Abandoned for 20 Years! Will It Run New World Record? Stock Chevy Van Bottom End for a Blower Motor!

I picked up this van from a local scrapper this past summer. Not knowing what to do with it at that time I have since decided we should see if it will run and if it does we should try putting my 671 blower setup on top of the stock bottom end! Seems like a terrible idea right? Well, lets see if we can get it to run first! Neither the engine nor the van is for sale at this time. As always, thanks for watching!
Check out our new and improved Mortske merch site!!
mortske.com/
Join the "Duff Approved!" team to get access to perks like merch discounts, behind the scenes access and more!
/ @mortskerepair
Drop Duff or Mortske a line: [e-mail]
Instagram: / mortske_repair
Ship us things if you wish:
PO Box 1
Gwinner, ND 58040
Tools we use:
Rubber tool mats: amzn.to/34FEw6R
Cyclops shop light: amzn.to/3oKaRAu
Ultrasonic Cleaner 10L: amzn.to/32fwikN
Greta Unapproved Fuel Jug: amzn.to/30R74bt
Noresman drill bits: amzn.to/3CtoYAf
Norseman reamers: amzn.to/3B0YMtH
Spill proof funnel: amzn.to/3BmRMbd
Teslong endoscope: amzn.to/3sxysos
Streamlight Pen Light: amzn.to/3gSe3qA
Zep45 Penetrating Oil: amzn.to/3taR64i
Marine tank: amzn.to/2S6oUmf
12V inline fuel pump: amzn.to/3eHOGVC
1/4NPT to 5/16" hose barb fitting: amzn.to/33qPSYp
5/16" rubber fuel line: amzn.to/2SsLNjZ
Hot Sauce bottle: amzn.to/3u96zmS
Loser switch: amzn.to/3xEuL2s
Milwaukee 3/8" cordless ratchet: amzn.to/3wsHW6a
Milwaukee 1/2" Impact: amzn.to/3xDpzMb
Milwaukee 3/8" stubby impact: amzn.to/3e61pT9
Tekton 3/8" SAE deep impact socket set: amzn.to/332CZDv
3/8" wobble extensions: amzn.to/3nANCXw
GearWrench spark plug socket set: amzn.to/3uutdG9
Smittybilt XRC12 Winch: amzn.to/3eGG2qx
10 Ton Snatch Block: amzn.to/3gO6voI
Ingersoll Rand air hammer: amzn.to/3e7ULLY
Barrina LED Shop Lights: amzn.to/3gWiHDR
Filming equipment we use:
GoPro Hero 8: amzn.to/2PHSU7m
Camera light: amzn.to/2PB2SHp
Handheld camera mount: amzn.to/2QJBWG3
Suction cup mount: amzn.to/3vqC1Nw
Sammich donations gladly accepted on Patreon :
www.patreon.co...
#supercharged #smallblockchevy #willitrun #mortskerepair #diywiring #engineswap #abandoned #ranwhenparked #barnfind #patina #oldjunk #mechanic #rusty #rust #hackmechanic #mousehouse #mice #barnfind #abandonedcar #rustygold #carbrebuild #carburebuild #fieldcar #donorcar #deadpaint #patina #abandonedcar #wiring #battery #batterycable #junkyardcar #junkyard #junkyarddog #duffdog #V8 #donuts #burnouts #burnout #hotrod #rusty #project #headers #exhaust #swapped #engineswap a #brittanyspaniel #revival #overheating #overheated #cooling #coolingsystem #radiator #thermostat #waterpump #rust #dilemma #SBC #detonation #theblowershop #blownengine #pistondecay #preignition #timing #inspection #engineteardown #engineinspection #msdignition #holleycarburetor #supercharger #failedengine #failedproject #van #vanlife #vanliving #storage #beauville #chevyvan #th400 #hei #quadrajet #brakes #stuckbrakes #peoplemover #peoplehauler #inavandownbytheriver #sawzall #torch #engineswap #engineupgrade

[@egodeathplease]

I dunno blower on top of an old used engine? About as exciting as farting in a coffee can and saving it for later😢.

[@MortskeRepair]

both sound pretty exciting to me!

[@davidarnette327]

​​@@MortskeRepair...I only have k cups ,I don't know how to save a little whiff for later in those

[@richardthomas1743]

@egodeathplease , Lots more exciting than what I see on your videos, that fart in the Coffee can is definitely more exciting .

[@shawnamiracle5500]

how many cans you got? GTFOOH.

[@corydriver7634]

😂

[@sweettony9359]

Mad props to these car guys. Been watching a bunch of them for years (including Mortske) so I finally worn the wife down and was allowed to get an old 59 F100 w/ a 223. Been working on it for a few weeks and my baby-soft hands are scratched up and permanently dirty, my garage is a disaster, and every piece of clothing I own smells like PB Blaster and salty tears. I'm sleeping on the couch and eating dinner with the O'Reilly's guys in town. My whole body hurts and i'm broke. I dont know how they do this for years on end. I need a vacation already and it's been like 13 days.

[@MortskeRepair]

Congratulations and good luck!

[@JeffKopis]

Now you know why I NO LONGER work on cars! My car habit (100 and counting) has cost me 2 bankruptcies and one marriage! Also, because I suck at it.

[@doughaven-rf8id]

I hear ya, isn't it great !

[@alanmoore78]

@@JeffKopis dude at least you hit a hundred, I've stalled out in the low 80s, and between cash for clunkers and covid I can't buy a Cheap Ass Car™ to save my life

[@johnm.5848]

Mortske is the official Monday Morning Blues Buster of KZbin.

[@MortskeRepair]

Blues Clues?

[@Mrhalligan39]

I had a case of the Mondays, but then I watched Mortske!

[@timmatheny-lo9ze]

Love watching Duff doing zoomies around the property.

[@dsteelgroup301]

I literally spit out my drink when I saw Puddin’ pop out with his “fire from the hip” clip 😂 You got me there, Mortske… 👍

[@jeromereed1097]

Back in my younger years I used to drive a GMC van that we put a bored, balanced, cammed 350 with a built turbo 400 with a 3000 stall speed converter in it. It was a great sleeper to street race and lots of fun till I lost my drivers license when I got caught racing!

[@AdamJ09303]

Ok

[@theofficialdiamondlou2418]

Yep I have an 87’ sitting out back. She has a factory 4b 350 TBI with a slightly higher lift cam. T400, 12 bolt . It was a custom ordered for towing so it has beefed up rear sus. But she’s getting old now @ 320,000 + miles. But in her day. She would eat stock mustangs.

[@MortskeRepair]

Thanks for sharing!

[@Vince-m2m]

Bummer

[@russell154]

Chin gets me with that spider every time. Well 60% of the time, it works every time. Thanks for the great content as always Mortske.

[@MortskeRepair]

sneaky!

[@fishslayer8533]

Your dog running back and forth cracks me up lol he's having fun

[@MortskeRepair]

Livin the dream

[@dennisconnolly1]

I mean what you go through to put these videos out, none of us really even have a clue. But I for one do appreciate what you do, and as always thank you for sharing!

[@MortskeRepair]

I appreciate that

[@michaelweilmuenster5754]

That was one of the funniest test drives I've ever seen on KZbin. The billowing headliner gave the illusion of speed. Gotta love the old hoarder box on wheels!👍

[@MortskeRepair]

you know it!

[@georgeponnay447]

Hoarder Box on Wheels.... Love it👍😊

[@jeffhutchins7048]

The 'ol Blow-By Blower Motor! At least you won't have to worry about your ring gap on your Blower Motor.

[@MortskeRepair]

Hopefully!

[@jeffhutchins7048]

MORTSKE MONDAY! Mortske, livin' the Tan VAN LIFE!

[@edc6333]

Mortske Mayhem, Mortske Madness, Mortske Manure, the list is endless!

[@DeadReckon]

With those white steelies and caps on that van, you better watch out, Puddin might come along and leave this thing on blocks!

[@MortskeRepair]

Or heat up the coils...

[@DeadReckon]

@@MortskeRepairSlammed storage shed, that's what every man needs!

[@Awsom47Merc]

* Damn It Mortske You Be Careful !!! Spraying all that hot sauce vapor in a confined space around all those jenky wire connections your gonna pull a Leno and blow your friggin' face off ! 🔥🥵🔥 And you ain't got the money to have a new one installed like Jay ! Us old retired guys depend on you to supply us with our Monday afternoon entertainment ! We're on fixed incomes and your show is cost effective . 🤭👍At least you keep Duff at a safe distance.

[@carlbernard4197]

Would put new meaning to the words " express facial" 😮😮😂😂😂😂

[@Johnny-jr2lq]

Gotta kick out of Dalton’s Van build that thing is mean!!!! Never stop doing Mortske’s minute love the history.

[@MortskeRepair]

Ya, his stuff is way cooler than my garbage.

[@Johnny-jr2lq]

@@MortskeRepair Na your just a different kind of energy that’s all Mort. Besides I know you like to play with peoples emotions Sir. Can’t wait to see how that bone stock 350 handles that blower. Better give er da beans 🫘

[@TylerDuysen]

@@MortskeRepair some of it but lets be fair you got some very nice stuff too his upside is he can paint and make garbage look decent and you are stuck with garbage that looks like garbage

[@davidvann9387]

Just gonna tell you them sh!t diggers on the back are TBC Corp made by Cooper. I got 28 years at the Texarkana Arkansas Plant. That's pretty neat!!!

[@stuartfletcher5407]

Your Mortske minute is second only to your expertise in removing van engines . Thats the first time Iv'e ever seen it done with a saws all . Good thing Duff Dog didn't go with you on the test drive , he would have run off home and left you , however things worked out and you made it back safe. What ever you put that blown motor in is sure to be a success . Till that happens I'll be here waiting with high hopes . Take care , God Bless , Keep on truckin . Stuart in Canada ..

[@MortskeRepair]

Best way to do it! Thanks for watching Stu!

[@derekwalters6132]

Hey these will it run’s are turning into the will it run so I can take it for a sketchy drive afterwards videos, and you know it’s gonna be a sketchy ride when even Duff says “ No I’m good” when you ask if he wants to go for a ride. And I’m still looking at the heavily patinaed truck in the shop without the hood and thinking that thing needs a blown small block in it, it’s already got the stance

[@KD0LRG]

​@@MortskeRepair I always used a saw at the u pick it lot. Back in the 80's when going to the yard was a real treat, they would bring the "yard car" with the torch in the back seat and just cut it out for you. They also heated the office with a wood stove powered by waste oil and had the best ashtrays of used diesel pistons. Made the ashtrays we made in school look lame 😂.

[@philben_454]

Speaking of Dalton, he could probably use that front bumper.

[@davidarnette327]

With a blower you got to open up the ring gaps . But any blown sbc engine would be cool in any of those cars or trucks sitting in the shop.

[@MortskeRepair]

guess we'll find out

[@DOYLEMASTERS]

Really like your Mortske Minutes. Very informing. Thanks for sharing.

[@MortskeRepair]

Glad it was helpful!

[@tomfoust711]

Got to keep Mr DUFF SAFE good Info that's the way I would have taken it out😊

[@cl1587]

I always enjoy the Mortske Minutes. 😁👍

[@MortskeRepair]

Good to hear!

[@chrisbasler3818]

Great video! My dad worked at willow run hydromatic that built the turbo 400.

[@MortskeRepair]

Thanks for sharing!

[@Awsom47Merc]

Mortske, wanted to let you and the subscribers know to tip a cold one to Marcelo Gandini designer of the Lamborghini Miura, Countach, Diablo etc. Just heard we lost him yesterday 3/13/24. 🍻😔 That man had an eye for automotive beauty.

[@MortskeRepair]

Thanks for sharing

[@johnsommerfeld6889]

Stick a blower on it for sure! Lots of room for activities without the seats in it. Thanks for the video, they are always the best part of a Monday morning.

[@LinusCloudbuster]

My man gave a little salute when you said blower on the 2 Wheel Dr. blazer. That’s my vote.

[@MortskeRepair]

Right on!

[@mikepraed4623]

Oh..yeah! A Mortske VAN Monday!😊

[@MikeInBendOregon]

When you referenced "Carpet Munchers", I'm sure they will like the van a lot better with all of those seats out of it. Makes the task at hand much easier, if'n ya know what I mean, although a little foam padding wouldn't be a bad thing.

[@MortskeRepair]

No comment

[@danimal4959]

that motor and blower can go into so many of your projects,can't wait to see what you do next...thanks mortske!! 🍺

[@joelkarch3538]

blower + catalina= catalina brain mixer! thanks for another great monday my man.

[@MortskeRepair]

Glad you enjoyed!

[@nick540g]

I'm guessing that not every project is a money-maker, but if you're having fun and paying the bills then more power to you! Thanks also for consulting with Pudden on his Model A project. He might have been in over his head on that one.

[@BucksSuperStereoWorld]

When I was about 4 or 5 my babysitter had this exact same van that we would ride around in. I remember her name was Marcella in Allentown, PA back in 1987 or 88.

[@MortskeRepair]

She sounds like a nice lady!

[@BucksSuperStereoWorld]

@@MortskeRepair Those were the good old days!

[@russellfuchs7903]

Allen town, wow, lots of history there. I'm serious.

[@Atomshamradio]

The roof liner blowing in the breeze that’s great😅

[@egodeathplease]

Just looking at that big red headliner a blowing in the wind. All the local farm boys gotta be thinking about making a dress for their purtiest cow❤

[@MortskeRepair]

oh dear...

[@CruisinWithKevin]

I think you should put that blower motor in that 36 or whatever year truck that was you worked on a couple episodes ago. That would be legendary

[@BucksSuperStereoWorld]

The bottom end of that 350 sounds really good, but that BDS 6-71 on a stock bottom end reminds me of the Draguar that Dave Freiburger and Mike Finnegan built in the parking lot of Gotelli Speed Shop in California. It ended up running like crap and overheated to the point of warpage. I would definitely treat it with some aftermarket aluminum heads, a valvetrain upgrade, and a blower cam before bolting that big beautiful bastard onto it. You know more than I do about engines though. You've worked on damn near everything...😂😂😂

[@MortskeRepair]

May as well find out! Can always upgrade it later!

[@BucksSuperStereoWorld]

@@MortskeRepair You are definitely true sir!

[@redneckbryon]

2003, was Bush 39:30, Funny we could see the reflection in your glasses, of the gas tank falling off the roof. Wish you shipped to Canada.

[@kennethsonier1766]

Good morning from Cape Cod 🦈 I saw Dalton's revival on the van, I was waiting for the whole bunch of them to get crushed. Thank God they succeeded. Anyway your removal was completely drama free. I think the blown 350 should go in the 56 Bel Air, Dan would love it. Keep up the great work and the awesome content 👍✌️🇺🇲

[@MortskeRepair]

Thanks! Will do!

[@franciskelley2248]

I would like more video on that “61” bubble top , put the blower motor in that machine & make a gasser , that would be a cool going to town rig !

[@TheInfamousHotRodFarm]

Hell yeah my brother! Love the Mortske Minute!! good learnings!

[@MortskeRepair]

Glad you enjoyed it!

[@TMVarchive]

I've always had a soft spot for those old G-series vans. My dad used one (cargo van) as a company vehicle when I was little and I always loved it for its simplicity and utility. I even loved the way it smelled...probably my first whiff of new car smell now that I think of it.

[@MortskeRepair]

Thanks for sharing!

[@richardthomas1743]

Hell YES! Lets do this! Budget Blower Motor! 👍

[@MortskeRepair]

Right on!

[@terrytye6497]

Vans are great for storing everything. Been there done that. Good motor and transmission for little dollars good deal.

[@grantkoeller8911]

The more you show this van, the more we realize that this is a super nice van!!!!!

[@JeffKopis]

A year from now, I might be in Florida, living in one. By the river, of course. The things we do for a girl...

[@steve-tx2tt]

You could fix up that van and sell it as a luxury undocumented migrant transporter,,,

[@buddybarker8511]

Keep your political comments for stupid social media sites !

[@MortskeRepair]

how much does it pay?

[@revivalranch4231]

If you know the right coyote you can make 15gs a load.

[@Boogieshoes-s9o]

$2,000 each illegal

[@mike-rg5gi]

😂😂😂

[@error52]

I love how the radio is mounted directly above the blazing 350. Talk about hot tunes! good thing it's not a cassette player, otherwise you get a melted tape for sure.

[@rickeyhecht1919]

Monday Morning Mortske best way to start the week

[@Atomshamradio]

Theirs good stuff in the van man the possibility’s are endless 😂

[@johnelliott7375]

I'm feeling your pain on the half and half metric and SAE fasteners on the vehicle and I will never forget when my tool box had doubled in size to work on things in the 80's and 90's. 31:07 31:08

[@MortskeRepair]

good times!

[@christianbattestin9747]

My uncle Ed had an '87Chevy van in the mid 90s. It was a green half ton window, very dented up and missing the rear seat. He put the stereo from my grandmother 's '87 Oldsmobile Calais after that car's engine blew up. He also gave the van front seats from a '70s Ford but couldn't recall what model. The van had the EFI 231 V6 and ( I guess) TH350. He also put load leaves above the rear spring packs.

[@glennnickerson8325]

If the engine doesn't work out Mr. M, you could always park the carcass somewhere out on the Prairie. Every town needs an Uncle Rico! Gosh!!!

[@MortskeRepair]

down by the river!

[@alanmoore78]

46:29 first time I saw a G-van getting an engine pulled was high school auto shop, it was a raggedy '76 G20 with the 400 coming out to go in the teacher's Hugger Orange '69 C10 short wide. And yes, he had students taking air nibblers to cut the front of the van completely off. No reciprocating saws or grinders allowed. That was for second year students, us first year kids were rebuilding a nice little fleet of Quadrajets. Probably to also go in teacher's C10, if not soon, eventually.

[@imheretolearn770]

That era of vans was so good. My dad rocked those when I was a kid and they were always good to go.

[@MortskeRepair]

REliable transportation!

[@AaronBrevik]

The headliner flowing in the wind is simply majestic. Another great video Mortske, Duff, Mojo and Chin.

[@MortskeRepair]

glad you enjoyed it!

[@RowdyCStuff]

Those van seat stands are good for converting other bucket seats into a pickup truck. The astro van seat stands are the best but those would do with some modification. Tech tip of the day!

[@MortskeRepair]

Thanks for the info!

[@AnthonyRBlacker]

I have a feeling it takes just a teensie weensie bit more a week than an hour and 20 minutes to have a KZbin channel with hundreds of thousands of followers.. You have to have that je ne sais quas like Morstke does, that fait de complete.. something I surely don't have, which is PATIENCE and dedication and FANS and all that fun stuff!! Nice job though, love seeing these old engines revived! (even the smog era junk, it's still good bones under there) edit: oh yeah that beanie is my favorite of all time.. thanks man, great choice on the hat! I love it!

[@MortskeRepair]

Nah, it's really, really easy. And everyone on the internet is so nice!

[@joeburns1571]

Mortske Minutes, speed will it runs, time lapse with scootin music, and background Mojo setting the pace. Fun show today sir!

[@MortskeRepair]

Glad you enjoyed it!

[@kr8219]

Loved that roof liner flowing in the wind like something out of a horror movie. 😮

[@spencerrobinson2719]

That seemed to be the slickest v8 removal from a van. Looks like spring is coming!

[@chrisreynolds6520]

My 83 305 had that exhaust system. Added a dr gas X pipe to it 20 years ago where the pipes meet under the driver seat. Worked extremely well, flowed well and was quiet.

[@throttlebottle5906]

the mid-brake-hose metal holder brackets rust around them and pinch them shut, while the hoses should be replaced, you can spread the holders open and regain brake function. they're open sided and just crimped around the hose when new and turn into very tight pinch off clamps when rusted between the hose and bracket.

[@MortskeRepair]

Thanks for the info!

[@johncarella1836]

Certain Van doors are worth some serious coin and good luck finding them too! Man that truck in the background looks so Cool!!!

[@MortskeRepair]

good to know! Sell you a set!

[@johncarella1836]

@@MortskeRepair lol! My buddy just scraped a van for a set! Camper van!

[@alanmoore78]

45:33 PBG shoutout 1000% approved, Dalton has vans that Boot (4x4), Scoot (454), and Boogie (bom chicka wah waaaoooh), also a never ending stream of Pontiacs that each one is worse than the last, but he still gets 'em up and going.

[@nathonsmithson3024]

look for the sheetmetal strap that holds the brake hose. they rust jack and squeeze the hose. a simple screw driver twist can open the strap up and bobs your uncle brakes unstuck.

[@timothymilam732]

You can use the exhaust manifolds, because all you have to do is put plugs in the smog holes after you put some heat on them to get them our. That's how we use to eliminate all that BS when we de smogged anything that didn't get headers. Those should flow better than even the rams horn manifolds did because of the larger outlets on them along with the longer tubes off the end exhaust ports without the sharp bends restrictions of regular cast iron manifolds. Since you're going to use the big ass blower on it you need all the flow out you can possibly get in order to tune it halfass correctly. Unless you install a huge top pulley, and choke it down to minimum capability, and I don't think that one will really go too low on CFM's anyways. I could be wrong, but I would check with the blower shop to see just how much they are capable of moving with the smallest pulley available, but then you still have the two 650 cfm holleys sitting on top that will have to be jetted down as small as you can and them not bog down. Unless you can make them into a two stage setup to where you only use one until WFO throttle is applied, but you'll probably kill the blower surge that's so f'in kool about blowers

[@MortskeRepair]

Thanks for the info!

[@rickpallamolla8390]

Those van columns work great for 67-72C10 pickups

[@MortskeRepair]

The earlier ones without the ignition switch on them are the ones you want.

[@pas-kv8ud]

“No walk around”. Proceeds to do a full walk around. lol. Love the channel! Look forward to Mondays.

[@MortskeRepair]

habits die hard

[@mitchrenee]

I personally like the longer videos; they are always the best time of the week.

[@MortskeRepair]

Good to know!

[@dombutler7685]

Thanks Mortske for the will it speed run! That's a yes to budget blower shenanigans!! After the fire at the Hydra Matic factory, GM made sure they had plenty of fire trucks at the factory, I know someone with one of them and the funny thing is that it's powered by a Chrysler industrial engine!

[@MortskeRepair]

Thanks for sharing! That's funny!

[@charleykeenan6171]

Great episode! I will be very curious to see how long that beast lasts with a blower on it. The idea of pitching it into an early Ford hot rod is AWESOME 👌.. Thanks for all the great tips and "useless" information!

[@MortskeRepair]

Brilliant! Our pleasure!

[@johnelliott7375]

Fire 🔥 at least, time for a Mortske Repair shop fuel system with a new fresh Quadrajet and she is a runner!

[@braydensdeals]

As someone who drives a 90’ BEAUVILLE I was entertained by this episode. Those rear doors are worth a pretty penny by the way, if there isn’t a bunch of non visible rust.

[@buckeyejim2989]

🗿💨 be careful stepping off that bobcat, don't let that Camara make you break your neck.. strip it to the shortblock and reassemble with bb oil pump and fresh chain n such. Thanks for sharing Mortske 👍✌️ unhealthy valve system will cause backfires, backfires will cause blower damage.. 🙏🧲

[@nickgeusebroek1210]

The way the engine was popping through carb on accel,I would be looking for flat lobes or disappearing ones on cam,they were bad in those years,valve train was noisey also,good indicator.

[@throttlebottle5906]

it's an old quadrabog/dog, it's guaranteed the accelerator pump hasn't worked at all in 25+ years and poorly for 30+. yeah, clearly I've worked on and rebuilt just a few of them(dozens upon dozens and many others, small engine to multi-carb racing cruft.). 🤣🤣

[@jimrobin98]

I like watching your video because you show just what can happen and only by trying different things (methods) is how you find out if they work or not! You have to try!👍👍👍! Everyone has their own opinion. I say go for it!!

[@MortskeRepair]

Right on!

[@johnelliott7375]

Really ready for the hopping up the great van. Cracking it out of the vehicle and and no converters someone else took care of the clogged ones. LOL 😆🤣

[@LeonardMagnusson]

in my defence, my brothers neighbor was my line boss. so no faking sick. but working weekends did keep me out of trouble somewhat.

[@buckshoth585]

That headliner waving behind you was majestic!

[@jobertvangool9961]

Really this was too much fun, seeing you wrestling the dog house! Thank you, I thought it was just me having to do that. Keep up the good work. 👍🏼👍🏼

[@MortskeRepair]

our pleasure!

[@gregstandridge856]

The Hydromatic originally came out in Olds in 1936 FYI. You need to take that 350 with the Blower and the turbo 400 and build a Rat Rod . With all good parts you have it could a wild one but I'm sure you don't like them😅

[@MegaRetr]

Really like your Mortske Minutes)))

[@MortskeRepair]

Glad you enjoy them!

[@michiganbushcraft975]

Thanks!

[@MortskeRepair]

Much appreciated!

[@SELFINDUSEDCHAOS]

most of vans from that era, had 4 bolt main bearings. my first choice when building a motor for my other projects

[@theofficialdiamondlou2418]

Now we’re talking!!!!! I want to do this with my 87’ van just for S&G’s. Lol.

[@MortskeRepair]

may as well!

[@user-KrackerJack]

I used those " factory headers" into 3' exhaust on my 327 solid lifter aluminum heads 750cfm holly approx 480hp they worked great and never leaked

[@MortskeRepair]

good to know!

[@caroled5734]

Hello love. Mama card probably watching this for the second time. I watch things on my phone or my iPad and then don’t remember which ones I’ve seen until I’m part of the way through them… But then figured I may as well watch the whole thing again because it boost your algorithm.

[@MortskeRepair]

Much appreciated

[@michaelowens772]

It takes real skill to get that top on the coffee can in a quick and efficient manner…..thanks Mortske!

[@larryfaglie7380]

Love watching these chevys bring tears to your eyes, hell yeah put a blower on it.

[@joelboxx]

One of the few channels without someone doing behind the scenes work.

[@nb7466]

I remember being younger and hearing. "this car hasn't ran in 30 years". I thought that was along time. I'm in my 30s now and wow. Has time flown

[@vicferrari9380]

No doubt! I realized I had the same issue. I put it outside for te shop space and kinda forgot them😢😂

[@MortskeRepair]

Time flies when you're having fun!

[@waltdenis9621]

As always a pleasure! Good job guys and always learn from your content!!

[@MortskeRepair]

Glad to hear it!

[@jodypierson3137]

I use vacuum caps as plugs in fuel lines and such, they work good too

[@scottnyc6572]

That was entertaining to watch and congrats on the record.

[@MortskeRepair]

Thanks so much!

[@LisaMedeiros-tr2lz]

Not the world record. Everyday I go out to the driveway and twist the key, and my will-it-starts take 500 mS.

[@8BitAtari]

Thank Jebus you're still here I thought for sure you were gonna lose the shop!!! 🇨🇦

[@MortskeRepair]

You and me both!

[@scottwilliams1976]

😂😂Chris Farley, what legend

[@MortskeRepair]

absolute legund!

[@johnelliott7375]

You could do it, but I don't see you taking the time to put it in the van and then hammering it in the engine bay! It would be the best build in a good while. I can't remember when I seen a OBS style Chevrolet van with a blower motor in it and you would have something that most people would not even think 🤔 about trying to do and drive it. Would be a show stopper.

[@EarlwithanE]

Hey Mortske!! I don't know if you will put a blower motor in it, but that thing sure does "BLOW" with all the windows down and the headliner swaying in the breeze 🤣🤣 Kinda feels like a Gypsy wagon....Upgrades to consider.....8-track, fridge, shag(ging) carpet, red solo cupholders, etc 😆😆😆

[@ksokie63]

Hey Mortske 👋, great video today. You can never have enough storage. Thanks for sharing, and have a great week ahead 👍

[@MortskeRepair]

Same to you!

[@richardbates2367]

You still want a rear bumper for the Casper or the bloozer truck that van bumper should bolt right on slightly different than the blazer.

[@jimrobin98]

Amen --I know how you feel! That is why I retired! Keep them coming and I'll watch them!