Modifying a Broken 992 Turbo S...

Tried to take advantage of my time with the car by getting some stuff done! 90% of my ownership it's been sitting at the dealer, but hopefully she'll be back soon. LZMFG.com
Champion Motorsport - www.championmotorsport.com
Presidential Detailing - presidentialdetailing.net
Auto Paint Guard - www.autopaintguard.com
Also: dear people that keep asking why I'm calling it a 992 sometimes and 911 other times. 911 Turbo S is the model - like "M3" - where 992 is the generation - like "e46". I often got this when calling my GT3RS a "991.2" (which is the facelift version of the 991).

[@abdallahsharkawy7993]

Don’t loosen or tighten center lock wheels on the floor, always raise off the ground. Per Porsche instructions. -Porsche Technician

[@jackdaniel5716]

also never use a torque wrench as a breaker bar lol

[@simonfaulkner5821]

That was hard to watch. Those center locks ain’t cheap😬 and if they lock up it’s a real pain to get them unstuck.

[@SpencerRyllSmith]

@@jackdaniel5716 That hurt to watch

[@feelingzesty8677]

bump so he sees this

[@Emersonbmx16]

Commenting so it gets bumped up!

[@dento4134]

Adam - “I have back problems” *proceeds to take off wheels at ground level ON A LIFT* Love you Adam

[@dylanking1895]

Haha as I was watching my brain went “hmmm can’t figure out why my back hurts” in an Adam voice. I then find this comment like 3 down the list. Great minds...

[@kasper_429]

Good point, but also those stock wheels are hella expensive and it would suck financially to have them slip out of your hand at like 4 feet in the air and fall on their face. Just sayin'. Lol.

[@bretthaynes1921]

Beat me to it lol

[@nonlocals4987]

while only using his back to lift lol

[@parkd240]

to add to this, if adams reading, go to a massage therapist and get the muscles worked. and then work on strengthening your core. i had a weak core and bad back pain, now after working out my core almost everyday for even 10 minutes it’ll help the pain. leaning over a car to work on engine and car stuff strengthens the back, in a bad way

[@user-eg2dn6wn5k]

Adam the kind of guy to buy a daily for his daily and get a daily for that daily until the other daily is fixed

[@michaellane5739]

That’s adam to the T

[@BillyPerry]

love the murdered out spec for the 992, congrats Adam!

[@Cruvss]

Yaaaaa

[@callumburton1287]

Yeah same

[@machtschnell7452]

Yeah, so 2001.

[@TSSR93]

Adam is the type of guy to untorque his wheel nut with his SnapOn torque wrench

[@shona5512]

Pretty sure he knows you're not supposed to use it, but he used it because it was a long bar.

[@claytonhaynes7362]

This comment had me rolling.

[@zaceryhammond1144]

Meh I bet u he gets he’s shit calibrated often

[@guhfluh]

@@shona5512 Why is it designed to work in reverse if "you're not supposed to use it" in reverse?

[@hazdaz8578]

@@guhfluh So you can tighten left hand threaded things to spec, you never use a torque wrench to loosen things

[@cookingwithkyle1925]

love how adam doesnt make you wait another episode to put on the wheels

[@allspooledup2584]

Ya I hate that shit. Cough cough TJ hunt...

[@Phakepasco]

@@allspooledup2584 yeah I stopped watching him a couple years back cause of that he changed with the money too

[@robertarrington4675]

@@allspooledup2584 I was going to say the same thing

[@CJ-rh1xv]

This would of been 5 videos for any other youtube. . Collecting my new car . First drive in my new car . Putting wheels on my new car . Ppf for my new car . New car is broken

[@ardifadelpratama]

@@CJ-rh1xv lol

[@lukas19804]

Hey Adam, i work at Porsche in Germanny. When you want to get the wheels of and on you need to be carefull with some things. This is how Porsche wants it to be done: 1. Dont losen or tighten the centrelock on the ground. Get someone in the car, pull the ebrake und step on the brake. Then losen in the air. 2.Tighten the wheels in the air too. The same way but when they are all at 600nm you need to loosen them again 90 degree and then thighten to 600nm. This is so they seed well this is how porsche wants it and how we all do it in the shop Hopefully you see this and it helps you XD Lukas

[@Are_Pee_Gee]

This helped me, too! TY!

[@Buoyboii]

21:51 tint went from 50% to 5% when mike rotated his lens filter lol

[@DirtyD07]

It's called circular polarizing

[@sfalk2640]

you mean 5% to 50%?

[@Buoyboii]

@@sfalk2640 the percentage is the amount of light that passes through the tint, 5 is much darker than 50

[@kawi-boii]

I’m glad I’m not the only one that noticed

[@MonicaHolly143]

It doesn't go darker The lens has polarizer that cut the reflection of the lights It is use full for car photography or anything that will reflect light It is also use in fisherman's sun glasses to see fish easier in the water without the reflection

[@nolansmith5133]

“You are missing a chandelier” 😂

[@ttaylor8830]

Shit made me chuckle😂

[@peytonstw]

Came to comment this, you beat me to it 😂😂

[@tofadeisastart]

The front brakes on that Porsche are insane. Can’t stop staring at them

[@shona5512]

Dude Porsche brakes are fucking HUGE! I was parked next to a Taycan Turbo S today, and the first thing that caught my eye were the calipers on the carbon ceramic brakes. You look at them and think, _"damn, they opted for the Airbus A380 brake package"_

[@JosephNnbs]

I’d love to do a carbon brake conversion on my truck lol. Like zr1 brakes

[@yelruta]

@@JosephNnbs I'm gonna go ahead and say you'd probably love them until you had to replace them. Even aftermarket solutions are thousands of dollars. Plus on a truck they wouldn't be much more effective than steel rotors bc you'd struggle to keep temp in them.

[@bartenvancasand8096]

Brakes? I only see big circle mirrors behind the wheels

[@JosephNnbs]

@@yelruta oh know, lotta speed in a 5500lb truck, that temp will be 👌👌 😂 Last price I got was about 700-900 per caliper for a zr1 and the rotors were about a grand each. Pads were about 400-500 each but just imagine the flex haha

[@calebpechumer2030]

I’m a technician at Porsche and see these cars every day, but I still get goose bumps when I see video of your car. Absolutely gorgeous spec.

[@eel1331]

We need to appreciate mike's "you're missing a chandelier" joke more lmao

[@ffphala897]

Crsly😂😂😂😂✅✅was waiting for this comment

[@adamfrancischiello]

When he said financial comments I knew he took it personal cause you know he isn’t dumb with money and doesn’t want to act like he’s flexing

[@zaceryhammond1144]

Our yearly play cash is he’s dayly play cash let’s be honest

[@OllamhDrab]

(Well, the thought did cross my mind but I figured it made sense, whatever the equation is.)

[@jakedean8560]

@@zaceryhammond1144 How does he make so much money though. Surely yt can't pay him thaaat much

[@Zqud]

@@jakedean8560 Investments, Business, plenty of things

[@zaceryhammond1144]

@@jakedean8560 sponsors the March ...

[@huckhuckhuck]

You and Collette should build a Ultima RS together. With all the spare motors laying around and all the potential sponsors i think it would be a dope collab build for both of your channels and then you can track the car together.

[@ROBERTS604]

Bingo, best comment I've read in a while...

[@georgelane1377]

Doesn't sound like his style but yes that would be cool

[@rafaelforno]

I love the way he’s straightforward and doesn’t waste time to deliver what we want from his videos. I’m happy for that! Well done 👍

[@NickBerte402]

The b-roll of the turbo S after the ppf treatment literally doesn’t even look real. It looks like something from forza. WELL DONE MIKE!

[@Whatshouldicallit660]

His work is so crazy!

[@joshtong7332]

if only we could watch in 4k

[@falosny]

I think that's a compliment to both, Forza and Mike.

[@JaceCrozon]

it made me realize how dusty my monitor is

[@AnthonySvt_]

Can’t wait for the FD Season/Content!!!

[@dougzo9190]

@Lewis zerella what? he was just saying he was excited to watch the new season..

[@AnthonySvt_]

@Lewis zerella how am I flaunting my wealth?

[@Chocolate_dragon]

I am super excited. The little skills battle video has me hyped alreafy

[@jonatan_1325]

@@fma1468 if you don’t like them doesn’t mean that he is doing a bad job

[@jonatan_1325]

Can’t wait man

[@Nick210]

Thanks for not straying too far from the oem style. Very classy my guy.

[@Chattsteezy]

OEM/OEM+ is always de way

[@MX304]

Adam in the first 992 video: I love the way this thing shifts 2nd video: Yeah, about that...

[@jackhopgood1646]

Serious props to mike for always making these vidoes so pleasing to watch, the cinematics are so satisfying

[@sampurnell2401]

I Thought I was tripping when Adam pulled the 992 out of the old shop

[@rkf91]

Adam: "My back hurts" Also Adam: 0:45

[@josevela1130]

😭😭

[@jonatan_1325]

Lmao😂😂

[@nx_Exe]

let's be real center lock wheels are for racecars so theyre super light.

[@ajr5195]

That polarized filter spin at 21:56. Hiring a professional to film content is what every top tier channel should do. Great work Adam and photographer/videographer 👍👍👍

[@davidgutierrez1729]

Your content has continued to improve since day one, congrats on all your success and cars!!

[@EthanDove]

Your videos got me into cars bro been watching you since you only had your 240 and 335

[@kxdirtjumper]

Amazing the difference between a new paint job and paint corrected and filmed. That car looks sick!!

[@CR-kr9cs]

Seriously, the day I buy a new car for the first time I’m going to get it corrected and protected lol.

[@t-rob576]

We gotta see a bmx bike on that roof rack young Adam would be so proud

[@markturner4336]

Congrats again bro !!! We all love and support you 💯!

[@jaydanmcqueen7]

So glad you kept the clear tails over the red ones 🥵😍

[@allspooledup2584]

Damn man, the black 992 just looks so damn good 👌🏼. I love the lava orange on your GT3, but the black just hits different

[@LCTRgames]

Adam: "I'm going black car, black wheels" Mike: "Welp, gonna have to over-expose all the backgrounds for the foreseeable future then"

[@johnhornbrook4975]

Mike your Camera skills are insane. Mad props capturing the color of the turbo s and just overall mad skills.

[@hermn2593]

Been watching Adam for a looonnngggg time & I love how original he is. He has not changed one bit. 😎😎😎

[@colegiesbrecht1793]

he changed

[@Chattsteezy]

@@colegiesbrecht1793 he grew up and isn’t a 19 year old kid making BMX vids anymore

[@connorb9097]

Trusting Adam to have the first broken Turbo S 😂 Can’t wait for the Smokies Video! That preview at the end has me 🤤

[@ChongolioPR]

Same, thath sounds like glory

[@lordnavee8995]

Adam been watching for7 years and I enjoy all your videos

[@RishMedia]

One day I’ll have a dope rwd project and just keep leveling up, seeing all the progression with you has been awesome! 🙏🏻🔥

[@eel1331]

Thank you for long videos, helps my boredom because I have no life :)

[@fran2427]

I always look forward to watching your vid Adam your such a Huge inspiration to me !🔥

[@rhysconlay9187]

Simp

[@joeladzim1225]

💀

[@manozionadoz8978]

I’m impressed how well mike can get any imperfections in camera I know those are so hard to get in camera.

[@AGNdogg97]

My boy Billy, repping the handshake, I love it!

[@briangray9118]

So glad Collete didn’t waste her money on a type R and got a TTRS instead 💪🏼🙏

[@SorryHR]

When the outro was like "WHEN YOU SAID" nothing but pure joy

[@coreyemanuele4643]

Hey man. I know editing video can be tough..and I know youre busy but thanks for giving Mike some time off. Youre the kind of boss we all need.

[@ianoblen8900]

Worked for Gtechniq out of their North Georgia distributorship Warehouse. Love the product and definitely recommend it.

[@Smoke_Club_666]

Adam be like: I've been having back issues. Also adam: Hunched tf over to change his wheels. Squat down homie

[@granttfrederick]

“I wanted to go as dark as i could so if i’m picking my nose next to a car they can’t tell” 😂

[@real-talk_5304]

That is a beautiful car sir. Looking forward to hearing the exhaust upgrades

[@NotJo4Ever13]

Gorgeous car Adam. Despite the fact that the car was broken, most of the video was really relaxing and nice to watch.

[@jacobfowler8795]

Adam needs to complete the Porsche collection with a classic. RWB 964 maybe? :O

[@carenthusiastlifestyle2950]

YES HE NEEDS A RWB, I wanna see it being built real bad

[@mattleechee3645]

He hates rivets....

[@matthewfield7028]

Would be dope to see but he definitely doesnt have the patience to wait for one of them and they get built in Cali so not much content on it to make the money back.

[@calebpechumer2030]

RWB cars are big ghey

[@darnizzle8805]

Singer

[@alanloyd7164]

The "pamanara" bit at the end killed me 💀

[@itmebakadesu]

17:10 I had a similar issue on my STI with overheating while stationary. Fixed it with a high flow thermostat to allow for more cooling. Just added a couple more holes to the thermostat to allow for it. Worked like a charm.

[@rajr4034]

I always like this guy on KZbin ! Very humble shop owner.

[@handtuned]

Been looking at alot of the financial comments, hopefully you see them as people wanting to make sure you're not financially destroying yourself rather than negativity

[@thescout4313]

The poors always like to comment like he gives AF

[@ToStompU]

talking your girl into this car at the 15:00 mark has me so weak lmao

[@MH-pe8wj]

Bro you don't gotta explain yourself. Happy for you man!! Glad it worked out

[@KnightmareFrame92]

Man that ain't bad at all, you made it sounds like the car was boned hard in the last video lol. Glad its getting fixed up and can't wait to see more of it!

[@caseybever]

Adam edit and no double clip!!!! WTF man, its part of the lore around here.

[@jasonsepulveda1444]

the porsche looks so spicy its hella clean just like that

[@annabanna666]

Adam you really are one high class balling boy racer these days dude well done man

[@mrpasciak92]

Looks great! Applying film to the headlights is easiest when they are out of the vehicle.

[@RodLeland]

“You’re missing a chandelier” 😂

[@QuesoDipp]

Torque wrench to unbolt the wheels is the real flex in this video.

[@flybikesallday]

It’s the dumbest thing in this video. Torque wrenches aren’t supposed to be used to loosen things. Wears them out.

[@JedemPoKucama]

@@flybikesallday That's why it's a flex you muffin

[@johnycricket8743]

I was not digging the wheels out of the box but damn they look good when they're on!

[@isaacnewton3498]

Adam I have that exact car. Mine's black on black on black. You just gave me some excellent ideas about how to wrap it. That looks so damn good keep it up bro

[@morganhartman1508]

god that blue 32 is incredible 🤩

[@sendjamin]

You said what we were all thinking ⚡️❤️👍🏼🔥

[@tadejpus2188]

Adam: Why does my back hurt?! Adam getting wheels off the car look like a letter S haha

[@MechetheGoat]

For real adam. This car bruh. One of my fav aside from the gt350 mustang. Absolute beaut.

[@DrippyBuild]

Can we appreciate the camera quality ! U can’t miss a spec on that car. 🔥🔥🔥

[@chrissterling8218]

Need more evo content!!!

[@chukkalow4]

A video of the previous owner of the compound showing the whole place with the old cars and house. Did anyone else get that video recommendation?

[@terrellnaidoo8488]

Name of the video?

[@5.0Faithy]

Yes

[@JohnDoeC78]

South40 rep

[@jamesnewman1597]

Always undo and torque centre locks in the air!!!! Very important Porsche instructions. Torque specs for centre lock wheels is 600nm. This has been drilled into my head over my main dealer apprenticeship.

[@jackb1000]

I really wanted to see you driving up in the Smokies. I just have memories of that and I was in a 2013 Miata. I guess I'll get over it.

[@marloncoetzee7734]

Seeeeeeeeesh love from south Africa 💥🇿🇦🇿🇦

[@deanshiller2788]

Fellow SA Fan 8)

[@craigdavids592]

Same👌

[@jeandreputter1758]

Aweee another SA fan

[@immortal_morty1347]

Hos

[@jeandreputter1758]

This man living the life hmm 😍

[@KooterTaters24]

Adam: “they break these cars in from the factory, you don’t need to break them in” Also Adam: “so I think we have the first broken 992 Turbo S” -obviously I don’t think they correlate, just found it funny.😂

[@fredbanda5494]

Love the new wheels and that boy is shinning 🤙🏾

[@eloidumont2573]

You should look at cups for your coilovers, I am imagine you have an idea of what it is but it’s really good. Love your vids keep it up!

[@BigKeke]

No wonder you back is so messed up man, watching you take the wheels of the Porsche had me feeling sore 😭

[@fastfarari]

You know you made it when you consider a 911 as a casual daily

[@66reaperecho92]

Beautiful car brother, I can’t wait to order mine next year. The spec is perfect, definitely opting for the carbon roof and the wing delete. Congratulations...enjoy!!!!!

[@tahoejuju]

If I could like this video twice I would. Such a beautiful car. That moment you reveal after the clear wrap is on though..🙌

[@lnd6273]

Next Porsche vid "i bought a 918 ... Saying goodbye to the compound"

[@trilliedon8728]

Lol i let curbs remove the nibs off my tires 😂😄

[@rubenpereira132]

🤣🤣🤣

[@CostaDoinBusiness]

That car though . Wow. Love the mix of cars on this channel.

[@dewamahardikadwijanatha9207]

Perfect setup, full black with the yellow

[@wes3527]

Am I the only person who liked the stock wheels better?

[@davidmarquez3010]

You are not alone

[@joshuaelliot2020]

Ffs got to be up in 6 hours 🤦‍♂️😂

[@donaldmokgale3123]

dope video as always Adam!

[@brianpyle3696]

Such a badass car! Congrats man you work hard for your toys.

[@dinosaur7616]

TSX gang?👀

[@Natashacivic2]

K24a2 ganggg

[@jamaicanlovrboy]

that man LZ always looking like he is running a marathon with his shiny forehead

[@SaturdayWinter]

FL hot and humid af bruh

[@SovietAssault69]

I love basically every video that Adam puts out. Every so called "flex" has been an interesting decision for content purposes. The Turbo S feels like his first real flex to me, and I don't really care for it.

[@bneexotics2120]

Love this rig ! Keen to see what he does to it 👊😎

[@sleepycb7]

The cringe factor of adam using a torque wrench to break the center lock nut loose 😐🙄

[@samuelvazquez7018]

I was searching for this comment!

[@michaellewis5699]

@@samuelvazquez7018 hahahaah i was also looking to see if anyone else noticed

[@sleepycb7]

@@samuelvazquez7018 im still cringing 🤣🤣 i had to go reassure my own snap on torque wrench that I would never do that to her 🤣🤣🤣

[@Matty.Hill_87]

With the center locks make sure to look after the locking pin in the center of the hub, if it sticks they've been known to loosen and fall off

[@hilandhsc]

Dam as soon as you get the tint done that is just gonna be the icing on the cake. That is one badass Porsche. 💪🏽💪🏽

[@richardcameron5699]

Everyone needs a break every now and then...no need to explain. Good luck at Fd!

[@jlaw346]

That was a subtle flex moving from the new garage to the old one

[@tvbybradon1338]

Soooooo sick!! Congrats on the car ❤️

[@zekeisme1]

that completely changed the car for me. those wheels are sick

[@jimmybarber3867]

Those rims look so good on the car