Ford Mondeo Mk4, Front Shock Absorber Strut Top Bearing /Bush Replacement. How to replace and align a ford mondeo mk4 front suspension strut top mount assembly.
Пікірлер: 178
@scarletturk38922 жыл бұрын
Excellent 'How to...'. 👍 One thing tho' ... Mole Grips...on the rod of strut that's being reused ?? 🤔
@Caradonia4 жыл бұрын
I bought a mk 4 mondeo titanium X last week where the previous owner hadn't aligned the marks up properly. The squeaking noise was unbearable. Thanks for the videos, especially this one, they're a great help! 👌
@alan4x4 жыл бұрын
cheers
@chriswarner86233 жыл бұрын
Paul Kilgour you have just answered the question to my car ive just replaced mine. Its squeaking i guess its coming off again
@normancassin64163 жыл бұрын
That vid has just made my next mondeo job so much easier. Excellent!
@kremnin2 жыл бұрын
Thanks mate... I'm doing both sides on my Mondeo mk4. along with new struts, springs, boots, track control arms, track rod ends... and anything else that I find when I tear it down. As a very old Ford trained mechanic, I was trained in Cortina, Capri, Granada, escort, etc. This will be my first Mk4 Mondeo total front suspension, so I found this very helpful... Good man...
@alan4x2 жыл бұрын
cheers jim, hope all goes well
@voydnaught13973 жыл бұрын
Your videos are excellent mate. Thanks!
@trademarkuk014 жыл бұрын
A Good no nonsense video. Also applicable to the Volvo 2008-2012 range that share the Ford platform.
@7999rahul4 жыл бұрын
Damaging the strut rod instantly
@Ian-of9oi2 жыл бұрын
Yes. I can’t believe he did that.
@konrad75982 жыл бұрын
Why ?
@Ian-of9oi2 жыл бұрын
@@konrad7598 clamping the pliers on the shock sealing surface will damage it. Now the strut seal will get damaged and leak.
@CoastalWheels Жыл бұрын
Yeah I cringed and came straight to the comments to see if anyone else noticed too😂
@sirlordbabish38732 ай бұрын
The struts are tougher than the mole grips - no damage
@nippletweeks8647 Жыл бұрын
Just wanted to thank you for this video really helped me and my dad today I actually found who ever changed a damper or spring fitted drivers side damper 90degrees out 👍 thanks bud top man
@alan4x Жыл бұрын
Glad it helped, thanks
@milankorbel93323 жыл бұрын
Thank you very much for the great video. It helped me a lot
@damjan95484 жыл бұрын
Very informative! Its really nice and super handy you are making these videos, kudos for doing so mate its very aprecciated and super helpfull. I need to do this myself too but i have no shock vice thingy to compress the spring and i'm hesitant to do the job. I was wondering how many of these have you already done since you have soooo many Mondeos at Steve's? I really like the fact you explain how any particular issue affects the car and its performance beacuse i learned about issues my car has i wasnt avare it had. I was aware of the fact something was wrong but i had no idea where exactly to look and i was almost about to buy a whole shock absorber assembly for this.... In another words you saved me some money. Thanks! Another of my problem with my 2007 S-Max 2.0 Tdci engine is that engine is jerking a bit at 1300-1600rpm in 3 or 4 gear while trying to hold a steady speed at 50 km/h, it stops if you add or release accelerator pedal. I took it to a shop, paid them to have a look, they didnt find an issue and suggested i replace the turbo, simply because of my statement that i noticed some boost drop at 2000 RPM in OBD graph on my phone while driving. Car also hesitates for a sec at the same time but pulls strongly onwards. I have no idea on where to look for... could it be turbo boost & vacum solenoid/valve? I could manage to replace it myself if needed and its not that very expensive part. Is there a way to know/test the solenoid valve without multimeter or even disassembling the valve it self? Should i replace it?
@andywatkin253 жыл бұрын
Thanks for the video Alan. I have changed the strut bearing after watching your video. The biggest problem I had was with the ball joint. Needs a fair bit of muscle and a good method...
@alan4x3 жыл бұрын
Nice work!
@BlakeCDS Жыл бұрын
I found the strut top nut most difficult, gave the ball joint a few whacks with a big hammer and it popped loose with pressure from my foot. Someone told me it's the shock with a hammer that loosens it, trying to lever it to break the taper will get you nowhere
@simpleinstants9 ай бұрын
Great video. I was looking for a video to show me this for my Ford Fusion top bearing replacement.
@TheDaf95xf5 жыл бұрын
Nice one again Alan 👍🏻
@EcoMan-te4vu2 жыл бұрын
I'm about to do this on a Galaxy III, glad I found your video..... thanks so much for posting 👍
@alan4x2 жыл бұрын
cheers ecoman, hope it goes well
@sanjinred4 жыл бұрын
Informative vid, but I don't understand why you are removing the entire assembly. Why not just remove the bolt for the damper on the hub then pull the entire hub assembly down with a bar and drag out the damper and springassembly
@boddisk Жыл бұрын
I tried that. Could not get the hub low enough
@JK-we1dr2 жыл бұрын
Appreciate the channel, I enjoy watching and learning and I can only image the time and effort u put in. Thanks for sharing
@boxatricks5 жыл бұрын
Thanks for all the videos but a Vice grips on the strut 2" above the seal. You've just killed the shock. The whole purpose of the plastic gator is to prevent damage to the polished surface of the ram and in turn the seal keeping oil and pressure in the shock.
@alan4x5 жыл бұрын
thanks for pointing that out lol....yeah not the best practise but i will say those strut rams are some hard metal and even vice grips would struggle to mark the shaft.....the thing is i put the grips on every shock i do in the same place and never had a problem.... it is too much aggravation to try and hold the ram from the top where it should be held and undo the 18mm nut..so i go for the easier option, i will carry on putting grips there but yes, probably best to put the grips higher up lol, thanks..good comment
@garybrown55005 жыл бұрын
Fold some cardboard in jaws first, that normally makes sure damper rod remains unscathed.
@boxatricks5 жыл бұрын
Gary Brown I used an 18mm off set ring (imperial equivalent because I've no metric off set rings) with an Alan key. If I was using a vice grip I'd likely grab it up at near the bolt. If that part goes through the seal you've just done a General Lee and written off the car anyway😊
@Mixz18905 жыл бұрын
@@alan4x I was about to point out the same thing...Anyway, if you put vice grips on there, do it at the top of the shaft because that part never goes inside and if it gets damaged, then no problem, at least thats how I do it. The top also tends to be corroded because of the bump stop there collecting moisture around it.
@Grinder-one5 жыл бұрын
@@alan4x I insert that new non slip rubber material between the jaws of the mole grips, not only does it stop the teeth damaging the ram, but because it's so grippy, you don't even have to put the grips on very tightly.
@kayleighwhitehurst62742 жыл бұрын
great video. I've got the same problem and I'm looking at doing it myself. I don't have a spring compressor though, so have you got any helpful hints on how to do that at home?
@PeterEndelt4 жыл бұрын
Nothing like a good piece of hickory 👍
@stefan_sth5 жыл бұрын
Hi Alan, about the rusty bearings. My car has big problems with those strut bearings. 35.000 kilometers and they will have to be replaced. The second time I had to replace the strut bearings, I asked for and got the old strut bearings back, took them apart and guess what - rusty raceways and balls. I got new bearings, took them apart, wiped of the grease. Then I did apply salt water resistant grease (used on boats) and reassembled. The bearings were still fine 110.000 km later when I did replace the strut assembly due to a broken spring. I did regrease the new strut bearings - sure. Bad grease sells new parts....Good grease saves money...
@alan4x5 жыл бұрын
so many parts are made cheaply and sub standard
@barnierobin57348 ай бұрын
Good video. Anyone attempting in the future should know when he says to clean the threads above those 21mm nuts he really does mean it.
@markwenham83602 жыл бұрын
This guy is brilliant! Tells it the way it’s easy to understand, thanks pal! 👍🏻
@DexterXxX5 жыл бұрын
My mechanic didn't do it properlywhen put new shocks and bearings in and it coased funny steering, thanks to your video I managed to find issue and fix it myself, thank you
@26vasy4 жыл бұрын
hi,what of funny steering? i have some issues but i wanna know more from you
@danielkatona18665 жыл бұрын
Can you believe that I bought an MK4 which had receantly the shock absorbers changed in the dealership and they put the bearing wrong ? Both of them. The tabs on the right were put facing the front of the car, and on the other side with them facing to the boot. You cannot imagine how disastrous the steering was, could not go strait whatever I did. Put them back the way you explained and everything is excellent. Thanks for these tutorial videos that you are doing. Maybe dealerships should take a look here also.
@alan4x5 жыл бұрын
lol... yes when the top bearings are fitted in the wrong position they sit at the wrong angle they are intended to sit at and cause havoc with the steering and quite likely to fail very quickly as in the bearing casing breaking.cheers
@krico228 ай бұрын
Thank you Alan for great videos. After replacing struts and springs my mk4 😊have lost stability, grip and is tracking. I notice new springs is somewhat longer than originals were as new. Any ideas? Or shoul I take it directly to control wheel alignment?
@hoantran97445 ай бұрын
Great help, I did replace the shock absorbers for my mk4. Btw, I'd like to ask you that could we adjust camber and caster manually? Thanks Alan !
@frogeye222 жыл бұрын
Hi Alan, Is there much that needs replacing with the 'bush' part (metal bit) or would just the new bearing (plastic bit) be ok?
@chriswoolley93434 жыл бұрын
I'm replacing shocks, springs and top mounts on my mk4, which way up do the springs go?
@boxatricks5 жыл бұрын
Otherwise Alan. Thanks for all the how to's
@savvasgreece87005 жыл бұрын
thanks for details
@James-vw3vt Жыл бұрын
Spot on m8 good video
@fostexfan1603 жыл бұрын
Is this the same procedure for the mk 3 Mondeo? are the components the same? Very informative
@messirah5 жыл бұрын
Love the simple clear videos. Could I ask have you had to replace a cylinder head temp sensor on your mk4?
@alan4x5 жыл бұрын
lol, i try to think simple....do you know what...never ever have i replaced a mk4 mondeo temp sensor.....let me know what engine you have and i will locate it as i have two different peugeot 2litre diesel engines on the floor
@messirah5 жыл бұрын
It's a 1.8 tdci 125 diesel. Wasn't it's the cylinder head temp sensor... reading on the subject seems there is a coolant temp sensor and a cylinder head temp sensor... n your vids are informative When working on a car...
@Stop..carry-on5 жыл бұрын
Yikes - not the best place to put the mole grips
@spandon4 жыл бұрын
Not sure why anyone would do that but explanation here at 9 mins kzbin.info/www/bejne/aWKrlqd3fKpprJI
@danc20142 жыл бұрын
Any dents will damage the oil seals and leak. If it were a new replacements the warranty is voided if you have dents on the struts. The top strut nut has a place for a hex key to hold the rod to remove 5.45
@wereweere Жыл бұрын
Just spent £90 on kits for both sides, with new top bearings, rubber bumper, and damper dust covers from Ford for S-Max/Galaxy; they arrived branded SKF. If you want to save money for OEM quality you can buy the same pair of SKF top bearings elsewhere for £25.
@charlesscottkelly5 жыл бұрын
I have the same car but it has a factory sports suspension that I cannot stand far too hard, does any one knows if its just a case if getting new springs fitted to make it a softer ride or it it more complicated.
@Chrismartin882 жыл бұрын
Hi Alan I have a what I can only described as marbles rolling around when I turn the steering wheel or rock the steering wheel only when the car is under power, when Parker no noise at all do you have any idea what it would be thank you
@charlesscottkelly5 жыл бұрын
Any one know if the difference between the standard suspension and the sports is it just the shorter springs or is there other things different.
@bizon82rp3 жыл бұрын
Hello Alan, could you write please how long it shoud take to replace that bearing on one side?
@motorsme53704 жыл бұрын
Once had a knock near the left front wheel... First I thought its a strut bearing, but turned out to be a lower control arm bushing... :D
@anguswood93063 жыл бұрын
I’m having trouble breaking the second tapered ball joint any ideas?
@duiliomeglio3730 Жыл бұрын
Thank you so much pal!
@26vasy4 жыл бұрын
changed front suspension struts top bearing and bush together with shock absorbers related to steering wheel wooble on high speed and weird turning on low speed,but the result is the same...wheel perfect balanced....i dont know what else to do
@tompwh Жыл бұрын
I did one of these shocks today, but I forgot to slide the bump stop onto the bearing. The bump stop is still inside behind the boot like yours was, will it be okay seen as it is still there on the shock?
@jimbola85772 жыл бұрын
Hi Alan, I’m having some steering issues with my mk4, generally loose steering and it bump steers when I hit a bump with the left wheel, steering will pull to the left. Could this ge a worn top bearing do you think. Thank you in advance
@drecarspa-auto67762 жыл бұрын
Hello Alan, I have a mk4 with ivdc suspension, do you think I could change it to a normal one? Many thanks
@danashworth41975 жыл бұрын
Like the videos Alan! Out of interest what air gun are you using? Looks pretty good and I’m looking for recommendations
@alan4x5 жыл бұрын
hi that is a 3/4 drive which i used for buses some years back as i broke my cp 1/2 inch air gun...it is a bit heavy for cars but its all i have ....its a minefield to buy a good air gun but cp has always been a good brand
@bjornolavsjogren Жыл бұрын
<a href="#" class="seekto" data-time="47">0:47</a> the hub nut/drive shaft bolt, does it have to be replaced? Haynes says 45 Nm of torque plus 80° rotation. Seems it stretches a lot when mounting.
@bendoherty77214 жыл бұрын
Noooooooooooooooiooo. I had to unlike the video. Never put grips where the rod will travel. That’s a new damper straight away. Should of put it at the top where the rod will never travel
@amblernectar3 жыл бұрын
I was wincing watching him do it
@sheffielduk3428 Жыл бұрын
I bet he was absolutely devastated about you removing you're like mate, hope Alan recovered OK from it
@user-qo2ze3mi6e4 жыл бұрын
With these pliers, you injure the stem of the shock absorber and create a precondition for flow through the sealing ring. Am i wrong?
@alan4x4 жыл бұрын
those shock absorber shaft is case hardened steel..the pliers won't leave a scratch...if you ever get an old shock absorber..clamp some pliers onto the shaft and try to damage the shaft...then you can answer your own question and know the answer for sure, thanks,
@user-qo2ze3mi6e4 жыл бұрын
@@alan4x Thank you for the answer!
@pawek95283 жыл бұрын
@@alan4x Any scratch will damage seal
@danc20142 жыл бұрын
I have seen scratches and wear marks on the shafts from dirt. They are not as dent resistant as you think.
@taskhunters52455 жыл бұрын
Nice video Alan. One other thing that could be related, when I roll along the m/w and ad and release accelerator pedal i get sligh bang under the car towards gearbox/driveshaft near side. Will it be a shaft or gearbox mount or perhaps engine mount. Video about this problem would be much appreciated. Thanks man👍
@alan4x5 жыл бұрын
more than likely the rear lower gearbox mount that stops the engine swaying to and fro when you accelerate and decelerate
@taskhunters52455 жыл бұрын
@@alan4x that's what I thought. Thank you mate👍
@artjag13 жыл бұрын
good info !
@t5jerry5 жыл бұрын
Well Alan, your great at making the videos, shame you couldn't answer me questions......
@alan4x5 жыл бұрын
what question
@fishdisco35872 жыл бұрын
Brilliant!
@vandeklop2 жыл бұрын
Good Video, but NEVER DO THAT!!!! @<a href="#" class="seekto" data-time="275">4:35</a> Please use a cranked box wrench and Allen key!
@databrus14 жыл бұрын
Hi! This is the same shocks on a volvo v70 08-16.
@fercibaci12 жыл бұрын
why did you change hub as well? the shock bearing is the main wear part I think... or?
@Colin6239 ай бұрын
Does the alignment marks on this car apply to a Focus Mk2 front suspension ? I actually have a Volvo C70 II but this has the same suspension set-up as a Mk2 Focus !
@danikahn53784 жыл бұрын
I have had new front shockers on my mk4 mondeo but there was a squeaking noise I took it back to the garage they said the mounts need replacing. Charged me another £90 on top of the £180 I paid originally. Should these have been changed when the shocks were fitted...or at least checked? I would appreciate the advise. Great video as usual.
@alan4x4 жыл бұрын
the top mounts are removed in order to change the shocks so should have been checked, well that's if they knew what to look for
@xFrankHarrisx3 ай бұрын
When you turn the steering Wheel, with damaged shock absorber Stut, do you hear the sound in the car and/or on the shock absorbers? I have the following problem: when my 2.2l diesel is cold, you cant hear anything, but after a while, when you drove a bit, the turning of the steering wheel sounds like metal rubbing on semi wet gum. The mechanic, i speak to told me, it could be the dhock absorber stut or the wishbone dampeners.
@Badgertronix5 жыл бұрын
Any reason why you take the whole strut out rather than just the shock? Haven't had to do this on my one yet
@alan4x5 жыл бұрын
hi... good question...its now just the way i prefer to do the job...i find the shock absorber is sunk into the hub quite deeply which means pushing the lower arm down a long way or removing the lower ball joint anyway and separating the hub on the car but these taxis have been around too many steam cleaners and the 15mm bolt holding shock to hub tends to get seized so for the extra trouble thats how i do it now lol
@darkwaterblue5 жыл бұрын
The lower arm does not go low enough to clear the hub from the strut anyway. Guess you could compress the spring while it is still in the turret, its only about a inch you need to gain.
@Badgertronix5 жыл бұрын
@@darkwaterblue I've only done the Focus which separates quite easily. I'll have to dig out the Ford manual and see what it reckons
@tsb30933 жыл бұрын
@@alan4x what you say makes sense, but is it not a good idea to try to remove that bolt connecting the shock absorber to the hub assembly first and if it comes loose ok then you can remove the strut from the car without the hub attached. It would surely make it easier to refit the strut if the weight of the hub assembly was not still attached to it.
@chrisnugent97255 жыл бұрын
Hi Allan great video just need a bit of help my car failed it s mot due to the off side front strut bracket no longer works and fouls on the wheel which has caused groves can't find the part of code
@alan4x5 жыл бұрын
i am not exactly sure what you are talking about..do you mean the anti roll bar drop link❓
@radasmadass2370Ай бұрын
In my volvo s40 II I only unscrewed stabilizer link, half axle bolt , schock holding bolt (15mm) and 3 bolts on top. Not make a sense to dissambly it all.
@upyourarse12 жыл бұрын
I was gonna ask why your taking the ball joint and driveshaft out til i seen how the bottoms attached, what a pain. How do you stop your mole grips turning around with piston
@noelieify5 жыл бұрын
Alan what make of clutch and flywheel do you recommend for the mk4 mondeo
@alan4x5 жыл бұрын
hi, we normally use LUK clutches...
@klasikklasik98815 жыл бұрын
Если пользоваться обычными стяжками пружины, При разжимании пружины, могут метки уйти на опорном подшипнике, будьте внимательны.у меня в гараже нет таких приспособ,
@Lyons.05x5 жыл бұрын
If you use the usual spring fasteners, When uncoupling the spring, labels can go on the support bearing, be careful. I have no such adapters in the garage, That's a translation for you all.
@bryanwillson16155 жыл бұрын
Hi Alan. Maybe a silly question but is it always necessary to remove the whole strut complete with hub?....I was thinking you could just undo the 2 bolts clamping the bottom of the shock? Cheers.
@alan4x5 жыл бұрын
on these cars the strut slides into the hub quite a way so removing it from the hub in the car is difficult...i just find it a lot quicker with this design to just remove the whole lot
@bryanwillson16155 жыл бұрын
@@alan4x I can see where you're coming from. I treated myself to a laser tools 6396 this week and boy what a great piece of kit. Separating and installing the lower arm really is child's play now and although I haven't tried it for this yet, itv also pulls the strut out of the hub too but I've heard the arm doesn't drop quite low enough to lift the strut out of the hub. Maybe need to compress the spring in situ to get the extra 25mm needed?...Need to do that job yet to comment. The tool isn't cheap but took me just 27mins to complete the job of replacing the lower arm ball joint boot including all prep and jacking.......and I didn't loose any knuckles lol. Keep up the vids btw, love watching. Still can't face changing my clutch yet.... Ssssoo much to dismantle!!! Atb
@markw64109 күн бұрын
Can you remove the pinch bolt and leave everything else in situ?
@deet50725 жыл бұрын
Nice one, heres a suggestion to help us budding amateur enthusiasts, could you think of handy scale of how difficult this stuff is because you make it look very simple! Perhaps something like a scale of How many pints you need to drink to even consider doing the job...
@alan4x5 жыл бұрын
hi, thats an interesting question, i might just do that in future vids...but don't expect it to be very sensible lol......i will say jobs like this one ...taking it apart is the hard part...cleaning the rusty threads etc..having the right tools and not missing your target when swinging a hammer helps..also, using the proper spring compressor as those cheap ones i would not use on these springs, but any questions, just ask, thanks for your comment
@chrisredfield32405 жыл бұрын
I think most of these jobs is about having the space and the right tools. I would love too work there with Alan. The worst thing is trying to tackle these jobs on a driveway. You need to have some mechanical skills which some people just don't have these days
@DavidMoralee4 жыл бұрын
When I brake, or accelerated fast, I hear a clunk from my suspension... Do you think this would might be my issue?
@KashavSehra2 жыл бұрын
I'm having the same sound a slight clunk when braking and acceleration. Did you manage to find the issue?
@stewartbridge51622 жыл бұрын
Your problem sounds like a front lower suspension arm balljoint.
@Lyons.05x5 жыл бұрын
I was refitting a entire shock absorber at school, I was saying to my teachers 'Could i have some help' He said no i can do it myself i was annoyed because i knew i could do it with one person but it's much easier with 2.
@xXSHLAAAAAAAAAAHXx2 жыл бұрын
Did this man grip the strut with grips .please say I didn't see that .
@bazz3244 Жыл бұрын
I have a knock on the rear. Believe it could be the top mounts. Do I still need to compress the spring to get to it??
@alan4x Жыл бұрын
you need to support the lower suspension arm before you unbolt the shock absorber
@bazz3244 Жыл бұрын
Cheers Alan. I'll get a go this weekend. It's driving me insane with the banging
@onsight28225 жыл бұрын
Another brilliant in depth video 👍 My mk 4 will need new shocks soon I'm guessing I can get the bearings changed at the same time ? Cheers
@alan4x5 жыл бұрын
you can ..it would make sense but they not cheap
@chrisredfield32405 жыл бұрын
I did 4 shocks and springs on a mk5.5 escort back in 2000. It was around £12 per shock and just over £10 per spring motorcraft from the main dealer. Those were the days i bought the anti rolebar (£52) but gave up trying to fit it. Could not figure out how a length of metal with so many sharp bends could fit over the steering rack and behind the engine. Ford had it done in 20mins and charged me an hours labour around £60
@boxatricks5 жыл бұрын
Just replaced the struts and bearings on my Mk4 2.0 dsl. €134 for the two struts from Ford. I got Febi the bearings for €30 from the local motor factors.
@algijura3 жыл бұрын
sorry but I did not ht why drive shaft..control arm etc have to be disconnected??
@joshuacorden42952 жыл бұрын
Thanks
@user-si7wn6qc7f5 ай бұрын
i love it.... your good....
@alan4x5 ай бұрын
Thank you so much
@ashleyburnett1344 жыл бұрын
Just did both sides on one yesterday they were ROUGHHH
@priteshchampaneri51013 жыл бұрын
Quick question Alan, does the Tracking need to be done after this?
@alan4x3 жыл бұрын
not normally no
@priteshchampaneri51013 жыл бұрын
@@alan4x Cheers mate, just wanted to double check. I've just had both front strut top mounts replaced under warranty. When I questioned about the tracking they said it doesn't need to be done.
@abdouallahuniverse5689 Жыл бұрын
I thought those strut mount bearing balls are too big, but they are the size of the bike bar bearing, i cant believe what i just saw. The size of the bike bearing bar.
@MrAziraphaleАй бұрын
Had to watch this to see what the garage I took my car to did wrong - I’m 99% sure the knock/rattle I have is down to either the wishbone ball joint not being put back correctly and/or the turreted rubber ring you take from the old top mount and put on the new not being put back correctly. I might just have to do it myself this time…
@alan4xАй бұрын
if the top mount is not fitted in the correct position it will cause a knock and also the new mount/beraring will break up not before long
@MrAziraphaleАй бұрын
@@alan4xfound that the rubber insulator hasn’t been refitted at all..
@metalman4141 Жыл бұрын
Is the job the same procedure on the Smax ?
@barnierobin57348 ай бұрын
Anyone searching for this in the future, it is the same fotlr the s max but on the s max you also have to undo and move one windscreen wiper arm and the wiper motor to get to the top strut screws.
@viisteist13632 жыл бұрын
<a href="#" class="seekto" data-time="280">4:40</a> Rip the hydro system?
@0000FlyerАй бұрын
Does the rack mount and bearing from the mk4 fit the mk5?
@alan4xАй бұрын
No they are totally different
@0000FlyerАй бұрын
@@alan4xwhat exactly is different? I can't find the information. visually they are very similar
@Genove824 жыл бұрын
What are the common symptoms of a bad top bearing / bush ?
@19NinetyUK3 жыл бұрын
Makes like a clunking noise when you turn the steering wheel
@19NinetyUK3 жыл бұрын
Coz the spring can't move freely so it's almost twanging
@ianbirch58114 жыл бұрын
Does the bottom of the strut not just seperate from the hub ?
@alan4x4 жыл бұрын
yes it does but because the shock slides into the hub you would have to bend the lower arm down too far to get it out... i just find it easier with this setup to remove hub and shock together
@ianbirch58114 жыл бұрын
Aye nee worries , was just curious thats all 👍
@roznovanuioan86804 жыл бұрын
if you do that as minute <a href="#" class="seekto" data-time="280">04:40</a>, soon you will need a new shock absorber.
@grzegorzzep23245 жыл бұрын
52.67 woooow O.O
@JayJayJaroo5 жыл бұрын
That's shocking 😆
@adamfergie8711 ай бұрын
It's never as easy at it looks.
@alenmihelcic82673 жыл бұрын
Grips plier damage absorber, but its good for you, month or two, and replace absorbers...
@thejoseandresshow2 жыл бұрын
Why did he remove the strut with the hub?? Why not just remove the strut?
@alan4x2 жыл бұрын
its easier to remove the whole leg rather than try to separate the shock from the hub
@damoblake6000 Жыл бұрын
mine is like a knocking sound over uneven road very annoying nsf
@alan4x Жыл бұрын
sounds like shock knocking...was common on the mk4 mondeo
@damoblake6000 Жыл бұрын
@@alan4x if this is the case would it be new shock absorber? Mine are electric adaptive suspension which are expensive if that's the case I'll just buy all new and do away with the adaptive system.
@alan4x Жыл бұрын
@@damoblake6000 i would check the rest of the suspension first like anti roll bar ball joints etc but if you can't find anything wrong then i would go for a new shock absorber
@colinhendricks2658 Жыл бұрын
Your videos are the best! Volvo P3 owner.
@user-ez6hq2cz7m2 жыл бұрын
Проще было амортизатор вытащить из поворотного кулака.
@Stinktierchen11 ай бұрын
I have an issue. When I break my whole steering wheel starts to wobble. I had this issue long time ago already. I guessed it was the break disks and that they could be bent. I had to change them anyways, so I did. It seemed like it helped for a while but actually the vibration on the steering wheel came back shortly after. Now time has passed and the steering wheel is moving left and right quite a lot when I break. Lately I had to change my tie rods and I changed the tie rod ends too. Thought maybe it will fix my wobbling steering wheel. Nope.. still there. While I had the tie rod ends disconected I noticed that my (right side of the car) of the shock absorber(the whole assembly with the breakdisks and the hinge bearing) . The whole thing seems to be kind of soft and it doesnt seem as stisf as the other side. It seems it has play somewhere, when I turn it left and right. Can this part of the car cause heavy steering wheel movement while breaking?
@abderrahimhaddani73633 жыл бұрын
Taankiouprofeseure
@abderrahimhaddani73633 жыл бұрын
❤
@jamie-hb8gy2 жыл бұрын
Way to much work Just to remove the strut,there's no need to remove the whole hub.
@szelestimur83153 ай бұрын
it's unbelievable that such a "professional" as you put a pair of pliers on the chrome telescopic sliding rod. this is how you can destroy a good factory shock absorber. bravo
@alan4x3 ай бұрын
why dont you come out from behind your keyboard and clamp some grips to the case hardened shocker rod and see if you can even mark it..but you wont will you...just stay behind your keyboard and have mummy clean your mess up
@szelestimur83153 ай бұрын
@@alan4x when i was 17 years old i also did it. I know and learned from it. You should too...I can see you cant handle critism. Then you are angry with me and cry like a little child. Holw old are you pro?
@ap9012 Жыл бұрын
Why did you removed the whole knuckle??? Just 2 bolts and strat is out...