6-PACK OF TOYOTA TUNDRA LIFTS, WHEELS, BMC'S, & 35" TIRES

[@88ROTORS]

WHAT TRUCKS DO YOU WANT TO SEE IN OUR VIDEOS?

[@RM.....]

Tundras,4 Runners ,Tacomas ,Wranglers,FJ"S too

[@YouTubeuser-yp8qk]

Do you guys work on Silverado and Sierras?

[@paulkeitz7215]

Gen 5 4runners. Love the upgrades you do to them!

[@dodocolcol]

Toyota Tundra...hahaha

[@akololomo4021]

Fj60

[@sergioayon46]

Damn, this Tundras are freaken beautiful!!!. I was going to exchange my 2018 Toyota Tacoma XSE fully equipped for a Tundra, but I had 10k negative and the payment was too high. So I ended up trading it for a 2019 Toyota Tacoma TRD off Road 4x4 fully equipped, but I really want a Tundra. Hopefully I can buy one next year, cause right things are really bad, I was furlough from my job and I've been like this for 3 months already and they haven't even called me back or had said anything about opening back the casino where I work at. I'm getting really worried now, hope everyone else is safe and healthy, hope all of this coronavirus stops and somewhat goes to normal, can't believe people still have jobs and money to spend. Good for them, wish you all the best to you and your families!!!.

[@wm5848]

I wish I lived closer to your shop. I would be doing this to my tundra.

[@TRDdude-pn6oi]

have never got a straight answer but the tundra comes with a 4:30 gear, aren't you supposed to re-gear to 4:88 for 35s or does it really matter? is it noticeable power wise between 35s and 33s?

[@razmataz275]

Love Bronze wheels ❤

[@SongHawj53]

Just subscribed! Liked your tundras…what’s the turn around for 2014 tundra double cab? Would like 6” lift

[@neverend777]

Was the first white Tundra 0 offset for certain? I noticed it had more poke than the last Tundra with +18 and Tundras are -60 stock wheels.

[@chuckasarus]

I noticed that the rear leaf spring is so close to touching the exhaust. Why don't you use a lift block instead of the shakel?

[@dodocolcol]

What happened to the calvalry blue one???

[@franciscodallos1049]

The white tundra is 6 inch lifted?

[@chrise8963]

Any thoughts on the new Falcon kit for tundra? Love the videos!

[@고찰리-e9n]

내차도 툰드라1794인데 인치업은 뽀대나네요 참 이쁘게 튜닝하네요

[@green76vett]

Just subscribed. Yall got the best tundras on 35s on youtube! I need info on putting a 3-4” and 35s on my truck but im in Va. i loved the gray tundra yall did on 17s black wheels but i cant figure out what wheels it had. Badass keep it up!

[@robertkenttompkins9414]

On you lifts with the 35”tires, how did you remove the tire rub from the front inner fender? Additionally, what are you actually cutting away on the rear inner fender as your video doesn’t discuss it, just shows them cutting away the plastic? Thank you

[@cris4u0426]

How much will the with tundra set up will run for? Got a 2017 tundra and will like to get the same set up.

[@majerrahim]

how long it takes you to do the bmc? or can you do a whole set up same day? (bmc coil overs leaf pack and ucas) and front diff drop

[@88ROTORS]

About 2 hours for the BMC alone the Tundra. 4-5 hours roughly for the whole job.

[@albertlibricz1819]

Do you guys ever notice on the 3rd gen. Tacoma's that the passenger side rear tire sticks out further then the driver side?

[@christianandrade7631]

What would these type of packages cost? Looking to get some work done on my 2015 tundra

[@hottmancanelas1797]

What would it cost for a Kings Shock kit , 35-12.50 BF Good ridge tires with some method rims for a 2017 Tundra TRD-PRO🧐

[@pedroortega2891]

Hi, 88 rotors, what is the size for the rhims on the white tundra? Is 17x9.5?

[@henryh9142]

Can you do full u turn on 35s?

[@romeogonzales4272]

How long would it take to get those rims and tires on my 09 tundra ? With maybe a 3” or a 4.5” bds lift work ?

[@jessesuarez1719]

Do you guys calibrate the speedometer after installing the 35's ?

[@dustyhiebert5748]

Hey Tundra Fam!! So I bought a 2019 Tundra that appears to already have a leveling kit as well as air bag suspension in the rear. The tires that came on the truck from dealership are 35x12.5R18 Cooper Discoverer STT Maxx. There has not been a body mount chop and the front plastic inner wheel well panels protecting fog light etc. do not appear to have been modified at all. I haven’t heard any rubbing since I’ve owned the truck (5 months). Can anyone tell me why I’m able to run 35’s on my truck as it sits currently? Any advice is appreciated as I just bought a set of 35x12.5 Ridge Grapplers I’m hoping to swap out the Coopers with before winter and just want to make sure I’m not setting myself up for a more expensive project. Thanks again!! Oh and I’m still running stock wheels if that helps.

[@user-wc4zy5lb1m]

Do u ever do A tundra 3 inch level with 33 or 34's without bmc?

[@88ROTORS]

Once in a blue moon someone prefers that with no BMC. But majority of Tundra guys common goal is to fit 35's due to the large size of the truck, IMO.

[@thatguygk1980]

Have you ever encounter a Tundra where the right rear wheel stick out about 1/2 - 3/4 in more than the left? I have a 2021 TRD PRO Tundra and was at the local dealer yesterday and all of the tundra’s on the lot were like this and no one had heard or or noticed this before. I was going to do rims and tires, but now it’s driving me nuts. Do you know if there is a remedy for this?

[@J.NOBODY.1]

It’s common on the tundras. Mine is the same way.

[@fjb5087]

What’s the cost on something like this?

[@88ROTORS]

All 6 trucks have different parts with different pricing. Give us a call and we can go over the details of what you’re interested in an quote you accordingly. Thanks!

[@jaimerivas9189]

I recently installed a 3 inch front level on my 2014 tundra but now the front is a bit higher than the back, what can I do?

[@88ROTORS]

3” in front isn’t a level. You need to lift the rear to level now. Level describes the stance of the front being the same with the rear. Sounds like you just lifted the front 3”

[@raysh3845]

I really enjoy watching your videos. You guys do nice work on those Tundras. Do you know anyone that does the same type of work in areas like Discovery Bay or Brentwood ca? I would appreciate it. Keep up the great jobs you guys do 👍🍺

[@sharingan6481]

Noble Motorsport in Modesto or Merced, ca. They just did my with the same set up as this one