Restoration of Antique Rusty Kerosene Oil Table Fan | 100 Years Old Fan

Restoration of Antique Rusty Kerosene Oil Table Fan | 100 Years Old Fan
Restoration Video Overview:
In this video, we are restoring a very old fan. We found it in a junk store and brought it to our restoration room.
It was full of rust and mud, and the engine inside was completely stuck due to the rust. We decided to restore it and separated all its parts. Its internal mechanism was badly damaged by rust, but we cleaned it thoroughly and removed the rust completely. The engine was also restored to like-new condition. After completing the restoration of the rusty fan, we tested it, and it is working perfectly.
Watch the video till the end and subscribe for more restoration videos like this.
If you have any questions about this restoration video or other restoration tips, you can ask us by commenting below. We will contact you and guide you completely.
Thanks for watching!
#restoration #restorationvideo #antique

[@markm5908]

Wow. Caked in mud, blades still straight, bearings still packed with grease and no rust in the piston. What are the odds? Zero!

[@aahands]

😇

[@valeriomancuso6427]

I thought exactly the same. The initial condition is staged. Where did he find it? Under a tree? Please. And not even a tiny hole because of the rust?

[@Paul-fd3qb]

You are exactly right... Look at their last 5 video's - all the same mud with little to no rust pitting....

[@christopherlinger1554]

Also I’m pretty sure that there wasn’t Phillips head screws 100 years ago

[@Maricruz-d6l]

whats wrong with it?

[@ajizselam9116]

Fake restoration

[@aahands]

😇

[@JerrySpann-fn4kw]

You know damned well that its fake​@@aahands

[@MrTabs4]

yes it is fake and there is more he hase two more wideos with same fan one is from 3 months ago another is from 6 months ago almoste all videos on this channel are posted two or three times with exaactly same devices and almost same titles

[@ΝίκολαςΜουχίττιν]

Fake or no l watch and you get out

[@JerrySpann-fn4kw]

@@ΝίκολαςΜουχίττιν Gladly! I will not support a fraudulent POS.

[@merceariapinheiro8878]

Fake

[@aahands]

😇

[@ОлегХинко]

​@@aahandsWhy are you lying, man? Do you want more views?

[@AdolfZachrisson]

@@aahands please stop

[@jaytalbot1146]

But they got you to comment! All hail the algorithm!

[@Thematt11]

These fake restoration channels really are hitting a new low level of effort.

[@AdventurerSurjadoy]

I think it was degraded forcefully before restoration

[@aahands]

😇

[@curtispederson9390]

Why??

[@imperialpresence1173]

thats called presentation...he still restored an unusual item and that in itself is pretty cool...

[@jucieljunior]

​@@imperialpresence1173 Ele não restaurou. Ele limpou a sujeira que ele mesmo fez.

[@vanpenguin22]

That layer of silt did a magnificent job of preserving the metal. A couple squirts of penetrating oil and that set screw practically backed itself out.

[@johannapottie1553]

No offense but there is more mud than rust, a little water would have cleaned it up rather well

[@aahands]

😇

[@mistergsa1]

Just don't put the mud on in the first place. You can even see the smear marks of myd on the blades.

[@chrismayer3919]

All he had to do was slather it in mud then leave it to dry for a few days; VIOLA- instant antiquing

[@restaurart1978]

The piece is well preserved, but it was subjected to mud to make it appear deteriorated, it must certainly have been purposely stuck in the mud of the lagoon.

[@JohnLove-q3j]

Fakethat old with mud wood have much more pitting

[@tukaramkamble3193]

मैं कभी ऐसे विडिओज देखता नही।लेकिन आज सौ साल पुराना सडा हुआ पंखा देखा और आपने जिस लगन से और कौशल से उस पंखे को नया कर के उसको इस्तेमाल में लाया,आपकी लगन और हार्ड वर्क काबिले तारीफ है।❤

[@olgatit1888]

Ппосто обалдеть! Даже не представляла себе,что существуют такие аппараты. Раритет! ❤

[@aahands]

😇❤️

[@Foxkord44]

А тебя не смутили шурупы под крестовую отвертку, которые еще и открутились на изи)) В те времена их еще не существовало, это фейковая реставрация

[@olgatit1888]

@@Foxkord44 и что? Аппарат старинный, видно же. А крестовые шурупы значит позже меняли. И да, ты уверен, что я твоя ровесница, что тыка ешь тут? Если что у меня уже давно внук

[@RCPlanesAndTravels]

@@olgatit1888 это видно по вашей деменции. Бабуль, это интернет, тут могут и на хуй послать.

[@RCPlanesAndTravels]

@@olgatit1888 это видно по твоей деменции. Бабуль, это интернет, тут могут и на х*й послать.

[@pipapaquigrafos]

Hello, I believe that calling this work "restoration" is a bit of a stretch. I think more could be done. A warning should be given to anyone who publishes these types of videos, not everything counts to gain "views". I hope that's not the case.

[@chrisnemec5644]

This is about as honest as an American politician.

[@aahands]

😅

[@delmarleite4041]

There are no more "honest" Brazilian politicians

[@chrisnemec5644]

@@delmarleite4041 Are there honest politicians anywhere?

[@vanpenguin22]

It's a Sterling engine! That is soooo cool. I like that shade of green too.

[@johanntiu4162]

Sterling engine-powered appliances were much more common before electric motors became widespread.

[@CarlitofransemBarbosaBarbo-o6d]

É a primeira vez que vejo um ventilador desse modelo muinto bom seu trabalho eu amo as coisa mais antigas são mais resistente ❤

[@aahands]

Thanks 😊

[@mahendrap1960]

Best fan for those who don't pay electricity bills lol

[@aahands]

👍😅

[@MuhammadAzam-xs9bv]

Super nice out Claas antique fan 👍

[@aahands]

Thanks 😊

[@himanshunavani6922]

Badi tagri mahanat ke baad bada tagra or bariya response...pankha bariya or shandaar ho gaya... 100 saal purana hoga kam se kam ...Jaan AA gayi pankha m... Show ke or kabhi kabhi use Lena ke liye unike chize. ...ruf and tuf .. struggling.. full dismantle the fan ..

[@serafimpinho7532]

Excellent Maquilhage. In my Contry remove rust is so hard. I like de object for is something inocnue.

[@aahands]

Oh wow!

[@adrianclehmann]

The correct name for this type of fan is an Erickson Cycle or Stirling Hot Air Engine. A flame heats the displacement piston that transfers the hot expanded air into the power piston, thus repeating in a closed engine. I have a fan of this same design and it is a reproduction of a 19th century KYCO fan style made in England. I ordered mine new from Pakistan in the 1980s and its also blue in colour. It cost $600 Australian. I doubt they cost much more now. This fan looks as though it has been in a flood. Probably not as old as you think but the design is old. They pre-date steam engine technology and were never seen as a real power source but were useful for areas with no electricity. NASA developed a similar engine that used compressed hydrogen internally instead of air. That engine was solar powered and developed several thousand horse power. It was mounted at the focal point of a sun tracking solar dish and ran an electricity generator. Nasa even had one running a car. All experimental though. Lots of info available online. A ship was even built running the same type of engine and it wasn't successful. It was powered by coal. The engines were very large and required a lot of coal. In the end there was no room left for any cargo so the engines were replaced with steam engines that produced much more power. Great to see one being cleaned up and saved from the scrap heap. Great effort. A unique part of the pre steam era of the industrial revolution. www.reddit.com/r/WeirdWheels/comments/p22t61/1979_doe_nasa_amc_spirit_dl_with_a_stirling_engine/?rdt=65469 www.stirlingengine.com/forums/viewtopic.php?t=553

[@robertmyers5993]

My OCD wouldn't let me finish this video, my eye started twitching when you A) didn't use a any water or detergent to clean off the dirt. & B) The brass bell brush an your angle grinder... Nope. Anywho glad you "restored" it to your satisfaction, hope you enjoy it.

[@jamesroberts2115]

That rust doesn't look like the rust I know. More like red mud dried to red dirt.

[@mistergsa1]

You can even see the smear marks of the mud on the blades If you try and fool us - you failed. Not watching any of your videos again,

[@aahands]

Try to watch our next upcoming vides they would be better and improved 😇

[@Thematt11]

@@aahands You could improve them by not faking them.

[@jjj68rrr]

Керосин. Представляю как этот вентилятор вонял

[@georgebrown8312]

I have never seen a fan like that before, and it runs on kerosene oil. Anyway, you did a beautiful job of restoring that kerosene oil fan. It looks much better and it works like a charm too. Excellent work I must say.

[@theexchipmunk]

It`s one of the few use cases of a sterling engine I have seen that is not a emergency generator that can run on anything that burns or super specialised use cases like powering a small military submarine. Pretty smart to use that for this device.

[@aahands]

Thank you very much!

[@aahands]

😇

[@armandoarturorosabalsanche7173]

Uff,well done my friend, from, Bayamo, Cuba, god bless your hand

[@christophe8818]

Bonjour, merci pour cette vidéo. J'adore !👍

[@ivoolazabal7323]

¡¡¡ Magnífico!!!. Saludos desde Uruguay.

[@торнадосорхота]

Плохо намазал глину надо было побольше комками наложить 😂

[@aahands]

😇

[@superintendenciaprotecaoba3856]

Nem sabia que existia ventilador de querosene, interessante! A restauração ficou boa!

[@aahands]

Thanks 😊

[@Creative.Inventor]

Your videos always inspire me to live my best life. Thank you for this content!😉

[@aahands]

You are so welcome!

[@NELLYSCHASE]

Amazing transformation! Great job on this!

[@aahands]

Thank you so much!

[@jorgealvarado299]

Excelente trabajo

[@gregb76]

Wow, ice job. I have never seen a fan like this, and I am 67.

[@aahands]

😇

[@josecepeda1463]

Está padrísimo el abanico y de gas genial verdad 👍👍👍👍👍

[@aahands]

Right

[@dipakdas6887]

I need I live rent room Assam Guwahati India Single fan i used monthly electric bill is 350/-

[@aahands]

❤️

[@Chucthihien]

very good video

[@aahands]

Thanks

[@JulioCochrane-lq1po]

Nice job buddy

[@aahands]

😇❤️

[@evgenijkern]

❤🎉😊

[@samratashok4504]

Great thinking Very nice 👌👌👌👌

[@aarondwyer3746]

Beautiful job on restoration

[@aahands]

Thank you very much!

[@donsmith7722]

It's a beautiful restoration, but you go much too slow doing it.

[@aahands]

😇

[@mred8002]

Just increase the playback speed if it troubles you.

[@tetovanej374]

good job

[@aahands]

Thanks

[@ΝίκολαςΜουχίττιν]

Real restoration

[@aahands]

😇

[@ThomasWinders]

Never seen a kerosene fan. Is It working with a Stirling engine? By the way, green and black painting Is quite a punch in the eye 😬

[@christokaloudis2050]

Better than the crap we have today well done

[@franciscosilva8155]

Como é que isso funciona? Sem eletricidade, sem vapor... é mágica?

[@aahands]

It’s work with kerosene oil

[@stevedoolanTacoma]

It looks like the fan was caked in mud and then baked at a low temperature. It may have been given to him like that. Overall, I would give this video a 2 out of five. Sorry for the crappy comment. 😎

[@markkeith9055]

I wonder in a hundred years if someone restores the same fan.

[@KeithLyons-z4h]

So this old fan works similar to a stirling engine?

[@ВладимирПешков-э3р]

Сто лет срали голуби?

[@SWZTV]

Amazing Stuff

[@gilbertoabadio3147]

Valeu a transformação

[@aahands]

😇👍

[@garyv2196]

Ah, I just love the smell of lead paint.

[@shanepowers7566]

Good job! Water’s free.

[@АндрейХарченко-щ9х]

Incredibile

[@aahands]

Thanks

[@BashirAhmedQumbarani]

So beautiful Restoration amazing👍

[@aahands]

Thank you! Cheers!

[@حسنفاضل-ش4ش]

جميل جدا جدا وعاشت اليدي ❤

[@aahands]

Thanks for your appreciation 😇

[@AdventurerSurjadoy]

Need 5x fast-forward

[@botter097]

Rất hay, tuyệt vời.

[@aahands]

🥰😍

[@rob13854]

A shame that you can’t do a real restoration without having to fake the condition of the object before you even start. Mud is not rust and you probably spent more time covering the fan surface with mud than you did with the so called restoration!

[@jaimemontaner3801]

I don’t think this is fake. The fan may have been made to look worst than it actually was but it was still a beautiful restoration.

[@aahands]

Thanks for your appreciation 😇

[@adiltaj-d2m]

Amazaing bro

[@aahands]

😇

[@Superbob396]

Nostalgia

[@aahands]

😃

[@سلمانكيّوش]

رائع... أهنئك..

[@aahands]

Thanks 😊

[@ganikudul674]

Amazing bro👍👍👍👍👍😁

[@Алик-Звездунов]

Amazing restoration😊👍🏻

[@aahands]

Thanks buddy 🥰

[@BennyCFD]

Hmmmmm.........Lots of dried dirt and not enough rust or rust pitting.

[@aahands]

😇

[@JoseManuel-vm7zd]

Green💚💚

[@KoT_B_MyKe_1030]

Клоуны которые пишут fake поплачте в подушку 🤡 и вот вас скелетик💀

[@JLCra87]

It would be awesome to see you restore these awesome historical things without trashing them first. It's not necessary man, it's really not. People will still watch. Promise you.

[@Pdor_figlio_di_Kmer]

Where did you find that fan? In Pompei? Either that or in the aftermath of a Lahar.

[@eduardoz51ear]

Conocía heladeras y lavarropas a Kerosene, pero no ventiladores. Muy interesante !

[@aahands]

They were also existed

[@RonaldoSilva-tn8in]

Restaurado ventilador de mesa a oléo querosene sem energia elétrica🔌 😉

[@aahands]

😇

[@oficinaaccarraro4445]

Ava....um vídeo cheio de frescura pegando parafusos com pinça, e no final não se mostra os detalhes de funcionamento Muito fraquinho esse vídeo

[@natalynataly6018]

Приобретите себе пескоструйку, и мир заиграет совсем другими красками😁

[@aahands]

😇😃

[@Alex_R88]

ему и так весело

[@petepeterson4540]

looks like it was laying buried in a caleche bed

[@donaldalexanderrichards4422]

It was buried in mud for a couple days then bake in the oven for half an hour before torn apart for restoration

[@aahands]

No sir

[@aahands]

🥰

[@1chesli]

Я понял, что перед созданием такого видео, нужно погуще облить объект реставрации жидкой глиной.

[@angelgonzalo2885]

Algún martillazo tambien habria quedao bien.

[@AshokbhaiPatel-g2o]

❤ ખુબ સરસ

[@РоманТолочко-д5н]

100 лет назад таких технологий уже не было,электричество было во всю....🤷😁

[@aahands]

Its exist more than 100 years ago

[@Hydrart]

I’m going to bring a car back to mint condition so all I need is a phone repair tool,wd40, a screwdriver and McGuyver.

[@edsonluiz5280]

Esse motor e muito antigo.e conhecido por engolidor de 🔥🔥🔥

[@ianallen2]

Yay ! ! Another BS restoration where the object is smeared with mud and baked then left outside for a couple of weeks. If that was in the mud for 100 years, the aluminium blades would have lots of corrosion on their edges, the crank would be seized and rusted to well beyond repair and all screws would be rusted in place and unable to be removed without drilling them out. The grease would not be grease either.

[@aahands]

👍

[@MohsenNasery-o1y]

هرچی خ استم خودمو قانع کنم نشد این ویدئو فیک هست چون پیچها به این راحتی باز نمشن

[@aahands]

Yes obviously sir. Screws are so hard to open

[@haydertaher3286]

My brother, your work is very beautiful, but I advise you to use sandblasting. It saves you effort, time and money.

[@aahands]

Thanks for your appreciation 😇 Yeah! Of course we will try to use sandblasting

[@ocsrc]

Wait, you mean people used to burn kerosene to power a fan in the HOUSE ??!!! WERE THEY CRAZY ??!! The CO would be extremely the dangerous and the heat the exhaust created makes it hotter in the house How could this be a thing back then ??!! How come we never seen this before ? I have studied history and I have never ever seen this in anything I have read. I am sure it is real but this could not have been a widespread thing

[@MASI_forging]

Outstanding workmanship 👏👏

[@Doodler-JL]

Considering how much stuff was caked on the outside of this device, I was quite shocked to see that the interior was fairly clean. Almost too clean. This thing is not sealed, so if it has been in a situation where it can be covered in a half inch of mud, the interior should have looked just as bad. Convince me something shady isn't going on here.

[@rohitshukla9756]

Great job done 👍

[@AbderahimHaddani]

THANKIOUPR❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@aahands]

😇

[@delmarleite4041]

I'm here not to see the "restoration", but to see how the table fan works...!🇧🇷

[@marianmicu8064]

[@aahands]

🥰

[@sergiomuniz9761]

Nunca imaginei que tinha ventilador a movido com combustível

[@mfreda]

Like it when he said let’s remove the rust. Looks like clay to me. This one looks so obvious

[@lawrence.porter]

Did you cover this in sand and then bake it dry?

[@alessandropezzella4121]

❤

[@aahands]

🥰

[@bayadere8308]

Obviously a fake, but the problem is 68k views in 5 days. The gullibility of some people...

[@NinjaTenK]

When you have no talent so you fake one

[@وردهالياسمين-ذ9ك]

❤❤❤❤

[@AdolfZachrisson]

"it was full of rust and mud,and the engine inside was completly stuck due to the rust"Hmmmmmmmm

[@deleihenriquebarros]

Why put mud on the piece? If it weren't for that fact, it would be an excellent video.