AD-1 Amp Dyno Taramps Big Boss Bass 8 Black by Jones Subwoofer Solutions JSS

AD-1 Amp Dyno Taramps Big Boss Bass 8 Black by Jones Subwoofer Solutions JSS
Manufacturer ratings:
4,800w RMS @4 Ohm
8,000w RMS @2 Ohm
8,000w RMS @1 Ohm
Dyno bank consists of
1x 135ah CMAX and a 205ah CMAX, no active charging.
Thank You For Watching!!!
Please LIKE, SUBSCRIBE, and hit the BELL, so you know when we post a new video!
See you next time!
------------------------------
Visit www.JonesSubwoo...!

[@willsteele9249]

Good to see you're back! Thanks for dyno video, Happy Father's Day to you (if you have kids) and all the fathers out there!

[@JaredElliott1]

Bought this amp to power two BlackBrick Brickhouse 12s. Does a great job!

[@ronniemiller7851]

Happy father's day to all the father's that watch this channel 🎉

[@daddy_shark82]

happy fathers day everyone

[@csj9619]

Started off not really liking Taramps, but I've had to revise my opinion, now that I know a bit more about 'em. Choosing the right one for how it's being used is crucial. For subs, SMART, SMARTBASS, BIG BOSS or MD are the ones to use.

[@christopherparis6841]

Go learn more you'll dislike once again promise as with many full bridge options. Far as I can say orion hcca 3kdsplx hit 13.8k half ohm dynamic 3 zero GA positive inputs and 3 zero GA negative inputs sick sick pitch rt there

[@LeonD519]

@reson8qwhich is really for mid drivers. Had one also myself.

[@LeonD519]

@@christopherparis6841yea they can’t touched the Orion.

[@LeonD519]

@reson8q damn, yea that’s a beast for sure, I don’t blame you at all

[@SoberBassHead]

Ohh yeah!!!! Waiting for them to come today. Can’t wait, thanks again.

[@laurantsmccloskey5927]

Love mine! I've been waiting for this dyno for awhile!!❤

[@user-vx5kb8cc1v]

When can you do a dyno on the bravo bass8k flex?

[@musikman337]

Can you please do the Sundown sia 3500D V2?!

[@Louisiana_CRX]

Perfect amp for my Funky Pup sub.....

[@zakndao]

That’s enough power to boost my arse to the moon😅

[@trentduncan60]

Thank u so much for this awesome review

[@TheMack23rd]

Based on what barevids said. Power cycle the amp. That's why its not going over 7500.

[@Facekicker]

I recall his testing now that you mention it, I might try a few things in the next week or so just to verify some behaviors I've found and I'll add power cycling into the mix.

[@jay_shipes]

💯

[@BARBELLS-AND-BUDS]

@@Facekicker I bought the in the white version a few months ago, but not used it . Any more testing or info would be awesome! Appreciate the video!

[@bullitmaget8193]

love my big boss 8k...might of been the first in the uk

[@JohnG1000]

But which amp performs the best for its ohm load ratings ? SMART 8K , SMART 8K BASS , or BIG BOSS 8K ? Lets see 👀 some votes 🗳 👇

[@Facekicker]

Bass or Boss Bass at 0.5 starting is generally speaking the best configuration for overall power

[@Brandencarroll1]

Do you think wiring for 0.5 is best for this amp vs. 1? I'm pretty torn on which subs to pick, looks like 1ohm is great for this amp​@@Facekicker

[@Facekicker]

@@Brandencarroll1 generally speaking, yes.

[@joshholden8561]

😮 what an amazing beast of an amplifier that is

[@RebursPsychology]

Powerhouse 💥

[@Chris-B-Bassin]

I would run this! 17k dynamic is crazy power 🤣

[@rubenavila8700]

U no you will never see dynamic in car audio u know that right

[@Chris-B-Bassin]

@rubenavila8700 ya...box rise is a beast lol 🤓

[@TheGodofSEO]

Damn what a powerhouse. 17k watts 😳😳😳😳😳

[@apocalypse4720]

You will never see that power. That is peak which happens very rarely. the uncertified is the ideal real world numbers.

[@TheGodofSEO]

@@apocalypse4720 noooooooo. Really? 😅

[@christopherparis6841]

Got a link to that test disc?

[@joshholden8561]

The current limiting feature on these amps limiting the wattage output is the only feature I don't like about them I feel like they would do much more power if they didn't have that feature

[@JohnG1000]

They did that so they won't blow up and catch fire when peoples electrical can't keep up

[@JasonWW2000]

I don't feel like you're understanding the advantages of current limiting. If a traditional amplifier gave you 7,400w at half ohm then it would probably only give 5,000w at 1 ohm, then 3000 at 2 ohm and maybe 1800 at 4 ohm. Which amp would you rather have? The current limiting feature gives you way more power at the higher ohm loads. Keep in mind they only built the internals to handle 8,000 watt continuous. This is how they keep the prices as low as possible.

[@joshholden8561]

@@JasonWW2000 I repair amps I do get what's going on with these amps those big boss 8 k amps I've seen the guts a see what fets taramps uses and that big boss 8k is almost a 15 k internals dialed way back I guess that will help the amp to last a really long time. Dialed back and they have good constant power circuit in them.

[@joshholden8561]

@@JohnG1000 no that's not the reason ppl are still gonna run bare minimum electrical and burn the amps up Wich is what was happening to taramps in the earlier years also using undersized power terminals on the amps didn't help either

[@BARBELLS-AND-BUDS]

@@JasonWW2000 Id rather have the Bog Boss 8 vs Wolfram 7500, and thats why its for sale and the Big Boss 8 is waiting to get a car to go into.

[@donjaun540]

Nice amp. Comes close to rated power.

[@lowhertzhighspl]

Bad a$$ video. Well done. Have video of Bass 8K at around 15+v at 0.5 ohm?

[@beemackin2316]

Great 1 indeed

[@shanesubashe787]

Good video! Lots of power!

[@tombizm]

test the zero flex 40k amp

[@Deviantsoundz]

I wonder if they are planning a 15k version.

[@Facekicker]

Man I hope

[@ronniemiller7851]

15,000 watts

[@darkxd8366]

Im running a 400amp alt and 2 lithiums. Do you think ill be fine lmao 🤣. Im running 1 cyber 6k limitless and 1 25ah limitless and agm as the starting battery 😬. Im a but scared

[@Facekicker]

Cutting it close imo

[@darkxd8366]

@@Facekicker i got the 8k and at full tilt i can still hang around 13.0 lowest I've dropped is 12.4 after bumping for like 20mins idle. its Definity a really good amp and sounds very clean too. but i wish i could push it harder the smart tech keeps it at 8k but my subs i feel can be louder

[@RyanBassForLife]

Nice amp

[@bubbawubba2307]

What are the dimensions and weight of this amp compared to the Taramps 12k?

[@Facekicker]

BB8 9.37" x 2.80" x 20.16" 16.4lbs MD12k 8.98" x 2.75" x 21.65" 17.5lbs

[@bubbawubba2307]

@@Facekicker so roughly the same amp in size and weight

[@Facekicker]

@@bubbawubba2307 ya really close

[@bubbawubba2307]

@@Facekicker Seems a fella should just buy the 12k since it's close to the same amp but regulated to put out 8k instead of 12k

[@Facekicker]

@@bubbawubba2307 there's perks to each

[@danniibluewhenlovenhatecol3208]

9:19 😮😮😮😮😮😮 seasmamon😮😮😮😮

[@johnstarks5323]

👍

[@pvgreen621]

Test the soundigital evox2 5000.1

[@TokenTombstone]

Nice dyno

[@10krms54]

I came across a burn twisted sounds 8.5k is there some one or a shop that will fix it.

[@Facekicker]

Try GS Amp Repair or Ellensburg Amp Repair

[@holeshotinspectionllc2412]

The amp lab🤙

[@apocalypse4720]

7600 watts for the price isn't too bad

[@gladboy7722]

👍👍👍...🍻🍻💯

[@administratorperson3272]

what Amper draw at 1ohm, .5ohm ?

[@evilinside5984]

@administratorperson3272- In this video, he showed, 1 Ohm= 710 amps, with 81% eff., and 1/2 ohm, was 755 amps, with 68% eff..

[@administratorperson3272]

ill refrase the question, what amp hr load is the 12kw and 17kw dynamic requirement?

[@evilinside5984]

@@administratorperson3272 - Depends on what type of battery chemistry, brand, and model/size of battery. Its up to you to research, he gave the amperage draw in the video, so you can see what a manufacturer recommends, for amp/hr. and alternator, as each could have a different answer. So its best to ask who you pick.

[@administratorperson3272]

@@evilinside5984 i no mention battery(s). i could probably guesstimate based upon the earlier given readings/values.

[@evilinside5984]

@@administratorperson3272 - I can only try to answer, based on what you type, not what you mean. Your prior comment says, "What amp hr load is the 12kw and 17kw dynamic requirement?" Batteries are rated in amp hr., so thats why i answered the way i did. I want to try to help you if i can, but please be more descriptive, thank you. Also when trying to figure out electrical requirements, its best to use the Largest draw. Like in your example 17kw. To support 17kw, you would need to be able to provide roughly 1,700 Amps of current, depending on actual efficiency. Hope this help's!?

[@yougod7253]

Hey Now

[@timnowlin1]

Thought be crazy numbers. Not yet anyways

[@robdingosaenz5556]

Cool video- just 2 long. Everybody understands how that AD1 works nowadays.. Those BB amps suk. Smart 3 does 5k.. Smart 5 does 6k . Smart 8 Will do 8.5k. .. best bang for $$$$

[@Mr.NpK143]

NOT IMPRESSED. Smart tech or not, bottom line this amp misses the mark without low voltage being an excuse. 😢 Although it'd be a great amp for burping, I couldn't say the same if you need a true 8k for daily

[@Facekicker]

I often see clamped numbers surpass what it does on the bench.

[@MRBassSlapper]

@@Facekicker these amps are not that impressive u can feel tht smart limiting bs kick in on music it gets quiet and starts to roll off u can feel it reduces its power at higher volumes i had the big boss 3k im sure the smart 8 would have been alittle better for more power but that 3k wasnt enough for a daily driver

[@Facekicker]

@@MRBassSlapper depends on configuration. Generally speaking, the smart tech maintains a higher average output than your standard amplifier. Repeated throttling would mean something isn't configured right.

[@MRBassSlapper]

@@Facekicker these amps are always going to do that i had one for a few weeks on solid electrical

[@holeshotinspectionllc2412]

Completely the opposite, the Smart technology kicks in on burps and throttles back hard, you will never see 17k on a burp. Sam from Barevids explains why the amp reads that on the dyno during the dynamic burst test. Don't be surprised to see 10k with proper voltage. Make sure you dont clip even slightly or the smart tech will kick in and really throttle back on burps . For demos, these amps are monsters because of the smart technology due to variances of impedance during fluctuating frequencies.🤙🔊

[@MRBassSlapper]

korean amps wired low vs this amp wired low korean amps shit on these all day that limiting smart bs is annoyin af when playing music

[@Facekicker]

There's situations I would use one or the other but wouldn't necessarily blanket one or the other as better

[@jptatts404]

Unimpressive to go with that infamous taramps crap sound quality.

[@jasonritzen1143]

Lmao. Check out the blind sound comparison between the Taramps and the JBL Crown.... Results were indistinguishable.

[@jptatts404]

@@jasonritzen1143 absolute 🗑 af. Didn't even make rated power at 15+ volts. 💩🗑

[@jasonritzen1143]

@@jptatts404 I saw that and was surprised, I have 3 Taramps amps hooked up currently (3000hd running mids and highs and a big boss smart 5k on 2 12 inch Orion HCCAs in one car and a big boss smart 3k on 2 alpine Type R s in my other). I will admit I've heard better sound quality for mids and highs, the HD is ok but for bass, I love the boss 3k and 5k, especially on a budget, theyre cheap enough you can throw the saved money on your amp and sink it into beefin electric or dynamat, or dsp, or sub enclosure .

[@eurekaakerue4649]

@@jptatts404👋😝❌ you Wee’Todded 💥👀It over doubled rated at .5 ohm Over 17k on burp idiot , 💯✅ + there’s a reason KOREAN are trying to copy & clone their boards , an are switching to full bridge ____ it’s more powerful & efficient PERIOD ‼️ Your Hate GAME is Weak as we just saw the Numbers at 14.7volts under load not 16volts which most will run it at TARAMPS is the build house - not like all those other cookie cutter Brands with same boards deferent packaging (( an Brazil 🇧🇷 is a free REPUBLIC from South America allies with the USA🇺🇸 not some communist country like North Korea & South China 🇨🇳 : Brazil actually likes the USA 🇺🇸 , not just wants its money 💰 like Korea & China 🇨🇳, ❌if you want their unregulated Amps get the regular Bass Line , or regular MD line which do rated at 12.5volts … the days of unreliability are over __ with their New stuff /// and you sound like an idiot if you’re gonna use the on board x-overs on any amp this POWERFUL - Really who does that with any competition amp *(( Full bridge & Half bridge refers to the Amp’s Power Supply , not its output stage - class “D” learn Something instead of Hate ✅❌

[@donjaun540]

I think at 1ohm it will hit it's highest peak.

[@lee28.78]

But a Ruthless Audio amp !!! These amps don't last !!! Ruthless for the WIN!!!!!

[@imfrom210texas]

These amps last just fine, with proper electrical, like any other full bridge amp

[@sammy-ko6bs]

Ruthless audi junk ?

[@JasonWW2000]

Careful. You're sounding like a spammer.

[@Facekicker]

I have a few Taramps approaching 10 years of use with no issues

[@BARBELLS-AND-BUDS]

@@Facekicker Ive heard the earlier models werent as reliable, mostly the other brands half bridge, but they have WAY more safety features now.

[@christopherparis6841]

Such a rip off get an hcca 3k it hits 13000 rms at half ohm smfh oh n its 650 bucks soooooo ya hcca or nothing

[@Facekicker]

@@christopherparis6841 I've never seen one make more than ~4k in the lanes, as the HCCA 3k is just a 5k. Nobody is getting 13k out of one.

[@danielknepper6884]

Big dummy d Williston audio I would love this amp but only if it had Tiffany style RCA's😅😅😅😅😅