900cc Ducati Kart Paddle Shifter Install | "Death Ducarti"

The 80 horsepower 900cc Ducati powered go kart is back! We built this motorcycle engine go kart for a TV show, and we haven't modified it much since. Today, we install mechanical paddle shifters so we don't have to take our hands off the steering wheel to shift. They help out a ton, especially on this go kart with a street bike engine.
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----USE CODE "CC10" FOR 10% OFF AT GOPOWERSPORTS.COM----
(Discount applies to mini bike, street kart, and off road kart parts only)
Spun aluminum fuel tank: goo.gl/UvqQeJ
Racing wheels: goo.gl/w9DgDU
Cable for shifters: goo.gl/gR79A2
Go Power Sports: bit.ly/3QKyODE
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

[@trevordavis4728]

Drag rail. Ducati. Doesn’t have to be permanent boys but it needs to happen. The people want it.

[@kennytivis6059]

Came here just to say this

[@sourdonkeyjuice]

they already said the axle on the drag rail could never handle the ducati engine

[@finnbarerskine-mills1739]

hell yea

[@ocp1669]

They have said numerous times in numerous ways that it's not happening. If they put an engine like the Ducati on a rail it will be purposely built for the engine. To modify the current rail to fit that engine would take way too long and if they did... it pretty much would have to be permanent. Now even with the engine that is currently own it the axles can't really handle that much power adding 20 to 30 more without the cushion of the torque converter and it's almost certainly going to bend/break something.

[@XxthecoolaidboyXx]

i would love to see that ducati on the drag car it would be so cool run it down the track fast time right there

[@Alfred..E..Neuman]

Yes, you definitely need to put that bad boy on the dragster, for sure!!!

[@jeremyellis269]

OH YEAH!

[@davidwalters4014]

Changing tire size would help with the traction problem, as well change the top end gearing! The paddle shifters seems OK, but i'd put a low tension spring to keep it in disengaged area. Maybe look at a collar from a old BMX freestyle bike for the cables. They sell short cables from the handlebars to the collar which might work as well! Just my 2 cents, otherwise I love the build all together!

[@mikesrcgarage]

Obviously you need to take it to a paved lot preferably a road racing track and bang that thing trough the gears and of course video it and upload to Tube! Crazy!

[@scottziegler8094]

I'd put a guard on to protect your arm from broken chain. That thing will take your arm.

[@Goathierbmw]

When they break they fly like crazy!! I am building a CBR600 buggy from scratch, check it out on my channel!

[@JaredHIll13]

@@Goathierbmw Sweet build man! I subbed. Checking it out now. Ive always thought of doing a similar proj. With a 750 katana engine and parts laying around 👍👍

[@Goathierbmw]

@@JaredHIll13 Thanks !! The 600 is pretty strong!!

[@papayeaststack3743]

Scott Ziegler really good advice

[@sion9611]

Or weld on a cover lol

[@wizz3r1o1]

Steering wheel? More like "directional suggestion device".

[@BigBoyLies]

😂😂😂😂😂

[@andytaylor1588]

hahahaha!!!!!

[@jacklawford6452]

Would be funny if you weren’t a furry

[@wizz3r1o1]

​@@jacklawford6452 Aw... How cute... An adorable little prepubescent middle school teen trying to be *EDGY* whilst trying to boost the little amount of ego they have by making fun of someone else to look cool on the internet. In fact I'd be offended if I didn't feel so sorry about that fact that you clearly have some insecurities regarding yourself. Maybe try being a little more original with insults if you really want to get attention dude. LMFAO!

[@wizz3r1o1]

​@@jacklawford6452 Nah. Just giving attention to the half assed troll who thinks they've one upped me with generic ass Furry insults since mommy and daddy don't appear to be giving you enough. And come on... really... A DOG?!?!... I have *WAY* higher standers then mutts and K9's dude. Please....

[@timothygary1]

Actual footage of them riding at 8:36.

[@nickgutwein9240]

Tim Gary thank you

[@katherinewalton-vecchio8254]

Thank you 🙏🏻 😂

[@thegoodchannel9688]

You just save 8 minutes of my life

[@truswalch9743]

Thx

[@aerodicus]

@@nedboase7909 Trying to drive.

[@michaelfedorsha8147]

You should dress up like Luigi or Mario and drive that around

[@skyezone3429]

Exactly

[@es2kaaay908]

Cringe

[@milkbucket2250]

@@es2kaaay908 and

[@jamestorres5582]

😹😹😹

[@GHOST-ys9nh]

I agree

[@wotever99ninynine]

i want to see them take this somewhere with more space and get on it properly, that would be sick.

[@bhaddock9277]

Never understand why I see all these interesting project vehicles are tested out in small unsuitable spaces either.

[@wotever99ninynine]

@@bhaddock9277 agreed, although i suppose in this day and age its harder to find large open spaces for free. there are too many people on this planet.. jk.. but im sure they could find somewhere, why build it if you are not going to use it properly.

[@thefacelessmen2101]

Bonneville salts flats with Craig Breedlove driving.

[@JRPW]

It's cause lawsuits. People don't want some to get hurt in their property.

[@ralphthedog1680]

@@JRPW Take it to the drag strip

[@b_mb4948]

Ducati engine + drag rail chassis = a perfect match.

[@chiefkeefas4502]

Use me as a “Top speed test” button.

[@diegootero1686]

No

[@ssix_]

airbus_737 do you want them to die?

[@glyks1550]

boing made the 737 idiot not airbus

[@chiefkeefas4502]

I knew that. I just like it that way :)

[@kingminion967]

airbus_737 511 oml

[@mikkihintikka7273]

weight distribution: front 50 back 50 left 20 right 80

[@kadenrwy]

😂 that’s stupid

[@kadenrwy]

Go to fast right and you’re flipping

[@mikkihintikka7273]

@@kadenrwy yeah you got the joke😂😎

[@googleuser1522]

Why did the chicken cross the road? So it wouldn’t get run over by Ike

[@williamcallaghan5271]

Lol

[@oliver-ht1lv]

Lmao

[@Yung_Hefty]

Thought I was the only one afraid that the chicken was gonna get hit

[@dream2sea]

😂😂😂

[@traxxaskid9200]

Ok

[@DrewEdwardBacklas]

Drag rail has needed this motor all along.

[@TheRSGarage]

So we're on lockdown now in 2020 and this has been suggested to me... *goes to eBay to look up kart frames*

[@minibikeracingdetroit4201]

I bought 2 for 500 birel/margay

[@delanosheffield3946]

Go look on offer up too

[@TheRSGarage]

@@delanosheffield3946 I'm in France, so not sure what offer up is, but actually find most my stuff on facebook groups or ebay at the moment! Just got the second kart build on our channel! They're such fun. Maybe one day I'll have a bike engine too 😎

[@kellyedington8716]

Just bought 3 mini bikes and an old yerf dog go kart 😅😭

[@TheSk8pussy]

*SEES PREDATOR 420CC ON SALE AT HARBOR FREIGHT*

[@HeirPlain]

This was 3 years ago! Crazy how far you guys have come since then! Keep it up

[@mbchannel1037]

I would prefer this engine on ur dragster.

[@Yung_Hefty]

NOOOOOOO!!! They just need to buy a new engine for the drag rail. Because I want to see the ducati kart drag race against the drag rail. Otherwise what's the point of having a drag kart if there isn't anything WORTHY enough to drag race against it???

[@Sithhy]

They said countless times that they won't put it on the rail, because that engine is 4" too wide

[@88s10Durango]

@@Yung_Hefty You buying the 670 for them ?? That 670 Is well over $ 2000 + dollors ,, it has no top end The drag rail needs a actual Bike engine and will do upwards of 125+ MPH with one ...

[@AgnotologyTV]

@@88s10Durango 125 is a very conservative estimate. Maybe in the 1/8th. Keep in mind, these guys also don't want to die or become seriously mangled. They want to keep making cool builds that are DIY level.

[@ratedredneck96]

@@Sithhy not countless times, i heard them say it once. They did say it but not a whole bunch of times

[@kamplayz3784]

This thing is faster than the drag rail

[@Mr.Potato420]

well, the drag is broken so the monster truck is faster atm.

[@kamplayz3784]

MR SK1LLFUL of course but if the drag rail was working the the cart is way faster

[@Yung_Hefty]

Everyone says "put it on the drag rail" but I say no. I want to see the drag rail vs the ducati. And I want to see both of these guys on the screen at once instead of having them take turns on who's riding and who's holding the camera. It'd be cool to see them race each other.

[@spaceybard1655]

@@Yung_Hefty lol u can't be serious that ducati is better than that 670 could ever be there is only 1 way that 670 could beat the ducati and that's if it broke

[@xzevious69]

Drag rail!

[@donreinholz8121]

You guys have me in stitches most of the time between the 900 Ducati and 750 Honda 750 carts. Stay safe and keep the videos coming.

[@lolz111000]

seeing you guys build the paddles in slightly more detail then Grind hard P.C. is a huge help in a build I'm working on. Cheers mates.

[@fan1701]

Take it out to the speed run area, dress up as Mario and Luigi and ride it at moderately unsafe speeds. lol!

[@bbrut3332]

Haha

[@stokeburner6730]

LMAO

[@Yung_Hefty]

Yes drag rail vs ducati! Ike vs (forgot the other guys name...) But this would be gr8. Don't put the ducati on the drag rail. Let them be there own go karts!

[@thegenerousdegenerate9395]

This! Do this!!! 😈

[@bitterend2603]

You guys should put that engine on the rail. For testing purposes only.

[@bricestrickland3465]

Bitter End agreed

[@MayhemMorgan]

Exactly what I was going to say

[@alexseverance2996]

Bitter End yesssssss. Was just about to say the same. Please guys, pleeaasseeee!

[@audreyposey3001]

Rail wouldn't with stand the power

[@alexseverance2996]

Audrey Posey thats okay. They are fabricators for a reason

[@ShawnWasBorn2Ride]

Ive seen you two take alot of test rides and thrash rides... but never have i seen you guys both in shock/fear/lost for words than i have after this ride. lol. pretty funny actually. But welcome to playing with big boy toys! You guys respected the hell outta that machine, where most people would get themselves in alotta trouble quick Cheers to you two and all the awesome vids and please continue more with this one especially!

[@chethaynes5802]

You Guys Are "OutStanding in Your Field" ! ! ! You put many other enthusiasts to shame. Great Job !

[@CarsandCameras]

Anybody else see the wheelie at 9:13?

[@MarcO-jv6be]

CarsandCameras yea

[@danielvanessen9520]

Yea me Nice vid

[@ToolinAround]

RAIL!!!!! Taller back tires

[@xxdriftwardxx5231]

Sure did it’s trying that’s a amazing sign

[@bricestrickland3465]

CarsandCameras you should put the motor on the mower

[@MattsMadnessOfficial]

I think if that engine was on the rail the rear axle would break the vtwin you guys had on it was awesome but the ducati would be mental...I am all for this engine on the rail lol

[@c4lv1n26]

the axle would snap. it could barely hold the 670 even as it is with the flexing

[@randomrcprojects3754]

Or put a snowmobile engine on it

[@jcz232321]

Man oh man! Are these guys having fun and "living the life" or what! Subscribed!

[@derekkennedy7346]

I suggested that you put on paddle shifts on that cart a long time ago but a year ago I'm glad to see you guys finally did it that thing looks to be working suite keep up the good work guys love those videos keep it up

[@deathgearo8502]

You should put that on the drag rail

[@Yung_Hefty]

NOOOOOOO!!! They just need to buy a new engine for the drag rail. Because I want to see the ducati kart drag race against the drag rail. Otherwise what's the point of having a drag kart if there isn't anything WORTHY enough to drag race against it???

[@Yung_Hefty]

These karts are one of a kind. They should be different. And wouldn't you want to see the drag rail vs the ducati??? Not only is it a good match but you'll see both of these guys on the screen instead of one of them behind the camera.

[@Sithhy]

They said countless times that they won't put it on the rail, because that engine is 4" too wide

[@deathgearo8502]

Ok they make a new rail for it

[@Blurgamer17]

@Savage Teddy Bear dont copy and paste

[@dronefly6403]

you need to put that in the drag rall.

[@lesaatuatasi6267]

It sounds wicked af!!👍🔥

[@daviddepace3746]

Ducati Kart! Insane power! Love the project! Keep up! The great work! Much appreciated!⚡👌👍

[@jakesrc7907]

The drag rail would be perfect for it

[@mavos1211]

PUT IT ON THE RAIL!

[@Les__Mack]

As always, I love your videos! Thanks so much for making such fun videos!

[@themenace203]

Amazing...and terrifying. Puts a smile on my face everytime you rev the engine.

[@bradygd]

put that motor on the drag rail.... now that makes more sence

[@darcy2534]

I second that

[@tafarid.7347]

*Sense*

[@OBSLIFE-sf4sx]

I third that

[@jansenhobbs2214]

brad ornat thinking that

[@fireobie117]

Yep

[@OpenRoader]

Next project: LS Swap-Cart

[@wyattlarrick3246]

LS SWAP EVERYTHING!!!

[@crazymessedupcollaboration8921]

Random Channel dair you to Ls swap a rx7 and take it to a car show

[@desmondmoonbear4143]

@@crazymessedupcollaboration8921 Rotary swap a Corvette

[@BassistUndStolzDrauf]

how about a vette cart?

[@JohnDoe69523]

Ls everything xD

[@nickbaddorf2673]

I hope tall make more videos with the ducarti! This is my FAVORITE EVER cart y’all have made!!

[@robusmc1713]

Wow that put's a Smile on my face , I Love it, good job guys

[@paradigmmirror4147]

My suggestion.......remove engine and attach it to the drag rail.

[@jacobmollernielsen7198]

I agree

[@georgesfishingadventures3974]

We need to see this happen

[@jeffreymrrs150]

They would half to strengthen the rail. Especially the axles. That engine would snap everything like tooth picks

[@polaris6644]

@@jeffreymrrs150 an axle thicker than an inch could hold up to it. And they could likely do a driveshaft and chain system similar to the hot rod cart

[@BigDame727]

Definitely replace the sand rails engine with this one

[@HatchiSan58]

I dig your guy's videos because you try to have a project working before the end of the episode unlike some other channels that never finish a project, cheers. This Ducarti is RAD!

[@UnTamedMustang]

Other channels dont get support so they either dont finish it Orrr they dont post about it. Why post if noone cares.

[@GnonplussedGnome]

I love these guys, they don't know what a box is. Monte Alex and I were like that back in the early Seventies.

[@demetriuspalmer2992]

Man I love your guys channel I'm gonna be building me a shifter kart or street legal Go Kart out of an NA Miata, I just love this type of stuff its a joy and passion

[@TheGto389]

The fact that it's sketchy and way overpowered is exactly the reason it's so cool & interesting!!!!!!!!!😀

[@chadwhite1198]

Well said!

[@COOLDAN21]

This is fake

[@castin5244]

What you guys need to do is get rid of the right paddle shifter, make the left paddle shifter the CLUTCH, and make a column shifter on the right that shifts up when you push it forward and downshifts when you pull it backwards.

[@stratosfever]

Casman that’s an even better idea, would definitely give more control along with my comment of a bigger racing seat with a harness so you feel more secure While driving

[@castin5244]

@@stratosfever yeah, that's the same setup that racing karts use.

[@imagineaworld]

Thats how they come when you buy it. I want to see it this way :)

[@masterofnonetv8361]

Use a marine push pull cable.

[@dustinshort6207]

@Daver G don't need clutch to shift if you do it right. Also before they had to take their whole hand off, grab another bar and then back to the steering wheel. Having both hands still touching the wheel makes reacting to an emergency much easier

[@MooresRacingandOff-Roading]

The fact that you guys built something that is totally unreasonable and totally unsafe that you can’t even use it to its full potential is absolutely amazing and imma have to do the same thing.

[@benjaminevans1171]

Videos like these make me go on Craigslist

[@andrelafond7474]

Put the engine on the drag rail, it would be so much faster

[@that_dude_with_the_torino1171]

Hol up... the 670 is seized... and the Ducati has 20 more horsepower... stay with me here... *put the Ducati on drag rail*

[@monkeydude3987]

THIS FOR SURE!! :D

[@iMatthewWilliams]

He already said they didnt want to do this I think

[@Yung_Hefty]

NOOOOOOO!!! They just need to buy a new engine for the drag rail. Because I want to see the ducati kart drag race against the drag rail. Otherwise what's the point of having a drag kart if there isn't anything WORTHY enough to drag race against it???

[@Yung_Hefty]

They also said they don't want to put the ducati engine on the drag rail because it's one of a kind. Just like the drag rail should be, one of a kind. And instead of watching one of them drive a kart at a time wouldn't you want to see them race each other with the drag rail vs the ducati???

[@Sithhy]

They said countless times that they won't put it on the rail, because that engine is 4" too wide

[@anesthetized7053]

this dude was going absolutely balls out i give him props for giving us what we wanted

[@brendanhagan6195]

Dang man, I haven’t watched a video since they had 100k subs. They really blew up! Great work keep it up!

[@johnmatthews1802]

Put that motor on the dragster and make that dragster look like something real

[@MendezMotorizedBicycles]

Take it down the drag strip 😎

[@padyakhero3629]

john matthews that’s also what I’m thinking

[@joemontgomery6658]

the frame is too small

[@406nova6]

Like I said yesterday put A Motorcycle engine on that rail ..... No more stupid little engines👍👍👍👍👍👍👍

[@kyleglenn4893]

Its too big otherwise I'm sure they would

[@Hermiwalle]

dude have you seen the 670?!?!?!. that ducati engine is like the same size if not smaller just in a different packaging/ style

[@kyleglenn4893]

@@Hermiwalle I mean they have said in video it's too wide to fit on the rail and the kart is a one of a kind being there 2 reasons they wont put it on the rail maybe they could use like an old Harley motor but as I say that I think that might be too big for them as well

[@ProductionsNate]

They said the axle on the dragster cant take anymore power. It will take some more modification to make that happen.

[@blooiefps9304]

@@kyleglenn4893 to be fair -just about- every single thing they make is one of a kind soooo.....🤣🤣

[@jimmyhamm6041]

At 11 minutes in his friend called it all off his test buddy scared him going the complete lap . That was a great finishing & fast lap. Great run. 🎉👍

[@SPMPchannel]

I love the sound of that engine!

[@oumajordaan3958]

I want to see that 900cc motor ons the drag rail and then you must take it to the trak

[@loosescrewlab5379]

Yes ducarti on the rail, hands down!!! Be the best of the best, talk bout 8.98, be more into the 7s

[@loosescrewlab5379]

Think bout 670 is clapped for now, so slap the ducarti on there call it the ducarti rail

[@reddragonstacking5247]

Yeah it would be awesome to see the Ducati on the rail all they would have to do is put a bit more support for the axle as it had a bit of flex even with the 670 so if they could put support right to the back wheels or thicker axle and proper covers over the moving parts inside the driver's cockpit and then call it the Ducati Death Rail

[@timmytimmerman4334]

Loose Screw Laboratory you said in past vids that the axel can’t handle it get a new axle that can

[@loosescrewlab5379]

@@timmytimmerman4334, that would be Matt's madness that said the axle would break, scroll down lol,

[@w.nurmi58]

they put in all that work on that frame, no way!

[@scottofford3061]

You guys are nuts! Enjoying the knuckleheaded endeavor

[@jwasto2532]

when ike or john is scared to drive something you know it's fast

[@thedude7726]

Make this the drag rail guys

[@ocp1669]

I wouldn't mind taking it down the 1/8th, but not keen on the 1/4. If it were mine, I'd extend the wheelbase out some and at least 6" wider, and putting some larger diameter and wider slicks on it, and potentially a roll cage. Just to give people an idea on how insane this thing is. Let's just be conservative and say driver + kart is 400lbs, at 80HP that's a HP to weight ratio of 0.2. A Veyron is around 0.24 A stock Corvette C5 is around 0.1. The closest car I can find without tons and tons of digging and this is fitting... The 2017 Dodge Viper SRT and that is 0.19. So this kart is in the same power to weight range as a Viper. Anyone that has ever driven a Viper should be able to relate here. Now if by chance the kart and driver is closer to say 320 lbs which I am thinking would be about right, then it's closer to 0.25 so better than a Veyron.

[@JumbleDrops]

AHHHH WWWOOORRDDSS

[@VasilyBuilds]

Right on! They won't set it up for the 1/4 tho. It will take a lifetime to perfect. Longer wheelbase and the engine should be mounted in the middle on top of the axle for maximum acceleration. Also with nitrous, a tune, alchlohol, and springs and cam it would be up to par with f1 cars!

[@ocp1669]

@@VasilyBuilds Yeah I am sure they wouldn't take it down the 1/4. As for mounting it in the middle? The wheel base would have to be extended quite a bit to do that properly. You really don't need to, just need to get the weight balance about right while sitting in it. Get a few bathroom scales put one under each tire get in it and move the engine and seat around until the back rear tires are close to being equal and that should cut it. Definitely need to widen the track as well it should be a little more stable and with the wider track you can fit wider tires. Now as for getting it on par with an F1 car? I assume power to weight ratio? Not including Kers an F1 car is around 0.47. To get about equal to that the kart would need to have around 190hp if total weight is 400lbs or about 152hp if it's about 320lbs. That's quite a bit of power, if they think it's scary now, with that much it would be insane.

[@bob8086]

Well with this mindset they will just end up building an Ariel atom that’s far from street legal... I’d keep it as a go kart and make the power more useable. Improve the design rather than make a whole new one

[@sonandsanford4963]

That's the best sounding kart I've ever heard. 👍👍

[@meeterhead462]

Go Kart ????? You mean . Gone Kart .. . That thing is a beast !!! All that power, you cant be skimpy on the quality of the build ... im looking forward to seeing more.

[@Bryaniskey]

Why did the chicken cross the road? Cause Ike was coming in hot on the Ducati kart 9:13

[@stores1553]

B-rad1storlast 😂

[@Shoelace349]

Does anyone else find the sound of their tools hitting the floor satisfying...?

[@saljammedia9951]

No it annoying

[@ME-ru4hv]

WTH you guys make this look so easy!! I'm making one this weekend!

[@jamesreaves5534]

I watched the previous video when you first install the engine on to the cart you should put all these in chronological order so I and others can watch all of them in the correct order and see the progress you're making. I would love to see the final product. The finished cart. If you could take it to the track and get a time slip for 1/8 or 1/4 or both. That would really be nice. This is really cool. I'd love to see you put a Kawasaki kx500 two-stroke dirt bike cart like this. Don't know if it would be faster on Top bend but it would be quicker for short-distance two strokes are always quicker. when they hit that power man that little burst of speed they give you when they get on the pipe is unreal. Never been on a four-stroke record do that. Also a banshee engine with 2 cylinder two-stroke 350 would-be killer on a cart Honda has a CR500but they don't have the power valve like the KX does and I don't think they have as much total horsepower either. Great video. God Bless 🙏😇 Y'all. Jimmy in NC....

[@Aaronzahller]

Put that engine on the rail!!

[@stuntslikeeveryday]

These kind of videos I'd like to see more, this makes engineering looks great. As a kid it looked so boring that I never did, but by watching it now it's like way too much fun! I'm 24 years old now, so who knows? Really nice video

[@junbug1love]

The beautiful sweet satisfaction of the Simplicity and Afterglow of driving a go-kart that glorious vibrating Vibe of Awesomeness that just says... yesssss!! my muscles & Bones are $miling! 😎

[@johnberry8117]

You guys are 2 wild n crazy fabricators! I love it! Please Be careful n try to keep the rubber side down!

[@yaguarete79]

11:03 lol I got the same impression. That's a hell of power you got there. 💪🏻👍

[@turtlebeter8760]

Put it one the drag railYou specifically said you wanted to wait till the 670 blew up before you put a new motor on it

[@MayheM_72]

The gods have spoken. The 670 is dead! Long live the Dragati!

[@Puffalupagus360]

Isaac is a baddddd boy. Props for being able to handle that monster.

[@danauwema]

The sound alone makes me smile.

[@chrisboughnou6156]

I would so drive this down the strip. Great video and very creative. Truly impressive guys.

[@SpeedyMC14]

take the ducarti to a empty parking lot, or a area with little to no obstacles and try to see how fast you can get it before you have to back off, also try and fix the traction issues so its a little bit less of a death machine, but i'd really like to see more of this cart

[@alim9658]

Switching between the different cameras while the go kart is moving makes me very motion sick. Don't know if it's the same for anyone else but thought it would be something to mention. Consistent long videos are also just nicer to watch in general which is kind of what we all came here for. I don't think we need to see the chain spinning around either. Great video though guys and good work on the go kart. Wish I could have a go on that beast!

[@tonynorris7042]

I know I've said this before but WOW ! WHAT A MONSTER !

[@mopedmessiah]

Boys.....I just thought of an immortal being who possibly has the courage to wring that thing at a drag strip, and who would create the best collab ever.....*drumroll*.....COLIN FURZE

[@mohamdan1443]

Great idea that guy is a dare devil

[@theredmonkey8280]

Oh yes contact him please

[@rainforestbushcraftfoodcha4888]

Dude i dont think we could handle that combination!!!!!!!!!!

[@stevesievers1248]

My son offered to run it at Bonneville. I wouldn't call him a "dare-devil" though. Even "insane" would be a weak description of him. More along the lines of "Bat Shit Crazy" I'd say. He and his brother took the extra engine for the drag boat and somehow wedged it into a Honda Civic and took it out too the flats. A car that weighed no more than a popcorn fart with a blown, alcohol injected, all aluminun, 468ci Rodeck in a Civic. We have no idea what the thing would do. A mile and a half in, at 160, it started to disintegrate. Literally. The hood came off then the left front fender abandoned ship just before the plexiglass wind screen came in on him. He decided that it was a prudent time to lift. But he got 160 and wasn't in top gear yet. When we got down to where he'd finally come to a stop, after picking up car parts along the way, he figured he duct tape everything back in and try it again the next day. My daughter-in-law, upon hearing that, told him in no uncertain terms that he had two choices. Either "put the damned thing back on the trailer and go home, or find a good divorce lawyer in Monday morning". He's still married, but she hasn't quite, got him fully reigned in yet. She found a baby carseat out in the shop that had a custom frame under it complete with go-cart tires and wheels and a chainsaw engine. Needless to say, he's not allowed to be alone out in the shop with my grandson anymore.

[@kostasmar1990]

YES.

[@justinacker745]

you guys should take it to the drag strip

[@williamhenrygeier993]

This really is one amazing looking freak'n monster. The best of perfect kart designs witha boastful Ferrari F40 typa sounding engine.

[@prematuredgravy8033]

*So basically, my gocart sounds like a Ford Mustang*

[@U2Jaime1317]

Hell no a desmo engine don't sound like those shits. I had a 900 ss cr and my bro has his legendary 748. Don't you dare say that. I also have 3 Ford truck motors sitting in the backyard broke now from Engine swaps we've done. They suck ass man

[@prematuredgravy8033]

@@U2Jaime1317 its a joke

[@U2Jaime1317]

@@prematuredgravy8033 no. I'm pissed

[@prematuredgravy8033]

@@U2Jaime1317 ok?

[@U2Jaime1317]

@@prematuredgravy8033 I'm gonna go kill someone now

[@ethanengland7268]

I’m with everybody else, More power than 670, Put it on rail plz.

[@Ratkill9000]

The current rail isnt up to the task. Rather not watch them kill themselves on a rail that is not built for the power and speed.

[@MegaFPVFlyer]

They've addressed this before, the rail isn't structurally sound enough to handle 80hp.

[@lethaldiezel8839]

It will be nutty but fun

[@SoI_Badguy]

@@MegaFPVFlyer The 670 that's already in it makes probably the same amount of torque...

[@MegaFPVFlyer]

@@SoI_Badguy Sure, it might not crack in half as soon as they open the throttle, but that roll cage would be absolutely useless if something happened and the rear wheels locked (or got covered in oil) on the big end. I think the real reason they don't want to do it is that those kinds of speeds are starting to venture outside of "fun" and into "stupidly dangerous." Regardless of whether it's possible or not, they've very clearly stated that they're not going to do it.

[@toshayonguard4253]

Take that Death Machine to the track and see what she will do in the quarter mile....Then swap that motor into the rail and Go Faster 😳🤪😁

[@jameswarren423]

Man that thing is a beast 🤩that motor on the dragster would be awesome 🤷🏻‍♂️great video 👍🏼🤩

[@kelkev85]

I had a ducati monster 900, best sounding bike of all time!

[@stormtrooper4974]

Put the Ducati on the rail please that would be so cool

[@juantabby4787]

You can see the comments are piled up to do what I’ve asked you to do so many times for so long is to do the obvious. You guys are driving me nuts with procrastinating, you know you’re gonna.

[@revelationakagoldeneagle8045]

That thing is a MONSTER 💀💀💀 Crazy Cool ✌️😎

[@warrenharston5886]

Crazy but love it. Nice job guys 👍👍

[@eddyoddrod]

Death wish. Put the ducatti on the rail with a better stronger drive system. Or build a cart with a cage. Crazy crazy crazy!

[@unprofessionalfarmers]

You guys should take that thing to the drag strip

[@Last_one_before_I_go]

Yeah, for Once. Last. Ride.

[@kylemilford8758]

Wait, I thought they did? For the TV episode.... It ran a 8.98 in the 1/8th with major traction issues

[@truth2500]

That thang is serious guys. Great job!

[@grdray2138]

Like Accepts song said..."Balls To The Wall". That is Bad ass, thanks for showing.

[@floppycopy1284]

Put it on the drag rail with jr dragster slicks

[@DanBuilds]

Yup, still the best channel on KZbin.

[@dream2sea]

danbbb 👍👊

[@woodydowler1594]

Awesome job guy's 😊

[@lespaul9078]

I love how the subtitles say "Applause" when the cart is driving by in the intro