91 firebird lower control arm removal and install part 1

[@dalecolbert232]

Good video. But I have seen where you don't tourqe down the control arm bolts until the wheels are on the ground otherwise the control arm will bind

[@amberericjones5694]

I torque down the bolts or use the impact on them once it's all bolted to the knuckle. Then I finish tighten the 2 bolts on the back of the control arm

[@don_dota]

Usually 3rd gens sit too low to the ground sometimes with stock oem wheels to get underneath the car and tighten the control arms

[@dalecolbert232]

Where did you get the new control arms?

[@amberericjones5694]

I think off eBay if I remember correctly

[@amberericjones5694]

Had to buy them from a S10 cause for some reason they don't sell them for our cars. The S10 is the exact same control arm

[@dalecolbert232]

Any specific year? I heard the steering stop is different and you would have to modify it

[@amberericjones5694]

@@dalecolbert232 that I'm not sure

[@don_dota]

@@dalecolbert232 shouldn’t be if the diameter of the control arms are the same