80HP Go Kart Twists Chassis | Burnout Gone WRONG

Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
To make our 900cc Ducati powered racing go kart safer and easier to drive, we made adjustments to the foot clutch to make engagement smoother. We also decided to mount racing go kart wheels with turf tires on the rear of the go kart to try to do burnouts. The tires gripped way better than we thought, and the raw torque of the 900cc engine bent the go kart’s chassis.
----USE CODE "CC10" FOR 10% OFF AT GOPOWERSPORTS.COM----
(Discount applies to mini bike, street kart, and off road kart parts only)
Go Power Sports: bit.ly/3QKyODE
Call Go Power Sports for full availability of racing wheels & tires.
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

[@colinfurze]

I remember bending a moped/scooter frame and the force it took to bend it back made you think it was witchcraft that must have bent it in the first place.

[@mflbikes1870]

Make a mini drag rail with a two stroke engine

[@caydengordon3146]

Didn’t expect to see you here!

[@caydengordon3146]

You should try and make a lawnmower or something else other than an automobile have a v8 enging

[@anythingthatmoves9609]

My god it’s all interlinked

[@acnc840]

You know your making cool stuff when @colinfurze is commenting on your videos

[@KrustyKlown]

A few safety tips for high power - put locking collars behind your wheel hubs to help prevent those hubs from sliding inward (bad stuff happens then). Also considering drill/tapping hubs and wheels for 5/16" fasteners to replace the typical 1/4" standard stuff. This is what we do when racing vintage twin engine karts (40-90hp). I've seen many accidents caused by hub sliding, and broken 1/4" bolts.

[@juggalotuz04]

"They're wide, they're sticky, but we like to party!" Haha.

[@alex_rodriguez777]

Favorite part haha

[@MulletMTB69]

Love the profile pic.

[@brianlopez8196]

Yea party let’s get drunk lol

[@boosted_3478]

8:03 lmaoooo he sounded like hank hill

[@tvsnake7841]

Or mr. Anderson from beavis and butthead

[@JohnWilliams-nx2no]

bwahahaha

[@zaneclark5226]

TvSnake 😂😂😂😂

[@democratsaretheDEVIL]

Dangit Bobby.

[@jakedehoyos28]

SO WHAT YOUR SAYING IS THE FRAME IS BAD ON THE DUCATI CART AND THE DRAG RAIL NEEDS A MOTOR

[@THR33SIXX3MPYR]

CAPS LOCK

[@robmanueb.]

The drag rail is weak as fuck and already heavy, if they add the Ducati motor to it, it will go slower than the cart it is in and they will have to add more steel to make it safe.

[@mikeisaac3826]

Jake DeArmond The drag rail needs way beefier axles and brakes too. The axle wobbles a lot with the 670 on it.

[@nate0765]

@@robmanueb. the Ducati has a lot more power than the old predator plus it has a 2 speed transmission. They can re gear it and go way faster than the rail has ever gone.

[@icebox1145]

@@robmanueb. they put a 50 horse engine on a lawnmower and an 80 horse engine on a decades old gocart chaisis. do you really think the rail will be more dangerous then the ducarty already is?

[@michaelknowsall1410]

Time for a complete drag racing frame build for the deathcarti

[@floppycopy1284]

Already have one

[@michaelknowsall1410]

@@floppycopy1284 something able to withstand the power my dear sir

[@moosemechanic4591]

@@michaelknowsall1410 they already have one XD its called the rail

[@michaelknowsall1410]

i say a sandrail fully independent 900cc single seat busco killer

[@deagano6058]

At 7:04 John says “don’t die it’s not worth it.” That should be a new sticker

[@handyhippie6548]

when the engine is bigger than the vehicle it's in, you know it's gonna be a wild ride. you boys are insane!

[@DashnCars]

Oh man, when Ike see's the bent frame.... that sound you make when you get surprised by a snake. @8:02

[@lukebrown2183]

Went back to it, your right

[@DashnCars]

@@lukebrown2183 OHHHH

[@nightmareinaction629]

Dash-n-Cars lol

[@slowazzes1972]

Dash-n-Cars it sounded like hank hill

[@cbinc24]

Put that engine in the drag rail!!!🙏🏽🙏🏽

[@tvsnake7841]

Yea

[@kamplayz3784]

Ed H you’re comments is kinda cringy

[@RUNDNB85]

gotta say you two together are the dream team, love your attitude to each other. keep up the good work.

[@neilserum6954]

Every one I talk to about the rail that have seen it all say the same thing, It's by far the coolest thing you have built so far.tead your comments and you will see the support for sticking the Ducati in the rail and let Ike drive the snot out of it...!! Again ,thanks Neil

[@driveitbreakitfixit7496]

I think it's about time you guys do something with a snowmobile engine or something 2 stroke

[@Daydreaminginmono]

100%, will be very noisy though

[@moosemechanic4591]

nah man different strokes for different folks

[@user-neo71665]

I'm 39 and have never seen a snowmobile engine in the south. They are slightly rare to find down here and shipping one I can tell you is something else. I been looking into it for myself. Much better/easier finding a racing 4 wheeler down here. People keep suggesting them but we just don't have them laying around down here for cheap like ya'll up there have.

[@nighttracker1472]

Yes twice the power they already have I like this

[@moosemechanic4591]

Don’t 4 strokes make more torque therefore are better for drag racing? 😂

[@mrbriancnc]

The best part was when you got the monster truck to tow it in

[@rangerst_870]

100% agreed!! That was awesome!!

[@thatguybigbanks3068]

I was thinking I was fina see a big ass truck and this popped up 😂 love it

[@vulcanpilot-go7dj]

Hank Hill "dammit Bobby you bent the frame!

[@El_Chompo]

LOL pulling it with the monster 'service' truck. I love it.

[@landtowater_2747]

99.999% of comments are telling you to put it on the drag rail so... PUT IT ON THE DRAG RAIL!!!

[@Deepanimosity]

8:16 It's been a long time since I've laughed so hard. Mini truck towing mini race car HAHAHAHA

[@ccgarage5869]

Awesome guys I’m ready to see the videos of the model a and the c10 .... im building a c10 step side my self right now

[@BIllMcCambridge]

Dude!! Dude !!! Dude!!! Duuude!!! It'll be fine strikes again. Busted it and fixed. Great vid guy appreciate the time lapse. Add in some slow motion grinding it'll be great. Have fun!!!

[@motorcyclemechanic.]

Never too much power

[@MrTheHillfolk]

Truth. Just brace er up a little

[@VasilyBuilds]

vincent padula cr500

[@ronanrogers4127]

too

[@gsxrgeorge00]

Exactly. That's why they have a pedal to control it.

[@psygn0sis]

Skinny tires way out on the axles with a 200lbs guy bouncing up and down. Yeah, you bent the frame.

[@davidmoon2877]

Kids will be kids...

[@rangerst_870]

your logic would imply the bending of the AXLE, not the frame. Which they did not do...

[@jlspldart]

I just have to say that you rolling up in the monster truck kart to give a tow was the most hilarious/kewl thing I've seen in quite a while!

[@justinbrangwyn3730]

Man I remember watching you guys when I was 12! glad to see you still doing it!

[@Ka_Gg]

Those 89 5.0s may have been the most powerful engines ever made! lol

[@skasev]

By far the best build!!

[@rowan2128]

That was pretty cool how you straightened the frame that’s a great idea!!! The ducarty is freaking awesome!! Great vid guys!!

[@scottbradford4130]

That thing is sick!! Great job boys

[@Bertoslav]

6:03 looks like your driving w/ a dog sitting next to you. Lol

[@corypatterson3072]

Looks like 2 little ears

[@dajiban9325]

Do a model A video please! Love you guys you rock and roll hard!

[@R.N.GPerformance]

you guys do some cool builds. great ideas always!

[@Vinlaell]

When he saw the bent frame I loved the OAH! Sound

[@andrewhh898]

So since it's bending the frame on that kart, let's put the motor on the drag rail

[@GearHeadWW23]

ha! ike has a "foot" pedal, been looking for one of those

[@rolandocrisostomo2003]

Lmao, how come some guys have all the fun, im not sure what was more fun, the burn out, of the towing of the droken down kart.

[@lars_xdd7819]

I had never to mutch POWER!

[@adamamador3541]

At 8:04 he sounded just like hank hill 😂😂😂

[@LuxxyHD]

That’s some power

[@megashooter]

The second the monster truck came in I died! Great videos too. I saw the build a bit so its fun watching you guys ruin it too. Lol

[@stoveboltlvr3798]

You guys are like the Lenny and Squiggy of horsepower. That cart is bad ass!

[@Taylor_Buckley122s]

"But we like to party" lol

[@SugarMarie1982]

Is he really worried about a cart that’s 2 foot high being top heavy😂😂😂

[@zacharyfrank8631]

I love your videos. Youre videos have helped me in my own projects of mini bike and gokarts

[@justinremund2718]

You guys straight up look like big kids when you where pulling the ducarti. Lol. Love your show, keep up the great builds!

[@flavxer7345]

If the Ducati goes on a drag cart.... it needs to be a fresh build with the engine behind the driver! That much power going through two or three Jack shafts is asking for problems. That said I know it would be a fairly ambitious project but I for one would love to see the results.

[@gimble8638]

not that ambitious compared to some things, many of us have bike powered small cars this side of the pond tho i know that concept is slowly taking a hold stateside too :)

[@markwashington2412]

true

[@wi11y1960]

It wouldnt be that hard. They have the first one theny can use for measurements to make a new one.

[@TrojanHorse1959]

Who's that baby-faced kid trying to imitate John at the end of the video?...😜

[@williambrown6721]

I love The go kart!!!!! .... that would take balls that drag the ground to get on something like that my brother!! ... that's like flying a f 16 for the first time lol.. you two guys are awesome!!!!!!

[@MulletMTB69]

Ike's new truck is BEAUTIFUL and it sounds AWESOME.

[@strangfarmboy0078]

Put that engine on the rail

[@jackrosen1740]

They can’t! Did you not hear them?! Not enough traction and axle strength.

[@robertthackrey7101]

You’re a genius please put that motor on the drag rail

[@robbiehobbs2009]

Seems like a lot of power to be transferred thru those small set screw hubs with 3 small studs holding the wheel on. Surprised no failures there. Sick cart though.

[@Alfred..E..Neuman]

You need to put that bad boy on the dragster for sure this time!...That thing has got torque up the ass, man!!….Hopefully, it'll hold up!!

[@joegober4680]

That motor on the rail. Let’s gooooo!

[@conspiracy_0011]

I have an 89 chevy cheyanne as well but it's a step side short bed single cab with a 4.3 l v6

[@markgriffin9699]

Holly crap, he's got a Rugg!! Dude you bent the frame!!🤣🤣

[@hairycat6095]

you guys are freaking insane. i love your videos , keep up the good fun and stay somewhat safe.

[@Mightbeok]

Gonna need a bigger cart!

[@lilcman1475]

00:00 when you playin Mario kart and you get the boost at the beginning of the race

[@ratheonhudson3311]

Serious fun you guys are working on, plus the go kart has a nice growl to it too

[@katuwasa]

You guys never disappoint 👍🏼

[@dallasdelano8235]

11:32 just hammering some bolts.

[@grantrozwalka7405]

Next time need something broke iam calling ike 😀😀👍

[@Caniboss1]

Great vid guys. Y'all should weeks a 90° rod to the frame on that rear engine support so it won't bend as easily in the future. Keep up the excellent builds.

[@knightwing4]

When you guys pulled out the monster truck to tow it I almost laughed myself to death. LOL

[@muddy_armadillo]

PUT IT ON THE RAIL!!!!

[@Wik3dNuTS4k]

Wont work

[@muddy_armadillo]

Jose ricotaconachoquesadillamandillajones yeah it will if they put the dukarti axle on the rail too.

[@lilbroomstick3557]

PUT THE DUCATI MONSTER ON THE RAIL IT'LL BE FINE

[@benduboy8674]

That was a pretty awesome day for you guys looked like a blast!!!!!!!!!!

[@crankysports]

YAY!! The Sears tractor lives!! Let me know when you work on that Ike, I have tons of Sears tractors and parts! I even made it into a magazine for my collections this year :)

[@thegeek0017]

Haven’t even watched it yet and I know it’ll be good

[@thegeek0017]

I was right, and at 12:19 we can see Isaac using the patented Jeremy Clarkson method of fixing automobiles

[@Fmc-ol1hg]

How do y'all get your go-kart frames so cheap

[@ARKSYN]

They live in north carolina and know people its probably not that hard

[@mereskillz7263]

Being a guy that’s worked on demo cars/trucks, I’ve used this method of straightening a frame and also bending it to try and get the frame to bend how we want it to, whether it be bending the frame a bit to get it to level out and whatnot.

[@nicholasnelson3791]

Looking forward to the busco beach footage ! & ike dont worry man . It's a narrow few of us guys that break everything we get on 😂

[@dank9288639]

" so much torque coming off the line, the chassis twisted'

[@TylerLL2112]

😂👌🏻

[@pauls.8748]

what i would like to see done with that motor is a mini t-rex trike...kart frame and wheels in the front and single wheel motorcycle frame in the rear...and as far as i know a pocket T-rex h has never been built...maybe something worth trying guys!peace love and happieness.

[@scuzzjumper]

Paul Schmidt ...or a Tuktuk would be cool

[@wyattmartin39]

Favorite build 👍🏻

[@mikeak7331]

I’m glad he is never mad that dude messes something up or crashes. Haha. These two need to do videos together forever.

[@wthomasw2]

Damn let’s put this engine on a drag rail! It could be cool! Or a any wappppaaapappa engine

[@ignacio272]

Yeah.. All stupid engines xd but it's okey

[@7_7_5]

Give it some time

[@tylergarza8695]

they already told us why they aren't ever going to do that.

[@epicminecraftgamer1]

@@tylergarza8695 did they really say that? even after last video the top like 20 comments all said that they should?

[@eriksimca9409]

@@epicminecraftgamer1 the rail would be to weak... the axle on the rail is to weak... the engine is just to powerfull for the rail, they dont want to do it so they will not do it even if people want them to

[@zacksimmons2747]

The one guy kinda sounds like Hank from king of the hill

[@manuel-qw2js]

Who cares?

[@adriane3186]

You guys are awesome! Keep it up

[@georgecosta9935]

Good job straightening that frame!

[@josephrichichi3116]

Dragggggg raillllllllllll boyyyyy

[@z2eight]

You should have named it DU-SHART-I

[@gruzworks]

Wooow WHAT A BEAST! Keep it up, greetings from Polish GRUZ WORKS crew 😉🔥🔥🔥

[@brayanflores2972]

Looks great!

[@GoKartsorGoneFishin]

👍SMASHED👍

[@Baldys_projects]

It's a monster ain't it?

[@GoKartsorGoneFishin]

Monster bro

[@gimble8638]

lol i said about gearing up the clutch months ago lol,(your hand on a lever is way more sensitive than you foot on a pedal) i have a bike engined car so know what im talking about lol, we love them this side of the pond lol, you shaved a beard john?? does that fluff count as a beard? lol but seriously plenty bodyshop guys have beards and have no issue with masks, your learning slowly tho john and thats what its all about so keep it going, when you made the vid about mailbox air scoop on the rail you even mentioned drilling out the seam welds lol, how does that work lol???? its cool i know you meant spot welds, but like i said your learning bud, keep it up lol :)

[@spankdatazzg6926]

How many times u gotta say lol... lol

[@gimble8638]

i cant help it if some ppl are hilarious bret LOL

[@spankdatazzg6926]

@@gimble8638 lol

[@gimble8638]

:)

[@turtlebeter8760]

You sound Canadian

[@allenmckinney9533]

Holy crap John's beard came off when he hit the gas on that thing. Lol

[@MikeRemvidas]

I have them same wide ass Hoosier Rear tires on my kart 🤘🏻 Rad man ,, I love em they have some killer grip ! Kinda like my 5 finger stroker over 😂😂😂 yo !! Your kart is sick

[@DanHeilman1]

man i haven't seen one of those wallet chains in like 15 years.

[@placesmost146]

He sounds like the guy from king of the hill like if u agree

[@chaseware3181]

You mean Hank Hill?

[@placesmost146]

Yea

[@WorivpuqloDMogh]

If you dont quit that shit this instance i am gonna kick your ass!

[@claudioathlete]

JUST OUT OF HAND MAN 😂😂😂😂

[@johnmal801]

You guy's are something.. Thanks for the great video's... I love go karts... just to old...

[@dwightfoster6082]

Why don't y'all put that motor on the dragster it would be wild

[@jackmehoff2961]

Build a Propane powered go kart.

[@jaredrush6750]

I love that the tall dude's voice sounds like hank Hill. These guys are awesome :)

[@hawkeyepierce3199]

Ok so that intro right there! That should be the new intro for every video 👍🏻👍🏻😂☠️💀

[@ProMotoo]

Notification squad! Where are ya?

[@that_red_dentside3968]

Lol right here

[@joelboley2344]

HERE!!!

[@driveitbreakitfixit7496]

Got ya

[@dream2sea]

🖐

[@ProMotoo]

Ayyyy

[@joev7587]

You guys should build a mini trailer to tow the mini nascar with the mini monster truck! LIKE SO THEY SEE THIS👍

[@rangerst_870]

That way when it mini breaks and mini flies off into traffic, it wont count as a real accident, just a mini one. Especially since they would not be able to see it in the mirrors.

[@macleanlaird8374]

"I bent the frame". "Dude!" "I bent the frame..." "Duuude!" 😂

[@justgrayyy105]

I love the sound of something quickly jumping from high RPMS to low and accelerating like a bat out of hell!

[@jacystone973]

Yeah