Vevor Trolly Jack vs Sealey Rocket Lift They Look Identical! Are They? Amazon Trolly Jacks

Who Are Vevor? Is The Jack Any Good? How will it compare to the Sealey Rocket Lift?
Lets have a close look at both these jacks.
Link to the Vevor Jack on amazon £139 amzn.to/3Zp9Tdb
Link to the Vevor Jack on their website £189 s.vevor.com/bfP9xZ
Link to the Sealey Rocket Lift on amazon £159 amzn.to/3JjEqUd
Link to the Sealey Rocket Lift Unboxing Video • Sealey Trolly Jack 200...
#sealey #tools #snapon #vevor

[@toyotoe3732]

I recently bought the vevor 2.5 ton trolley jack. I'm very happy with it. Thanks for doing the review.

[@aaanton11]

Its a cracking bit of kit, Thanks for the great comments👍🏻👍🏻🛠

[@toyotoe3732]

Hi Ant . Thanks for another great video. At 17.10 minutes into video you are lifting city bug with both jacks. I noted the 2 jacks are not at right angles to the car when lifting. They appear to be pointing towards the opposite front wheels. I only have 1 trolley jack, but I always lift at right angles to the side of the car. Interesting how lift when using 2 trolley jacks. Does it matter?

[@aaanton11]

As long as the jacks can move towards each other no issues, pointing towards each other is best, but if working on front wheels I angle slightly to allow more working room, also if the front doors meed to be opened angle differently again. another point is how level is the ground, angle the jack so it wont roll down hill, Thanks for the great comments👍🏻👍🏻🛠

[@philipbunker146]

I’ve got a Vevor pcp air compressor (for airguns) and it’s pretty much identical to some other “branded” compressors I’ve seen advertised! As you say, Chinesium manufacturers do copy most things! Oh and careful with that bung on the Sealy… I’ve got a similar jack with a rubber bung and they seem to leak once removed and put back!

[@aaanton11]

Oh No !! I pulled the bung, I will keep an eye on that Thanks for the heads up, & Thanks for the great comments👍🏻👍🏻🛠

[@DynamiteDaveLlewellyn]

Looks to me like they are made in same factory with slightly differing product specs where i work we make stuff shal we say for many different customers and every recipe is slightly different to. So probably side by side production lines or poss. set runs of say 100 Sealey 100 vevor 100 100 Halfords Etc. but all will be much of a muchness as you have found out and all will share some parts to save costs.

[@aaanton11]

Thanks for the great information👍🏻👍🏻🛠

[@davidholmes6047]

Great video - when lifting the volvo / BMW was it on the chassis box section. Thanks

[@aaanton11]

They have plastic jacking points on all four corners and one in the middle of the subframe at the front, Thanks for the great comments👍🏻👍🏻🛠

[@ThomasNappo]

Well done

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@iuliandenisov3743]

After watching this video I have purchased the Vevor one. During the first use , lifting the back of my Passat , the jack failed. I found few broken bits on the floor put them back in the box and send the hole bit to the seller.

[@aaanton11]

What bit broke? do you have a photo I would love to see it, Thanks for the great comments👍🏻👍🏻🛠

[@iuliandenisov3743]

@@aaanton11 one of the safety rings snapped. Where can I upload the photo?

[@toyotoe3732]

What size axle stands to buy to get really good clearance from the ground, if for example doing a clutch and the get the gearbox out easily (using the featured jacks)? Cheers.

[@aaanton11]

These sealey ones are nice and strong, amzn.to/41gaNZQ Thanks for the great comments👍🏻👍🏻🛠

[@xUKzIVIoNsTeRx]

Can’t decide between the Sealey 2001 or the Sealey 2500 any recommendations? Both are basically same price. 2500 has a 3 year warranty we’re the 2001 has a 1 year warranty

[@aaanton11]

I like the 2001 better the lift is higher, Thanks for the great comments👍🏻👍🏻🛠

[@jacksongil9123]

How heavy is that 3 ton jack?

[@aaanton11]

Very Heavy, its a beast, Thanks for the great comments👍🏻👍🏻🛠

[@jcoul1sc]

Understand China is hyper competitive, would think the sealey is chinese made and the vevor is made in indonesia and assembled in china

[@aaanton11]

Thanks for the great information👍🏻👍🏻🛠

[@jcoul1sc]

Prob made to an original design thats 50 years old

[@aaanton11]

Yes you might be right Thanks for the great comments👍🏻👍🏻🛠

[@westfieldracer]

Would NEVER waste money on another leaky Sealey low entry jack that doesn't hold pressure from new now matter how much new oil & bleeding is tried, awful products 😮

[@aaanton11]

Did they replace it under warranty? Thanks for the great comments👍🏻👍🏻🛠

[@nikokristiansbodnieks2147]

better sealey, quality in welding, i wouldnt risk my life in that shit welding and better 4ton jack

[@aaanton11]

Thanks for the great information👍🏻👍🏻🛠

[@nikokristiansbodnieks2147]

@@aaanton11 And how vevor cylinder? Leaking or not?

[@PedroPlckle]

Sealey doesn't look like a deathtrap like the Vevor. If you want to do the same job but increase the risk of a failure then buy the cheap Vevor. Tiny circlips versus 24mm bolts for the front wheels? No contest. Laughable chinese crap.

[@aaanton11]

The Vevor is put together well, I have had no issues Thanks for the great comments👍🏻👍🏻🛠