Add Needle Positioner to Your Juki DDL-8700

We show you how to assemble, attach and synchronize the needle positioner, motor, and control box onto your Juki DDL-8700. If you're mechanically inclined and purchased this kit from us, you should be able to figure out how to attach this whole system to other machines as well.
You can purchase this kit here www.cutsew.com/KM-NP-750-Need...
If this looks too complicated, we will soon have this as an attachment option available on our website. www.cutsew.com/
Here are some helpful links for the assembly of the Juki DDL-8700, which is not detailed in this video:
Full Assembly of Juki DDL-8700 • DIY Assembly Juki DDL-...
Assembly of Table legs only • DIY 8700 Section Three
Drop in the Head • DIY 8700 Section Seven
And here are the sections outlined:
0:00 - Unboxing the kit
0:28 - Install Control Box
1:15 - Attach Motor Mount
2:37 - Tack Cables
2:52 - Attach Motor
5:58 - Connect Cables
6:32 - Power Needle Positioner
7:15 - Add Light
7:33 - Tie down Cables
8:16 - Add Table Legs
8:30 - Drop in Head
8:39 - Add Handwheel
8:45 - Attach Belt
9:03 - Tighten Motor & Add Belt Guard
10:19 - Add Bobbin Winder
10:35 - Add Upper Guard
10:46 - Add Needle Positioner
12:29 - Parts Needed
12:33 - Tools Needed
15:13 - Test Attachment
15:31 - Synchronizing

[@theloves23]

Just what I needed!! Thanks for sharing!!

[@cts19816]

Good video👍🏻👍🏻

[@CutSew]

Thanks 👍

[@stevelowe3525]

Hello, What size pully is on the motor in the video please? Mine has a 75 mm but I want to fit a 50 or 55 , would that be ok/ Thanks Steve UK

[@thairyduque]

Hi,I want this attachment, can you please give me the link to buy it?,thanks

[@genevagolah9283]

Hello, please where can I find the black piece you used instead of the white piece that came with the kit? What's the name if I decide to to find it at my local hardware store? Or online? Mine does not work because the white piece keeps wobbling...it's useless.

[@2010stoof]

So, I ordered my 8700 with this but it came with the screw and piece. Can I have you send me the one piece black piece so my synchronyzer doesn't wobble so much? The issue is definitely the piece the bolt goes through center hole is not center to the outside where the synchronizer screws onto. You guys sent me a new white piece the bolt connects to hand wheel but didn't help. Also, this is not how you guys installed mine at all. The silver piece that goes into bottom of synchronizer was bent at the bottom and screwed into the table with one of the winder's bolts ... Didn't use the brass threaded rod with the nuts at all. In fact it didn't even have them with the machine.

[@CutSew]

Please call 404-321-3607 and we will see if we can help you.

[@muhammaddaudsoomromdaudsoo6575]

Price in Pakistan japani or korin