A1-Security Ford 8-Cut Ignition Removal Kit Demo

Good tool. Worth the investment.

[@segounlocks5029]

Crazy because of everyone's impossible stories in the comments. I was able to read this guys responses and learn a lot. Thank you. Keyword Here is Sidebar Ignition!!

[@JarethGarza]

🤷🏽‍♂️ back in my day, all ford iggies were sidebar. Now these new guys jump in to the frey with their war-stories and have no idea of the struggles we had. I once had a F150 where every door was different and nothing matched the column. The iggy was even pulled and swapped at one point so NASTF wasnt even an option 🤷🏽‍♂️

[@segounlocks5029]

@@JarethGarza So I just got into this 8 months ago. I'm dealing with a 98 ranger that after using a lishi on. I found out the ignition had been replaced. So I'm trying to collect information. But now I know what to do thank you.

[@fatmahslemani4572]

Where can I buy from?

[@segounlocks5029]

@@fatmahslemani4572 got a bunch of different types on uhs

[@fatmahslemani4572]

Is there an Amazon store?

[@lisashelly6638]

I have the destroyer kit I bought back in 2002 - nice video spot on. I’m actually doing my own this next week - I’m a locksmith

[@johnbryant2457]

I was able to pick the ford e450 ignition without any tool. I applied tension to the plastic outline that you pulled out in this video and used a pick. Took around 15 minutes, but succeeded

[@JarethGarza]

Thats because yours didnt have a sidebar and mine did.

[@randyaivaz3356]

Personally, I would try to Use the picks to turn to On, then Remove, as opposed to jumping right at Removing the Face and Drilling. Meathod you show, appears to have 100% Success.

[@JarethGarza]

Personally I only used this tool to show how it works. Personally, this method is a waste of time :)

[@JarethGarza]

And good luck on ur method. I can tell ur a rookie. Sidebar locks vs picks? That would be like gambling. I prefer guaranteed routes to success. This videoed method and urs, I would never use in the field.

[@segounlocks5029]

Bro your not turning this over with no tension on the sidebar. And if you did it was pure luck.

[@tomking3942]

I did an old f150 last week no keys the ignition had been changed. I copied his door key popped the ears off. Put that four key in and turned it on with a channel lock pliers. Total time for removal 2 minutes maybe.

[@JarethGarza]

Cool beans. If u read up on the comments, youll see I only tested and tried this tool. I never kept it. 👍

[@josephneece17]

You can pick and remove those without drilling, maybe I should post a video.

[@JarethGarza]

Do it. Because these have sidebars and u have to tension them, some how. Perhaps you'll tell me that u use vice grips?

[@josephneece17]

I use a sharp flat chisel to remove that bottom tab that no one or anyone will ever see again. Then I slide an old pick u see and through to tension said side bar and use a pick key. Leave no more damage than the drill way. I wasn't trying to offend you. Just trying to keep the $$ in the locksmiths pocket.

[@safeshowroom]

@@josephneece17 I would like to see a video of that please.

[@lovanalexanderberenyi7950]

YES POST A _ VIDEO

[@adammorales5818]

Did you ever post a video of that… I can’t find this tool kit anywhere

[@truckertwotimes7189]

very well illustrated, thank you! 🙂

[@pouncerminned863]

i ended up having to replace a 2001 ford f350 ignition yesterday because someone stole customers truck, they found it with the locks broken- the ignition could not fit anything into it, i didn't drill tho- didnt know i could..i just took a flat head screw driver and some vise grips and turned it really hard to ACC then pushed a pick into the release underneath and it popped out and snew ignition in. Easier than drilling in my opinion--lol i hate drilling

[@JarethGarza]

I hate drilling also. This video was made for fun.

[@segounlocks5029]

@@JarethGarza the only part he forgot is the ignition was destroyed. Brute-force always works.

[@AbdiPianoChannel]

I want to know. How do i get this kit?

[@danielf1016]

Where I can get those tools

[@joewright7091]

What's the name of that kit we lost our keys. And can't turn to start obviously so don't know what to do any ideas?

[@2815Juan]

Call a local locksmith. These kind of tools aren’t usually sold to non locksmiths or tradesman

[@segounlocks5029]

@@2815Juan wrong

[@principedaschaves4]

👏🏼👏🏼

[@roheedpopalzai6848]

Is this kit discontinued because I cannot find it anywhere if you have a website can you tell me please thanks

[@JarethGarza]

Whole company went under. You don't need this tool anyways

[@roheedpopalzai6848]

@@JarethGarza I have a really hard time drilling out for the ignition locks to pull them out and I’m looking for tool where I can pull the ignition out without drilling it do you know anything thanks 🙏

[@gregorypierce6703]

Where can a kit be purchased and how much

[@marcilenerodrigues001]

Gostei da fazia vou copiar

[@dtnel]

Just impression or read it with a lishi or pick with a lishi then read it as two different lishi tools, reader and pick/reader….

[@JarethGarza]

Duuuuurrr old ford are sidebar equipped duuuuurrrrr

[@JarethGarza]

Let me elaborate since youre clearly speaking without an understanding: Side bar ignition wafers are all the same size. Its the cut out on the side of the wafers, that dictate their depth heights. So, sight-reading is immediately out of the picture (pun intended) Also, since its a side bar, it cant be tensioned via … wait for it, TENSION. SO A LISHI IS OUT OF THE PICTURE. Tank you come again.

[@dtnel]

Also the ignition lock had been replaced. Door & ignition were separate bitting.

[@segounlocks5029]

@@dtnel I think you misses the above comment. It has good information on why what your saying is not possible.

[@kennyt8730]

Yeah, but did it start the engine. Ford's security system has a chip in the key

[@JarethGarza]

Was that the point of this video? Nooooooooooooooooooooooooooooooooooo. If you want to see programming, thats another videoooooooooooooooooooooo

[@kennyt8730]

@@JarethGarza that's ok, I'll pass

[@barajasautodiagnostico9925]

hi bro, were buy this tool kit

[@JarethGarza]

No longer made

[@ronniekotler9265]

To good of video and information, not to have someone help with holding the camera!

[@keithhaynie7950]

Since when does Ford put a code on the ignition?

[@JarethGarza]

Never. This was an inside joke, years ago.

[@yrulooknatme]

hi I have an old 89 ford e250... its a beater but it's all I got.. I lost the keys on a bicycle ride the other day... ford says they won't help me... they can only access key codes back 10 years which is total BS! ... That tool have there looks like a life saver to me at this time?? could you tell me the price and where to get it .. or if it would even work on my vehicle? thanks

[@JarethGarza]

Ford isn't feeding you bs. Call s locksmith local to you.

[@yrulooknatme]

@@JarethGarza no it's pretty much bs... 5 years ago a dealer cut me a key off the vin#...

[@lockeyestlocksmith2349]

89 Ford F150 has a 10 cut key system, this truck has the eight cut System. Arrow Lock makes a tryout key system to generate a key from scratch

[@evansotieno7940]

Where can I buy this kit?

[@JarethGarza]

A1 security is out of business.

[@safeshowroom]

After turning the lock can't you read the cut depths with a Lishi tool?

[@JarethGarza]

No. Wafers bind into side bar and are measured differently than non side bar locks

[@lockeyestlocksmith2349]

AA Locksmiths and there’s a cut system you have two different types of locks the huf. Locks. And non-huf locks, Strat tech I think,

[@lisashelly6638]

What good does it do to decide the lock if it’s not working ? Makes no sense. This is for a none working key and it dosnt destroy the lock -

[@mattnorton9333]

cast the cap and sell it.

[@JarethGarza]

The cap is easily made. The cap puller is little more than a modified wiper arm puller.

[@shoelessb4515]

Duh! Try it again with someone else holding the camera

[@JarethGarza]

Your mom was unavailable at time of filming.

[@mcdlol6]

Jareth Garza 🤣