I continuously marvel at just how much the world of auto repair must have rejoiced, and cried tears of joy when cordless tools, especially ratchets became available.
@cubro647 ай бұрын
He used air tools haha
@kennethdefreitas3120 Жыл бұрын
I need you as my mechanic I just bought a f150 2.7 eco boost with 92000 miles the truck runs as if brand new. This is a very good video well done very explained I learned a lot thank you sir 👍🏾
@user-hl5pu3kh5j7 ай бұрын
I can't believe just how clean that 2.7 is with a 170K miles!
@discoveringmikey3 ай бұрын
Replacing my driver side turbo this weekend! I’ll update you on how it goes. You are the real mvp for this video on the turbo replacement
@christopherdavy21522 жыл бұрын
Read this if you’re looking for more guidance on the TSB regarding white/ blue smoke upon start-up after a cold soak (TSB 19-2188). I have a 2015 F150 with the 2.7 and I was getting white smoke in the morning. This tutorial is excellent. It provided everything I needed to know to swap the oil line on the driver side turbo. There are a few things worth mentioning though. 1. You do NOT need to remove the fender liner. I was able to complete almost all work from the top of the truck. Removal of the tire and air intake piping is necessary however. This was super easy though. There are several hoses and sensors connected to the intake pipe attached to the turbo, I counted 6 different ones I believe, so be careful removing them. 2. No power tools are needed to complete this job. I found hand tools like sockets with extensions and regular wrenches more than adequate given the tight spaces. 3. In the video I believe the gentleman said a 16 mm wrench was needed to remove the exhaust nut. I found the 16 was too big and used a 15 instead. I used a box-end wrench from the top of the truck, not a socket through the fender well. Both the bolt and exhaust stud were very easy to remove. 4. If you are just changing the oil line, you do not need to drain the oil or antifreeze. When I removed the oil line only the smallest trickle of oil came out of the engine block. 5. The oil line will require a bit of tugging to come lose. I pulled the line from the engine first, then pulled the line straight out of the turbo. Don’t be afraid to use some elbow grease. 6. I ordered the OEM replacement oil line from Tasca Autoparts using the part number indicated on the TSB (FU7Z 9T516 A). They might tell you the part doesn’t fit your truck, but it is appears to be the correct part (it was a direct fit after all). I believe the stock part was updated after Ford recognized the issue and released the TSB. I’ve driven the truck around the block and there appears to be no issues. I’ll give an update on a month or so. Thanks for the awesome tutorial.
@christopherdavy21522 жыл бұрын
Just an update. I’ve put about 300 miles in the heat of July, with about 2 hours of idling as well with AC running - no issues at all. The problem has been resolved.
@hientruong4074 Жыл бұрын
For 2018 and up, you have to take off the EGR pipe to get access to that
@OnePointLander Жыл бұрын
@@christopherdavy2152 Now that it is cold, are you still experiencing smoke?
@MrJunior4792Ай бұрын
My guy ford charged me 3,700 for the passenger side turbo replacement and took 2 weeks. Now I have the drive side bad. You just saved me money and time thank you! You explained it with perfect details!
@tadgmcgillicuddy81023 жыл бұрын
This is an amazing video. Thank you for making it. The part list is amazing also. I don't need it to repair anything but it certainly shed some light on how complex the replacement actually is. I would try this myself if required. Some people who have no idea on the cost have said oh no its going to be 5k for a turbo if it goes bad. The turbo assembly is $507 USD at this time. Really makes me feel better about keeping the truck long term.
@bskopper13 жыл бұрын
Great DIY vid. Most videos on KZbin annoy me with the long setups causing my ADD to kick in. This is one of the best.
@nicholashatcher37243 жыл бұрын
Nice to see this is the only replacement video on the 2.7. From what I gather, it seems like a well built engine. I’m on my second one already.
@robreynolds11724 жыл бұрын
That looks way easier than the horror stories going around, and the online experts telling you to trade them in before 100k. Not worried about keeping mine now past warranty. Cheers
@AaronHinesAuto4 жыл бұрын
Once you do one they aren’t too bad just a little time consuming. Parts in total is around $800. I would much rather do a turbo on an eco-boost motor then a lifter on a GM lt motor
@tomh67794 жыл бұрын
You must live in Arizona or somewhere. Here in Michigan that would be all corroded up. Dirty and rusty.
@johnoberle97503 жыл бұрын
I have the so called dreaded 5.4l 3v engine scorned by many. Little secret, Ford builds good engines. Change the oil sooner than Ford tells you. 5w30 instead of the 5w20 is what I do.
@yousufkan69604 жыл бұрын
First video on KZbin about 2.7 turbo replacement
@AaronHinesAuto4 жыл бұрын
Glad you noticed! So did i
@wisconsinlife39713 жыл бұрын
I truly respect guys like you.. I have parts left over when I change my oil.. Kudos..
@skizzle88guyАй бұрын
Best how to video hands down. Took me a little over an hour to remove .
@arielmelecio72434 жыл бұрын
Excellent nearly perfect narrative and great explanation of the whole process, Thank You Keep those videos coming, Looking forward to it! Above my mechanical skill and hope I never have to replace this part but I will save the video to show my mechanic if (God forvid ) I ever need to
@border411Ай бұрын
Man..... Completely amazed on how easy it is/you made it look! Thank you!
@AmyWieseler2 жыл бұрын
We just paid $2500 to have ours fixed and picked it up today and it sounds worse! And left with them telling us that now the other side is bad when it wasn’t before we drop d it off
@zx9green7914 жыл бұрын
Wow great video you are the man. That was a lot of work. At least it made it to 170k. Have you seen this happen often. In your opinion How long do these turbos last. Thanks for ALL your great videos.
@jesusgomez141634 жыл бұрын
Exellent step by step!!!! Great work!!
@AaronHinesAuto4 жыл бұрын
Thanks a lot!
@dmontrose74462 жыл бұрын
Great video! My son bought a 2016 F150 2.7. 60k. No problems yet but wanted to see how to do this.
@johnhall61944 жыл бұрын
Excellent step by step. Thank you. Any concern the passenger side turbo would need replacing as well even without throwing a code? I know it's expensive but just wonder at 127k miles if it makes sense to do both. I have a 2015 F150 2.7L super crew and love it.
@cessealbeach3 жыл бұрын
You speak very clear and your videos are Great! Thanks
@garrettmitchell40222 жыл бұрын
Thanks for making this video, replacing my 2015 f150 2.7 eco boost driver side turbo once I get the parts, great breakdown and info!
@jetboy7703716 ай бұрын
Did you replace your turbo, how did it go ?
@evanyoungworks Жыл бұрын
Great video man! Replaced the drivers side this weekend, went great!
@chrisrui6616 күн бұрын
aweson !!!!!!!! my turbo oil line are rusted and crisp leak oil, thanks!!!!!!!
@chrisrui6616 күн бұрын
try to ask, the oil line for the turbo has rusted, should I replace the whole turbo include the line or just the line only, as turbo seems need replace over time
@carsonbird89154 ай бұрын
Ya make it look so easy with the brand new parts comin off and new new goin on. It is Not all the parts didn’t wanna come off or on
@ftby59mikeD4 жыл бұрын
Excellent & informative!... my 2015 2.7 with 90k miles isn't throwing any codes but I'm getting the waste gate "rattle". I suppose replacement can't be too far off.
@BrianSmith-si4zd2 жыл бұрын
Mine rattled since day one. According ford that is normal.
@ftby59mikeD2 жыл бұрын
@@BrianSmith-si4zd lol, turns out it was the cat heat shield!
@xilbus10 ай бұрын
@@BrianSmith-si4zdsame for me since day 1 as well. Im at 67,000km on my 2019
@JoseGuerrero-tc6im Жыл бұрын
I’m curious, I recently bought a new turbo from rotomaster and the instructions stated to add some oil on the feed line and spin the propeller by hand to coat the bearing so when it starts for the first time it’s not running dry of oil. Secondly it also states after installation is complete to pull the fuel pump fuse out and crank the motor to build up oil pressure (without starting the motor) then to add the fuse back in and start it. Is this something worth doing or is this going the extra mile?
@brianfinn76444 жыл бұрын
So the newer 2.7 uses an electric waste gate right? 170k for turbos isn’t bad. They apparently changed their oil regularly.
@camberwellcarrot4203 жыл бұрын
Is replacing that wastegate actuator as simple as it looks like it would be? Are there good quality aftermarket ones available?
@mxrevival Жыл бұрын
Super grateful for this video, thank you for taking your time to capture, film and edit it 🔥
@NORTHSHOREEDITS4 жыл бұрын
Great video, engine sure clean for the mileage
@jesusmagdaleno1294Ай бұрын
Just did this job. Your video was super helpful.
@samaanalkhaldi23643 жыл бұрын
I wish the 2.7L V6 EcoBoost engine available with the new Explorer XLT and Limited. I think the small 4cyl 2.3L has too much turbo boost and this will affect the long-term reliability. Regards.
@steveo201 Жыл бұрын
Your pretty good bud definitely changed my mind I figured turbos were 2500 for the pair looked up on google with your link there 550 I can afford a stupid spinner gadget truck. And afford to replace them when they go out looks like you spent about a whole hour making the video too kudos very informative man
@valentincabada15188 ай бұрын
Hi how much was your turbos
@xilbus10 ай бұрын
Up here in Canada dealers quote 5 to 6k to replace turbos. Crazy stuff. Its probably 50$ made in china per turbo.
@speedr733 жыл бұрын
I have an exhaust leak at my passenger side turbo. I tested it using an evap leak detector/smoke machine. If I want to replace both exhaust gaskets for the turbo, do I have to remove all those lines? I think it’s just the cat donut gasket leaking, but was gonna do both while I’m in there. But if it’s too much work maybe not. Thanks so much for this amazingly comprehensive video!
@ZURITROY13 Жыл бұрын
I don’t need to change it as its still good. But doesn’t hurt to learn early 😌 thanks
@yjzep99223 ай бұрын
Hi I'm looking at the parts list. Seems off. Why do I need 3 turbo to manifold gaskets? ( fl3z9448b) 2 for left, one for right? Why does the left need 2?
@niceguy49284 жыл бұрын
Can you do a 2017 ish passenger side turbo on a 3.5 ecoboost explorer sport . Thanks again
@ckmoore1019 ай бұрын
that is the cleanest 170k fleet engine in existence
@stevewhiting5566 ай бұрын
My salesman had a 2015 transit 350 that was traded about 2 years ago. The spark plugs were replaced twice, but it was just as clean as this one but had 320k. The south doesn’t eat vehicles like the north. It helps that it never had a leak or anything too. My 2015 with 135k looks like it just came off the showroom under the hood. And aside from a couple bumps and scratches, the paint looks new too. I’m here because I just got the same code and it’s starting to smoke.
@wolf198425ify2 жыл бұрын
Iv got a 2016 . No codes but smoke bad . If I drive at speed no problem but if I pass it wants to redline and I hear a whine from turbo. Is that a sign of bad turbo I need to replace.truck only has 13 k miles
@jesusrobles41073 жыл бұрын
This video is great it’s full of great information thank you for that I do have a question what is that aftermarket fix for the wastegate that you said you wouldn’t use because it’s a fleet vehicle
@robertmurray9022 Жыл бұрын
Wow what a Job !! Guess I’m going to my mechanic for this one . Nice video!
@larssweede2123 Жыл бұрын
Would you please let us all know how much they would charge? I know here in Northwest Ohio to replace a bad turbo on a 3.5 eco-boost at the Ford dealer is around $6000 😂
@jetboy7703716 ай бұрын
Are you serious ! That's crazy. I live in Sylvania and have a 2020 2.7 echo with 20,000 miles. I'm hoping nothing ever happens but if one goes out I want to do the work. Doesn't look to bad to do. Just retired early as a aircraft mechanic and I've fought a lot of engine valves that look like this.
@ysitrim884 ай бұрын
Good detailed video even though its 3 yrs old.
@briantufaro1953 Жыл бұрын
That's an impressively clean engine for 170K!
@nickhawes-tn6pz3 ай бұрын
I have a code showing a loss of air pressure from the turbos. How can I diagnose the issue?
@AntonioCamarena-qm3xj2 ай бұрын
Hi there Aaron, question: on that Ford 2.7 EcoBoost turbo, do you have a video on changing the passenger side turbo? Gonna change mine next weekend. Hope you can reply asap. Thanks i'm advance.
@bgsound27213 жыл бұрын
Excellent video, very well done
@pbaker7160 Жыл бұрын
170k miles. That's a good sign for longevity.
@bobsonlin12311 ай бұрын
This is such a quality video. You deserve a lot more views.
@MetalMike21122 жыл бұрын
Excellent Video! Thank You For The Great Explanation And Very Good Video Quality!
@danielleclare29383 жыл бұрын
I would be changing out that actuator but what do I know maybe the turbo is baffed. Anyway that is a lot of extra stuff just because of a vacuum diaphragm.
@timschultes64673 жыл бұрын
Do you still recommend the 2.7? I just bought a 2020 F-150 2.7
@juancue20093 жыл бұрын
Me too
@Lab-Rat3 жыл бұрын
Got my 2020 2 months ago
@timschultes64673 жыл бұрын
@@Lab-Rat I love mine. Just change the oil between 5-6,000 miles with a good synthetic oil like Mobil one. Great engine
@RoscoRide3 жыл бұрын
I have a 2.7 L in my regular cab short box 4 x 4 2016 F-150 In this configuration it is faster than the 5.0 V-8 F-150. I also have a 2015 mustang GT performance package which is tuned if I had to buy a 2020 or newer F150 it would be the 2.7 L again
@timschultes64673 жыл бұрын
@@RoscoRide I really like it so far. They updated the engine in 2018 to have another injector to clean the valves to prevent the carbon buildup. It’s very efficient on fuel as well. Hey I have a Mustang as well. I have a 2007 Shelby GT before the GT 500 came out. It’s supercharged with 580 hp and cat deleted exhaust
@TrashHunt2 ай бұрын
Excellent video!
@maximelepore49853 жыл бұрын
makes me want a cab over delivery truck to have space to work
@Michael_Scott_Howard4 жыл бұрын
Wow that is a lot of work.. good job
@AaronHinesAuto4 жыл бұрын
ya it took awhile for me to make this video lol thank you!
@brianmiller63404 жыл бұрын
@@AaronHinesAuto When you say "awhile," how many total hours did you invest in the actual work, not including the on the fly explinations? Basically, I'm a heavy equipment tech, and swapping a turbo on say, a John Deere 624G took me less than a day, but my 2.7 L F150 obviously has a lot more stuff in the way. If this took longer than a 10 hour day to replace, I might be looking at paying someone to do it instead of doing it myself for just the cost of parts.
@WhippinWitDuff Жыл бұрын
If im not mistaken i believe book time to replace both turbos is 7.2hrs. Ive had techs replace both of them in about 4.5-5hrs at my old job
@CarlosDXsman4 ай бұрын
Thanks
@671xgaming8 Жыл бұрын
You are a god send thank you
@leonardoaragones27383 жыл бұрын
Thank you for showing us
@SamSam-ke9zy Жыл бұрын
So it isn't necessary to replace both turbos when one is bad? Im at 140k miles and getting P0299 and shop says the right side is not having adequate intake pressure. And suggested replacing both because that what ya do.
@jakobh62573 жыл бұрын
Great video 👍🏻
@user-nr6hg1sf6l Жыл бұрын
I have a 2017 Ford F-150 XL 2.7 l EcoBoost both of my Westgate open up so they tell me if the turbos so does that mean I have to replace both turbos
@sawjames6620 Жыл бұрын
Where do I buy the hoses or clamps that go to the driver side turbo charger? The green one is cracked causing my check engine light to come on. Can anybody please help me?
@frankpuccio60043 жыл бұрын
Great video, do I need to drain the coolant if I plan on only replacing the oil feed tube?
@khall79663 жыл бұрын
Did you ever find out an answer? I need to do the same.
@R1Kyle2 жыл бұрын
No you do not, the oil and coolant lines are separate.
@robertmurray9022 Жыл бұрын
About how much should this job cost? Plus , about what time frame is needed to install this item ?
@dianacameron5373 Жыл бұрын
Hey I am having to change my turbo since the wastegate is having problems. For the number of each item needed, is that what is in parenthesis? For example, 12.FT4Z6N652D Gasket (3) is the 3 how many I need to order for the right turbo? Thank you in advance
@davidalvarez39292 жыл бұрын
So the other day my truck went into limp mode do to problem with the throttle actuator open removing and inspecting i found a blue o ring caught in the throttle plate could this be part of the turbos?
@damienmcfarland43972 жыл бұрын
Hi Aaron, can I add duel turbochargers to an 2007 Ford Expedition, the exact way as you've demonstrated? Thanks in advance!
@stephenhusak60983 жыл бұрын
Ford went off the deep end with these little motors in full size trucks.
@bobroberts23713 жыл бұрын
This is what it takes to get 19 ish MPG city and 25 ish highway out of a 325 HP motor. Would you rather have a 1979 F150 with a 460 that gets about 6 MPG and makes 214 HP ?
@anthonycardona31412 жыл бұрын
Awesome video dude 👍
@Maranda369 Жыл бұрын
I have a question! Do you know what that kind of bolt needed for the coolant pipe you remove at 9:45. The T45 i need a replacement one! Thanks!
@reymundosaiz34922 жыл бұрын
Question I have 2015 2.7 was told turbo on right side is bad. Blue smoke as you drive,. Is it possible to delete the turbos
@williamenglish518 Жыл бұрын
Hey man I need to change out my fuel pressure sensor on my 2.7L 2017 P0087 idk where it’s even located ! Can you help?
@GNR3253 жыл бұрын
Have you had any others go bad in the fleet or is this a one off? What is your opinion of the 2.7 for long term reliability/durability? Great video!
@blackericdenice3 жыл бұрын
170k miles and it only need a diaphragm is good.
@Billy283762 жыл бұрын
60k trouble free miles so far.
@larssweede2123 Жыл бұрын
@@blackericdenice good for the mechanic shop maybe. I guarantee they charge some people 5-6k to tear this vehicle down like that
@theredneckboys7701 Жыл бұрын
I have a 2015 and at 180,000 Mike's and mine is in the shop right now with 1 bad turbo but getting both replaced
@willie93973 жыл бұрын
did you prelube that turbo I always do
@borla10010 күн бұрын
How do you check the boost
@Angry-Little-Fish7 ай бұрын
I took mine off my turbos from a 2015 2.7l f150 and put them on my motorcycles 😂
@daviddurham46592 жыл бұрын
The engine looks new. Not 6 years old with 170k. I’m assuming this is not in the north?
@kellyharper77042 жыл бұрын
Is it normal to have some black smoke after changing them?
@SamSam-ke9zy Жыл бұрын
How much for parts? Christian Bros are wanting $5700 to replace both my turbos on my 2016. I replaced my 98jeep engine, figure I ciuld save a few thousand and do this myself also.
@spidusp10 ай бұрын
How long does it take approximately to do this job❤?
@ship4brains692 жыл бұрын
Something missed: precharging the turbo with oil using a hypo syringe , disconnecting fuel supply, and cranking the engine ( NOT STARTING ) to pressurize the oil supply to the turbo.
@carguy2256 Жыл бұрын
How do you disconnect fuel supply and is there a specific syringe size needed?
@jamesmanson2152 Жыл бұрын
@@carguy2256 Probably just pulling the relay or fuse to the fuel pump. Pretty sure holding down the gas pedal and then holding the key in the start position will crank the engine to build up oil pressure without pumping any fuel.
@SamSam-ke9zy Жыл бұрын
With the tiny oil filter on the turbos you think the oil filler line should be changed out more often to prevent damage to the turbo?
@Cape-bp2qj9 ай бұрын
nah id say whenever you replace the turbo swap the line with the filter on it. shouldnt have that much build up if you changing engine oil and filter at a decent interval. if there constant build up on it you have bigger issues
@SamSam-ke9zy Жыл бұрын
Damn fine video.
@mikey27437 Жыл бұрын
Aaron, in terms of reliability, dependability and lower cost of service in the long run between 2.7L and 3.5L eco boost engines which would you recommend? Thank you.
@level5599 Жыл бұрын
2.7
@timpeterson70922 жыл бұрын
Great Video!!!!! quick question..... I have a 2016 f150 2.7 Eco-boost that is blowing white and a little blue smoke out the tailpipe on cold start, I have been reading that it has something to do with the oil bypass tube, can this be replaced on its own or would the whole turbo need to be replaced? Also , how long would changing the Turbo take? Thanks......
@hammersticks71382 жыл бұрын
I'm having a similar issue. There's a technical bulletin from ford saying that the left hand oil feed tube is leaking oil on a cold soak causing for excessive smoke on start up. Took it to ford and they confirmed the issue but wanted to charge 800 for it. They said all you need is to have that line replaced. I have a powertrain warranty. Part is not covered under their warranty
@Fishingpodcast Жыл бұрын
Hey buddy, I’m doing a turbo swap on my passenger side. The parts list that you have wasted is everything I will need 2015 F150 2.7 L?
@Fishingpodcast Жыл бұрын
Listed
@blackericdenice3 жыл бұрын
How do you install fuel rail o-rings on a 2.7?
@270126203 жыл бұрын
Time to upgrade the turbos
@northlander43703 жыл бұрын
Cant you just replace the actuator ?
@dougekren64953 жыл бұрын
Yes you can
@samueldeutscher2 жыл бұрын
Is this the same procedure on the 3.5?
@ROR2379 Жыл бұрын
Hi my friend.. Where did you bought the turbo?
@mcgovernjimmy3 жыл бұрын
Kick ass.
@shawnchappelle19662 жыл бұрын
Can you tell me the cost to replace the turbo!
@RayTuttle-of5qd3 ай бұрын
I can’t believe Ford sells these things with a straight face ! No way I would buy a full size truck with that puny of an engine!not only that they are proud of them!what was that pile new 70.000 plus ! P.T.Barnum said it best theres a sucker born every minute
@khall79663 жыл бұрын
Would it be necessary to drain the oil when doing this job? I don't need to replace the turbocharger just the oil filler tube...
@AaronHinesAuto3 жыл бұрын
Yes. Would be a good idea to put some fresh oil in it.
@khall79663 жыл бұрын
@@AaronHinesAuto Thanks. But I had my oil changed just last month. My question was does the oil need to be drained in order to changed the tube. If I leave the oil in there will it all come spilling out when I take that tube off? In your video you show draining the coolant but not the oil. Thanks,
@speedr733 жыл бұрын
The passenger side is completely different and much more difficult. If you’re watching this video to do both sides, don’t start using only this video as instructions. You’ll get stuck...
@socachris2k115 ай бұрын
Can I pay you to change mine out? Really serious
@jimkopko60922 жыл бұрын
If only I was a tech in a southern climate! Good video but our northern vehicles look nothing like this. Exhaust studs that are nothing but a rusted blob and seized oil and cooling tubes turn it into much more of a job than this.
@larssweede2123 Жыл бұрын
So basically we’re looking at a $4000 repair job for a $25 turbo wastegate diaphragm? Why would Ford make the turbo so inaccessible? Crazy how many people still want these small turbos