A/C Leak Testing Using Compressed Air, Soap and Water (any car)

For those of you worried about using compressed air because of moisture. My question to you is, what do you think is in a system that has a leak and all of the refrigerant is gone? Atmospheric air and moisture! This is a tried and proven test for me over the last 25 years and it is one that everyone can do. Who has a bottle of compressed nitrogen sitting around anyway, especially when you only do a few A/C jobs a year.
Tools used
- A/C Manifold Gauge Set
www.jbtoolsales.com/atd-tools...
- Vacuum Pump & Gauge Set Assortment (least expensive kit I could find that I felt was descent and it is the one I use)
www.jbtoolsales.com/fjc-9281-...
- 3.0 CFM Vacuum Pump (same pump that comes in the kits listed above)
www.jbtoolsales.com/fjc-6909-...
- 6 Gallon Air Compressor 150PSI
www.jbtoolsales.com/bostitch-...
- Spray Bottle W/Sprayer
www.jbtoolsales.com/meguiars-...
Car Wash 64 oz
www.jbtoolsales.com/mothers-0...
- R-134a Can Tap Valve
www.jbtoolsales.com/mastercoo...
- Bayco NSR-2168B LED Rechargeable Work Light - 600 Lumens w/3 Magnets Lithium-ion Battery
www.jbtoolsales.com/bayco-nsr...
Related videos
- HVAC and Cooling systems troubleshooting and repair
• A/C and Cooling System...
- A/C clutch not engaging - 2005 Honda Odyssey
• A/C clutch not engagin...
- A/C Leak Testing and Repair part 1 - 95 Jeep
• A/C Leak Testing and R...
- - A/C Leak Testing and Repair part 2 - 95 Jeep
• A/C Leak Testing and R...
- A/C Leak Testing and Repair part 3 - 95 Jeep
• A/C Leak Testing and R...
- Air Conditioning Not Working (system performance, leak test) - Honda
• Air Conditioning Not W...
For more information on this topic, I have written a “field manual” called Engine Performance Diagnostics which is available at www.scannerdanner.com as an eBook or paper book.
Want even more diagnostic training? Whether you are a DIY trying to fix your own car, someone looking to become an auto technician, or a current auto technician that wants to get more into diagnostics, subscribe to ScannerDanner Premium www.scannerdanner.com/join-sc... There is a 14 day free trial.
On ScannerDanner Premium I will bring you right into my classroom at Rosedale Technical College. You will find page for page lectures taken right from my book as well as exclusive classroom type case studies. What is so special about these classroom case studies? I pull live problem vehicles directly into my classroom and we troubleshoot them in real time, using and applying the theory and testing procedures we learn during the classroom lectures. There is no better on-line training of how to troubleshoot automotive electrical and electronics systems anywhere!
Disclaimer:
Due to factors beyond the control of ScannerDanner LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ScannerDanner LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ScannerDanner LLC recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ScannerDanner LLC, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ScannerDanner LLC.

[@ScannerDanner]

I NEVER MIXED COMPRESSED AIR WITH THE REFRIGERANT! IT WAS EMPTY FROM A LARGE CONDENSER LEAK! Some of you want to argue, that what I showed was unsafe. Please tell me how an empty system, filled with compressed air, is a safety concern. I'm not asking about the supposed contamination. I am asking about the safety side of this procedure. I certainly do not endorse unsafe practices. Here is something I found on a Google search from some engineer forum... HFC-134a is not flammable in air at temperatures up to 100 deg. C (212 deg. F) at atmospheric pressure. However, mixtures of HFC-134a with high concentrations of air at elevated pressure and/or temperature can become combustible in the presence of an ignition source. HFC-134a can also become combustible in an oxygen enriched environment (oxygen concentrations greater than that in air). Whether a mixture containing HFC-134a and air, or HFC-134a in an oxygen enriched atmosphere become combustible depends on the inter-relationship of 1) the temperature 2) the pressure, and 3) the proportion of oxygen in the mixture. In general, HFC-134a should not be allowed to exist with air above atmospheric pressure or at high temperatures; or in an oxygen enriched environment. For example HFC-134a should NOT be mixed with air under pressure for leak testing or other purposes.

[@Travelingman-1980]

ScannerDanner some one touch a raw nerve. I also have seen in a Mazda service manual a caution not to use compressed air due to possible ignition of gasses. In Australia we use inert nitrogen to test the system's compressor function, but do as you do bro. The system should also be flushed with compressed air and solvent. Also I found many videos demonstrating how the charging system of a vehicle works, your last explanation was not clear in your last video due to language difference such as "control wire". Nevertheless the control wire switches the solenoid and the main power wire from the battery goes to the B+ post. Thanks for clearing that up bro.

[@SmittySmithsonite]

If you caused an unsafe condition by using compressed air, then I'm going to buy a lottery ticket tonight and WIN, and then I'll take you, and ALL the subscribers of this channel on a cruise with me next week. :) In other words, we've got a better chance of being struck by lighting ... TWICE ... and winning the MA state lottery ... in the same hour.

[@cwj9202]

The Google search quote is straight out of the Material Data Safety Sheet (MSDS) for Dupont Isceon M099, i.e. HFC-134a. The take away from that would be to not expose the pressurized, hot air/HFC-134a mixture to a flame or, secondly, use a compressed bottle of 100% oxygen to pressurize a refrigerant system with entrained HFC-134a. So Paul is perfectly fine to utilize shop air. Great video.

[@ScannerDanner]

You summed that up better than I could have. Thank you!

[@carlosmejia5728]

Nope, R134A is not combustible in the atmosphere , so putting air in there works the same way, the negative point by doing this is that you are introducing water vapor in the a/c system but he explained that anyway there was a leak therefore air and humidity were in already.

[@swfloridacarguy1987]

Paul, I trained on Automotive AC at the GM training center in Tarrytown NY many years ago. Over the years as a Chevrolet Tech I worked on many different systems and always took the advice of the instructors. They had developed many different techniques that weren't in the book and still aren't. Please continue with your advice no matter what the criticisms are...

[@scientist100]

What about you share those not in the book? This is a good test but I feel like it is very hard to spot small leaks. In my case I was losing about 10 psi @100 test pressure every 5 minutes. This is a very small leak, cannot hear it and would not be detected easily. My next step is to inject dye and see where it is.

[@harryazzole7814]

@@scientist100 dye injection should've been your first step. I find leaks in 10 minutes or less. Don't have time to spend 2-3 hours chasing a leak at high volume shops

[@scientist100]

@@harryazzole7814 only if you can see it. Anything after the firewall requires time that the dye test won't show. I can hear a large leak right away with ease, dye would take longer time to inject and wait for it to show.

[@AlmarbadiT]

What do you mean by dye guys ?

[@iamwan939]

mr Florida guy may I ask u a question.. gmc truck 2015 yukon expansion valve is leaking replaced the seals on expansion and the hoses twice and cleaned surfaces.. still leaking any advice will help..it's driving me insane

[@dandiy4958]

I had a similar vacuum leak issue on a 2003 Envoy that was dead empty, tried the compressed air at about 70 psi and found the leak in 5 seconds, litteraly hissing out the condenser, no soapy water needed. This weekend will replace the condenser . Great tip and videos as always. Thank You!

[@MarioMartinez-xl6px]

Man first off just want to say thank you for your content and the information you share. I was able to find the leak on my wife’s 2011 Chevy traverse and replace the parts that needed to be replaced. The local shop wanted an arm and a leg for the work I was able to get done at the fraction of the cost by watching your videos and investing in a set of gauges and a vacuum pump. Thanks to y’all my wife’s SUV is ready for another hot summer in the high desert of CA.

[@8953147]

Both of your A/C troubleshooting videos using compressed air, with explanations of the various systems, is outstanding Paul!! You have made this complicated system a workable one for us DIYers, and plenty of thanks to your fine son in helping his dad too!!!

[@ScannerDanner]

Thank you jake ounce! And I appreciate your comment about my son too. He has been a HUGE help to me.

[@motazuk]

Most of your tutorials are 100% money makers. I have used your tutorials for research, diagnostics and repairs. All without issues. Got nothing but great appreciation. Thanks man!

[@ScannerDanner]

thank you so much!

[@damiensmith8678]

Thanks for this it saved me wasting expensive refrigerant. I put the money I saved towards a small compressor instead. The stethoscope tip from another reviewer will help in hard to reach parts of the system. I cant do any physically demanding work on my car due to poor health. Your video has empowered me to tackle this job myself. I will gain that sense of achievement from doing it myself. Thanks.

[@gerardlunow567]

Great video. Your comments are right on. Most show a simple video they copied for elsewhere and don't really understand it. You actually thought this whole thing through. Smartest video so far. Thank you!!

[@alloutofdonuts3998]

This is probaly one of the more helpful videos I've come across in my searching for the last week about the proper way to do this.

[@randallposey4392]

It is me again Paul. This is the second video I have watched and I like your common-sense method of diagnosing leaks. I am 71 but interested now in learning how to diagnose and repair vehicle AC systems. Gotta keep my mind plugged in. Thank you for taking the time to produce these free videos. May God richly Bless all that you do and your Family as well.

[@demoking1422]

Agree with you good common sense information that a guy can do at home with the stuff he has I also know people that have used compressed air to find leaks they never caught on fire or exploded and when finished they had cold air and no customer complaints Thanks Scanner Danner

[@foreigner2thisworld]

Fantastic video! Thanks for taking the time and effort to make a quality production. Is helping me much in my A/C challenge with my 1996 Suburban!

[@robertpagel5467]

I will say your videos on ac troubleshooting and repair are the best anywhere. I’ve been quoted $3500 to start on ac fix. With your help I’m under $1000 with rear evaporator core, compressor, r-134, and vacuum pump and manifold gauge. Thank you for videos!

[@rss608]

Good to see that you actually tracked down the problem... love the use of compressed air instead of nitrogen. quick and dirty.

[@samueladams7798]

.......Nice to hear someone speaking clear english while doing a video. Some of these tech videos move so slow relaying pertinent information , that I can't even get through the first thirty seconds of the video. Thanks for an informative production.

[@ScannerDanner]

thanks so much! I like to hear comments like this. I am a teacher after all and this is good feedback

[@SurvivalInFlames]

These past 2 videos you've posted on ac diag are the absolute best on KZbin. Please keep them coming brother:)

[@brucemills9146]

Have been doing A/C for 42 years .I have been using compressed air with moisture filters , air used to paint cars, Must use moisture free ai,r I have seen air hose blow out a ounce or 2 of water that would be impossible to vacuum out of the system .1 system is empty or. Recover system .2 add 150 psi paint air.3 I now use a Robinair ultra sonic leak finder , it hears leaks finds leaks to 1/2 ounce per year. then use soap and water to show customer the leak used soap and water before I had the Robinair ultra sonic. I do over 1000 cars a year.

[@Gurpreetiam]

Thanks. That was my concern.

[@rcaddict3815]

Does the dryer/ accumulator have to be changed when the system is open to air for a period of time?

[@942doc1]

​@@rcaddict3815receiver dryer as in this case yes. He said it in the video too

[@robertmattison1282]

Just found your channel. Great job. Audio excellent, Video really good. Thanks for upload this onto youtube.

[@kylehasten8275]

Thank you for this video. Been fighting a leak on a completely new replaced system on my 86 mustang. Wouldn't hold a vaccum so I could add refrigerant. This let me find the leak in the brand new pressure switch. Replace switch, now it holds vacuum.

[@billmitchell7785]

Love this video! Pulled my system apart yesterday, removed and flushed out all the lines and added a new compressor, condenser, expansion valves, etc. Buttoned it up today and pulled a vacuum, but it wouldn't hold very long. I was weighing my options on how to find the leak (including pulling everything apart again), found this video, pressurized system to 50 lbs, and voila! One of the dryer lines had a slice in the new o-ring and the connection was bubbling. Swapped out that o-ring, and now it holds a vacuum. Thanks so much for posting.

[@ScannerDanner]

awesome Bill! That's what I'm talking about. Thank you

[@ryanyoungs2622]

Great video never thought of using compressor air.

[@elioselectric468]

About to do this procedure later today or tomorrow... at least before it gets too hot out. Thanks SD always the best troubleshooting tips on YT

[@bryandavis341]

I like this method, I have found a lot of hard to find leaks like this. I don't worry about moisture that is what vacuum is for. I do it a little different but end result is the same. Great video as always.

[@mid-thumbautomotive9716]

Good information. I've also had pretty good luck using an electronic stethoscope to track down major leaks after pressurizing.

[@davidjames7323]

Thanks for the video despite the youtube trolls the rest of us appreciate what you have to share.

[@mikehargrove4356]

Professional, informative video! Many thanks from a long time shade tree mechanic!

[@EddieLowXScience]

I was gonna bite the bullet and buy one of those ac leak dye. Now I'm gonna go ahead and pressurise my ac system looking for leaks. Cheers man!

[@jonathanderbidge6819]

I came looking on how to introduce compress air to my impala ac and this video did not disappoint. I didn't even type Impala and it was the first thing that popped up. Awesome work guys

[@jonathanderbidge6819]

I would also also like to add. The cheapo trigger pull freon gauage valves that you get on like an AC pro has the same female threads as a air compressor male connector

[@wysetech2000]

It's funny how some people are such experts on Y-Tube. Experience means nothing. Better not undo a fuel line, two drops of fuel might explode into a raging inferno. I have been repairing A/C systems for over 40 years and I have never had a problem with using Nitrogen, compressed air, electronic or refrigerant (R-12 days) while testing for leaks. In real life repair you do what you have to do within the limits of your knowledge and experience. As far as moisture goes, on the assembly line they pump em down for 10 seconds and then fill them. I guess that's why they install a drier. A tip for soap, Dawn liquid dish washing soap seems to make the most bubbles. Well done, Paul in my opinion.

[@46lfries]

You are correct if it working on a car that's been around a long time I would do two things change the expansion tube or clean it change the filter drier accumulator because of a bag of dust in the dryer degrades and can break I've seen that and you got one hell of a son of a b**** in mess

[@charlesmartin7347]

Wow thanks so much for sharing your knowledge this saved me a bunch of money. Blessings and more blessings to you and your family

[@Kaibil66]

Excellent video, great job, very, very, very professional.

[@arielarangohincapie9738]

Very helpful video. Very well explained. Thanks

[@SY-oj1qy]

Thanks for sharing, a pro always makes it seems easy

[@gordjohnson70]

Scotty also pumps air into an empty system. He has a very sensative listening device with a long wand. He can HEAR the slightest hisss of leaking air thru his headphones. Anyone who took the time to watch his video would know that. Nobody knows everything. There are new tricks to learn every day. His new method even finds leaks behind the dash.

[@Just2362]

Used this method on my 2000 ford Explorer and found the body of the compressor leaking ever so slightly. Thanks Paul.

[@rrmech11]

Hello my friend Paul I always wanted to see how someone can check ac leaks with compressed air. Absolutely a awesome video Paul. Your son is quite some camera man. God Bless the whole Danner family

[@ScannerDanner]

For sure! And I've been using this method for 25 plus years. I'm spite of the supposed issues with it that others have.

[@tomasnewson6744]

My main job is mobile car AirCon. Over here people are under the impression that car AC systems just need ‘ topping up ‘ every couple of years. As if the refrigerant is a consumable substance... Anyway, this video is brilliant, and is exactly what I was looking for a couple years ago when starting out. Really thorough and full of facts! The only thing I do differently is that I use oxygen free nitrogen to pressure test. But can’t see a huge problem with using compressed air as long as the system is thoroughly vac’d afterward. Bang on mate.

[@scientist100]

What about the AC dryer people keep talking about going bad automatically with compressed air?

[@daveqlockard]

I was ready to take this system I just built to the shop and pay$$$! New compressor, condenser, accumulator, and orings all around. Yet, I couldn't maintain any vacuum. Your simple and straight forward approach - I found my leak. You are an obvious genius~! Thanks...

[@ScannerDanner]

Awesome man, that's what I'm talking about

[@kevinemesiobi6169]

Thanks, for the information given. You seem to be an all rounder, that's cool. Automobile diagnostics demystified.

[@a2z_farm]

Thanks for another good video scanner Danner this is the one I was looking for I never did make it to the other website thanks again be blessed you're the best

[@halleffect1]

"one rubber-tipped air nozzle coming up" for some reason i found that funny

[@haroldlm64]

Start my day off with some good diagnosis. Thanks.

[@criticaljim1]

Excellent video, thank you so much!

[@clearshadow213]

You have helped me the most with ac

[@audi_kid]

Thank you for this video ! Audi Technician very thankful 🤙🏼

[@annapaderewska5190]

Excellent video,that what ive learn working in Us for some time years ago using compressor instead of vacuum pump which is not cheap to buy for few jobs a year.Thanks mate .Greetings from UK.More videos like this :-)

[@garnellwalls3721]

Thanks Man for a great video.

[@homefront3162]

I always replace the TXV if I had a compressor failure... you nailed it

[@baxrok2.]

Nice job on this one. Nice camera work from Caleb too. Thanks guys!

[@ScannerDannerPremium]

Thank you!

[@ScannerDanner]

was there too much camera movement? Another guy said there was. Thanks!

[@baxrok2.]

Only once for a brief moment or two. This was his best work yet and he's getting better all the time! Well done!

[@ScannerDanner]

It was possibly an edit I couldn't make because I was talking at the same time. Cool, thank you!

[@Sandbag1300]

Proof that when you know what you are doing, it is easy. Great job! Really like your book. May have to subscribe to the premium channel again. Thumbs up video.

[@ScannerDanner]

Thanks so much! You will not be disappointed if you do

[@ganeshnarayan5505]

Hey Mr Danner thank you for this video.

[@yabasvlog3439]

Great work

[@bundylovess]

Nice one mr danner big thumbs up

[@brycethoreson9216]

Preparing for my A7. Going over your AC videos. Need to learn more on the diagnoses section

[@tinkerwest]

Compressed air to test ac system leaks is definitely going into my arsenal of diagnostic methods...Any nay-Sayers are apparently oblivious to the fact that once repaired, the system will undergo vacuum to remove air moisture before recharging...

[@ScannerDanner]

exactly, not to mention the system if full of atmospheric air already when there is an empty system from a leak.

[@tinkerwest]

BTW, I would recommend using something called Seek-a-Leak which is designed to find leaks on tires, similar to soapy water but better results...Works great for leak testing tires as well as any pressurized tank, hoses, fittings, etc...Also, would like to take this opportunity to thank you for your great book, one of my best investments and diagnostic tools ever!...

[@glasshalfempty1984]

But wait... I get if it's a leak and you're trying to find it. The filter drier is already gone as once the refrigerant leaks out, the air can and does come in. It won't hurt to use compressed air at all in this case. But what about leak/pressure testing on a newly repaired system? Wouldn't you want to avoid exposing the newly replaced filter drier to moisture and use nitrogen instead at that point?

[@randomsecrets]

ONLY if you want to change your dryer and expansion valve. ANY moisture added to the vacuum system instantly ruins an AC Dryer. NITROGEN - NOT SHOP AIR is a MUST or vacuum and use freon. He literally just ruined that cars AC system- sure, it will work in the short term, but never work correctly again until the dryer is replaced.

[@NiHaoMike64]

POE oil absorbs moisture that will not be removed just by pulling a vacuum, but I suppose that's not a problem if there was a big leak some time ago and all the oil has to be changed anyways...

[@waltp3373]

I can't believe I never thought of using compressed air and soapy water to find a A/C leak. Thanks for the video. I do remember the abominable snowman cartoon. When I got older, I realized they were doing a takeoff of Steinbeck's "Of Mice & Men" - George & Lenny.

[@rimmersbryggeri]

Thanks fro teaching safe and proper procedure. I have seen people use Nitrogen cylinders fort this diagnosis but that seems a little expensive in the long run.

[@janairbrake262]

Very good Scanner Danner......

[@peterjd.w794]

Interesting, thank you for video helpful. From Australia.

[@wontstopwinning316]

Very cool. Always learn something new with your videos. Thks

[@ScannerDannerPremium]

Thanks Jorge!

[@hiesterconst]

Great Video!!! Always very professional, thank you for sharing your knowledge with us Scanner Danner!!!!

[@ScannerDannerPremium]

Thank you Bob!

[@JSBautomotive]

Perfect video. Shop air is a great idea. No need to waste refrigerant and dye

[@SuperSecretSquirell]

To make adding or maintaining pressure easier, get yourself a high side quick connect and put an air fitting on it. That way you can run air to it all the time and not have to go back and add any if you bleed off.

[@joedarga8487]

Hello, I am trying to find a leak in my 1999 F230 super duty... can you tell me what fittings I need to buy to fill the AC system with air using guages..(that I will purchase too)

[@SuperSecretSquirell]

Go to an auto parts store and get a high side coupler and screw in an air fitting of your choice. The threads arent a perfect match but put some teflon tape on it and it will seal up just fine.

[@dubmob151]

Wonder if anyone actually makes an adapter for this purpose, or is it considered too "taboo" to sell, like an extension cord with two male ends- Strictly a DIY item I guess.

[@williamharris3707]

Great video. Your a good teacher explain in great detail. Thanks

[@ScannerDanner]

Thank you!

[@drivewaygarage1561]

Thanks for the video. I added 2 cans of refrigerant and 2 days later, no AC. Now I know how to find the leak.

[@rickl7024]

Have used soap and water on a lot of different systems on heavy truck repair,,, will def try this one!

[@rickl7024]

Update! Just did this on a international 4300 truck,,, found the problem in about 2 minutes,,, we get quite a few small leaks in the big truck World at our shop ,, thanks again for the info!

[@SP-mp9yi]

Thank You my brother I will use this information well ✌🏽

[@ozzstars_cars]

Always good info and gave me 15 mins 55 sec to drink a good IPA beer.

[@sampierson402]

blue moon here brother. happy 4th!

[@p8nflnt]

What’s a good IPA beer..? Impossible!

[@homefront3162]

Great idea to use car wash, I always used dish soap... great video Sir

[@rashidmatin2693]

Thank you dear teacher...!

[@oscaralarcon6695]

Great job

[@MrPowrwheel]

Thanks for quick reply. Will check the Orifice tube and dryer parts. Have not used air con as you suggested. Bob

[@steverayrapp]

I just used this method and had a heck of a time finding the leak, turns out BOTH service ports were leaking. I have two dryer filters on my air line so I wasn't worried about moisture. I Vacuumed the system down and it held! This was on a 2000 Tahoe. Thanks for the video!

[@dubmob151]

Did you just listen for the leaks there instead? Or just release the pressure from the gauges and check for pressure coming back up without opening the valves?

[@steverayrapp]

@@dubmob151 Soapy water in a spray bottle.

[@911insidejob911911]

For leak detection, use a borescope to see inside enclosed areas.

[@kd7cwg]

I had a compressor front shaft fail in my 86 mustang. That was fun to find! It held a vacuum all day long, but could not hold the refrigerant pressure.

[@ScannerDanner]

I have seen this too. Thanks!

[@alangku33]

Thanks for this video..it's really applicable to apply to my car..and your speaking is very clear..Thanks 👍from malaysia

[@ScannerDanner]

awesome!

[@heartbeat59]

That was a great video. Thanks for sharing.

[@ScannerDanner]

Thanks for watching!

[@flatrateus]

Save your trigger fingers (unless you're into body building) and try using a pump lawn sprayer (mine from HF). Works great for flat repairs too! The long tube gets into tight spaces as well. I fill it maybe once a month. After 45 years the hands get a little painful squeezing triggers.

[@ScannerDanner]

that's a good idea! I have two of those two. Thanks for the tip!

[@lenBrill1971]

Dude you are a good feller. And a great mechanic. I get a good vibe from you. Ignore the armchair mechanics. Out of respect for you I'm not going to curse here on your youtube comments section. But I have a better choice of names for these folks. Keep posting brother!!!

[@frankgriner2932]

Armchair mechanics are not the problem, bitter people are. There is nothing wrong with this method if the system is gone, no pressure. This video helps the average guy with an older vehicle who doesn't want to spend 1K+ at a shop to figure out what's wrong, even if that shop is worthy. Yes, Dan is a good guy, most of us aren't working on 50K SUV's and Trucks. If you have one please just take it to the shop.

[@lenBrill1971]

@@frankgriner2932 . . . .i won't "take it to the shop" I fix it

[@miltonscornertobylove5068]

Very very cool video, God bless you brother!

[@ScannerDanner]

Thanks Milton!

[@donaldcupo6336]

Just did this. Found leak at connection to compressor in five seconds. Changed orange and pulling a vacuum. Great way to look for leaks.

[@jordydereus]

nice vid man. watch all of your videos. best mechanic on youtube!

[@ScannerDanner]

Thanks bro

[@rosibelrodriguez2847]

Excellent👍.thank you.

[@mikerequa820]

Great video thanks for sharing

[@cutabove9046]

Just a thought. You might consider dye along with the compressed air and increase the pressure to 250 once equalized. That would find ALL the leaks without starting the system for more than five seconds.

[@danielmoore8538]

Good videos...you,pine hollow and SMA 👍🏻

[@idada459]

Great video thanks paul

[@ScannerDanner]

Thanks man

[@JoseRamirez-em7zp]

eres el major amigo

[@mostlymoparih5682]

Years ago I worked for IBM and I did an upgrade to a 3715 printer. The upgrade allowed the printer to print faster and an easier to install ribbon. To make the printer faster all you had to do was move a jumper. I took my time doing the upgrade because I felt bad for the customer because if they knew they could have done the upgrade on their own and not paid all that money for me to do it they might have been upset. My point being some of these guys don't like you coming along with a test light or some compressed air and using sound logic to figure out a problem. They want to come in with their bells and whistles and magic and behind a curtain like the Wizard of Oz fix the problem. Knowledge is power and you are helping people just like you help your neighbor when he needs it. You can relate to this. I fixed a Chevy Impala once that was having trouble getting it started. I told him it was his carb and he needed it rebuilt. He asked me if I could get it running so he could get home and his brother in law told me not to do it for free so I told him I'd get it running for 25 bucks he agreed. I went out and had him crank the engine while I tapped the carb to unstick the float and it started. He said 25 bucks was a lot of money for just tapping his carb so I told him okay 5 bucks to tap the carb and 20 bucks to know where to tap it. Great vid Brother. Your logic is sound and sometimes you have to read the directions or in this case listen as you qualify the condition of the AC system. GBWY

[@ScannerDanner]

nice! Loved that. And that is exactly it too. We get paid for knowing where to "tap" :-) Thanks man

[@dougn4942]

Great video thanks 👍👊

[@Anthony-di1cx]

Hey ScannerDanner, its anthony from the side of the road! :P me and my dad would like to say thanks again for helping us get home. Impressive channel btw!!

[@ScannerDannerPremium]

Thanks Anthony! Great to meet you and im glad i could help.

[@scottburgess6417]

Scannerdanner I just watched your video I thought it was great. I have a question, if you use compressed nitrogen instead of air to check the system for leaks would you still have to replace the dryer? Thanks

[@RC-Heli835]

I found a leak for the first time using shop air the other day. We run some type of filter on our shop air to keep oils and waters out of it so we can paint with it. The system had zero pressure and had not been used all winter. Turns out a sticky shrader valve was leaking on the low side. I vacummed it down for an hour and left it vacuumed down one week. Since outside temps sort of got crazy cool again the following week I needed heat in this dump truck and didn't miss the air. My hope was that the engine heat and vacuum would dry out the dryer. A week later It was still holding vacuum but I vacuumed it down again for an hour. I never changed the dryer which had been replaced the season before and it was blowing 41 degrees in the vents after weighing in the specified 3.5LBS of freon. I would have never tried shop air before seeing Scanner do it. I usually use Nitrogen and soapy water but tried the air and saved my Nitrogen for another day. If it didn't work I would have reclaimed the freon and got a new dryer for it. And if that didn't work I'd go back to 2-60 air condition. LOL!

[@MrMagsimus]

Excellent video no nonsense , he is perfectly right if the system has nothing in it pressuring with air is fine .. hell you could even piss in it and pressurise it to check for leaks , once leak located then yes you could use nitrogen for second test or add some gas to it to see what’s going on .... sometimes people just go over the top on this safety and that safety , I’m telling you as ex mechanic all you guys know fuck all happens without that big hammer and that pry bar sorts the stubborn ball joint and mad jobs , u can’t use a toffee hammer like the book says ..video was bang on for me makes sense 👍👍👍🇬🇧🇬🇧👌👌 thanks brother ✊

[@cutabove9046]

An old timer told me that kid's bubble liquid works very well for finding leaks. Ever since then I've mixed 50% bubble leak detector with kid's bubble liquid. Works extremely well for small leaks.

[@kkampy4052]

It contains glycerin, which helps keep the bubbles from breaking.

[@richardgonzalez8941]

You're videos are addicting, I am going through your videos I saw the one about KZbin shutting down your site and you are transferring all your videos. It is hard to follow the time line. Any way, you put alot off time and effort and it shows. I would not worry too much. People will follow if they want to learn. I know I will.

[@DriveShaftDrew]

good find

[@ScannerDanner]

thanks Drew!

[@omorin34]

Great Vid! Thanks. I'm finishing a Copart Mini and this helped. I never thought of just using a rubber nozzle to shoot air. Regarding the other comments, some people are funny. Amazing just how small nads can be on people. I'm guessing none of these guys are squirrel suit jumpers

[@Dr2009king]

Cool .. I also work on AC Systems .. you are a real Master.

[@Mahigeer1]

I feel closer to Mr. Danner now. We both have those red flashlights. Nice training video.

[@SilverDollarSaloon]

Good Job. I would replace the bad condenser and the dryer ,run a vacuum check and if it holds minus 30 psi for an hour.It is good to go for a recharge.