AFFORDABLE Way to prevent tire rubbing! | (BMW G8X M2, M3, M4) R44 Enhanced Clearance Kit Install

This kit from ‪@r44performance‬ is a simple and easy solution for the front wheel arch "rubbing" issues that owners experience, once you begin modifying suspension, wheels, etc. I break down the install process step by step in this video with tips and tricks I learned.
.
.
.
.
Filming equipment used for my video production:
Camera with lens: amzn.to/3OcYae6
Camera SD Card: amzn.to/3SqvO2q
ND Filter: amzn.to/3Sr1g0D
Extra Sony Battery: amzn.to/48KGizl
Wireless Mic: amzn.to/3HzDEQY
Lav Mic: amzn.to/491ZecP
Shotgun Mic: amzn.to/48KFlal
Camera Gimbal: amzn.to/3u3dlzC
Gimbal Handle: amzn.to/42bWRSh
Drone: amzn.to/3OaJxIc
Drone SD Card: amzn.to/48ItfyF
Drone ND Filter: amzn.to/4b3Vuct
Gear Backpack: amzn.to/3HwsfkY
Camera Suction Mount: amzn.to/426DQAV
Tools in my garage:
Low Profile Floor Jack: amzn.to/42c27W9
Low Profile Ramps: amzn.to/3u32Lc2
Low Profile Wheel Chocks: amzn.to/3vUYJmn
Jack Stands: amzn.to/4b88opN
Hex Head 2mm Driver:
amzn.to/3u81d0j
DISCLAIMER: Links listed in this description might be affiliate links. If you purchase a product or service with the links provided here, I may receive a small commission. There is NO additional charge to you! This helps my channel to continually grow so the best content can be produced for the viewers. Thank you for your support!

[@jordanchoi1522]

underrated tutorial, thanks!

[@legacydriven]

Much appreciated!! Glad it helped you 👊🏼

[@darrenboston342]

Never had any issues at all & I’m 25 mm lower on the front than factory spec.

[@legacydriven]

Wow, that’s interesting. Do you have stock wheels or aftermarket? Spacers?

[@darrenboston342]

@@legacydriven I have the M4 CSL wheels on. No spacers .👍

[@legacydriven]

@@darrenboston342 Gotcha. Good to know 👊🏼

[@berzerker4998]

You're less likely to have issues only lowered with no spacers, but many of us with spacers do have the issue. I bet you also do have the issue, but only in certain situations. Try reverse vs drive and low speeds.

[@user-zs1br6yo6b]

🔥 👍🏼

[@legacydriven]

👊🏼

[@RedRockscheffleng]

I cant find them on the r44 performance site?

[@legacydriven]

Hey, no worries! I got you. See below 👇 r44performance.com/products/r44-bmw-g8x-m2-m3-m4-enhanced-clearance-front-wheel-arch-kit?_pos=1&_psq=G80+enhanced+clearance&_ss=e&_v=1.0

[@khxmi]

0:18 not yet, but soon

[@legacydriven]

😎🤘🏼 what spec? (If ordered already)

[@khxmi]

@@legacydriven a frozen portimao blue m3 comp in a few years

[@legacydriven]

@@khxmi Nice! Love that color. That time will come faster than you think 👊🏼

[@mokrushynoleg2755]

Dont really get how that should help you with the clearance. Even if you have those type of problems try next time a heat-gun and massage it in. Done

[@legacydriven]

Right, so the issue is that when you “heat the fins and press them in” it essentially flattens them out most of the time which can inadvertently reduce airflow from escaping from the aux radiators. Also, this piece I installed sits on the back side of the fender liner so it actually offers a few inches of extra clearance! Which is more than enough. Lastly, this still allows adequate airflow while still providing protection from tire debris being thrown onto the radiators. 👍🏼 in my opinion it’s a much more complete, long-term, solution.

[@berzerker4998]

This is a much **much** better solution than just melting them.

[@legacydriven]

@@berzerker4998 Agreed 👍🏼