$600 EBAY TURBO INTEGRA (Dyno Day)

After the long turbo install headaches we finally get to see MORE POWA BABY!
FOLLOW ME HERE⬇️
•Instagram - / itsa_project

[@luinquarantine1767]

I respect the grind bro, keep making these Integra videos🔥. One of these days one of your videos gonna blow up watch.

[@Itsa_project]

I really appreciate you guy man 🙌🏽 that’s the goal but I’m not only going be making Honda content I have a couple cars in mind I wanna buy. Still JDM though!

[@teknique8292]

After all the hard work and hours you put in it’s dope to see you get your car working the way you wanted it. Congrats and thanks for the videos!

[@Itsa_project]

thanks man and just wait till the next video lol something happens...

[@teknique8292]

Michael Ortiz well I hope it’s nothin bad. My only advice to you would be to keep it under 10psi unless your engine is built. Either way can’t wait to see the next video.

[@o3men220]

Teknique 82 I thought I was going to be around 10 psi but the car kept going lol he gave me the moon tune 😂 and well you’ll see what happens when I post the next video on the turbo series.. Instagram sees it all first so follow me on there.

[@timwolf6470]

Holly motor mounts ....bro you need some that engine rockin

[@Itsa_project]

Lmaoo yeah I already bought some lol

[@jacobflores6479]

Been a Z chassis guy the last 3 years, got a Honda prelude and kinda starting to enjoy the simplicity and fun you can have with a Honda motor especially modding it is so much cheaper than a 300zx 😅. Ur videos make me wanna get another prelude and turbo it

[@Itsa_project]

Do it man it’s 100% worth it 😂 I have a lot of headaches because I went the cheap route and my car is super high mileage 😅 but it still brings a smile to my face 100% of the time

[@smokeysazon]

Man glad you made this KZbin. I been working on my 96 ac. I’ve literally had to almost replace everything, but the outcome is the best part.

[@4g6_miragecolorado00]

Nice!!! Congrats man! I'll have to watch your other vids

[@Nick-if4zo]

CLM does good work.. gotta get some stiffer engine/trans mounts on there to withstand that added power

[@Itsa_project]

Yeah I’m definitely upgrading Mounts lol

[@1flynlow]

THE DAY IS TODAY

[@eggbeaters]

I’m behind you all the way bro . I started with my 93 da tea and still have it. Almost fully built b17 I’m making amazing power . Keep it yup bro but that engine is moving ALOT . Or maybe it’s just my eyes

[@Itsa_project]

Nah the motor is have a rave lol it’s moving like crazy but I bought something for that, that I haven’t reviled yet 😊

[@ProdZensei]

Can’t wait for the next update on the Integra!

[@Itsa_project]

Working on those videos this week so should be up soon! 🤗

[@s6ld353]

keep up the grind

[@Itsa_project]

Never going stop 🙌🏼

[@skybeats8791]

How do you not have 400 subs yet? You're grinding dude! :o

[@Itsa_project]

Thank you lol but I’m not grinding nearly as hard enough as I want too got some life stuff in the way right now causing me not to post as much as I want 😣

[@gelopez100]

Nice video man appreciate the content! Makes me wanna get an eBay turbo kit and build my b16 in my teg. Your teg is hella sick keep it up G🔥👌🏻

[@Itsa_project]

Thanks man! Appreciate the kind words! Stay tuned to see the crazy transformation that’s about to go down.

[@gelopez100]

Michael Ortiz Will do captain👍🏻

[@godspeedcustoms1]

Then engine wobble is horrible! Get some solid mounts and the power transfer will be so much better. Looking to do an eBay kit and see how my B20V GSR does on the dyno. Crazy power you have for what’s done!

[@Itsa_project]

Yeah I got new mounts and if you go eBay dont be like me replace the wastegate thats what blew mine up 3x lol

[@illstartAfire]

Hey yo making some jam bro, car is moving right along , Now you got me pumped to get on my car this weekend since I only get one day a week to work on it , I’m waiting on my t3 spacer to come in still

[@Itsa_project]

Yeah man when it’s boosted it’s a whole different level of fun!

[@mexicorolls]

Nice man good shit from the eBay setup makes me wanna buy one for my channel next

[@Itsa_project]

Yeah their super fun cars!

[@repnatl]

I was about to say damn did he forget to use motor mounts till you said it lol. 300whp is nice on a teggy.

[@westcoastmotorsports5506]

Yo I’m about to buy this same Kit I’m excited as fuck to get it going now thanks for posting bro 💯🤟🏾

[@mexicorolls]

Eclipse vs Integra collab video?

[@mexicorolls]

If it’s not blown up haha just saw ending with oil pressure

[@Itsa_project]

Lol yeahhhh something happened 😂 what I have planned now it would have to be your mustang vs the integra 👀 more power coming. But I’m planning on doing the same set up on another integra soon so we can definitely collab on something!

[@mexicorolls]

Michael Ortiz I’m down for mustang too the mustang moves out well 😈

[@john90304]

New sub I own a 95 GSR and planning on going turbo. Any advice

[@Itsa_project]

Welcome and thank you! I would definitely get some arp head studs for your head doesn’t lift and try to stay away from 340hp lol you’re car could run fine but I wouldn’t do it again unless you don’t mind blowing up. When I go in for a retune I’m going to drop it to around 320 or less just for it can hopefully last longer

[@john90304]

Great videos & advice 340HP 👍🏼👏🏼 I’ll be happy with even 250hp

[@Itsa_project]

Anytime brother 🤘🏽 you should be able to hit 300 no problem just depends on your fuel. I ran 1000cc injectors and 450 fuel pump but you don’t need that much for 300. 700cc and 255 pump should get you there.

[@john90304]

Good to know thanks. Ever since I could remember I always like the sound of Turbo 💨 I will buy couple of items at a time

[@andrewleach1996]

You need to do engine moter mounts badddddddddddd engine shouldn’t be moving that much

[@Itsa_project]

I got some don’t worry 😂 it was bad

[@codyblackdc4]

Tooo dope

[@Itsa_project]

Thanks man! 🤘🏽

[@GennoVidz]

o.O those motor/tranny mounts concern me in this video, hope that car survived after all the pulls if you never replaced or repaired them

[@Itsa_project]

Yeah I got new mounts lol I know they were bad

[@GennoVidz]

@@Itsa_project glad you did, good work with the bud though

[@jjbarrosjr]

Dude, did you have an oil catch can with lines going to the valve cover to release pressure in the head?

[@alexisrios9127]

Stock sleeves and head? Or you changed the cams and cam gear

[@Itsa_project]

Stock sleeves and completely stock head

[@dc2kai]

Stock gsr?

[@Itsa_project]

Yes sir just arp head studs

[@dc2kai]

Michael Ortiz 🔥🔥🔥

[@jerrysgsr7898]

How many pounds of boost are you running bro I’m about to get my car in the dyno in 2 weeks along with my brother in laws

[@Itsa_project]

I got the moon tune and went too 17psi lol dont do that if you want it to last. Unless if it’s built. Stock I’d stay around 300-320hp but have fun man hop everything goes well!

[@jerrysgsr7898]

Michael Ortiz I’m on a street tune rn at 7.5 pounds I’m thinking of doing 10 pounds for the dyno

[@HungryGamin]

What turbo kit is this from eBay? Got a link?

[@Itsa_project]

I have a link to one in my first install video one the comments that is similar since the exact kit I used is sold out.

[@HungryGamin]

@@Itsa_project bet, thanks

[@Itsa_project]

No problem

[@jango9534]

Yo, New sub. I got a 97 GSR, looking at getting coils and new sway bars. In your opinion tho, turbo or J series swap?

[@Itsa_project]

Welcome and thank you! I personally would go turbo even though J swaps are cool you need money and probably a lot of custom fabrications so I rather not go through the headache but it’s up to you if you have the time and money go for man 🤘🏽

[@nicolasgarcia408]

How much did you pay for the tune?

[@Itsa_project]

It depends on tuner but $600 was that actual tune.

[@jdportwerks6795]

Not enough power for those slicks buddy😂

[@Itsa_project]

Not yet 😂

[@jdportwerks6795]

@@Itsa_project I love this video!!! Man! Just port that head and add cams and you will get 100hp off that alone. I just finish building my civic with gsr but now have to plumb it with intercooler pipes etc etc

[@pyropureTTV]

I wonder what ill get with that turbo. Im at 200 already the nuild i got

[@Itsa_project]

Oooph it should boogie lol just depends on if your build supports it

[@crxrovski8250]

Who did the Dino

[@Itsa_project]

CLM Motorsport I’ll be going there again

[@brando_shoots8286]

If you don’t mind answering, is it a stock block with just a turbo kit?

[@Itsa_project]

Yup completely stock with arp head studs

[@brando_shoots8286]

@@Itsa_project is that all I would need for a turbo kit to get to my goal of 400whp?

[@Blaze22F]

Are you GSeven???

[@Itsa_project]

Nope sorry

[@510kali]

Pump gas?

[@Itsa_project]

Yupp pump 93

[@510kali]

@@Itsa_project 17 on pump ? Ouch haha ..hope u go e85 on your next build

[@Itsa_project]

Lol yeah it a bit much but I have boost by gear so it’s not all the time at 17psi but e85 is 100% coming

[@Geo-Media]

Im going turbo on my car as well Which kit did you get if u don't mind me asking

[@Itsa_project]

I just bought a complete kit from eBay with ac/ power steering capability’s for around $600 I linked one of my first install video that’s similar in the comments. But there isn’t like one that everybody buys you just gotta looks round and see what they come with.

[@EMPIREKING3Clashroyale]

What motor do u have?

[@Itsa_project]

B18c1 ( comes in the gsr )

[@EMPIREKING3Clashroyale]

@@Itsa_project ok, cause I have a gs b18b1 but it’s an automatic so I’m gonna swap it to Manual so I can put a turbo in it