Thanks buddy awesome very clear and simple explanation kudos
@magicone93272 жыл бұрын
Small terminals are the power to the coil in the relay that closes the switch and then allows battery power to go thru the relay to the device bring powered.
@willwalker68963 жыл бұрын
awesome video really simply explained thanks!
@jose57933 жыл бұрын
Love your content! Great job!
@ParisEnterprise3 жыл бұрын
i agree. this guy doing very well... thanks bro, for sharing knowledge
@sharkparty10272 жыл бұрын
Can you please show how to test the trunk solenoid? My trunk lines/wires aren't broken, I can hear the truck click, but it doesn't open. Thanks in advance.
@JokersSsmile2 жыл бұрын
❤️
@widtrak773 жыл бұрын
Is it possible the relay could work when first energized but fail after being energized for a while or heated up? My condenser fan usually starts up when turning on the AC but will stop after a few minutes or driving for a bit. It will not restart until I turn off the AC for a bit and then back on again. My mechanic suggested that this particular relay could be failing causing the fan to cut out
@blueballsbkueballs2 жыл бұрын
Having the exact issue. Was you able to find a fix?
@widtrak772 жыл бұрын
@@blueballsbkueballs In my case my orifice tube was not working properly causing erratic pressures in the system. As a result, the pressure switch was turning the condenser fan off. My relays were fine.
@blueballsbkueballs2 жыл бұрын
@@widtrak77 thanks. Cold start condenser fan works , but after sometime it stops & relay is over heating. If I press the relay or wiggle, fan starts again.
@widtrak772 жыл бұрын
@@blueballsbkueballs you likely have a poor or dirty connection at your relay/fuse box
@blueballsbkueballs2 жыл бұрын
@@widtrak77 could be but I am currently running radiator on deinoised water for flushing, I need to buy a new relay & coolant and see it helps. Thanks.