It's Worse Than I Thought...

I was changing the oil when I found a little surprise... I knew the SR was pretty unhealthy, but I think I underestimated the extent. Let's see how she holds up tomorrow!
LZBMX.com
s13 Nissan 240sx sr20det gtx2863r

[@JasonRothman]

U should put a foam mat over that tree where everyone was trying to 450

[@cucumba7522]

Jason Rothman Yes evrybody like so he will see!! :)

[@peggy-jodahammer6011]

Jason Rothman I hope so because I don't want to see anyone get hurt😢

[@JamesFinniganStn]

I hope not because i want to see everyone get hurt

[@erickh380]

James Finnigan same

[@TeeOG]

3:17 "....Who put this tree here?"

[@ricknoah9184]

Adam...please use a torque wrench on your lug nuts. Impact wrenches are notorious for getting the nuts on way too tight. Drifting is hell on lug nuts so it's very important that they be tightened correctly. Too tight breaks them off. You'll see.

[@AdamLZ]

+Rick Noah just because I don't show something on camera doesn't mean I don't do it afterwards!

[@MeyzaMusic]

Adam LZ smart ass Adam 😆😂

[@3mmhandle]

that's not the point, the impact wrench will overtorque and even if you go back with a proper torque wrench they're already overtorqued.

[@caibentley5772]

Rick Noah

[@brianpardee1281]

if youre not using a 1in drive impact youll be fine. if youre using a big milwaukie impact just dont sit there and rattle on it for ever a couple seconds of uggg ugga will do it fine

[@Boywiththemitsu]

All these people care about is being "first" it's 2017 people. Please enjoy the videos instead of saying your first. 👎

[@critJones]

If saying "first" makes them happy then so be it. It's 2017, quit trying to push your opinions onto others xD

[@ixblizzard8913]

Nitro 95 he should put some padding on the tree

[@nutella.6403]

first

[@dany78945]

Nitro 95 you must be new here

[@joshcooper6157]

Nitro 95 I

[@Milesjohnsonn]

I woke up got out of bed and pulled a muscle

[@MIXE538]

Miles Johnson Just go back to bed dude, write off today start again tomorrow

[@ColeT_43]

Miles Johnson ouch

[@olliesmith3244]

Miles Johnson unlucky

[@sekusihan]

Miles Johnson that happened to me but in my neck

[@8019shane]

Miles Johnson same

[@mr.polski5522]

Adam tip the oil container side ways so it comes out smoothly instead of it coming out alot and then a little bi

[@jbat0845]

SlyGamingHD I noticed the same, but wanted to point out that those containers are designed to pour with the opening up. that let's it pour without gurgling. just fyi

[@xsduprwd3937]

SlyGamingHD - Agree, Adam probably does it like that off camera... hah

[@AdamLZ]

funny enough I do :)

[@xsduprwd3937]

Adam- twice in a week you have replied to a comment iv made. this time I genuinely laughed. you're a good dude bro. I will be watching to make sure you lay it on the side next time...

[@mr.polski5522]

Adam LZ thx for the reply man you have just made my day!

[@NMartin3]

remember to put heat shield for your master cylinder

[@TheSkrillexRemix]

You're still bothering with that shitty SR20 just 2jzgte swap already

[@extinct5563]

Tbone Scriv it's being built it takes time

[@matixd22]

Tbone Scriv he is getting it, genius

[@aidanevo]

Tbone Scriv Yeah just put the bare block in it'll run mint

[@matixd22]

ahahahah deadd

[@JayJVee]

Lol shitty sr20? What do you drive a honda?

[@The93Nats]

"who put this tree here?" made my evening

[@ridgey70]

Quote of the video"Who put this tree here"😂😂

[@SimpleSpeed]

Hey Adam, I've been a long time fan and I've always loved watching KZbin vloggers and wanted to start myself, so I did and so far it's going great! I'm just over 2k subs and it's a dream so far! 😁

[@squidwardshouse67]

Is it a dream bro? Is it really?

[@oHobbsGFX]

Squidward's House so savage lmao

[@isaiahcp]

I've been watching your videos for a few months and just realized i live like 5 min away from you anyway you're a great inspiration keep up the good work

[@whiteout628]

I've definitely been enjoying the daily videos, and definitely been enjoying seeing you get to ride everyday with everyone on the new ramp. I'm an automotive technician, mechanic, whathaveyou, and I've actually never heard of the sandpaper trick to get oil filters off, but I like it! Here's a trick for you. Take one of your old quart oil containers and cut the it in half so you have a top and a bottom. Throw away/recycle the bottom, and boom, you have the best funnel I have ever used. It usually stands up pretty well by itself so you don't have to hold it while you are pouring, and it doesn't back up or slow down the oil when you are pouring. The threads on the top from the cap actually help the oil go down faster.

[@sandra3153]

Why don't you get a white board in ur garage for ur cars (to remember what todo and a list todo

[@FrenchGrinchOG]

FaZe up!

[@FrenchGrinchOG]

Lol

[@redteku]

"FaZe Down" -n0thing

[@jackfuetterer5126]

THAT FOREHEAD THO

[@mrmr.assassin1019]

Adam B you're not phase

[@gunnersmart9548]

Adam B Ha. GAAYYYYYYYY

[@MrGrizzlyy]

see, the reason why i love your videos so much is because i dont really know shit about cars but watching your videos and taylors videos really helps me learn more about the car community and such :) thanks

[@V10NYC]

Hey I've been a long time fan and I've always loved watching car youtubers like you and wanted to start myself, and so I did, I'm using an iPhone right now but have gained 30 subs and over 1000 views in the last 3 weeks. Thanks for the motivation!!!

[@Jack5HD]

Adam LZ is a legend great youtuber 👀🔥👌

[@Almighty_cornholio]

I just put an isr exhaust on my miata...hehe I can fist my car now

[@bogart.187]

Hehe it probably sounds like shit

[@phillipkyyle]

lmfao

[@Connor-bq2xo]

Extra Creamy David? lol

[@JohnnyJello]

"Who put this tree here!?" LMAO I lost it on that one! - Johnny Jello

[@mvkexplores5877]

Sweet video, again. I love the super regular uploads. When pouring your new oil into the engine if you hold the bottle on its side you can make it pour more smoothly. It helps reduce spills.

[@roketbunyy2165]

Adam you should probably put some type of padding around the tree so no one gets seriously hurt

[@ohnoAddz]

adam needs to quick sell his 240

[@matixd22]

Addz why

[@TheBlackHawaiian808]

Addz I can't believe you just said that! The disrespect 😂

[@sekusihan]

Addz he got a 2j to put inside it

[@ohnoAddz]

Toxic _Nitrous i know but no matter what engine he has he always has problems with his car and i feel bad for him

[@TheBlackHawaiian808]

Don't feel bad, it's just 240 problems🤙🏾

[@mikedorgan6947]

Adam I don't know if you'll see this but just trying stupid stuff hasn't failed me yet so ya thanks for uploading a vids I've been really sad lately because my girl friend just dumped me and I have not been able to find away to make this day get better so just having to watch how happy you are has really helped me get away from the horrors of life for a little so thank you

[@Budmaker420]

Hey Adam a trick when pouring oil into your motor. Flip the Bottle 180 degrees. Have the whole of the bottle on top when pouring. you wont get that chug when pouring it. Hope you read this it will help you keep your nice garage clean!!

[@oghlw47]

Adam, you should try an e36 project some time.

[@jacobwaltonpb5932]

Adam with short hair looks pretty bad :/ I literally thought last video "His hair's looking sick right now, hope he doesn't cut it"

[@sythfate7523]

Legit just finished watching yesterday's video and then I refreshed your channel and today's video was there lol

[@JamieHyndman]

hello from the UK. literally love getting the notification everyday that you've uploaded. been Subscribed for ages now, watched every video twice 😂😂 my girlfriend is now hooked on your videos haha. keep doing what your doing bro and hope Nicole feels better soon. love you guys

[@michealcaboose8104]

Please wrap the tree with padding and put some padding around the outside

[@lanceweeks]

i always hit the like button

[@lanceweeks]

k

[@Typef1pvp]

Can we get mad likes for Rob for doing so many attempts and not giving up!!!

[@lilcaesa]

thanks for the daily uploads

[@mr.polski5522]

Notification squad were are u

[@dizb7313]

pour the oil sideways it doesn't bubble up

[@skater7207]

Keep the videos coming we won't be to mad over one day without a video I jus kno it makes my day better seeing you having fun with life An your girl in all the videos An friends to your the man Adam shred on bro!!!!

[@Michielrf]

Heyy adam! Quick tip, turn the bottle of oil when filling up. Do it so that the opening is at the top. It helps to get air in the bottle so it doesn't gush out as much but is more controlled. 👌🏻 love your channel. Keep it up!

[@Sweet9964]

that tree is going to hurt/kill someone

[@zuze9112]

Who put this tree here ? :D :D :D

[@GladiarOfDestruction]

I knew he was going to say that when I saw that tree when they started doing 450's XD

[@gunnersgarage4522]

You're doing great Adam! much love

[@RyanDucheneFilms]

Anyone else crackin up at the compilation of Rob falling from the 450's LOL

[@icombs17]

Who put this tree here.

[@bdadsmagee]

i want more 240 stuff not skatepark stuff

[@blackngold1995]

Hoopties Limited his channel is based on bmx...

[@TeqHDcasper]

Hoopties Limited Well, He is filming what he does in his life, And he doesnt drive/work on the 240 everyday. And he wants to other stuff than that.

[@shaunclifton3741]

He's a pro BMX rider!! He rides for Stranger!!

[@broonanaclan2514]

Adam, i love your videos man. They are the best thing, and the only reason i got a bmx and not a scooter. I had been riding scooters for a few years and quite liked riding them. Then, one day i stumbled upon one of your videos, i kept watching and watching. And watching. I thought "stuff it, im gonna get a bmx instead of a scooter." I only just started riding and im loving it already. I hope that one day i will be half as good as you man, your my inspiration. Keep up the good work man, keep the vids pumpin, lov ya man. Peace

[@Nickcbiggs1997]

Hey Adam don't know if you heard of doing this but for me it really helps, poring oil without a funnel if you put two fingers over the top of the oil bottle when it's open it helps when you start

[@isaacponce1457]

say I to me in your next Video Please dude

[@heywhoeveryouare]

Grow out your hair longer adam

[@gordongoodman7446]

Hey Adam! When pouring the oil into the car turn the bottle around so that the opening is up at the top, it makes the oil pour out smoothly and it flows out instead of having an unsteady stream! Its also easier to pour and less likely to spill! Have fun drifting!

[@kyleball4004]

Hey Adam at 5:45 in your video if you pour with the angle side down. it won't burp like it was and less of a mess. It lets the air flow one of the reasons the container is made like that. Love the videos keep up the good work

[@GuilhermeSantos-qr5gf]

99% of people won't see this comment but the 1% that do I hope you have a great day

[@fadedchannel288]

keep the streak going adam ! i'm hyped about it

[@ZENJOYSHORTs]

dont give up we love daily uploads!!

[@ChaseMyles]

3:17 "Who put this tree here" Fucking killed me hahahaha

[@lorenzo4476]

Adam I really love watching your videos.

[@TheKoza147]

Your videos are always good no matter what, keep it up

[@TheMike2436]

Adam when your filling up your oil you can just flip the quart container upside down in the fill hole. The containers are designed that it wont flow out to quickly so you are able to do this. At least I am able to when I do an oil change on my truck.

[@SlightlyM3ntal]

Hold the oil bottles horizontal when you pour, helps reduce the "glug, glug" as it's coming out of the bottle and I make much less of a mess pouring that way without a funnel.

[@StenBuilt]

Keep up the streak, Adam!

[@dotheymakethatformen]

Hey Adam, long time fan of your car content. Hella makes these conversion headlights that use far superior optics and bulbs than the sealed beams you're using. I put them on my old 91 Toyota Pickup, and the light output is night and day different to stock! The ones you want are Hella E-code H6054 Conversion Headlights. The replaceable bulbs plug in to your stock harness, and you can run higher wattage bulbs if you beef up the wiring. Worth every penny of the couple hundred they go for.

[@AdrenalineJunky17]

Adam hold the oil bottle with a flat side down and it pour smoothly. I never use a funnel due to the fact that the oil doesn't "glug" when pouring that way. I use VR1 oil in my LS motors and they love it.

[@DevoDunbarplsrsplnd]

good stuff man! decent setup with the hoist in the garage.

[@anonymouscommenter6419]

I second that Adam ! As a mountain biker riding everyday with one day off a week is tough on the body . That's why I take the one day or two days off a week

[@liamtobey2936]

Hey adam, Next time you pour oil, flip the bottle the other way so the spout is at the top. That way it won't chug and have the oil he un predictable and get all over your engine 👍keep up the awesome videos, man!

[@joemarchione97]

I LOVE all the keyboard technicians on Adam's videos. CTFU!

[@bartgorissen6352]

Its good that you broke the combo, just because you need to do whats right for you. Also, if you pour something like new oil, tilt the canister sideways so that the flat sides are top and bottom when pouring. This way the air gets into the canister gets in a even flow and you don't get the gulps

[@JONESRACING345]

Hey Adam lz I love your videos of your backyard sessions!!!!do more!!!you should add huge lights around it so you can ride at night!!

[@xzempt_nz9180]

Dude you started spitting rhymes @7:01 😏🔥🔥🔥

[@yourdadhatesme8954]

Hey Adam if u pour the oil with the front facing down so the bottle is side ways it pours much smoother

[@erichurley8211]

Can't wait to see the event keep up the hard work

[@ErikGrimsmo]

Turning the oil bottle on its side to pour makes it sooo much easier to pour without spilling. Same goes for coolant and windshield washer fluid too. Hope this helps keep your next drive less stinky!

[@904moonshine1]

Adam you slayed it in Green Cove today! been following ya way back bmxing but you were doing work!

[@Kraetorz]

Adam, when you pour oil in 1 quart bottles like that, flip it around so the opening is on the top. It won't glub/burp that way when pouring and makes it 100x easier! Sincerely, an auto tech.

[@PeterBoy32DunnPeter]

Thanks Adam for another video

[@speedracer76]

A trick to help make less of a mess when pouring oil without a funnel. Pour with the neck to the top not the bottom. This will allow air to enter smoothly as the oil comes out and gurgle and splash the oil out.

[@scoobygms210]

I hit liked cus I appreciate these vids u have become my fav youtuber and I don't even like drifting or BMx lol keep up the good work and don't stress yourself out over uploads ! Quality over quantity

[@joss5238]

Happy u are riding more and with Burt miss them videos

[@flyingscalpel7]

Good luck at the event this afternoon Adam!

[@KantstandlamGarage]

Christmas Tree still flexin! 🎄

[@walmartcustomerservice]

gratz on 1.4 mil

[@brandonsimmons4431]

Hey Adam, If you hold the oil bottle the other way when you pour it(with the opening on the top) it is easier to pour. It wont chug as much and you will get a more even flow.

[@JoseTorres-chokolateblanco]

Turn the bottle around where the opening is on the top. The angle in the bottle helps you get closer to the motor and the oil moves out of the bottle at a slow pace so you don't spill oil everywhere and make a mess.

[@hypemilez5550]

When pouring the oil hold the bottle the other way round so the sloped bit is facing downwards. It prevents the blobs coming out it's much smoother🤙

[@sdcmgVEVO]

@Adam LZ, if you hold the oil bottle on the side you don't get the oil jumping out when its pouring as the air tries to escape.

[@5280_Offroad]

"who put this tree here " haha Bert got me dead😂😂😂

[@clubmeringue]

Just watched your podcast appearance on no jumper with Tanner Fox. Not usually one for podcasts but I enjoyed the entire thing :)

[@03tiburonproject61]

big fan of your videos I started looking into getting a 240sx I use to have a 180sx

[@AndyET]

Adam pro tip for pouring oil or any fluid at an awkward angle or distance. Don't be tempted to pour it with the bottle how you do in the video, lay it flat, that way you won't get that glugging that always ends up going everywhere, instead you get a nice smooth pour.

[@cossiedrifter]

Filling oil works better if you tilt the jug on it's side. Helps the air get in over the oil so it flows smoother :)

[@FloridaFX]

Adam, just a quick tip: When pouring the quarts of oil, have the bottle upside down than the way you had it at 5:47. It lets the air travel to the top so it doesn't go glub glub glub, it pours smoothly. just a tip!

[@dirtyspeed6163]

Hey Adam just a tip when pouring your oil try flipping the container to have the flat side in the air pours easier

[@JlavizLA]

I hate to see the sr20 leave but so excited to see the 2jz Inside the 240sx after seeing thatdudeinblue 240

[@theguru-s2l]

adam, im sure you wont read this, but if you do, if you engine has that much shavings in it, i would try the following, drain old oil, place sump plug back in, then with the old oil filter in place, fill up the oil system with diesel fuel to the max mark on your dipstick(the engines dipstick), then start the engine up, and let it idle for a while, just a couple of minutes, the drain the diesel, and remove the filter. this helps to flush out most of the junk in the oil system, then continue with your oil change as usual.

[@smokeymedia7623]

at least you made a video today so good job you r a greatest KZbinr ever

[@masterlorden3075]

3:18 "Who put this tree here?" Completely LMFAO.

[@mattcloke2923]

I think your backyard park needs a outdoor sound system! Lol Catching up on your vids All the way from nz

[@owengrantham4762]

Adam when I went on a holiday to vietnam the pho over there is so good because thats where it originated from.

[@marconeill3883]

adam i love the Christmas tree its a great conversation piece😂

[@crawlinoff-road8302]

Hey Adam when you put oil in without a funal turn it up side down you get more control of how much oil comes out try it, it makes things a little easier

[@jarodthorman9161]

tip for putting the oil in. if you don't have a funnel you can just cut the bottom off of an old oil quart and turn it upside down. or you can use the first one you put in. or you can wrap up a news paper and use that if you're really sketchy.

[@FTGU1]

That backyard park is beautiful

[@paulvina1974]

If you want to make less of a mess when pouring your oil, turn the bottle over. That way it won't "glug" and you'll get a steady stream of oil. You can also do it with the bottle on its side. The key is to keep the opening on the upper half.