7.3 idi race truck gets a rollbar using cheap hzxvogen welder racetruck ep.12

Hit like and subscribe for more idi videos. Until next week, check out these other #idi #6.9 #7.3 #diesel #bricknose #bullnose videos!
What to look out for when buying a used 6.9 or 7.3 idi diesel part 2
• Buying a 6.9 or 7.3 id...
What to look out for when buying a used 6.9 or 7.3 idi diesel part 1 • BUYING a Ford 6.9 or 7...
3g alternator upgrade in 6.9 or 7.3 idi diesel ford
• 3g alternator conversi...
7.3 idi engine wiring harness color codes and sensor locations
• 7.3 idi diesel wiring ...
The truth about idi injector return line kits
• The truth about inject...
Wiring you high idle to a manual switch.
• IDI diesel manual high...
Old timers trick injection pump repair in a bottle
• 6.9 7.3 idi diesel inj...
How to bleed air and prime a 6.9 or 7.3 idi diesel fuel system
• Bleeding air out of th...
Replacing power steering lines in my 6.9 idi
• 6.9 idi ford truck pow...
Idi coolant flush and refill
• 6.9 or 7.3 IDI diesel ...
Ford shower head fuel pick up to fuel sump
• Fuel sump install bull...
Ford fuel selector valve replaced with brass 3 way valves
• ford fuel tank selecto...
3g alternator swap to upgrade your old externally regulated alternator • Ford 7.3 idi diesel 1g...
Facet electronic lift pump installation
• 7.3 idi facet Duralift...
Where to plumb in and hook up aftermarket gauges to an idi engine (oil pressure, water temperature sender locations) • 7.3 idi diesel gauges ...
How to change 7.3 idi glow plugs • 7.3 idi diesel Ford e3...
7.3 idi race truck build part 1 tearing down the crash test dummy
• 7.3 idi diesel race tr...
7.3 idi manual glow plug button how to • 7.3 idi diesel glow pl...
7.3 idi fuel heater delete mod • 7.3 idi diesel ford fu...
High torque starter in a 6.9 or 7.3 idi diesel • Ford 6.9 idi diesel du...
Reviving a 6.9 idi diesel by hotwiring the fuel shut off solenoid and doing a manual glow plug button • 6.9 idi diesel crank n...
Basic wiring to hotwire and start a 6.9 idi from under the hood
• NO KEYS NO PROBLEM! Ho...
Basic wiring to hotwire and start a 7.3 idi from under the hood
• Start a 7.3 idi diesel...
Diagnose and test a heater defrost system that is not coming on
• Troubleshooting and re...
Heat only blows on high DO THIS!
• Heat only blows on hig...
Check out these videos for more information on my #wmo #blackdiesel centrifuge set up.
5 ways to save $ setting up a waste oil centrifuge
• Waste oil to black die...
5 hidden costs to setting up a centrifuge
• Waste oil to black die...
First batch of black diesel ran through my wvodesigns centrifuge
• waste oil to black die...

[@user-lz2cj9en8e]

I look forward to seeing you in the truck race this year. Good luck

[@worthshop]

Thanks for watching, looking forward to putting on a show for everyone. God bless.

[@mordicialuminous6792]

The rear, of roll bar I wouldve put pins, because I need that space for lumber it such. Thank you, I did get some ideas for my install.😎

[@worthshop]

Thanks for watching! Glad you got some ideas. Good luck with your project, and God bless.

[@Njw033]

Can’t wait till it’s all finished!

[@worthshop]

I only have until beginning of June to get it finished up! Time is ticking away and I keep having other stuff come up. But I will get it. Thanks for watching.

[@LarryReynolds591]

Epic! Love watching this build come together.

[@worthshop]

Thanks for following along! I need to get a move on, races are beginning of june.

[@DirectCurrent4u]

Nice work on the Rollbar! Race Truck commin along real nice! Keep up the good Job my friend! 🙏🏻👍

[@worthshop]

Thanks! Feeling like I am a bit behind for getting it ready before the June races. But things came up this weekend and I had to prioritize getting my son moved up here rather than working on it.

[@DirectCurrent4u]

@@worthshop Family always comes first! 👍

[@jackdaicole7595]

Fixed my broken injector line. Put a whole new set on runs 100% better. Just notice it takes a few to about five revolution to get it to start but once it runs it will crank right back up. Concerned it has a leak some where checked pump lines return lines and injectors fuel filter housing any ideas where else to look. Before warm glow plugs fire up first turn every time this is the first!

[@worthshop]

Tank switch valve is a common cause of fuel drain back and slow starts.

[@simpleman4224]

Coming together! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

[@worthshop]

Thanks for watching!