the shelf over the past few months (note, it has been a couple of weeks since I was at the Stihl dealer here but they had some then and I did pick up a 461 about month and a half ago. Great advice on mowers and maintenance. I agree 100% on reducing it as much as you can because of the time and expense, plus storage for the equipment.

[@mikefromwv1010]

I would tell your dealer he can keep his saw.

[@GPOutdoors]

The thought crossed my mind for sure but I have heard Huskie is doing the same thing. Fingers crossed. Have a good one Mike!

[@richardmeyer7018]

Gord, I have the mmm for my lx3310 and the wife loves it. I had a GR2100 also but got rid of it due to the great job the lx does with the mmm. Nothing like mowing in the ac.

[@GPOutdoors]

Got to love the AC Richard! :))

[@paldeusjaco9657]

GP I liked your comment on "maintenance is a bigger consideration as you get older", it seems true, when I was a kid I didn't care about having to work extra to repair or maintain things...now..I don't want to waste my time just getting to the point where I can actually do work lol.

[@kevchard5214]

GP you make a good point I agree with your concept of maintenance as you get older. There is also the cost of maintaining multiple pieces of equipment on a retirement paycheck.

[@jamiemacleod6463]

Beauty of a Canada day here in southern NB. Looking forward to picking up a Woods 72.50 cutter next week. I’ll be mowing the top off the rocks soon enough. Have a good one.

[@michaelmactavish4445]

n.b im kinda looking for mower wich i checked on my buddys sites over in N.B at hall brothers enterprice wich russell,judy,shawn,rory are great sales guys

[@tractorman4461]

Very good thoughts about getting older and dealing with maintenance GP. 4k is probably inevitable. My daughters both tell me that I will like the difference it will bring to the videos. Kinda like comparing the picture quality of the new HD tv's to the old tube-tv. Keep on keepin' on my friend...always good thoughts and good video is guaranteed, even without a new saw in the picture. Have a great weekend and try to stay cool !!

[@daveknight1154]

Happy Canada Day GP.

[@GPOutdoors]

All the best to you and yours Dave!

[@gusswenson7811]

Good evening GP. I agree on the maintenance. I have two tractors JD and the Kubota a push mower a DR field brush mower two rototillers and a gas Weedwhacker .. Oh and 4 chainsaws.. hahaha It helps a lot I only use ethanol free gas on all my small engines.. so oil changes and greasing is the biggest maintenance I do.. I am starting to get a few battery powered tools.. so you are right on about your choices.. I hope you have a great weekend with the girls and Carol. Say hi for me and Sally. Hope you had a great Canada day.. Oh … cook something great on the grill.. Chef Gord 🥩🍔🌭🍤🍽😁 And enjoy the lake… As always stay safe and always be kind my friend.. Cheers

[@Andrew-fg7gw]

On the topic of maintenance, the FDR1660 is far lower maintenance than belly mowers. Need to change the blades or clean the deck? Just lift it up with straps and pallet forks and you can do it nearly sitting down or slightly crouching. No wrestling a >300lb deck off from under a tractor, no trying to get the mower up ramps to get 8" of clearance under the deck. Spindles are easy to replace as well with just four bolts once you undo the main drive belt.

[@brendank9011]

I walked into my local Stihl dearer in New Brunswick and bought a MS250 off the shelf and they had lots and plenty of other models too... Maybe its worth talking to other dealers they may have what you're looking for in stock and be willing to ship to you. Good Luck GP.

[@CapeAnnImages]

Glad you mentioned the 4k. I didn't know my computer went beyond 1080 and it does. One tool I bought and use at least once a week is also low maintenance. It's a cheap Sun Jo 3 in 1 pole saw with an 8" cutting bar, hedge trimmer and weed whacker attachment heads, battery powered. I had to modify the weed whacker to accept .065 cutting string. What it came with was something like .060 and I couldn't find replacement line that small. I have about 200' of hedges to trim and I get it done with about 50% charge life still in the 24v battery. Best Regards, Jay

[@GPOutdoors]

Morning Jay! Sounds like it is handy to have - the battery powered tools are getting better all the time. Cheers!

[@watershedoverlook]

All great points Gord. Hope you and your family enjoy a great Canada Day. We are doing the same this weekend at the Overlook celebrating Independence Day, or as they say in the Commonwealth..."Ungrateful Colonials" day! 😉🤣 Cheers!!! BTW...How much Propane (LP?) can you store there? It looks like huge tank capacity!

[@GPOutdoors]

Morning Chris and Happy Independence Day weekend! Great to hear you are enjoying it at the Watershed. I honestly can't remember as I type ( age ??!!) I think about 4,000 litres or so. Have a wonderful weekend

[@ernestkooistra1559]

Thank you, Mr. P. Happy Canada Day weekend! ✌ And, Cheers!

[@ducodefaria6355]

FYI Gord...I recently received my LX2610 and just want to let you know the engine whining noise does not exists on my model. There is a fix, and they might have made it in Japan. Love the tractor...Only annoying for me is the tilt steering pops out every once in awhile

[@GPOutdoors]

Good morning Duco! Congratulations and great to hear about the noise. That's good news. The tilt - it has happened a few times to me but I believe it was because I tried to apply it too fast. In other words, If i make a deliberate action of pushing the pedal and adjusting the wheel while my foot is still depressed and then lift my foot, and rock the wheel, i will feel and hear it lock into the position - then it does not move. If I do those steps too fast, I have found it has skipped up on me a couple of times. I assume I was possibly lifting my foot up too early. Hope that helps!

[@Malpeque_Bay_LX3310]

Happy Canada day to you and your family Gord!

[@jasonkosmal1125]

Happy Canada Day GP. 🇨🇦 I try to keep the hours down on my Mahindra. That is why I don't use it to cut grass. Here it is at least a bi-weekly thing. At two hours a clip with a 60 inch deck....hours can build up quickly. Cheers

[@GPOutdoors]

Great point for folks to consider Jason - thanks for sharing!

[@wlsteffen]

I can’t agree more with trying to get more maintenance. The older you get the less to like to do maintenance. You are doing a very good job on the videos.

[@GPOutdoors]

Thanks very much Wayne- enjoy your long weekend!

[@martyb3783]

I always enjoy watching your videos, even if its just you mowing your lawn. I completely agree with your stand on maintenance. I am getting older and don't look forward to maintaining the things I have, especially if it means rolling around on my back. Happy Canada Day/US Independence day. Enjoy your weekend.

[@GPOutdoors]

Hey thanks Marty! Have a great long weekend too!

[@ahmedmalik5478]

👍👍👉

[@woodbutcher40]

I bought my ms 500i for $1700.00 . A guy offered me $1900 because he was on a waiting list. MS500i gone. I bought a Holzfforma G660. Saw is a beast . I almost identical to Stihl MS660 even down to replaceable parts from Stihl fitting the G660 and only $460 on amazon. Halzfforma makes many different sizes. Something to consider at least.

[@GPOutdoors]

Thanks WR! Good deal for you. Cheers!

[@lonewolfFirearms]

About your comment on ordering something and then the price goes up before it comes in. I ordered a flail mower and it took almost a year to come in to my dealer, my dealer was telling me that the price had gone up $400.00 but since I paid in full when I ordered it, my dealer said he wasn't going to charge me more. He also told me he actually makes $200 on the sale so since the price went up he was going to have to work with the supplier to see if he could still just break even or it might cost him $200 in the long run if they wouldn't work with him. Crazy world we live in. He also said because of this he wouldn't be excepting full payments on ordered items anymore and would only require non refundable down payments and what ever the price is when it comes in the customer would have to pay or lose their deposit. That's just crazy to me.

[@GPOutdoors]

Indeed Bill. Thanks for the insights - Wish I had paid in full too. have a great day out there!

[@bobpurs]

Have a great weekend Gp. Enjoy the family 👍✊

[@GPOutdoors]

You too Bob!

[@mikeheilman2560]

Have a wonderful weekend with your family Gord, stay safe.

[@GPOutdoors]

You too Mike!

[@Snipick]

Hey uncle GP! Great to see you out and about again with the rear mower. Happy Canadia day to you and your kin! We just cracked 100 hrs on our Kioti CS2220 and we've been loving it. We got a belly mower for our unit, and have been really enjoying cutting our 4 acres of wild grass. The more I see your luxurious factory Kubota cab, the more I want to enclose our lil subcompact's open station. Them mosquitos here in Manitoba are out in full force! Keep your bug spray handy. Enjoy the rest of the long weekend and I look forward to the next video. Cheers!

[@GPOutdoors]

Happy Canada Day S7! Great to hear you are happy with the tractor and getting good use from it. Yup, lots of bug spray. LOL! Cheers!

[@abecombs4349]

Hey GP ! Happy Canada day ! You & family & friends !

[@jpjp3873]

Hi GP, I went the way of a separate garden tractor due to access limitations for the b2601 and to keep hours off of it. Thanks for all the great videos!

[@darcyscott2406]

Thanks for sharing GP. Have a great Canada Day and weekend! It’s nice to see you folks from Canada coming down to the U.S again, starting to feel more normal with the great people from Canada 🇨🇦 spending time at their camps and beautiful Lake Champlain! From Northwestern Vermont

[@GPOutdoors]

That's great to hear Darcy! Happy Independence Day!

[@emftestblock]

Love your insight. I bought a b2601 about a year ago to work on my 10 acres. Love it, You had something to do with my decision. Thank you

[@GPOutdoors]

Thanks kindly and all the best!

[@michaelmactavish4445]

@@GPOutdoors lucky kubotas has way alot more options wich deeres dont have many plus mowing lawns in ac cab makes it more comfortable

[@woodlyz]

My local Stihl dealer said that they did not expect the 500i available for at least a year because some of the electronics for it are manufactured in Ukraine.

[@miken8336]

As always great vid, don't care what the resolution is, they are great. I was able to buy a Stihl MS 500i and all I can say is that is a beast, 28" bar stock and it's gets the job done. Fortunately I had 2 big trees down and it got the job done quick. Happy Canada day.

[@michaelmactavish4445]

i all ways get a stihl flyer with sales on wich im getting a ms250 45.4cc saw

[@miken8336]

@@michaelmactavish4445 I walked into my local John Deere/ Stihl deerler and there is was. I asked is that for just display, or for sale. That is for sale they said, $1600 US dollars and it came home with me. DID I pay to much? Who cares? I have the saw I've been wanting and it will last along time on the farm.

[@GPOutdoors]

Thanks Mike! And congrats on the new saw. I am envious! LOL! Can't wait to get mine - have a wonderful long weekend!

[@michaelmactavish4445]

@@GPOutdoors yeah thanks gord and stihls makes the best quality and graig quigg hes a great president at stihl over in ontario

[@billbray8797]

Gord i agre When i built e with you about low mtce as you age. When i had my house built, I wanted it to be low mtce. It is brick with metal roof. Later on, i had a metal 24X30 metal shelter installed. You should look into these if they are available in your area. At the time they were cheaper than wood. Hoping you have great Holiday.

[@scubatraveler100]

Happy Canada Day my friend. Be safe have fun and enjoy your family and lake.

[@GPOutdoors]

And a Happy Independence Day to you and yours Rick! Cheers!

[@wtfbuddy1]

Happy Canada Day Eh, weather been up and down today but should be good for the fireworks later, hope you and the family have a great long weekend. Cheers and stay safe

[@GPOutdoors]

LOL! You too Buddy!

[@timwarren5021]

Bought 50 acres to retire on, now looking at the tractors thanks for all the great information and insight great job!

[@GPOutdoors]

Congratulations Tim - that is exciting for sure - good luck and all the best!

[@roberttailspin6330]

If all you have to do is yard maintenance, then something like what Gord has can be fabulous. If you need something to lift round bales, or do haying, or requires significant ground engagement, then it'll be nice to have something much bigger AND Gord's 2610. lol The neighbor who just passed away in the new year, had about a dozen tractors, some going back as far as old Averys and the newest being a Kubota. His strategy was to have a slew of differing tractor sizes to tackle various sized tasks. Getting a tractor stuck is a 'rite of passage'. Depending upon if conditions were dicey, he'd never send the largest one in first, as it's much easier to tow out a smaller tractor with a larger one, than vice versa.

[@garybrown3348]

Hi GP, Happy Canada Day. I went with the brush hog for my LX2610 but I have about 11 acres to cut when we have a dry year and don't cut and bale. I also have a John Deere 54" riding mower for the front lawn and entry (about 1.5 acre). Love the Kubota and the JD! I did switch over from gas weed eaters to the EGO 56 volt trimmer and love it. Have a great day!

[@PurpleCollarLife]

Good update, GP. I’ve been shooting, editing, and posting our videos in 4K for about a year now. I’ve always thought of it as future-proofing. Plus, my laptop has a 4K display,and the video quality is noticeably nicer.

[@GPOutdoors]

Thanks Chad! Happy Independence Day!

[@MannistoCay]

Happy Canada Day GP!🇨🇦🇨🇦 I did pick up a little Stihl that I will be previewing soon, but it was in stock. How wide is your mower? I've got an older push mower for the trimming, but would consider a flail. Great conversation. Cheers!🍻☕️☕️

[@GPOutdoors]

Morning Mark. Good stuff - he told me that the smaller saws are coming in so that is great for you. Mine is a 60". If you have trails or grounds that are brush or thickets etc along with lawn areas, then a flail might be the ticket for you. They work great! Cheers!

[@olddawgdreaming5715]

Hey Gord, you all have a great Canada Day and we will celebrate our Independence Day down here. You have everything looking good for everyone gathering this weekend. You're doing great with the equipment you have mowing the grass, but I remember some lady seemed to enjoy herself on the mower in the past. Might give her a choice ?? Just thinking out loud ;-) Stay safe and keep up the fun and the quality of the video and the sound was great. Fred.

[@killinskindlingfirewood1851]

Hey Gord, regarding your MS462 saw, the Dealer and STIHL should honour the original order price. I love my MS460 saw, it’s a power house with a 20” bar on it. Happy Canada Day! I hope you are enjoying it with your family and friends!

[@ASTANELAND]

Happy Canada Day GP. I totally agree with your logic on machines and maintenance. Too bad your saw is so slow to come in. Great video and I’m enjoying the 4K.

[@GPOutdoors]

Thanks Andrew. yup, a bit of a bummer for sure. Happy Canada Day to you too!

[@peacefieldfarm_mn]

Hi GP! Great topic today. I have been slowly moving to electric powered tools and vehicles over the last few years. #1 reason is maintenance. but now, a strong #2 is the price of fuel. I have electric (and gas) powered chain saws, electric trimmer, electric zero-turn mower, electric leaf blower, and electric weed whip. In addition I sold my ATV and bought an electric golf cart, and now own an electric car. I can power all that electric stuff from my solar array, so in effect, I am running all that (and power my home) from the power of the sun. I just love it!. It seems like the way of the future. Great video, Thanks for making it! Cheers!

[@GPOutdoors]

Morning Michael! That is awesome to hear - The future is here, so to speak. I think you made an excellent decision for the family long term, in building that solar system. I am sure in time , you will probably add another ground mount array as you continue to migrate to more electric powered assets. Have a great independence Day!

[@danielrapoza8468]

Hi GP. A Happy Canada day to you & your family. Great point on keeping your maintenance items controlled and to a minimum. Hopefully when your saw comes in your dealer will honor the price when you ordered it and not the current prices. Question on your finish mower. I noticed when you connected the lower 3 point arms that the two bolts attached to the mower arms moved around loose. Do they always float around like that ? If they do I would be worried that they would egg shape over time.

[@GPOutdoors]

Morning Dan. I hope they do too. But I guess we will see. The mower - Yes, they do - it is designed to float or articulate so the mower follows the undulations of the ground. I guess we will see in time whether they become mis-shapen over time. So far, so good. Happy Independence Day weekend!

[@GrampiesWorkshop]

How's she goin'? Happy Canada Day to you and your family GP!! Take care!!!

[@GPOutdoors]

To you and yours as well Grampie -Cheers!

[@eugenedennis2897]

I've noticed often in more recent videos that you are using a hearing protection headset instead of your iSO Tunes earbuds. Curious as to why. I've been doing the same for the reason that my fingers struggle with the controls when I want to listen to music while working.

[@GPOutdoors]

Good morning Raymond. Good catch. A couple of reasons - my daughter likes my ISOtunes and often forgets to put them back in my bag so I get north and find them missing - (honest - LOL!). The second reason is because I keep trying to use the different ones I have to help gain experience and inform the opinions that I share with you good folks. But hands down, love the ISOTunes - they are still my favorite overall. I think I need to buy her her own pair...:)) Cheers!

[@jh9855]

I forgot to ask. We have our Landpride FDR 1660 mounted on the quick hitch. Noticed your mower is not on a quick hitch. Any reason it is not on a quick hitch?

[@GPOutdoors]

Hi JH. I find it is so easy to connect without the QH, that I just always pin it direct. If I used the QH, I would need to extend it out on a shallow angle in order to allow the top Link articulating bracket to float properly over the ground. No other reason. Cheers

[@davemoore6107]

Hey GP anyone have any suggestions on what’s the best rotary cutter for the lx2610? How do you like the one you have? Do you wish you looked into another one or happy with this one

[@GPOutdoors]

Good morning Dave. I wish I could tell you which is best - I like this one alot - 3 blades etc. If I had areas that had brush etc as well as the front lawn i would have considered a flail mower but I really only have grass to mow. Good luck Dave!

[@chiefmik9108]

Hi GP, we have the 72" version of that mower and it does a great job on the open area's of the Homestead, but getting closer to house, where i have some slops, i have a used 22hp / 48" Craftsman I picked up used & it does the trick... that Ferris (which is built about an hour from my location) is sweet, but to me it's a one trick pony & is a bit of an overkill for me... God Bless & Stay Safe Buddy...Chief..{NYS/ADK}

[@GPOutdoors]

Great to hear from you Chief! Happy Independence Day weekend to you and yours!

[@chiefmik9108]

@@GPOutdoors Happy Canada GP & take a break this to cook some winnies...Lol

[@kendrury3713]

Hey Gord, why don't you use your ISO tunes anymore?

[@GPOutdoors]

LOL. I do - when my daughter remembers to put them back in my bag - she keeps stealing them. But also because I like to keep using different units to gain experience using them over time. Helps me to form better opinions on the pros and cons of each. Have a great long weekend!

[@SaturdayNiteSpecial]

Hey Gord, Happy Canada Day! Is that a stihl fs91r trimmer?

[@GPOutdoors]

Happy Canada day! It is an FS56 I believe - lots of power and works great for my needs here!

[@stannelson2582]

If you really want that saw there are many available in western New York maybe they will ship them too you!

[@thegreatnorthwoodswithbb2863]

GP I know what them finishing mowers cost LOL for what you paid for it you could have bought two riders😁

[@GPOutdoors]

LOL. Not here my friend. I sold the John Deere for more than I paid for the rear mount finish mower. All good. :)) Have a great long weekend!

[@bwillan]

If you're going to put steel siding and roof on your shed, does it really matter if you use pressure treated lumber for the frame?

[@GPOutdoors]

A good question B - I think it does - it will be an open shed - just a smaller version of the bigger one I park the tractor in. So it will still be exposed to the weather. The one I currently have still looks like the day we built it 6 years ago. Have a great long weekend!

[@98durangopack]

Hey GP, nice video. I had a few questions if you don't mind. Currently have a b2601 and love it. Wanting to upgrade to a cab as well. I manly do loader work, brush cutting with a 4 and 5 foot LP rotary cutter, and a 4 foor tiller. Very few times I felt like I needed more power and it was manly with a 5ft rotary cutter in tall wet grass. To my understanding both 26hp models have different engines. The LX2610 cab has a larger 3 banger. Have you felt with ac running that your down on power compared to the B2601 while under a load etc? Large price difference between LX26 and LX33 and emissions. As a Heavy Equipment Mechanic myself I'd prefer to stay away when planning on keeping the tractor for years. Thank you for your time. Just don't want to make a costly mistake. We rely on the smaller tractor to cut the edges of our fields and tight areas in WV. If you have any more pointers I much appreciate 🙏

[@GPOutdoors]

Good morning and thanks for the Q's. Honestly, I have not noticed at all. I almost always have either AC or heat running - The PTO HP is the same on both machines as you know so I imagine you would see similar performance - I have not felt any noticeable difference so far but i also don"t run anything like a bush hog. Wish I could help more but wish you all the best with the new tractor!

[@Rabuck4]

I have a mid mount RCK60-30BB for my LX2610 and my gauge wheel rubber came off the rim I cant find any tip or trick videos for installation could you help me?

[@68ray]

GP - do you have the larger tire option on your tractor?

[@GPOutdoors]

Good morning - no, just the regular R4 tires. Cheers!

[@garybenedict8513]

Geee Gord you are loaded with common sense. Never run for a political office you would do a very poor job !

[@GPOutdoors]

LOL! Happy Independence Day Gary!

[@oldmanbs1]

Cheers Gord, Happy Canada Day!!! Quick question, are you communicating with me on telegram today, or is someone trying to scam me? Brian.

[@GPOutdoors]

Another one trying to scam - I reported it again. KZbin issued out a Notice that they are working on technical solutions to minimize these scammers. Can't happen quick enough. Have a great long weekend!