580cc Seadoo JETSKI Engine 2 Stroke Drift TRIKE!! Part 1

In today's video I pick up a super sketchy rat rod trike. I shorten it and attempt to swap a Seadoo 2 stroke Jetski motor in with 60HP. Things didn't work out too great for the trike so I had to switch it things up later in the video..
🔴Thank you for watching!🔴
PARTS USED:
Tilitson 212cc electric start engine: www.gopowerspo...
Weld in Gussets:
www.gopowerspo...
Clutch/Torque converter for built engines: www.gopowerspo...
Live axle 1.25"
www.gopowerspo...
(supports up to 100hp)
Axle Bearings:
www.gopowerspo...
Gopowersports: www.gopowerspo...
Tell them Vasily sent you
Welders/plasma equipment:
5% off any HTP welding equipment and machines using code VASILY5%
usaweld.com/di...
Check out my welders here: 800usaweld.com...
SWAG offroad makes bending tube way easier:
www.swagoffroa...
🔥Follow on Instagram: / vasilybuilds
👕New merchandise: teespring.com/...
For all inquires email me vasily1fab[at]gmail.com
Want to contribute financially?
/ vasilycustombuilds
www.paypal.me/...
🎵 Music used from www.epidemicso...
3rd Track: benhurzz - a note to you.
Creative commons

[@VasilyBuilds]

Hope you enjoyed this longer video! Don't worry, 4x4 mower will resume as usual next vid

[@REAL_LIFE]

Nice how do you like the sun f tiresm

[@beardedbodger]

You need to do a video or two on the guy you bought it from dude!! He as some stories but I bet he has some skills too! He had a hell of a shop! Basically that’s you in 60 yrs!!!

[@StrykerGaming1224]

Dude that is crazy, I have passed that trike every single day on my way to school for the past 4 years. I can't believe you found it lol. I live in that town

[@arafatmotogarage]

That old man won't be happy to see this bro but yes he forgot that he gave it to a young guy who can handle more power and take it to another level...looking cool

[@redman715]

Good don't scare me like that

[@coloradodirtbike5930]

That old man, you could sit there and talk with for hours, bet he had some cool stories and really old parts/tools laying around his workshop that you never even seen before.

[@johnausilio9067]

544444

[@soibeem]

Yea I personally would have went back

[@not2fast4u2c]

You found a Gold Mine when you found that old man ..Stop just to visit with him once in awhile and you may get him to sell more stuff you like and he might help you make a part with that milling machine

[@bruhpopoppoop2759]

yes very true

[@Jack-bv7om]

That man might like Vasily until he figures out that he cut up the trike...

[@mbrrideitlikeyoustoleit8436]

@@Jack-bv7om agree he should not have cut it up

[@brandonl7396]

Stop and visit with the old timer, those guys are the last of a dying breed, good find buddy

[@not2fast4u2c]

@@brandonl7396 I am an Old Guy..It is a shame that I live in a small town and the younger generation has no interest in mechanical stuff any more or want to learn how to build their own go-kart or repair and customize bicycles and stuff ..I have the tools and knowledge to build some cool stuff

[@mykee426]

That old man is pure gold. Id sit there with a beer and listen to him all day and look around at all his collection. That trike gonna be sick when you done with it. Keep the vids coming bud

[@allensandven0]

My thoughts also, I was Moore interested in the ol man and his 102 year old mill and what ever else of old relics he had buried under all that stuff because you gotta know there’s a story behind each and every treasure! Lol 😂

[@mowmanjones3353]

I'll bet the people on your street love you, when you build something new, LOL

[@michaelblacktree]

If I was one of his neighbors, I'd be helping out.

[@mowmanjones3353]

@Tilc Rekcil cool

[@mowmanjones3353]

@John Stamper didn't see that video

[@codybuxton]

"Things escalated pretty quickly" 😄

[@larryalexander4833]

Remember those old guys have a lots of experience and most love to help give a hand on projects. Br respectful and you will be surprised at what you may learn.

[@smallgaragebigdreams6032]

So basically you bought this whole thing just for the bicycle front end 😂 love the builds though keep up the good work👍

[@cameron2187]

I would call it practice with the plasma cutter.

[@michaelblacktree]

In this video, Vasily buys a drift trike, and scraps most of it. LOL 😛

[@matthewanderson7766]

You shouldn't have bought it in the first place

[@hulenweston]

I love this flood of videos and builds 🥵🤤keep it going vasil and be safe

[@beardedbodger]

You need to do a video or two on the guy you bought it from dude!! E as some stories but I bet he has some skills too! He had a hell of a shop! Basically that’s you in 60 yrs!!!

[@fredericrike5974]

Vasily, just meeting that old machinist was probably worth the price; as you proceed into your fabrication skills, machine work will become more and more important. This man knows things that haven't been re imagined in our very IT world. He also knows a bunch about how to work around a problem to solve the bigger issues. You have made a friend, one you would do well to know for as long as he lives. IMHO; you have the future in your hands, but the future often needs the past to become successful. BTW, in it's passing, the trike you started with inspired you to do something better- you are already being inspired by the past, and doing better today!

[@benbaribault424]

Well said

[@fredericrike5974]

@@benbaribault424 Vasily makes it easy- he is one very talented nugget in a forest of them in Chattanooga- and many of them are first and second generation Ukrainians. I see nothing but good from this awesome pool of talented and hard working people.

[@richardaston6361]

Can't complain about your channel or fabrication (just a little jealous) just upset to see that trike cut apart for no reason.

[@Jack-bv7om]

Ikr! What was the point of even buying it if it’s just gonna get cut up into pieces and not used for anything?

[@tobiastarr3126]

For everything there is a reason!

[@Canadian_Craftsman]

"LET'S MAKE THIS TRIKE GREAT AGAIN"... RIP TRIKE!!(= LOLOL

[@Canadian_Craftsman]

@@johnfasanoii4382 glad I made you laugh brotha, this is a VERY important lesson learned ALWAYS START FRESH, NEVER buy someone else's project=aka headaches!! He did the right thing 😁✊🔥

[@VasilyBuilds]

😂 amen

[@Canadian_Craftsman]

@@VasilyBuilds i love your stuff dog keep grinding brotha!!(=

[@jjhack3r]

Trump 2020

[@justinhodgson8764]

Brooo.. I love the different engine types. Keep it up bro

[@dylanfowler3127]

I've passed by that guys shop a thousand times. Always seen that trike sitting on the side of the road in a metal pile. Never thought I'd watch a video of someone getting it and doing something with it haha

[@somenygaard]

I can’t believe your neighbors haven’t flipped out yet.

[@janeblogs324]

What and risk their grow house being raided?

[@Adub86]

If you wanna lower it, just push the fork tubes higher into the triple trees.

[@RAYRAY-om5dh]

Might sound like a good idea but your gonna have lots of tuning issues , Those mikuni sbn 38 carbs suck , if you don’t have experience tuning jetskis and understand how the carburetor rpms operates off pop off pressure. Better buy a pop off tester and a pack of jets and a set of t adjusting high and low screws ..I’d sell that junk seadoo engine and upgrade to a Yamaha 701 or a Kawasaki 750 jetski engine you can get them dirt cheap on eBay way more power and they weigh the same at the junk 587, how are you gonna make a closed loop water system that’s gonna keep it cool ?

[@hulenweston]

@vasilybuilds. I know you don't really do builds like this anymore but after you are done with all the current builds build a classic red go cart predator 212 like your old vids.❄️🎄

[@Zack-gk6gs]

Have you ever finished the go cart.trying to do something like this myself with a yerf dog spiderbox swaped with same engine

[@codyswartz997]

Couple of small points your better off leaving the carb and oil injection since the rotary valve has oil in it, You will need to maintain that Oil or you will kill the rotary valve and shaft. Second you need to inject water into the exhaust pipe to make it work, so unless your planning on changing the pipe or having water injected to the stinger you might have some issues melting the exhaust pipe

[@Mikefestiva]

I’m a little late to this video. Wow that thing is crazy 😂 I bet you made that old mans week! He looked really eager to talk. Take care Vasily 👍

[@resurrectionmotors2421]

R i p trike, excited to see what your imagination bills next God bless

[@BevrinWendraPurnama_bevbex]

why you buy the old chassis instead make a new one? why not just copy the design and put that engine

[@jackallred8228]

this kid is gonna make some big money one day. nice job on the videos as always my friend

[@bradleybates1624]

been thinking the same thing

[@joli2265]

Schaut noch jemand aus Deutschland zu? 🤔 Hello from Germany ✌️

[@matiod5772]

Logo, lustige Sachen was er da macht. Greetings from Munich🍻

[@RushFred]

ZUGRIFF !!!

[@typgamer]

Hoffe er startet noch richtig durch, er hat es verdient...

[@dragonmaster9316]

This is epic

[@melmrty]

Where is part 2

[@Chickendude1]

make sure you add oil to the large line in the bottom, feeds the rotary valve and the crank bearings

[@mercermechanics1788]

Dang

[@jamesthebond0072]

Why haven't you continued this build?

[@nathaniellangston5130]

When you showed the drift trike you bought from that guy I was kinda hoping you would build something a little better lol and you are!!

[@BuildsNotProjects]

We finally have some competition in the high horse power 2 stroke drift trike world! Looking forward to seeing this thing rip Vasily! We just finished building triple pipes for our 600cc Polaris XLT trike.

[@VasilyBuilds]

Thank you! I'm excited to see yours as well. Mine won't be as epic I think

[@LeObsidianCraft]

Vasily, I would find a dual carb setup from a 787 or 720 seadoo engine WITH the intake runner. These Rotax engines have rotary valves in the intake which act like a reed valve and require lubrication from the oil system, if you delete the oil injection you will have to mantain oil within the rotary valve cavity and if it runs dry you will blow the motor up. Dual carbs from another seadoo motor will really open up the 580 and you can maintain the stock oil system by just adding an auxiliary oil tank from a jetski, fairly available and cheap online. Also you will have to modify the exhaust pipe and water routing to run a closed loop cooling system on this motor since they utilize water injection into the exhaust to keep it cold and not melt rubber hoses. You will also need to source a water pump since these motors do not have an integrated water pump like snowmobile motors. They utilize the jet pump to pump water from the body of water into the motor. Lot of work to get this right and not blow the motor in the process. You will also have to source a seadoo ECM which can be pricey since you will also need a matched Dess key

[@jacobsomsky412]

SWEET!!!

[@matthewf1979]

Hey man, that 587cc engine was the hot shit in the 80’s! You gotta remember, the stand up actual “Jet Skis” are very small and weigh a couple hundred pounds. Everything is fast now, right off the showroom floor. There’s dudes with 1000hp skis now, which is fng ridiculous.

[@brad6779]

MATA. MAKE TRIKE GREAT AGAIN!!

[@ssoltys4128]

Too many builds not enough finished product

[@VasilyBuilds]

3 is not too many

[@liamwalberg1752]

Do it yourself then.

[@ssoltys4128]

@@liamwalberg1752 busy working 80 hours a week making money so I can pay welfare recipients like you

[@ssoltys4128]

@@VasilyBuilds busting balls youngster love what you do

[@bmxscape]

@@ssoltys4128 if you're working 12 hours a day 7 days a week why the fuck are you on youtube? likely because you are full of shit

[@tomfagan866]

If I remember the seadoo rotax motors have a rotary setup on the oil injection. You can’t just delete the oil pump like normal 2 strokes. They make a kit that can delete it and still keep the rotary valve lubricated. Otherwise the crank will lock up. Just my 2 cents. Great video.

[@Psyconinja1532]

I feel like one of the great treasures in life is finding people like that older gentleman. It's almost a guarantee that he has hours upon hours of stories and is a wealth of experience and knowledge. I'd say to stop by and talk with him every once in a while, he may be able to teach some things and above all, he might just appreciate it too at his age.

[@nickbaddorf2673]

Hey! Using a jet ski engine! I got a 1996 seadoo gti and I have been working on fixing it! I still haven't gotten the engine to work yet. This is super cool!

[@jeffpennington2043]

AWESOME.... That rotary valve gear you can fill it with 20 w50 syn.. an plug both holes leave a little room 4 exp.. That's how i DID MY ROTOX 712. 787. G L......

[@miguel360kmc]

Idk man that original style was crazy cool. Or it could have been.. just needed cleaned up some better parts but it was a baby V.W. trike/chopper trike- rat style... you should rebuild it, take the pics and rebuild but do it better..

[@driveitbreakitfixit7496]

Just a heads up dude those old ROTAX engine use a centre drive to spin the rotary valve!! You have to keep an oil tank just for the drive if you go to premix other wise you’ll have big issues my friend! Make sure that rotary valve has no scores or scuffs in it, if it does it would seal properly and you’ll find it lol be dogy

[@marcos.maitamcdonaghdaniel1874]

i have a mech-lanlord -goodfriend with 2 waverunners with motors and a bad ass golf=cart sitting outside ready for me to ???????? lol also lots of access to bike motor parts to addapt how long could i drop n drive and ill cut the other one in half put theseat in the middle and have a lil cart towing paddle boat rig to sell back to him lmfao ++++ i keep telling him ima snag it n make something cuz he dont deserve it ,,,,,,,,, becuse hell let it rot there and im the one who will take care of his bastard bikes n give them a good mad doc home and above n boyond ,,,,,,,,,,,,,,, its past the still sitting there after a lil bit more than year of neglect and more stuff pileing up ,on next to or even inside of it , dirt drawing on it lil by lil stuff missing or breaking off it for being a bad owner b4 i confiscate it n pimp it out law he knows i have I AM THE ONE THAT SCRAPS ALL HIS SCRAPS TO MAKE SCRAT BIKES LOL i WANT A GOLF-RUNNER LEME GET A LIST OF WHATI NEED TO GRAB PLEASE

[@jimciancio9005]

Very COOL to see not just a 2 stroke of course, but one of the most overlooked engines available for usually the cost of removing an old eyesore from a yard! Lol, Well around the coast and lakes area's anyways, for all the desert dweller's watching and thinking WTF is a jet ski? It's like a snowmobile in the south LMAO! A dime a dozen up north and way under utilized in the go kart builds! For the package size, weight to HP ratios, these 2 strokes weather liquid cooled or air are the best bang for the HP buck! Something to be said for a engine that's self contained, small, light weight, able to take a beating and produce dumb numbers of HP for usually under $200 weather its a sled or ski. Can't wait to see your creativity come to life with this unique project man! Good luck and be safe! 3 wheels and almost 60hp could end up with a trip to the ER lol!!!😉

[@TFD1982]

I’d keep that oil injection system get yourself a tank from a Seadoo 2stroke Connect that line that had the filter on it to the bottom of the tank . It will be much easier on filling up and it will take the guess work out of the equation

[@jamesetyrrell13]

Why??? Just Why?? Yeah it was heavy...heavy-duty..it looked like it would have been comfy and safe with that nice strong roll bar, and you destroyed it..I'd swear you done bumped your head the last time you wrecked...

[@DCDLaserCNC]

You must have some cool neighbors. Do any of them ever gripe at you rippin' your builds up and down the street?

[@JacobSherwood]

Causally holding 56 hp in your arms 🤣

[@thasilverado2290]

I need help, im trying to make my atv go faster by putting a big bore kit on my 2018 rhino tao tao 150cc atv but idk which one? Is hongyu 61mm Big Bore Cylinder Head Kit on amazon a good one?

[@davidmckinney6577]

That was wonderful job buddy 👍👌 and God bless you too buddy have a great blessed day 🙏

[@josephpettus3718]

Hey my friend great video and I am building a cooling system for a 750 c.c 2 stroke jet ski motor.. My question is why don't you see if that man you got the frame from would let you do a video on that 102 year old milling machine ?? Would he sale it is my next question?

[@makeitorleaveit1]

Where's your other builds, I miss the cr500 engine and mower build

[@keithparady2594]

Those rotax engines are strong living in Maine I’ve worked on a shit ton of sleds with rotax motors in them keep up the good work

[@timbyford21083]

I never see any engine on top. I see alot of fabrication involved but it enables you to shorten it up quite a bit. I like background builds!

[@BruceLyeg]

That montage was a thing of beauty, brought a tear to my eye

[@LokitheSiberian]

Don’t cool the pipe. Find a dry pipe or block the water off. It makes no sense to cool a pipe if it’s not in a watercraft.

[@stevenloomis8939]

What electronics does the rotax require ? I have a 587 I'm pulling out of ski and am building a mini side by side

[@pureprotein9597]

Those 587cc rotax’s can rip, as long as it’s in a smaller seadoo like the 365lb earlier XP’s they can hit 38-42mph

[@adamnahtankyoulol3499]

hey man what the hell !😡 . I built that freaking trike and i wasn’t done w it . my dad accidentally sold it out from under me when i was locked up for my dui. Right around 700 bux cheaper than what it was worth i think! An u cut it up just for fun and then made a mockery of me on youtube!? ima come at your blaster scooter w a metabo when ur out riding one day know dat

[@somenygaard]

Ok, enough already my jealousy is starting to bother me. Kidding, but not really. Lol Great job you are lucky in that it took me many years to get focused enough to know what I wanted to do with my life. You are going to do great things, keep it up the sky is the limit.

[@JetSkiBrothers]

I am super pumped about this build!

[@enjoythesho1992]

That diff came from a 70s/80s huffy riding mower

[@weaselsevenster3251]

Part 2?

[@t-dogracingandoffroad3198]

the thing was so great but then this man chopped it up like it was a piece of garbage or something, i liked the original better, should've kept it how it was but geared it to go like 80, at this point it isnt even the same trike

[@heathfiedler]

hopefully you have fun with it, though i think the drag trike look would of been awesome if you just swapped the old axel for the live one making it say a few inches wider to make it more stable.. shit youd been flying with that down a drag strip. But thats just me. lol

[@salvykc1379]

That engine won't work, needs to be constantly cooles or it will over heat real quick, and the water flows through the exhaust, so you will be constantly dumping coolant out the exhssut doesn't sound practical to me

[@Axon-bm2sx]

Could you help me out? I have a fuji 780 engine with cut up ignition wires and wanted to know what you did for ignition on this engine. I really want to build a go kart or something to take this engine but I cant start it without spark.

[@mixgashaulass2988]

Man I wish to someday be at your level, I have a 2 stroke swapped chinese buggy and some dirtbikes I work on and have some videos about

[@iancampbell6002]

Where did you get the sprocket that's on the crank? I have the same motor but the yellow version and am thinking about building something...either that or I'm gunna use the jet drive out of the jet ski and put it in a small boat

[@jonahruntz9818]

Definitely kinda sad watching you buy the trike basically for the forks but you definitely made good memories along the way and that’s what matters. Don’t loose contact w the old man, if you get close to him he will be a weapon for your channel lol

[@Motoman714.]

Geez you don’t have to talk about how shitty that trike build is. Im sure his son just randomly wanted to build that out of stuff he had laying around. And ik for damn well you’ve built shitty thing too in your past

[@robertstratford9598]

Vasily Vasily Vasily sitting their insulting the person and someone work by calling it he jankiest thing you ever seen what youtube has now made you a pro or something really like your videos but you really pissed me off wth that comment .

[@magee16749]

Idk about the jet ski motor but on the older bombardier snowmobiile engines you Can't just remove the oil injection pump because it has a hose pumping oil to carb or cylindef.like usual then I has another hose going to o rotary valve and mixed gas will not make it.to valves

[@wilson42cc]

You were lead to him for his wisdom ,,you already have some of him ,,don’t drink and drive,,, LOL,,

[@krudlumpstv7854]

Yooo what happened to this project I was looking to see a video where someone converts a marine engine to run on land and was bummed to not find a p2 to this. Do you still have plans for this motor in the future because that would be awesome to see!

[@simocreations]

Would it benefit to put 2 separate exhaust expansion chambers on it?

[@toddmccardle5125]

you could have saved the trike man you didn't have to cut it up if you was going to start from scratch you should have saved the original trike destroyed that old man's masterpiece lol

[@kalenbjerkeset1490]

I think the rear axel/differental is from a old 1970s alsport trisport it lookes exactly the same. I have a alsport with a predator on it.

[@TheCheezy303]

Man, you have too much time on your hands but nice video👍

[@channelofchannels7845]

How did you but the sprocket on the motor? I have a 657x I want to put on a gy6 side by side

[@davidowen888]

LOL The DUI Trike was definitely lacking in the common sense category 🤣

[@rwschaller1481]

Put some chains on those tires n hit a frozen lake.......or climb a bump (big bump!)

[@morganweast4228]

The trike did it's job, to inspire you to build it Better Faster Stronger. So it died doing a noble gesture. RIP Rat Trike.

[@MrLink12765]

Vastily be like: I got this new trike and it's not really what I want so I'm just going to plasma cut it and remake it completely.

[@Thanhinvent]

Chào anh trai

[@robertstratford9598]

You butchered that trike for what you hardly used any of it now you really got me pissed off not much for looking ahead and planning things out hu .

[@jackdevane2496]

Hey i hope you see this comment to save you the time im not trying to make you look dumb but i work on jetskis and know seadoos pretty well and you cant use that motor with a radiator as its made for a jet ski and why you ask because when the jetski sucks up water it goes into the head fills up the cylinder then into the exhaust then water box and out back into the water so the reason you cant use that motor is because the water exits through the exhaust and you cant make it where the water recirculates also it looks like your missing alot of parts unless he gave you a waterbox and ebox with all the internals so yeah before you put anymore time into it theres no way to make it work sadly unless you use a closed loop 4tec motor

[@mrgoldendeel]

How about doing a video on building yourself a fab table. This welding on your knees is for the birds man!

[@oofin2473]

I want to do a similar project. Can you help me with some questions?

[@27Zangle]

You can that Trike was build by backyard drunk shenanigans. I love it.

[@brbconan9807]

Good job .... I like your have engine 👍👍👍 bring to Indonesia 😀😀😀

[@nickygray4691]

If you don't want to use the cr500 bc of the kicker look at bvc trick bc the have a electric start for a CR500

[@budgetbuildz4191]

I've seen this done before with a 750cc triple jetski engine, it was pretty cool

[@VasilyBuilds]

Link it if you can find it

[@budgetbuildz4191]

@@VasilyBuilds kzbin.info/www/bejne/fGelZ3adjddol8k

[@budgetbuildz4191]

@@VasilyBuilds my bad I thought it was a triple, its actually a twin cylinder

[@willyhoogs]

@@budgetbuildz4191 still cool

[@snikwad003]

The exhaust uses water injection you will have to figure out how not to melt the coupler on the expansion chamber

[@chefboiard5468]

I wonder how you’re going to cool that motor when there’s no water pump the water gets pumped in by the jet pump on the ski and pushed out it doesn’t circulate thru out the motor

[@deweys]

You think we could get a couple episodes in old dude's shop if he's into the idea? You have a chance to preserve history here.