Randy killed it on the bay! Stoked to get this thing back together next week :) LZMFG.com drifthq.com
Пікірлер: 587
@SirBoostAl0t2 жыл бұрын
Rudnik showing up at the compound was a nice touch, good to see he's looking healthy
@daleking39982 жыл бұрын
I’m in tears 😂😂😭
@jo3lo852 жыл бұрын
Lmaooooo
@boosteroids2 жыл бұрын
At the paint booth? 😁
@kooperrechner81142 жыл бұрын
lmfaoooooooo
@ianrobins88222 жыл бұрын
It’s probably because he’s been on that Bird diet
@jakehennessy32162 жыл бұрын
Randy is a legend love to see more of him
@aftrnoon_ac2 жыл бұрын
THESE BOTS🤬
@666Ketz2 жыл бұрын
Why doesn't he rent the booth😂
@rda66822 жыл бұрын
As an audio video tech, for the speakers, I would probably move the left speaker location further to the left to match the right speaker. Also, I would go with in-ceiling speakers so that you can have the flexibility of moving the wire up to 8" in either direction (the size of the cutout for the speaker will vary). Just use a stud finder and make sure you don't hit anything. It's not as scary as it seems. If you're set on surface mount speakers, then I'd use a glow rod (fish stick, different people call them different things) with a chain taped to the end of it, and again stud finder to make sure you're not hitting anything, open a small hole where you want the speaker and use a flexible magnet (the chain and magent are sold as a kit called a "wet noodle") to reach into the attic, catch the chain, and pull everything through. Then it's just a matter of patching the small old hole where the wire was run.. Also you mentioned it has 6 speakers which is fine for stereo audio, but if you want actual surround sound, add a nice center channel speaker and sit it on that little entertainment unit. That will become your most important speaker for dialogue when watching shows/movies, so don't go too cheap with it. I build home theaters for a living for the last 8 years, so feel free to ask if any questions pop up 🤙
@tpdabomb32 жыл бұрын
As a former av installer, I'd smack whoever originally wired the space for not measuring out the locations of the speakers! Also Harbor Freight sells the sticks in both large and small if they want to grab a set and move the wires
@rda66822 жыл бұрын
@@tpdabomb3 lol agreed
@huckhuckhuck2 жыл бұрын
Always good to see Randy. His energy has always been so cool and calming. He seems like the nicest dude.
@tomahoks2 жыл бұрын
He old friend? Isn,t he?
@lukeallen11462 жыл бұрын
You and collete have been on a roll recently, loving the content
@Bird-nx5ef2 жыл бұрын
Adam: has helped to build engines Also Adam: "a level is the most complex tool I can use"
@Follett21212 жыл бұрын
For sure! This guy is a vibe
@rhysporter71132 жыл бұрын
🤣
@thomasmielcarek72302 жыл бұрын
For the speaker/entertainment center issue. Run a track system so you can have extra lighting and run the speakers on the track. Hide the wires via the track. That way you can have extra lights and stuff and have the speakers where you want it.
@Bandit.Designs.Videos2 жыл бұрын
Or rune a wire chase to put the wire in. Or better move the left one over to Mach the right one so the sound is better balanced. If someone there can do body work on a car they sure as hell should be able to do ok drywall work it’s a pretty easy run over to the correct spot.
@alvinmartinez77582 жыл бұрын
Good to see Randy again! Such a nice dude! And a very talented painter! 👌 good to see Rudnik show his face again 👍
@quo1k2 жыл бұрын
Randy’s such a nice and genuine guy.. would love to see move of him
@levelrideconcepts2 жыл бұрын
Color turned out great. Love the "JUNK" blur lol
@jamiesh53462 жыл бұрын
Assnick
@gavinstarke11842 жыл бұрын
Go into the attic scrape the insulation away to where you want. Take a drill with bit. Get the measurement span of the truss cut a 2x4 or such to the size. Then get some wood screw tap the board into place take the wood screw to sturdy the board into span of the truss then have someone on the ground drill up and bam.. Easy does it.
@Mr180319672 жыл бұрын
i dont think you can get there bro
@knifethrower97332 жыл бұрын
@@sohotimhot752 That's pretty rude Hey
@myflsc12 жыл бұрын
See how that positivity spreads, Randy came thru and by the end of the video showing Adam being so thankful for everything. Love to see it
@Dropbear2372 жыл бұрын
5:40 Use 2 sound bars, centre them and they'll hide the cords going across the ceiling to the speakers.
@smilley7922 жыл бұрын
Good to see Randy on the channel again. Love his work. Must be when he helped Colette pint the barbie z last time we saw him? Also……. As good as the automotive content is, love me some Adam Colette banter while the tv gets bodged. Reminds me of mid 2020 vids.
@bradt92442 жыл бұрын
Rudniks face on the crack got me dead 😂😂
@tytucc35692 жыл бұрын
Love that you brought your old painter back, I remember the old days
@davesracingchannel92612 жыл бұрын
kzbin.info/www/bejne/Y3_bdGOXj9-pd7M
@imFrawst2 жыл бұрын
If Adam welded his own door jams I would be very impressed
@giovannifebus37002 жыл бұрын
Really awesome seeing Randy again. Hope we see more of him in the channel 🔥🇵🇷
@YaBoiDan2 жыл бұрын
That painter seemed like he was having so much fun, that's a genuine dude right there.
@jamesdavies30382 жыл бұрын
Awesome to see randy again. His lz in collet's paint sample would make a cool photo
@synyster_nate2 жыл бұрын
“Mopping is for the ground, for the ceiling you gotta have a stick” wise words
@Sir.Munoz.11172 жыл бұрын
Just happy to see you and other doing well!! Respect to randy and your guys' successes
@jaymainey222 жыл бұрын
Cool to see ya still work w randy afta all the years.
@jasonveto23202 жыл бұрын
I love to see rudnick getting picked by someone besides tommy! The exchanges end up being golden
@griesj812 жыл бұрын
Adam, I'd recommend moving the speakers further apart from center. It'll allow for better imaging and differentiate between sounds from the left and right. Technically, the rule of thumb is an equilateral triangle between the speakers and the listener. Also, you might want to move the receiver down to a lower shelf to allow for more air room above it for heat to escape.
@ckg-qv5gl2 жыл бұрын
I love videos of painting and prepping and it’s so satisfying, keep up the good work Adam !
@markphillips69982 жыл бұрын
I started watching this channel a while ago, you had not long had the cream 240 and been married a couple of weeks. Since then your rate of progress and your work rate have been un-matched and it really shows bro.... I genuinely mean it when I say 2022 is going to be awesome for both you and us as followers! Congrats from the UK bro, keep on keeping on
@steyer-crmg2 жыл бұрын
For repositioning the speaker wires you could cut a groove 10-15mm wide, place the speaker wire in it then plaster over it and sand flat.
@jayquansmitj88702 жыл бұрын
You’ve have come a long way my boi has been dedicated to what he loves in life been watching you when you was just doing bmx keep doing Whatchu been doing
@connorb90972 жыл бұрын
Randy my guy! Haven’t seen him in ages. (Literally years, I think 350Z, if not then Cream S13 brown CAGE... holy how the days fly by) My day is very made
@jkflorida2 жыл бұрын
The Rudnick logo on buddy’s crack was hilarious!
@avrn10942 жыл бұрын
good to see Randy back in the vids
@shadowsandfire2 жыл бұрын
My Evo is painted starlight white, its very similar pearl white with a very faint blue hue I absolutely love it with full gloss polish it POPS!
@SKOMPAS2 жыл бұрын
For the speaker wires place the speakers where you want them with the wire stretched over then with a router (or a razor blade) make a channel for the wire to sit in then fill or plaster over the wire, not the right way to do it, by far the easiest way to do it with pretty perfect results.
@SKOMPAS2 жыл бұрын
What keywords did I have in my comment that spawned the bots?
@traxxasslash952 жыл бұрын
@@SKOMPAS none, they've just been rampant on youtube lately
@AlenGarner2 жыл бұрын
Excited for this build again
@forever_tipsy_78012 жыл бұрын
So happy to see Randy busy 🙏
@VinceFung2 жыл бұрын
Glad to see rudnik helping randy paint the JZX. Couldn't be done w/o him tbh
@treyyoder2 жыл бұрын
Randy is such an og on this Chanel iykyk so glad to see him at the compound
@jasonwong9112 жыл бұрын
Adam is gonna make the e36 a pro drift car😂
@Ryan-op9bk2 жыл бұрын
Not sure if its just me but I'm so stoked for this year its gonna be awesome cant wait to see the builds this year. Adam is what we would all do with a lot of money and I love it keep doing what you want we love it!
@yourmothersfavouritehouseguest2 жыл бұрын
Cut a slot in the drywall just enough to fit the cable and then caulk it
@markireland55012 жыл бұрын
Great to see Randy back! It's been a minute
@jeremygotair2 жыл бұрын
Adam since he got the compound has had a lot of really good and different content, excited to see what the future has in store for the compound
@healey.232 жыл бұрын
The fitment on that receiver tho 🌊
@JPel19732 жыл бұрын
Klipsch are great speakers Adam! Especially their reference series and pro series! Nothing beats a pair of corner horns with a nice amplifier! I myself have all reference series……..with a Pioneer Elite receiver ! It ROCKS!
@AskingKevinn2 жыл бұрын
Just blessed my weekend 🤌🏻
@indoe73752 жыл бұрын
As a painter, I love to see Randy love and respect the craft 🙌. He's a gangster
@thomasaponte77292 жыл бұрын
GOD BLESS LZ KEEP GOING BRO U INSPIRE ME ALOT
@TimmyTickles2 жыл бұрын
Love when Rudnik shows up at the compound!
@maxxpennington2 жыл бұрын
Love Randy’s attitude.
@mikejovi9802 жыл бұрын
Cool to see Randy back 👌
@NS.Capone2 жыл бұрын
Go to Home Depot get 20 minutes mud, 4 and 6 inch mud knife,mark your new holes where you want your speakers, drill them out to right size with hole saw but save the round piece that comes out of it(if it’s a big enough hole) use a fish tape feed it thru new hole to old one, tape wire to fish tape very good and pull it through to your new hole. Make sure you have enough wire to do what you need to do with it. The 20 minute mud is sorta like bondo and will be easy to do if you know how to do that. If the hole is larger than an inch n a half I recommend screwing backing up inside the hole to secure the little piece of rock you’ll need to place up their. Mix mud up place it on ceiling as smooth as you can, wait till dry, sand out with 120, finish coat sand with 220 lightly until you like it. It’s a Novel but hope it helps 🤷🏽♂️
@devinbuchhorn2 жыл бұрын
You know its gunna be a banger if Mike puts a preview at the beginning!
@joshthurkettle54062 жыл бұрын
Love the vid bro, where’s best of 2021 pt 2 at ? Can’t wait to see it !!
@DrifterAtHeart-Woocash2 жыл бұрын
Adam living the dream, hard work pays 🤘🤘🤘
@c6kid2 жыл бұрын
The life everyone wants to live, keep up the grind been here since the bmx days🤝
@motojay25492 жыл бұрын
Leaving for boot camp tomorrow can’t sleep at all so I’ll be up all night watching Adam Lz being a GOAT.
@lukeofearth10362 жыл бұрын
Your list of painters is gonna need to include Collette bro.
@angelitomiguelbatang51952 жыл бұрын
We need the flat screen update!😂 Love the engine bay tho it's 🔥🔥🔥
@juriehanekom36412 жыл бұрын
Hey Adam the plating for the Toyota fasteners mostly is (zinc plating de embrittlement)
@Lowcoupe2 жыл бұрын
Love how adam stays supporting the homies side hustle.
@mattwebster96492 жыл бұрын
My day always gets better when you post adam
@whocares9612 жыл бұрын
The whole shop is freaking awesome - love it! Greetings from germany ;-)
@marcoestrela49952 жыл бұрын
That fact that it's tri stage and it's that matched 👌 hats off
@javierrivera76812 жыл бұрын
Thanks for the shout out Randy.
@doomdreaming2 жыл бұрын
That lounge area is sick!
@LJT13242 жыл бұрын
Mike with the cinematics 🔥
@kellysandford18772 жыл бұрын
Get a Franklin ProSensor stud finder for seeing if a piece of framing is gonna get in the way. They are the best stud finders and are just nice to have around. Don't be scared to patch drywall. Less is more when it comes to sheetrock/compound. Fiba fuse tape is great to use if it's in your area. You'll probably have to paint that whole section of ceiling after the patch but it wouldn't be that bad. You know you gotta do it right!
@zacharias_b2 жыл бұрын
I subbed years ago for the bmx stuff, fell out of it and resubbed a few month ago and love the content!
@colinclarke93792 жыл бұрын
the yamaha receiver part hit me in my yamaha heart
@overbehindunder2 жыл бұрын
Great video, Randy is a superstar.
@switch_flip98112 жыл бұрын
Hard work pays off remember if adam can do it you can to! Go get it!
@maxfield75222 жыл бұрын
So cool seeing randy again
@AnthonyWTFC2 жыл бұрын
For your speaker issue, decide where you want you speaker to go, drill a hole at a 45° angle towards where the existing wire is. Get some Klein fish sticks/glow rods with the hook attachment that will come with it. Snag your wire (he’ll use your borescope for your cylinders so you can see where you’re sticks are going) and pull it through. Also, make sure to use a cathedral mount for your tv if you’re mounting it from the ceiling. Also, if you don’t like the length of the drop rod for the ceiling mount, you can go to lowes/Home Depot and get 1 1/2 rmt (electrical conduit) cut and threaded and make sure they use plumbing thread and not straight cut threads. I do A/V for clubs and restaurants here in Arizona.
@aarons55852 жыл бұрын
Good to see Randy again
@KevTubeee2 жыл бұрын
Can't wait to hear JIMMYMANE - JZX WITH GANG bumping through the speaker setup 🔊
@aronaltmets24672 жыл бұрын
Seeing the notification, that Adam has uploaded, makes me smile :)
@jamiestrong79932 жыл бұрын
Good job Randy. People underestimate the skill it takes to lay down like that.
@SethHollingshead2 жыл бұрын
Omg dude leaving old TV in the cabinet and hanging new on cabinet doors...ballin lol
@christopherwarnecke48582 жыл бұрын
If there's an attic space where the speaker wires are, have someone climb up there and fish the wires to where they need to go. If no attic space I'd just leave them because you're gonna have to cut the drywall open to move the wires
@lukehanley24342 жыл бұрын
Keep up the great work adam 🤙
@caribbeankids69072 жыл бұрын
Randy is so Awesome. Always sick to see him on the channel
@jovicatovarlaza93392 жыл бұрын
You’re probably already doing this but please hire randy to use your shop as his spot and just pay you rent and then compensate him for your own cars he’s doing. Love this guy he needs to grow.
@MrMackd14182 жыл бұрын
Make a compound channel so we can see more in depths with the builds. Let the guys around the shop record progress n shit
@domesticterroristAtari2 жыл бұрын
like the hoonigans other channels
@kennethosborne83592 жыл бұрын
Find where you want to move the speaker to drill a hole and use a flex stick to get to the hole you are replacing.
@steyer-crmg2 жыл бұрын
For repositioning the speaker wire, you could just cut a channel 10-15mm wide and place the speaker wire in it and plaster over then sand it level/flat.
@terpsinc78032 жыл бұрын
Adam, If you did put up drywall on that center part you could get a projector and it would look sick!
@Barry.ONeill2 жыл бұрын
Looks well very hard colour to get to match perfectly 🤙👌💯
@mrtangyfb79602 жыл бұрын
can tell randy can paint the way flick the gun at the start %100 fire
@andreicuratchia82672 жыл бұрын
Such a wholesome guy my boy randy👌
@luisdavinci10232 жыл бұрын
Randy’s a beast 🔥🔥
@joseacuna32392 жыл бұрын
Painter look like a solid dude, no bullshit and nice work
@james-96472 жыл бұрын
Regarding speaker wire just cut out a channel deep enough for the cable then fill over with filler 👍
@JosrRocks2 жыл бұрын
The painter gets down! Really solid job
@SHisTbox2j2 жыл бұрын
Bro. The way Mike ties these shots together weather it’s a little edit or tilt it just all flows so good it’s awesome to watch.
@CoolTiger922 жыл бұрын
If the wires are not too far off the same measurement from the wall, mount both speakers to the left of each wire or to the right of each wire depending which way they need to go to gap up correctly
@chevycortez33832 жыл бұрын
Howdy Adam. Big fan long time subscriber even before the Feed Bert 😂🤣😂 but anyways. For your speaker wire location issue I would suggest speaker bars and you can mount them however you need and run the wire behind them so they are centered. Lmk what you think man.
@dcracing48662 жыл бұрын
Loving the content. I would love to see a time attack build but I guess that’s just me
@Ranor2 жыл бұрын
truee
@rainedrop142 жыл бұрын
the evo is kinda that, but i agree
@ilikemakar84602 жыл бұрын
Think that is the goal for the red evo, eventually
@austinhyer2 жыл бұрын
Sunday content thank you Adam. Frick football
@stuartmidgley30222 жыл бұрын
You’ve already gotta patch the ceiling so what’s a few more to get the cables where you want them… it’s not expensive or hard to patch dry wall… alternatively if you’re that worried about it you could remove a few roof sheets and go in through the top add some additional blocking for tv while you’re there.