Рет қаралды 196
This video features the renovation of an old chipping hammer conversion. The original purpose of the hammer was not clear, but it was repurposed as a chipping hammer. The original conversion was done with a grinder, but to be effective the point or pick end needed to be longer and more pointed. The hammer also needed a better handle. The video shows the machining of a new pick end for the hammer, the setting up and machining of the head to enable the pick to be accurately welded in place and finally the heat treatment.
Major equipment used in this video: Renegade Industrial 200 Amp Inverter Arc Welder , Hafco AL336 Lathe, Hafco HM45 Bench Mill,
Disclaimer.
This video is intended for generating ideas or entertainment purposes only. Should you choose to make or do anything as depicted on this channel you do so at your own risk. Making and the use of tools can be extremely dangerous. The equipment and methods I use may not work for you and by no means do I suggest that my methods of working are correct. Your shop safety is your responsibility, so I therefore accept NO responsibility or liability for any injuries or accidents you may have if you attempt to replicate the things that I do.
#whitedoggarage #chippinghammer #machining