Hi, how do you like the idea and execution? Rate from 1 to 10
@jozsefszabolcsjakab16562 ай бұрын
11
@MildarValsik2 ай бұрын
Solid idea. Maybe a tweek or two it goes from 8.5 to 10.5
@RustamGani-pd9vv2 ай бұрын
10
@jamescohen85452 ай бұрын
10
@mtiger82 ай бұрын
More than 10 👍
@energyshotsАй бұрын
10/10 I watched the entire thing, no skipping forward because I had no idea what the heck it could possible be, it's brilliant!
@RPRosen-ki2fkАй бұрын
Imaginative solution to a problem. Well executed and it looks useful, I'll give it a solid 8/10.
@jimh22909 сағат бұрын
nice idea, what a great base, little heavy but nice
@meangreen73892 ай бұрын
You went from an idea to putting that idea into use. It’s the effort that counts and the result was pretty good. Rating: 9
@meangreen7389Ай бұрын
@@JeffreyRust-oq7rw - Naw, not complicated at all if a person can see the steps and the end result in his or her mind’s eye.
@michaelwilliams2151Ай бұрын
Mines similar to that, I mounted it on a 24" semi wheel. I love the idea of having wheel on it to roll around, will be adding it to mine. Defiantly a 10+
@paulnager5270Ай бұрын
That was alright man..! I had no idea where you were going, and I was entertained. I like watching folks work out solutions to problems. I'll give it a 10. Good content...💪
@aieeejo2 ай бұрын
I recommend heavier duty wheels - those skateboard/luggage wheels will only last for a few roll-arounds before they split. On the bright side, with this design, they will be easy to change as often as you want, and to whatever better alternative you decide on after the first set fails.
@doughaven-rf8idАй бұрын
Skip the wheels and use a dolly cart should you need to move it. It would be be more streamlined and seems like a lot of extra time for nothing.
@chillstarАй бұрын
@@doughaven-rf8id and how are you going to lift it onto the dolly without breaking your back? The solution in the video seems way better than using a dolly.
@doughaven-rf8idАй бұрын
@@chillstar Like a two wheeler dolly, the ones delivery people use to bring cases of soda into a store. WTF were you thinking ?
@chillstarАй бұрын
Well, here in England, a dolly is commonly a board with a castor on each corner. What I think you're describing is known as a hand truck or sack truck. But whatever you call it, how can needing to use something else possibly be better than having the ability to move it around built in?
@aieeejoАй бұрын
@@chillstar Not just in England, Chillstar. But I believe we're on the precipice of the terms being synonyms here in the US as so many people casually use them interchangeably (like sunroof/moonroof). Whenever my neighbor asks to borrow my dolly, I always bring over a dolly, even though I know he means my hand truck; yeah, I'm being pedantic, but he can end that pretty easily :-D
@shakaravaz44772 ай бұрын
Ну что тут скажешь? Идея отличная. Я сам уже лет 10 собираюсь соорудить подобное основание для уличного фонаря (чтобы его можно было по мере надобности перемещать). 10 из десяти. 😊 Да, и "балеринка" для вырезания отверстий фрезером у тебя прикольная. Возьму "на вооружение". Классный видос, спасибо! 😊❤
@joeseda8102Ай бұрын
GREAT idea! You have found a solution for me that I had been trying to solve for some time that helps me organize and use my equipment in my small shop. Thank you GREATLY!
@carloscarpinteyro33218 күн бұрын
You can't argue with success for a brilliant idea, very inspiring, hope that it will do the same for you, to come up with other brilliant ideas!
@johngarrod794325 күн бұрын
When you absolutely, positively HAVE to waste an entire day...
@ianinnes74316 күн бұрын
Totally agree with you
@sustainableliving8808 күн бұрын
It is sad that someone thinks this is clever enough to video and share 😢
@hallowelt26732 ай бұрын
I can't imagine what this will be. Nice surprise😊
@QAZ-OMENАй бұрын
Ive got about 10 old tires i need more ideas for, keep them coming
@SteveMacSticky2 ай бұрын
Very good idea and you repurposed old tires which helps to cushion the vibration and also your toes
@perrygershin3946Ай бұрын
The enjoyment was trying to figure out what it was you were making. I had no idea until the demonstration at the end. It was a very entertaining video.
@dee-jae998921 күн бұрын
I love that you made something so useful for your use. Excellent
@robertmanley75562 ай бұрын
Very nice idea !!! I love it !! Heavy yet... portable...versatile...very cost effective...and its a use for a old tire !! What's not to love!! Very good work !! 👍👍
@johnbranca6880Ай бұрын
Brilliant. I am going to build one for my vice. My current stand is not sturdy enough .
@licksnkicks1166Ай бұрын
10/10 lots of quality work went into this. I can tell by the way you work that your work ethic is superb! ❤
@josemendiola49576 күн бұрын
Excelente video 👌 gracias por compartir
@yvesmaurice-ln6sb12 күн бұрын
Tanks you,gratitude pour votre générosité authentique.❤❤❤❤
@JanetWilson-h5n22 күн бұрын
This video provided exactly what I needed!
@brianfogle2743Ай бұрын
I had 4 35 inch tires had to get rid of. I cut the side walls off and use them for around base of ornamental grass to keep them from spreading and to keep weeds from growing. Bury them under mulch.
@PatriciaDiMondАй бұрын
Great idea
@MrAllan92 ай бұрын
The tire impeded his standing close to the tool, a nice watch but it's a lot of work for a poor result. The videoing was great.
@Im-a-Fool2 ай бұрын
Great idea for mounting a harbor freight tire changer!
@enoz.j3506Ай бұрын
That wont work,i have changed many motorcycle tyres and the amount of force req is a lot, myn is mounted to my concrete floor,it doesnt move. prob ok for bycicle tyre changing.
@omarksАй бұрын
440lb base might be enough, I'll try it. might need to brace against something bigger for leverage when using
@andrewhkim2 ай бұрын
what happens if you get a flat and have to change out the tire?
@hand_craft2 ай бұрын
We'll just pump it up with cement mortar)
@donaldshimkus5392 ай бұрын
😂🤣🤣😂😄🥺🥲
@randomposts56422 ай бұрын
I was expecting to be disappointed, but I wasn’t! Great idea, and we’ll done! Congrats!
@calvinahrens6988Ай бұрын
My Dad had one of these 60+ years ago ,minus the mini wheels and concrete. Welded 3" pipe to steel wheel .added vise to top.Just lean over and wheel it around to where you want to be . Still using it minus the tire. It burned away from all the welding slag!
@meditatingfishАй бұрын
If it's too heavy, and I saw you working hard to get it moving, use a motorbike tyre. But yes. 10/10.
@jimthvac1002 ай бұрын
Good idea for some things. Other things it is really to wide like for the saw. One would have to stand farther away than ideal to operate it.
@magastuff6991Ай бұрын
could offset it in the concrete.
@karenheartoriginal3783Ай бұрын
What a great idea…my dad would have loved it, made it and used it a lot! (still miss him RIP) I’m wondering if larger wheels could be used by mounting them more towards the center of the tire?
@maverickherman2724Ай бұрын
I just got back whatching the channel KZbin made it where I could not see your stuff for a while I have made stuff for my shop from what I find on this channel
@MichaelSmith-hs5iuАй бұрын
Very Nice, If I was build one, my situation would require bigger wheels for taking the stand out into the rough yard. Oh, if only I had some concrete floors,...lol
@grahamoakes3991Ай бұрын
If I had the use for it in my garage, I’d definitely consider making one 👍🏻👍🏻🤔
@mcneill64Ай бұрын
10 for creativity, 10 for complexity, 10 for functionality. A few more iterations needed for practicality.
@Alvawelding2024 күн бұрын
I like it, great idea, thank you for sharing
@DIYmr.TАй бұрын
useful tool for me, i will definitely make this app in the near future
@MicaelB.AnderssonАй бұрын
First thing that comes in mind, when I see an old tire😅
@guycolerick7958Ай бұрын
That's hilarious!
@edalaniz64312 ай бұрын
Geez, that's alot of work just for that !!!!
@kevinpounderАй бұрын
A need for every household, 😅thank god for fast forward
@beaverworks19692 ай бұрын
Hi, thank you for doing a great job! I liked this tire idea. I will take note of some points)
@hand_craft2 ай бұрын
Thank you, it's nice to be useful)
@victorriceroni84552 ай бұрын
That is quite clever. I would be inclined to use a 2" receiver tube to make switching tools quick.
@JohnRatliff-c1pАй бұрын
I just put a very heavy piece of metal underneath my vice and put locking wheels on it must be a way to get rid of old tires
@johnt787Ай бұрын
Genius!!!
@JörgRück-l2y3 күн бұрын
Respekt It's a good Man n❤❤😊😊
@theodorepettinicchi764Ай бұрын
Excellent idea with great execution. Needed to put flat washers on either side of the plastic wheels. Otherwise the steel next to them will chew them up. 9/10.
@hartleyhubbard3827Ай бұрын
excellent job! Hartley [garden grove, CA usa]
@harishwala5882Ай бұрын
Good workshop 😊
@rneal63Ай бұрын
I like the idea and the build, but I wish you would put some video of the finished product at the start. That way people can see if it's something they want and then see how it's made. Just a suggestion, I know I've avoided many videos because I don't know what the finished product is supposed to be. This looks handy for getting out your shop tools and storing them out of the way. I just think more people might watch if they knew what it was from the start.
@chrisholt2474Ай бұрын
Yep I like this idea. 🍻👍👍
@goldsbywashington350923 күн бұрын
Would make a good boat anchor.
@dorothywigginton1135Ай бұрын
..So smart!....really enjoyed watching!
@tonydewey3023Ай бұрын
I like that muchly, might fit bigger wheels though
@8th_Decade_Adventures20 күн бұрын
Please describe the brands & models of the tools you used. Thanks. Sam
@agioklimaАй бұрын
Dude i love it!!!!!!! Thank you so much for sharing this ...and it is so beautiful to create something from your mind❤❤❤❤❤😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
@carloscebrerotamayo389314 күн бұрын
Excelente idea ...pilar de soporte para herramientas de trabajo...a quien se le IVA a ocurrir ?? El que sabe !! sabe !! el otro que este al lado aprende. De mi país Chile gracias....PD : cómo se dice en nuestro país ....la cabeza la tenemos para pensar y no para criar piojos.. gracias gracias
@nbmooseloversАй бұрын
'Awesome'! 👍
@sophieb866622 күн бұрын
So smart
@WebbedQuacking2 ай бұрын
I could have used that tire on my Cayenne, CTTS lol! Hard to find out here where I live! 🤣
@bltoth1955Күн бұрын
Clamp a 2 foot round bar in the vice and use it for a handle to tow it around.
@fuevarde2 ай бұрын
Soy el único que piensa que esa llanta todavía aguanta sus buenos kilómetros; todavía está buena antes de ser considerada vieja y darle una nueva vida?... 😅
@hand_craft2 ай бұрын
Hi, this tire was on my car. Outwardly, it does not seem to be bad yet, but while driving it hummed a lot and there was vibration on the body) You saw her further fate in this video!
@fuevarde2 ай бұрын
Aquí en Costa Rica las carreteras están tan deterioradas que esos defectos de las llantas ni se notan; se cambian porque ya están muy desgastadas y no van a pasar la inspección vehicular, ahí ya se usan para construir muros de retención o muchas otras aplicaciones similares!... 🤭
@FranklinTaylor-lr4uj20 күн бұрын
5 out of 10
@MohammedGarmaneАй бұрын
فكره حلوه والي احى هي المعدات الي عندك ..تحياتي لك ..من اليمن
@mervynjones369421 күн бұрын
“Ain’t nobody got time fer dat!!!”
@Abrak_KenАй бұрын
Nice job, please help us by labelling all the things used for next videos
@jimmyredfern2432 ай бұрын
Obviously, not directed by Alfred Hitchcock.
@VictoriaMitchell-ix4urАй бұрын
Wow great job., 👏👍
@kathiehacht9156Ай бұрын
Question? Do you really need the weight for working? It seems to be a lot of overkill. Perhaps adding some pearl lite to counter act all that weight. I get the height think just not all the struggling weight. Good reuse of the tire though. Thank you.
@rolandmix9578Ай бұрын
Gute Idee bestimmt auch für die großen Sonnenschirmständer und umkippen erden die bestimmt auch nicht Noch etwas Color und es ist ein Schmucstück im Garten Ich würde noch einen Tisch mit Loch einbauen ald Getränketisch
@aelbiАй бұрын
Also ein Sonnenschirmständer mit Schraubzwinge dran😂
@rolandmix9578Ай бұрын
@@aelbi ja und Bierfass
@Darell-v6yАй бұрын
Purty dam awesome
@francoisconjard50742 ай бұрын
Bonjour Superbe réalisation cdt
@patwaldrip37742 ай бұрын
Excellent idea, thank you for sharing it.
@BobHolster-om8rf2 ай бұрын
SORRY NO SALE AND THE WHEELS ARE TOO SMALL. IT WOULD HAVE BEEN BETTER IF YOU USED IT FOR A PUNCHING BAG-TYPE ITEM.
@lindaspann9663Ай бұрын
Love your ideal
@davidbertrand68842 ай бұрын
I’m 74 and would never be able to move it after building it. 8/26/2024. 🇺🇸👍🏻
Good idea but an over kill, could have used a much smaller tire for that, cement is very heavy
@jeanetta9830Ай бұрын
Like wow
@WHLS-lz3wk2 ай бұрын
Same kind of tires my police department uses... and we have a stack of 'oldies and burn outs" out back.... I think I am going to do my part for The Environment !!! 10 10 10 10 10
@juliocrespo15442 ай бұрын
Definitely 10!!, portability is an added plus 10
@josephmccord4511Ай бұрын
The tire base seems too big a diameter, can u stand close enough? If your leaning in to use it your back will know it after a bit
@tobylou8Ай бұрын
440 lbs?? Nah, that's not really portable to most folks and you had to work pretty good to control it. Cool idea as a one of a kind item. 6/10
@doughaven-rf8idАй бұрын
Place the tire to the outer edge of the sheet to save some of the wood.
@dannymcdaniel16522 ай бұрын
Ok I'll give you a 10 cool idea
@SanteGuzzoАй бұрын
Per la serie....... " Quando uno non ha un tubo da fare" 😂😂😂😂😂
@enveragincic9288Ай бұрын
Super ideka
@jgviajante8752 ай бұрын
Genial idéia .
@ROBERTjones-yb8lvАй бұрын
That's nice
@jonwatkins675Ай бұрын
A 10!
@shirleymae30Ай бұрын
Waste of time, just use a tire and rim, and if you need it heavier then add water into the tire. Also, it does not need the tiny skateboard wheels, to be rolled where you want it.